All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre TORGUE <alexandre.torgue@gmail.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 0/4]  Add Ethernet support on STM32F429
Date: Wed,  3 Feb 2016 15:54:31 +0100	[thread overview]
Message-ID: <1454511275-9791-1-git-send-email-alexandre.torgue@gmail.com> (raw)

STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
This series:
	-enhance current stmmac driver to control it (code already available) and 
	 adds basic glue for STM32F429 chip.
	-Enable basic Net config in kernel.

Note that DT patches are not present because STM32 pinctrl code is not
yet avalaible.

Regards 

Alexandre

Alexandre TORGUE (4):
  net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
  Documentation: Bindings: Add STM32 DWMAC glue
  net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
  ARM: STM32: Enable Ethernet in stm32_defconfig

 .../devicetree/bindings/net/stm32-dwmac.txt        |  41 +++++
 arch/arm/configs/stm32_defconfig                   |   9 ++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  12 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  | 177 +++++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   1 +
 6 files changed, 241 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c

-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: alexandre.torgue@gmail.com (Alexandre TORGUE)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4]  Add Ethernet support on STM32F429
Date: Wed,  3 Feb 2016 15:54:31 +0100	[thread overview]
Message-ID: <1454511275-9791-1-git-send-email-alexandre.torgue@gmail.com> (raw)

STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
This series:
	-enhance current stmmac driver to control it (code already available) and 
	 adds basic glue for STM32F429 chip.
	-Enable basic Net config in kernel.

Note that DT patches are not present because STM32 pinctrl code is not
yet avalaible.

Regards 

Alexandre

Alexandre TORGUE (4):
  net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
  Documentation: Bindings: Add STM32 DWMAC glue
  net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
  ARM: STM32: Enable Ethernet in stm32_defconfig

 .../devicetree/bindings/net/stm32-dwmac.txt        |  41 +++++
 arch/arm/configs/stm32_defconfig                   |   9 ++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  12 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  | 177 +++++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   1 +
 6 files changed, 241 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c

-- 
1.9.1

             reply	other threads:[~2016-02-03 14:54 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-03 14:54 Alexandre TORGUE [this message]
2016-02-03 14:54 ` [PATCH 0/4] Add Ethernet support on STM32F429 Alexandre TORGUE
2016-02-03 14:54 ` [PATCH 1/4] net: ethernet: dwmac: add Ethernet glue logic for stm32 chip Alexandre TORGUE
2016-02-03 14:54   ` Alexandre TORGUE
2016-02-04  0:28   ` kbuild test robot
2016-02-04  0:28     ` kbuild test robot
2016-02-12 14:28   ` kbuild test robot
2016-02-12 14:28     ` kbuild test robot
2016-02-13 13:48   ` Joachim Eastwood
2016-02-13 13:48     ` Joachim Eastwood
2016-02-13 13:48     ` Joachim Eastwood
2016-02-22 14:50     ` Alexandre Torgue
2016-02-22 14:50       ` Alexandre Torgue
2016-02-22 14:50       ` Alexandre Torgue
2016-02-22 21:52       ` Joachim Eastwood
2016-02-22 21:52         ` Joachim Eastwood
2016-02-22 21:52         ` Joachim Eastwood
2016-02-23  9:59         ` Alexandre Torgue
2016-02-23  9:59           ` Alexandre Torgue
2016-02-23  9:59           ` Alexandre Torgue
2016-02-23 11:21           ` Joachim Eastwood
2016-02-23 11:21             ` Joachim Eastwood
2016-02-23 11:21             ` Joachim Eastwood
2016-02-23 13:17             ` Alexandre Torgue
2016-02-23 13:17               ` Alexandre Torgue
2016-02-23 13:17               ` Alexandre Torgue
2016-02-03 14:54 ` [PATCH 2/4] Documentation: Bindings: Add STM32 DWMAC glue Alexandre TORGUE
2016-02-03 14:54   ` Alexandre TORGUE
2016-02-03 14:54 ` [PATCH 3/4] net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP Alexandre TORGUE
2016-02-03 14:54   ` Alexandre TORGUE
2016-02-03 14:54 ` [PATCH 4/4] ARM: STM32: Enable Ethernet in stm32_defconfig Alexandre TORGUE
2016-02-03 14:54   ` Alexandre TORGUE
2016-02-03 15:21 ` [PATCH 0/4] Add Ethernet support on STM32F429 Giuseppe CAVALLARO
2016-02-03 15:21   ` Giuseppe CAVALLARO
2016-02-09  9:52 ` David Miller
2016-02-09  9:52   ` David Miller
2016-02-12 15:01   ` Alexandre Torgue
2016-02-12 15:01     ` Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454511275-9791-1-git-send-email-alexandre.torgue@gmail.com \
    --to=alexandre.torgue@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.