All of lore.kernel.org
 help / color / mirror / Atom feed
From: Himanshu Madhani <himanshu.madhani@qlogic.com>
To: target-devel@vger.kernel.org, nab@linux-iscsi.org
Cc: giridhar.malavali@qlogic.com, linux-scsi@vger.kernel.org,
	himanshu.madhani@qlogic.com
Subject: [PATCH 1/4] qla2xxx: Fix stale pointer access.
Date: Thu, 4 Feb 2016 11:45:16 -0500	[thread overview]
Message-ID: <1454604319-27947-2-git-send-email-himanshu.madhani@qlogic.com> (raw)
In-Reply-To: <1454604319-27947-1-git-send-email-himanshu.madhani@qlogic.com>

From: Quinn Tran <quinn.tran@qlogic.com>

[ Upstream Commit 84e32a06f4f8756ce9ec3c8dc7e97896575f0771 ]

Commit 84e32a0 ("qla2xxx: Use pci_enable_msix_range() instead of
pci_enable_msix()") introduced a regression when target mode is enabled.
In qla24xx_enable_msix(), ha->max_rsp_queues was incorrectly set
to a value higher than the number of response queues allocated causing
an invalid dereference. Specifically here in qla2x00_init_rings():
    *rsp->in_ptr = 0;

Add additional check to make sure the pointer is valid. following
call stack will be seen

---- 8< ----
RIP: 0010:[<ffffffffa02ccadc>]  [<ffffffffa02ccadc>] qla2x00_init_rings+0xdc/0x320 [qla2xxx]
RSP: 0018:ffff880429447dd8  EFLAGS: 00010082
....
Call Trace:
[<ffffffffa02ceb40>] qla2x00_abort_isp+0x170/0x6b0 [qla2xxx]
[<ffffffffa02c6f77>] qla2x00_do_dpc+0x357/0x7f0 [qla2xxx]
[<ffffffffa02c6c20>] ? qla2x00_relogin+0x260/0x260 [qla2xxx]
[<ffffffff8107d2c9>] kthread+0xc9/0xe0
[<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90
[<ffffffff8172cc6f>] ret_from_fork+0x3f/0x70
[<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90
---- 8< ----

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
---
 drivers/scsi/qla2xxx/qla_init.c |   10 +++++-----
 drivers/scsi/qla2xxx/qla_isr.c  |    4 ++--
 drivers/scsi/qla2xxx/qla_mid.c  |    4 ++--
 drivers/scsi/qla2xxx/qla_os.c   |    6 ++++++
 drivers/scsi/qla2xxx/qla_tmpl.c |   16 ++++++++++++++++
 5 files changed, 31 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 52a8765..692a757 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2204,7 +2204,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 	/* Clear outstanding commands array. */
 	for (que = 0; que < ha->max_req_queues; que++) {
 		req = ha->req_q_map[que];
-		if (!req)
+		if (!req || !test_bit(que, ha->req_qid_map))
 			continue;
 		req->out_ptr = (void *)(req->ring + req->length);
 		*req->out_ptr = 0;
@@ -2221,7 +2221,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 
 	for (que = 0; que < ha->max_rsp_queues; que++) {
 		rsp = ha->rsp_q_map[que];
-		if (!rsp)
+		if (!rsp || !test_bit(que, ha->rsp_qid_map))
 			continue;
 		rsp->in_ptr = (void *)(rsp->ring + rsp->length);
 		*rsp->in_ptr = 0;
@@ -4981,7 +4981,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 
 	for (i = 1; i < ha->max_rsp_queues; i++) {
 		rsp = ha->rsp_q_map[i];
-		if (rsp) {
+		if (rsp && test_bit(i, ha->rsp_qid_map)) {
 			rsp->options &= ~BIT_0;
 			ret = qla25xx_init_rsp_que(base_vha, rsp);
 			if (ret != QLA_SUCCESS)
@@ -4996,8 +4996,8 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 	}
 	for (i = 1; i < ha->max_req_queues; i++) {
 		req = ha->req_q_map[i];
-		if (req) {
-		/* Clear outstanding commands array. */
+		if (req && test_bit(i, ha->req_qid_map)) {
+			/* Clear outstanding commands array. */
 			req->options &= ~BIT_0;
 			ret = qla25xx_init_req_que(base_vha, req);
 			if (ret != QLA_SUCCESS)
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d4d65eb..4af9547 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3063,9 +3063,9 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 		    "MSI-X: Failed to enable support "
 		    "-- %d/%d\n Retry with %d vectors.\n",
 		    ha->msix_count, ret, ret);
+		ha->msix_count = ret;
+		ha->max_rsp_queues = ha->msix_count - 1;
 	}
-	ha->msix_count = ret;
-	ha->max_rsp_queues = ha->msix_count - 1;
 	ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
 				ha->msix_count, GFP_KERNEL);
 	if (!ha->msix_entries) {
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index c5dd594..cf7ba52 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -600,7 +600,7 @@ qla25xx_delete_queues(struct scsi_qla_host *vha)
 	/* Delete request queues */
 	for (cnt = 1; cnt < ha->max_req_queues; cnt++) {
 		req = ha->req_q_map[cnt];
-		if (req) {
+		if (req && test_bit(cnt, ha->req_qid_map)) {
 			ret = qla25xx_delete_req_que(vha, req);
 			if (ret != QLA_SUCCESS) {
 				ql_log(ql_log_warn, vha, 0x00ea,
@@ -614,7 +614,7 @@ qla25xx_delete_queues(struct scsi_qla_host *vha)
 	/* Delete response queues */
 	for (cnt = 1; cnt < ha->max_rsp_queues; cnt++) {
 		rsp = ha->rsp_q_map[cnt];
-		if (rsp) {
+		if (rsp && test_bit(cnt, ha->rsp_qid_map)) {
 			ret = qla25xx_delete_rsp_que(vha, rsp);
 			if (ret != QLA_SUCCESS) {
 				ql_log(ql_log_warn, vha, 0x00eb,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index f1788db..f6c7ce3 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -409,6 +409,9 @@ static void qla2x00_free_queues(struct qla_hw_data *ha)
 	int cnt;
 
 	for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
+		if (!test_bit(cnt, ha->req_qid_map))
+			continue;
+
 		req = ha->req_q_map[cnt];
 		qla2x00_free_req_que(ha, req);
 	}
@@ -416,6 +419,9 @@ static void qla2x00_free_queues(struct qla_hw_data *ha)
 	ha->req_q_map = NULL;
 
 	for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
+		if (!test_bit(cnt, ha->rsp_qid_map))
+			continue;
+
 		rsp = ha->rsp_q_map[cnt];
 		qla2x00_free_rsp_que(ha, rsp);
 	}
diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c
index ddbe2e7..c3e6225 100644
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -395,6 +395,10 @@ qla27xx_fwdt_entry_t263(struct scsi_qla_host *vha,
 	if (ent->t263.queue_type == T263_QUEUE_TYPE_REQ) {
 		for (i = 0; i < vha->hw->max_req_queues; i++) {
 			struct req_que *req = vha->hw->req_q_map[i];
+
+			if (!test_bit(i, vha->hw->req_qid_map))
+				continue;
+
 			if (req || !buf) {
 				length = req ?
 				    req->length : REQUEST_ENTRY_CNT_24XX;
@@ -408,6 +412,10 @@ qla27xx_fwdt_entry_t263(struct scsi_qla_host *vha,
 	} else if (ent->t263.queue_type == T263_QUEUE_TYPE_RSP) {
 		for (i = 0; i < vha->hw->max_rsp_queues; i++) {
 			struct rsp_que *rsp = vha->hw->rsp_q_map[i];
+
+			if (!test_bit(i, vha->hw->rsp_qid_map))
+				continue;
+
 			if (rsp || !buf) {
 				length = rsp ?
 				    rsp->length : RESPONSE_ENTRY_CNT_MQ;
@@ -634,6 +642,10 @@ qla27xx_fwdt_entry_t274(struct scsi_qla_host *vha,
 	if (ent->t274.queue_type == T274_QUEUE_TYPE_REQ_SHAD) {
 		for (i = 0; i < vha->hw->max_req_queues; i++) {
 			struct req_que *req = vha->hw->req_q_map[i];
+
+			if (!test_bit(i, vha->hw->req_qid_map))
+				continue;
+
 			if (req || !buf) {
 				qla27xx_insert16(i, buf, len);
 				qla27xx_insert16(1, buf, len);
@@ -645,6 +657,10 @@ qla27xx_fwdt_entry_t274(struct scsi_qla_host *vha,
 	} else if (ent->t274.queue_type == T274_QUEUE_TYPE_RSP_SHAD) {
 		for (i = 0; i < vha->hw->max_rsp_queues; i++) {
 			struct rsp_que *rsp = vha->hw->rsp_q_map[i];
+
+			if (!test_bit(i, vha->hw->rsp_qid_map))
+				continue;
+
 			if (rsp || !buf) {
 				qla27xx_insert16(i, buf, len);
 				qla27xx_insert16(1, buf, len);
-- 
1.7.7

  reply	other threads:[~2016-02-04 16:45 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-04 16:45 [PATCH 0/4] qla2xxx: Patches for target-pending branch Himanshu Madhani
2016-02-04 16:45 ` Himanshu Madhani [this message]
2016-02-04 16:45 ` [PATCH 2/4] qla2xxx: Use ATIO type to send correct tmr response Himanshu Madhani
2016-02-04 16:45 ` [PATCH 3/4] qla2xxx: Add DebugFS node for target sess list Himanshu Madhani
2016-02-04 18:16   ` Bart Van Assche
2016-02-05 17:26     ` Himanshu Madhani
2016-02-05 20:00       ` Bart Van Assche
2016-02-05 20:17         ` Giridhar Malavali
2016-02-07  4:44     ` Nicholas A. Bellinger
2016-02-07  4:40   ` Nicholas A. Bellinger
2016-02-07  5:00     ` Nicholas A. Bellinger
2016-02-09 18:01       ` Himanshu Madhani
2016-02-08 17:43     ` Himanshu Madhani
2016-02-09  5:49       ` Nicholas A. Bellinger
2016-02-09 21:30         ` Himanshu Madhani
2016-02-04 16:45 ` [PATCH 4/4] qla2xxx: Add DebugFS node to show irq vector's cpuid Himanshu Madhani
2016-02-04 18:20   ` Bart Van Assche
2016-02-05 18:49     ` Quinn Tran
2016-02-05 19:42       ` Bart Van Assche
2016-02-05 21:52         ` Quinn Tran
2016-02-07  4:31 ` [PATCH 0/4] qla2xxx: Patches for target-pending branch Nicholas A. Bellinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454604319-27947-2-git-send-email-himanshu.madhani@qlogic.com \
    --to=himanshu.madhani@qlogic.com \
    --cc=giridhar.malavali@qlogic.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=nab@linux-iscsi.org \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.