From: Keerthy <j-keerthy@ti.com>
To: <tony@atomide.com>, <edubezval@gmail.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-omap@vger.kernel.org>, <linux@arm.linux.org.uk>,
<galak@codeaurora.org>, <ijc+devicetree@hellion.org.uk>,
<mark.rutland@arm.com>, Keerthy <j-keerthy@ti.com>
Subject: [PATCH 1/3] arm: dts: DRA7: Add DSPEVE thermal data
Date: Mon, 8 Feb 2016 14:46:28 +0530 [thread overview]
Message-ID: <1454922990-7501-2-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1454922990-7501-1-git-send-email-j-keerthy@ti.com>
This patch changes a dtsi file to contain the thermal data
for DSPEVE domain. This data will enable a thermal shutdown at 125C.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 0000000..1c39a84
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 3>;
+
+ trips {
+ dspeve_crit: dspeve_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: tony@atomide.com, edubezval@gmail.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-omap@vger.kernel.org, linux@arm.linux.org.uk,
galak@codeaurora.org, ijc+devicetree@hellion.org.uk,
mark.rutland@arm.com, Keerthy <j-keerthy@ti.com>
Subject: [PATCH 1/3] arm: dts: DRA7: Add DSPEVE thermal data
Date: Mon, 8 Feb 2016 14:46:28 +0530 [thread overview]
Message-ID: <1454922990-7501-2-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1454922990-7501-1-git-send-email-j-keerthy@ti.com>
This patch changes a dtsi file to contain the thermal data
for DSPEVE domain. This data will enable a thermal shutdown at 125C.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 0000000..1c39a84
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 3>;
+
+ trips {
+ dspeve_crit: dspeve_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: j-keerthy@ti.com (Keerthy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] arm: dts: DRA7: Add DSPEVE thermal data
Date: Mon, 8 Feb 2016 14:46:28 +0530 [thread overview]
Message-ID: <1454922990-7501-2-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1454922990-7501-1-git-send-email-j-keerthy@ti.com>
This patch changes a dtsi file to contain the thermal data
for DSPEVE domain. This data will enable a thermal shutdown at 125C.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 0000000..1c39a84
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 3>;
+
+ trips {
+ dspeve_crit: dspeve_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2016-02-08 9:18 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-08 9:16 [PATCH 0/3] arm: dts: DRA7: Add IVA and DSPEVE thermal domain data Keerthy
2016-02-08 9:16 ` Keerthy
2016-02-08 9:16 ` Keerthy
2016-02-08 9:16 ` Keerthy [this message]
2016-02-08 9:16 ` [PATCH 1/3] arm: dts: DRA7: Add DSPEVE thermal data Keerthy
2016-02-08 9:16 ` Keerthy
2016-02-08 9:16 ` [PATCH 2/3] arm: dts: DRA7: Add IVA " Keerthy
2016-02-08 9:16 ` Keerthy
2016-02-08 9:16 ` Keerthy
2016-02-08 9:16 ` [PATCH 3/3] arm: dts: DRA7: Add missing IVA and DSPEVE thermal domain data Keerthy
2016-02-08 9:16 ` Keerthy
2016-02-08 9:16 ` Keerthy
2016-02-08 19:57 ` [PATCH 0/3] arm: dts: DRA7: Add " Tony Lindgren
2016-02-08 19:57 ` Tony Lindgren
2016-02-08 19:57 ` Tony Lindgren
2016-02-09 3:37 ` Keerthy
2016-02-09 3:37 ` Keerthy
2016-02-09 3:37 ` Keerthy
2016-02-09 15:58 ` Tony Lindgren
2016-02-09 15:58 ` Tony Lindgren
2016-02-09 21:53 ` Eduardo Valentin
2016-02-09 21:53 ` Eduardo Valentin
2016-02-10 3:37 ` Keerthy
2016-02-10 3:37 ` Keerthy
2016-02-10 3:37 ` Keerthy
2016-02-09 21:52 ` Eduardo Valentin
2016-02-09 21:52 ` Eduardo Valentin
2016-02-12 22:21 ` Tony Lindgren
2016-02-12 22:21 ` Tony Lindgren
2016-02-12 22:21 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454922990-7501-2-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.