[PATCH V5 0/8] ethtool per queue parameters support

[PATCH V5 0/8] ethtool per queue parameters support

[Kan Liang]

Modern network interface controllers usually support multiple receive
and transmit queues. Each queue may have its own parameters. For
example, Intel XL710/X710 hardware supports per queue interrupt
moderation. However, current ethtool does not support per queue
parameters option. User has to set parameters for the whole NIC.
This series extends ethtool to support per queue parameters option.

Since the support of per queue parameters vary with different cards,
it is impossible to address all cards in one patch. This series only
supports per queue coalesce options on i40e driver. The framework used
in the patch can be easily extended to other cards and parameters.

The lib bitmap needs to be extended to facilitate exchanging queue bitmaps
between user space and kernel space. Two patches from David's latest V6
patch series are also cited in this series. You may refer to
https://lwn.net/Articles/672517/ for more details.

Changes since V4:
 - Modify set/get_per_queue_coalesce function description
 - Change the queue number to be u32
 - Correct an error of calculating coalesce backup buffer address
 - Rename queue_num to n_queues
 - Don't log error message in __i40e_get_coalesce

Changes since V3:
 - Based on David's lib bitmap.
 - ETHTOOL_PERQUEUE should be handled before the containing switch
 - Make the rollback code unconditional
 - some minor changes according to Ben's feedback

Changes since V2:
 - Add queue-specific settings for interrupt moderation in i40e

Changes since V1:
 - Checking the sub-command number to determine whether the command
   requires CAP_NET_ADMIN
 - Refine the struct ethtool_per_queue_op and improve the comments
 - Use bitmap functions to parse queue mask
 - Improve comments
 - Use bitmap functions to parse queue mask
 - Improve comments
 - Add rollback support
 - Correct the way to find the vector for specific queue.

David Decotigny (2):
  lib/bitmap.c: conversion routines to/from u32 array
  test_bitmap: unit tests for lib/bitmap.c

Kan Liang (6):
  net/ethtool: introduce a new ioctl for per queue setting
  net/ethtool: support get coalesce per queue
  net/ethtool: support set coalesce per queue
  i40e: queue-specific settings for interrupt moderation
  i40e/ethtool: support coalesce getting by queue
  i40e/ethtool: support coalesce setting by queue

 drivers/net/ethernet/intel/i40e/i40e.h         |   7 --
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c |  15 ++-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 151 +++++++++++++++++--------
 drivers/net/ethernet/intel/i40e/i40e_main.c    |  12 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    |   9 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.h    |   8 ++
 include/linux/bitmap.h                         |   6 +
 include/linux/ethtool.h                        |  15 ++-
 include/uapi/linux/ethtool.h                   |  17 +++
 lib/Kconfig.debug                              |   8 ++
 lib/Makefile                                   |   1 +
 lib/bitmap.c                                   |  86 ++++++++++++++
 net/core/ethtool.c                             | 121 +++++++++++++++++++-
 tools/testing/selftests/lib/Makefile           |   2 +-
 14 files changed, 385 insertions(+), 73 deletions(-)

-- 
1.8.3.1

[PATCH V6 1/8] lib/bitmap.c: conversion routines to/from u32 array

[Kan Liang]

From: David Decotigny <decot@googlers.com>

Aimed at transferring bitmaps to/from user-space in a 32/64-bit agnostic
way.

Tested:
  unit tests (next patch) on qemu i386, x86_64, ppc, ppc64 BE and LE,
  ARM.

Signed-off-by: David Decotigny <decot@googlers.com>
---
 include/linux/bitmap.h |  6 ++++
 lib/bitmap.c           | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 92 insertions(+)

diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 9653fdb..f7dc158 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -59,6 +59,8 @@
  * bitmap_find_free_region(bitmap, bits, order)	Find and allocate bit region
  * bitmap_release_region(bitmap, pos, order)	Free specified bit region
  * bitmap_allocate_region(bitmap, pos, order)	Allocate specified bit region
+ * bitmap_from_u32array(dst, nbits, buf, nwords) *dst = *buf (nwords 32b words)
+ * bitmap_to_u32array(buf, nwords, src, nbits)	*buf = *dst (nwords 32b words)
  */
 
 /*
@@ -163,6 +165,10 @@ extern void bitmap_fold(unsigned long *dst, const unsigned long *orig,
 extern int bitmap_find_free_region(unsigned long *bitmap, unsigned int bits, int order);
 extern void bitmap_release_region(unsigned long *bitmap, unsigned int pos, int order);
 extern int bitmap_allocate_region(unsigned long *bitmap, unsigned int pos, int order);
+extern void bitmap_from_u32array(unsigned long *bitmap, unsigned int nbits,
+				 const u32 *buf, unsigned int nwords);
+extern void bitmap_to_u32array(u32 *buf, unsigned int nwords,
+			       const unsigned long *bitmap, unsigned int nbits);
 #ifdef __BIG_ENDIAN
 extern void bitmap_copy_le(unsigned long *dst, const unsigned long *src, unsigned int nbits);
 #else
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 8148143..e1cc648 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -12,6 +12,8 @@
 #include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
 
 #include <asm/page.h>
 #include <asm/uaccess.h>
@@ -1060,6 +1062,90 @@ int bitmap_allocate_region(unsigned long *bitmap, unsigned int pos, int order)
 EXPORT_SYMBOL(bitmap_allocate_region);
 
 /**
+ * bitmap_from_u32array - copy the contents of a u32 array of bits to bitmap
+ *	@bitmap: array of unsigned longs, the destination bitmap, non NULL
+ *	@nbits: number of bits in @bitmap
+ *	@buf: array of u32 (in host byte order), the source bitmap, non NULL
+ *	@nwords: number of u32 words in @buf
+ *
+ * copy min(nbits, 32*nwords) bits from @buf to @bitmap, remaining
+ * bits between nword and nbits in @bitmap (if any) are cleared. In
+ * last word of @bitmap, the bits beyond nbits (if any) are kept
+ * unchanged.
+ */
+void bitmap_from_u32array(unsigned long *bitmap, unsigned int nbits,
+			  const u32 *buf, unsigned int nwords)
+{
+	unsigned int k;
+	const u32 *src = buf;
+
+	for (k = 0; k < BITS_TO_LONGS(nbits); ++k) {
+		unsigned long part = 0;
+
+		if (nwords) {
+			part = *src++;
+			nwords--;
+		}
+
+#if BITS_PER_LONG == 64
+		if (nwords) {
+			part |= ((unsigned long) *src++) << 32;
+			nwords--;
+		}
+#endif
+
+		if (k < nbits/BITS_PER_LONG)
+			bitmap[k] = part;
+		else {
+			unsigned long mask = BITMAP_LAST_WORD_MASK(nbits);
+
+			bitmap[k] = (bitmap[k] & ~mask) | (part & mask);
+		}
+	}
+}
+EXPORT_SYMBOL(bitmap_from_u32array);
+
+/**
+ * bitmap_to_u32array - copy the contents of bitmap to a u32 array of bits
+ *	@buf: array of u32 (in host byte order), the dest bitmap, non NULL
+ *	@nwords: number of u32 words in @buf
+ *	@bitmap: array of unsigned longs, the source bitmap, non NULL
+ *	@nbits: number of bits in @bitmap
+ *
+ * copy min(nbits, 32*nwords) bits from @bitmap to @buf. Remaining
+ * bits after nbits in @buf (if any) are cleared.
+ */
+void bitmap_to_u32array(u32 *buf, unsigned int nwords,
+			const unsigned long *bitmap, unsigned int nbits)
+{
+	unsigned int k = 0;
+	u32 *dst = buf;
+
+	while (nwords) {
+		unsigned long part = 0;
+
+		if (k < BITS_TO_LONGS(nbits)) {
+			part = bitmap[k];
+			if (k >= nbits/BITS_PER_LONG)
+				part &= BITMAP_LAST_WORD_MASK(nbits);
+			k++;
+		}
+
+		*dst++ = part & 0xffffffffUL;
+		nwords--;
+
+#if BITS_PER_LONG == 64
+		if (nwords) {
+			part >>= 32;
+			*dst++ = part & 0xffffffffUL;
+			nwords--;
+		}
+#endif
+	}
+}
+EXPORT_SYMBOL(bitmap_to_u32array);
+
+/**
  * bitmap_copy_le - copy a bitmap, putting the bits into little-endian order.
  * @dst:   destination buffer
  * @src:   bitmap to copy
-- 
1.8.3.1

[PATCH V6 2/8] test_bitmap: unit tests for lib/bitmap.c

[Kan Liang]

From: David Decotigny <decot@googlers.com>

This is mainly testing bitmap construction and conversion to/from u32[]
for now.

Tested:
  qemu i386, x86_64, ppc, ppc64 BE and LE, ARM.

Signed-off-by: David Decotigny <decot@googlers.com>
---
 lib/Kconfig.debug                    | 8 ++++++++
 lib/Makefile                         | 1 +
 tools/testing/selftests/lib/Makefile | 2 +-
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ecb9e75..f890ee5 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1738,6 +1738,14 @@ config TEST_KSTRTOX
 config TEST_PRINTF
 	tristate "Test printf() family of functions at runtime"
 
+config TEST_BITMAP
+	tristate "Test bitmap_*() family of functions at runtime"
+	default n
+	help
+	  Enable this option to test the bitmap functions at boot.
+
+	  If unsure, say N.
+
 config TEST_RHASHTABLE
 	tristate "Perform selftest on resizable hash table"
 	default n
diff --git a/lib/Makefile b/lib/Makefile
index a7c26a4..dda4039 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
 obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
 obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
 obj-$(CONFIG_TEST_PRINTF) += test_printf.o
+obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
 
 ifeq ($(CONFIG_DEBUG_KOBJECT),y)
 CFLAGS_kobject.o += -DDEBUG
diff --git a/tools/testing/selftests/lib/Makefile b/tools/testing/selftests/lib/Makefile
index 47147b9..0836006 100644
--- a/tools/testing/selftests/lib/Makefile
+++ b/tools/testing/selftests/lib/Makefile
@@ -3,6 +3,6 @@
 # No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
 all:
 
-TEST_PROGS := printf.sh
+TEST_PROGS := printf.sh bitmap.sh
 
 include ../lib.mk
-- 
1.8.3.1

[PATCH V5 3/8] net/ethtool: introduce a new ioctl for per queue setting

[Kan Liang]

From: Kan Liang <kan.liang@intel.com>

Introduce a new ioctl ETHTOOL_PERQUEUE for per queue parameters setting.
The following patches will enable some SUB_COMMANDs for per queue
setting.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/uapi/linux/ethtool.h | 17 +++++++++++++++++
 net/core/ethtool.c           | 27 +++++++++++++++++++++++++--
 2 files changed, 42 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 190aea0..f15ae02 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1202,6 +1202,21 @@ enum ethtool_sfeatures_retval_bits {
 #define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
 #define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
 
+#define MAX_NUM_QUEUE		4096
+
+/**
+ * struct ethtool_per_queue_op - apply sub command to the queues in mask.
+ * @cmd: ETHTOOL_PERQUEUE
+ * @sub_command: the sub command which apply to each queues
+ * @queue_mask: Bitmap of the queues which sub command apply to
+ * @data: A complete command structure following for each of the queues addressed
+ */
+struct ethtool_per_queue_op {
+	__u32	cmd;
+	__u32	sub_command;
+	__u32	queue_mask[DIV_ROUND_UP(MAX_NUM_QUEUE, 32)];
+	char	data[];
+};
 
 /* CMDs currently supported */
 #define ETHTOOL_GSET		0x00000001 /* Get settings. */
@@ -1285,6 +1300,8 @@ enum ethtool_sfeatures_retval_bits {
 #define ETHTOOL_STUNABLE	0x00000049 /* Set tunable configuration */
 #define ETHTOOL_GPHYSTATS	0x0000004a /* get PHY-specific statistics */
 
+#define ETHTOOL_PERQUEUE	0x0000004b /* Set per queue options */
+
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
 #define SPARC_ETH_SSET		ETHTOOL_SSET
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 453c803..d0f7146 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1823,13 +1823,27 @@ out:
 	return ret;
 }
 
+static int ethtool_set_per_queue(struct net_device *dev, void __user *useraddr)
+{
+	struct ethtool_per_queue_op per_queue_opt;
+
+	if (copy_from_user(&per_queue_opt, useraddr, sizeof(per_queue_opt)))
+		return -EFAULT;
+
+	switch (per_queue_opt.sub_command) {
+
+	default:
+		return -EOPNOTSUPP;
+	};
+}
+
 /* The main entry point in this file.  Called from net/core/dev_ioctl.c */
 
 int dev_ethtool(struct net *net, struct ifreq *ifr)
 {
 	struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name);
 	void __user *useraddr = ifr->ifr_data;
-	u32 ethcmd;
+	u32 ethcmd, sub_cmd;
 	int rc;
 	netdev_features_t old_features;
 
@@ -1839,8 +1853,14 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
 	if (copy_from_user(&ethcmd, useraddr, sizeof(ethcmd)))
 		return -EFAULT;
 
+	if (ethcmd == ETHTOOL_PERQUEUE) {
+		if (copy_from_user(&sub_cmd, useraddr + sizeof(ethcmd), sizeof(sub_cmd)))
+			return -EFAULT;
+	} else {
+		sub_cmd = ethcmd;
+	}
 	/* Allow some commands to be done by anyone */
-	switch (ethcmd) {
+	switch (sub_cmd) {
 	case ETHTOOL_GSET:
 	case ETHTOOL_GDRVINFO:
 	case ETHTOOL_GMSGLVL:
@@ -2070,6 +2090,9 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
 	case ETHTOOL_GPHYSTATS:
 		rc = ethtool_get_phy_stats(dev, useraddr);
 		break;
+	case ETHTOOL_PERQUEUE:
+		rc = ethtool_set_per_queue(dev, useraddr);
+		break;
 	default:
 		rc = -EOPNOTSUPP;
 	}
-- 
1.8.3.1

[PATCH V5 4/8] net/ethtool: support get coalesce per queue

[Kan Liang]

From: Kan Liang <kan.liang@intel.com>

This patch implements sub command ETHTOOL_GCOALESCE for ioctl
ETHTOOL_PERQUEUE. It introduces an interface get_per_queue_coalesce to
get coalesce of each masked queue from device driver. Then the interrupt
coalescing parameters will be copied back to user space one by one.

Signed-off-by: Kan Liang <kan.liang@intel.com>
---
 include/linux/ethtool.h |  8 +++++++-
 net/core/ethtool.c      | 35 ++++++++++++++++++++++++++++++++++-
 2 files changed, 41 insertions(+), 2 deletions(-)

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 653dc9c..de56600 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -201,6 +201,11 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
  * @get_module_eeprom: Get the eeprom information from the plug-in module
  * @get_eee: Get Energy-Efficient (EEE) supported and status.
  * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
+ * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
+ *	It must check that the given queue number is valid. If neither a RX nor
+ *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
+ *	queue has this number, set the inapplicable fields to ~0 and return 0.
+ *	Returns a negative error code or zero.
  *
  * All operations are optional (i.e. the function pointer may be set
  * to %NULL) and callers must take this into account.  Callers must
@@ -279,7 +284,8 @@ struct ethtool_ops {
 			       const struct ethtool_tunable *, void *);
 	int	(*set_tunable)(struct net_device *,
 			       const struct ethtool_tunable *, const void *);
-
+	int	(*get_per_queue_coalesce)(struct net_device *, u32,
+					  struct ethtool_coalesce *);
 
 };
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index d0f7146..c7bc427 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1823,6 +1823,38 @@ out:
 	return ret;
 }
 
+static int ethtool_get_per_queue_coalesce(struct net_device *dev,
+					  void __user *useraddr,
+					  struct ethtool_per_queue_op *per_queue_opt)
+{
+	u32 bit;
+	int ret;
+	DECLARE_BITMAP(queue_mask, MAX_NUM_QUEUE);
+
+	if (!dev->ethtool_ops->get_per_queue_coalesce)
+		return -EOPNOTSUPP;
+
+	useraddr += sizeof(*per_queue_opt);
+
+	bitmap_from_u32array(queue_mask,
+			     MAX_NUM_QUEUE,
+			     per_queue_opt->queue_mask,
+			     DIV_ROUND_UP(MAX_NUM_QUEUE, 32));
+
+	for_each_set_bit(bit, queue_mask, MAX_NUM_QUEUE) {
+		struct ethtool_coalesce coalesce = { .cmd = ETHTOOL_GCOALESCE };
+
+		ret = dev->ethtool_ops->get_per_queue_coalesce(dev, bit, &coalesce);
+		if (ret != 0)
+			return ret;
+		if (copy_to_user(useraddr, &coalesce, sizeof(coalesce)))
+			return -EFAULT;
+		useraddr += sizeof(coalesce);
+	}
+
+	return 0;
+}
+
 static int ethtool_set_per_queue(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_per_queue_op per_queue_opt;
@@ -1831,7 +1863,8 @@ static int ethtool_set_per_queue(struct net_device *dev, void __user *useraddr)
 		return -EFAULT;
 
 	switch (per_queue_opt.sub_command) {
-
+	case ETHTOOL_GCOALESCE:
+		return ethtool_get_per_queue_coalesce(dev, useraddr, &per_queue_opt);
 	default:
 		return -EOPNOTSUPP;
 	};
-- 
1.8.3.1

[PATCH V5 5/8] net/ethtool: support set coalesce per queue

[Kan Liang]

From: Kan Liang <kan.liang@intel.com>

This patch implements sub command ETHTOOL_SCOALESCE for ioctl
ETHTOOL_PERQUEUE. It introduces an interface set_per_queue_coalesce to
set coalesce of each masked queue to device driver. The wanted coalesce
information are stored in "data" for each masked queue, which can copy
from userspace.
If it fails to set coalesce to device driver, the value which already
set to specific queue will be tried to rollback.

Signed-off-by: Kan Liang <kan.liang@intel.com>
---
 include/linux/ethtool.h |  7 ++++++
 net/core/ethtool.c      | 61 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 68 insertions(+)

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index de56600..472d7d7 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -206,6 +206,11 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
  *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
  *	queue has this number, set the inapplicable fields to ~0 and return 0.
  *	Returns a negative error code or zero.
+ * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
+ *	It must check that the given queue number is valid. If neither a RX nor
+ *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
+ *	queue has this number, ignore the inapplicable fields.
+ *	Returns a negative error code or zero.
  *
  * All operations are optional (i.e. the function pointer may be set
  * to %NULL) and callers must take this into account.  Callers must
@@ -286,6 +291,8 @@ struct ethtool_ops {
 			       const struct ethtool_tunable *, const void *);
 	int	(*get_per_queue_coalesce)(struct net_device *, u32,
 					  struct ethtool_coalesce *);
+	int	(*set_per_queue_coalesce)(struct net_device *, u32,
+					  struct ethtool_coalesce *);
 
 };
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index c7bc427..564d7c8 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1855,6 +1855,65 @@ static int ethtool_get_per_queue_coalesce(struct net_device *dev,
 	return 0;
 }
 
+static int ethtool_set_per_queue_coalesce(struct net_device *dev,
+					  void __user *useraddr,
+					  struct ethtool_per_queue_op *per_queue_opt)
+{
+	u32 bit;
+	int i, ret = 0;
+	int n_queue;
+	struct ethtool_coalesce *backup = NULL, *tmp = NULL;
+	DECLARE_BITMAP(queue_mask, MAX_NUM_QUEUE);
+
+	if ((!dev->ethtool_ops->set_per_queue_coalesce) ||
+	    (!dev->ethtool_ops->get_per_queue_coalesce))
+		return -EOPNOTSUPP;
+
+	useraddr += sizeof(*per_queue_opt);
+
+	bitmap_from_u32array(queue_mask,
+			     MAX_NUM_QUEUE,
+			     per_queue_opt->queue_mask,
+			     DIV_ROUND_UP(MAX_NUM_QUEUE, 32));
+	n_queue = bitmap_weight(queue_mask, MAX_NUM_QUEUE);
+	tmp = backup = kmalloc_array(n_queue, sizeof(*backup), GFP_KERNEL);
+	if (!backup)
+		return -ENOMEM;
+
+	for_each_set_bit(bit, queue_mask, MAX_NUM_QUEUE) {
+		struct ethtool_coalesce coalesce;
+
+		ret = dev->ethtool_ops->get_per_queue_coalesce(dev, bit, tmp);
+		if (ret != 0)
+			goto roll_back;
+
+		tmp++;
+
+		if (copy_from_user(&coalesce, useraddr, sizeof(coalesce))) {
+			ret = -EFAULT;
+			goto roll_back;
+		}
+
+		ret = dev->ethtool_ops->set_per_queue_coalesce(dev, bit, &coalesce);
+		if (ret != 0)
+			goto roll_back;
+
+		useraddr += sizeof(coalesce);
+	}
+
+roll_back:
+	if (ret != 0) {
+		tmp = backup;
+		for_each_set_bit(i, queue_mask, bit) {
+			dev->ethtool_ops->set_per_queue_coalesce(dev, i, tmp);
+			tmp++;
+		}
+	}
+	kfree(backup);
+
+	return ret;
+}
+
 static int ethtool_set_per_queue(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_per_queue_op per_queue_opt;
@@ -1865,6 +1924,8 @@ static int ethtool_set_per_queue(struct net_device *dev, void __user *useraddr)
 	switch (per_queue_opt.sub_command) {
 	case ETHTOOL_GCOALESCE:
 		return ethtool_get_per_queue_coalesce(dev, useraddr, &per_queue_opt);
+	case ETHTOOL_SCOALESCE:
+		return ethtool_set_per_queue_coalesce(dev, useraddr, &per_queue_opt);
 	default:
 		return -EOPNOTSUPP;
 	};
-- 
1.8.3.1

[PATCH V5 6/8] i40e: queue-specific settings for interrupt moderation

[Kan Liang]

From: Kan Liang <kan.liang@intel.com>

For i40e driver, each vector has its own ITR register. However, there
are no concept of queue-specific settings in the driver proper. Only
global variable is used to store ITR values. That will cause problems
especially when resetting the vector. The specific ITR values could be
lost.
This patch move rx_itr_setting and tx_itr_setting to i40e_ring to store
specific ITR register for each queue.
i40e_get_coalesce and i40e_set_coalesce are also modified accordingly to
support queue-specific settings. To make it compatible with old ethtool,
if user doesn't specify the queue number, i40e_get_coalesce will return
queue 0's value. While i40e_set_coalesce will apply value to all queues.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |   7 --
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c |  15 ++-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 139 ++++++++++++++++---------
 drivers/net/ethernet/intel/i40e/i40e_main.c    |  12 +--
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    |   9 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.h    |   8 ++
 6 files changed, 120 insertions(+), 70 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 53ed3bd..1ed3d22 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -502,13 +502,6 @@ struct i40e_vsi {
 	struct i40e_ring **tx_rings;
 
 	u16 work_limit;
-	/* high bit set means dynamic, use accessor routines to read/write.
-	 * hardware only supports 2us resolution for the ITR registers.
-	 * these values always store the USER setting, and must be converted
-	 * before programming to a register.
-	 */
-	u16 rx_itr_setting;
-	u16 tx_itr_setting;
 	u16 int_rate_limit;  /* value in usecs */
 
 	u16 rss_table_size; /* HW RSS table size */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 10744a6..40d49f4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -533,6 +533,10 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid)
 			 "    rx_rings[%i]: vsi = %p, q_vector = %p\n",
 			 i, rx_ring->vsi,
 			 rx_ring->q_vector);
+		dev_info(&pf->pdev->dev,
+			 "    rx_rings[%i]: rx_itr_setting = %d (%s)\n",
+			 i, rx_ring->rx_itr_setting,
+			 ITR_IS_DYNAMIC(rx_ring->rx_itr_setting) ? "dynamic" : "fixed");
 	}
 	for (i = 0; i < vsi->num_queue_pairs; i++) {
 		struct i40e_ring *tx_ring = ACCESS_ONCE(vsi->tx_rings[i]);
@@ -583,14 +587,15 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid)
 		dev_info(&pf->pdev->dev,
 			 "    tx_rings[%i]: DCB tc = %d\n",
 			 i, tx_ring->dcb_tc);
+		dev_info(&pf->pdev->dev,
+			 "    tx_rings[%i]: tx_itr_setting = %d (%s)\n",
+			 i, tx_ring->tx_itr_setting,
+			 ITR_IS_DYNAMIC(tx_ring->tx_itr_setting) ? "dynamic" : "fixed");
 	}
 	rcu_read_unlock();
 	dev_info(&pf->pdev->dev,
-		 "    work_limit = %d, rx_itr_setting = %d (%s), tx_itr_setting = %d (%s)\n",
-		 vsi->work_limit, vsi->rx_itr_setting,
-		 ITR_IS_DYNAMIC(vsi->rx_itr_setting) ? "dynamic" : "fixed",
-		 vsi->tx_itr_setting,
-		 ITR_IS_DYNAMIC(vsi->tx_itr_setting) ? "dynamic" : "fixed");
+		 "    work_limit = %d\n",
+		 vsi->work_limit);
 	dev_info(&pf->pdev->dev,
 		 "    max_frame = %d, rx_hdr_len = %d, rx_buf_len = %d dtype = %d\n",
 		 vsi->max_frame, vsi->rx_hdr_len, vsi->rx_buf_len, vsi->dtype);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 4549591..4193ab9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1849,8 +1849,9 @@ static int i40e_set_phys_id(struct net_device *netdev,
  * 125us (8000 interrupts per second) == ITR(62)
  */
 
-static int i40e_get_coalesce(struct net_device *netdev,
-			     struct ethtool_coalesce *ec)
+static int __i40e_get_coalesce(struct net_device *netdev,
+			       struct ethtool_coalesce *ec,
+			       int queue)
 {
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_vsi *vsi = np->vsi;
@@ -1858,14 +1859,24 @@ static int i40e_get_coalesce(struct net_device *netdev,
 	ec->tx_max_coalesced_frames_irq = vsi->work_limit;
 	ec->rx_max_coalesced_frames_irq = vsi->work_limit;
 
-	if (ITR_IS_DYNAMIC(vsi->rx_itr_setting))
+	/* rx and tx usecs has per queue value. If user doesn't specify the queue,
+	 * return queue 0's value to represent.
+	 */
+	if (queue < 0) {
+		queue = 0;
+	} else if (queue >= vsi->num_queue_pairs) {
+		return -EINVAL;
+	}
+
+	if (ITR_IS_DYNAMIC(vsi->rx_rings[queue]->rx_itr_setting))
 		ec->use_adaptive_rx_coalesce = 1;
 
-	if (ITR_IS_DYNAMIC(vsi->tx_itr_setting))
+	if (ITR_IS_DYNAMIC(vsi->tx_rings[queue]->tx_itr_setting))
 		ec->use_adaptive_tx_coalesce = 1;
 
-	ec->rx_coalesce_usecs = vsi->rx_itr_setting & ~I40E_ITR_DYNAMIC;
-	ec->tx_coalesce_usecs = vsi->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+	ec->rx_coalesce_usecs = vsi->rx_rings[queue]->rx_itr_setting & ~I40E_ITR_DYNAMIC;
+	ec->tx_coalesce_usecs = vsi->tx_rings[queue]->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+
 	/* we use the _usecs_high to store/set the interrupt rate limit
 	 * that the hardware supports, that almost but not quite
 	 * fits the original intent of the ethtool variable,
@@ -1878,15 +1889,57 @@ static int i40e_get_coalesce(struct net_device *netdev,
 	return 0;
 }
 
-static int i40e_set_coalesce(struct net_device *netdev,
+static int i40e_get_coalesce(struct net_device *netdev,
 			     struct ethtool_coalesce *ec)
 {
-	struct i40e_netdev_priv *np = netdev_priv(netdev);
+	return __i40e_get_coalesce(netdev, ec, -1);
+}
+
+static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
+				   struct ethtool_coalesce *ec,
+				   int queue)
+{
+	struct i40e_pf *pf = vsi->back;
+	struct i40e_hw *hw = &pf->hw;
 	struct i40e_q_vector *q_vector;
+	u16 vector, intrl;
+
+	intrl = INTRL_USEC_TO_REG(vsi->int_rate_limit);
+
+	vsi->rx_rings[queue]->rx_itr_setting = ec->rx_coalesce_usecs;
+	vsi->tx_rings[queue]->tx_itr_setting = ec->tx_coalesce_usecs;
+
+	if (ec->use_adaptive_rx_coalesce)
+		vsi->rx_rings[queue]->rx_itr_setting |= I40E_ITR_DYNAMIC;
+	else
+		vsi->rx_rings[queue]->rx_itr_setting &= ~I40E_ITR_DYNAMIC;
+
+	if (ec->use_adaptive_tx_coalesce)
+		vsi->tx_rings[queue]->tx_itr_setting |= I40E_ITR_DYNAMIC;
+	else
+		vsi->tx_rings[queue]->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
+
+	q_vector = vsi->rx_rings[queue]->q_vector;
+	q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[queue]->rx_itr_setting);
+	vector = vsi->base_vector + q_vector->v_idx;
+	wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1), q_vector->rx.itr);
+
+	q_vector = vsi->tx_rings[queue]->q_vector;
+	q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[queue]->tx_itr_setting);
+	vector = vsi->base_vector + q_vector->v_idx;
+	wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1), q_vector->tx.itr);
+
+	wr32(hw, I40E_PFINT_RATEN(vector - 1), intrl);
+	i40e_flush(hw);
+}
+
+static int __i40e_set_coalesce(struct net_device *netdev,
+			       struct ethtool_coalesce *ec,
+			       int queue)
+{
+	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_vsi *vsi = np->vsi;
 	struct i40e_pf *pf = vsi->back;
-	struct i40e_hw *hw = &pf->hw;
-	u16 vector;
 	int i;
 
 	if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
@@ -1903,59 +1956,49 @@ static int i40e_set_coalesce(struct net_device *netdev,
 		return -EINVAL;
 	}
 
-	vector = vsi->base_vector;
-	if ((ec->rx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
-	    (ec->rx_coalesce_usecs <= (I40E_MAX_ITR << 1))) {
-		vsi->rx_itr_setting = ec->rx_coalesce_usecs;
-	} else if (ec->rx_coalesce_usecs == 0) {
-		vsi->rx_itr_setting = ec->rx_coalesce_usecs;
+	if (ec->rx_coalesce_usecs == 0) {
 		if (ec->use_adaptive_rx_coalesce)
 			netif_info(pf, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n");
-	} else {
-		netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
-		return -EINVAL;
+	} else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+		   (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+			netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
+			return -EINVAL;
 	}
 
 	vsi->int_rate_limit = ec->rx_coalesce_usecs_high;
 
-	if ((ec->tx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
-	    (ec->tx_coalesce_usecs <= (I40E_MAX_ITR << 1))) {
-		vsi->tx_itr_setting = ec->tx_coalesce_usecs;
-	} else if (ec->tx_coalesce_usecs == 0) {
-		vsi->tx_itr_setting = ec->tx_coalesce_usecs;
+	if (ec->tx_coalesce_usecs == 0) {
 		if (ec->use_adaptive_tx_coalesce)
 			netif_info(pf, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n");
-	} else {
-		netif_info(pf, drv, netdev,
-			   "Invalid value, tx-usecs range is 0-8160\n");
-		return -EINVAL;
+	} else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+		   (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+			netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
+			return -EINVAL;
 	}
 
-	if (ec->use_adaptive_rx_coalesce)
-		vsi->rx_itr_setting |= I40E_ITR_DYNAMIC;
-	else
-		vsi->rx_itr_setting &= ~I40E_ITR_DYNAMIC;
-
-	if (ec->use_adaptive_tx_coalesce)
-		vsi->tx_itr_setting |= I40E_ITR_DYNAMIC;
-	else
-		vsi->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
-
-	for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
-		u16 intrl = INTRL_USEC_TO_REG(vsi->int_rate_limit);
-
-		q_vector = vsi->q_vectors[i];
-		q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
-		wr32(hw, I40E_PFINT_ITRN(0, vector - 1), q_vector->rx.itr);
-		q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
-		wr32(hw, I40E_PFINT_ITRN(1, vector - 1), q_vector->tx.itr);
-		wr32(hw, I40E_PFINT_RATEN(vector - 1), intrl);
-		i40e_flush(hw);
+	/* rx and tx usecs has per queue value. If user doesn't specify the queue,
+	 * apply to all queues.
+	 */
+	if (queue < 0) {
+		for (i = 0; i < vsi->num_queue_pairs; i++)
+			i40e_set_itr_per_queue(vsi, ec, i);
+	} else if (queue < vsi->num_queue_pairs) {
+		i40e_set_itr_per_queue(vsi, ec, queue);
+	} else {
+		netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
+			   vsi->num_queue_pairs - 1);
+		return -EINVAL;
 	}
 
 	return 0;
 }
 
+static int i40e_set_coalesce(struct net_device *netdev,
+			     struct ethtool_coalesce *ec)
+{
+	return __i40e_set_coalesce(netdev, ec, -1);
+}
+
 /**
  * i40e_get_rss_hash_opts - Get RSS hash Input Set for each flow type
  * @pf: pointer to the physical function struct
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 320b049..5532466 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3110,11 +3110,11 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
 		struct i40e_q_vector *q_vector = vsi->q_vectors[i];
 
 		q_vector->itr_countdown = ITR_COUNTDOWN_START;
-		q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
+		q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[i]->rx_itr_setting);
 		q_vector->rx.latency_range = I40E_LOW_LATENCY;
 		wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1),
 		     q_vector->rx.itr);
-		q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
+		q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[i]->tx_itr_setting);
 		q_vector->tx.latency_range = I40E_LOW_LATENCY;
 		wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1),
 		     q_vector->tx.itr);
@@ -3206,10 +3206,10 @@ static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
 
 	/* set the ITR configuration */
 	q_vector->itr_countdown = ITR_COUNTDOWN_START;
-	q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
+	q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[0]->rx_itr_setting);
 	q_vector->rx.latency_range = I40E_LOW_LATENCY;
 	wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.itr);
-	q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
+	q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[0]->tx_itr_setting);
 	q_vector->tx.latency_range = I40E_LOW_LATENCY;
 	wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.itr);
 
@@ -7293,8 +7293,6 @@ static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
 	set_bit(__I40E_DOWN, &vsi->state);
 	vsi->flags = 0;
 	vsi->idx = vsi_idx;
-	vsi->rx_itr_setting = pf->rx_itr_default;
-	vsi->tx_itr_setting = pf->tx_itr_default;
 	vsi->int_rate_limit = 0;
 	vsi->rss_table_size = (vsi->type == I40E_VSI_MAIN) ?
 				pf->rss_table_size : 64;
@@ -7463,6 +7461,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi)
 			tx_ring->flags = I40E_TXR_FLAGS_WB_ON_ITR;
 		if (vsi->back->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE)
 			tx_ring->flags |= I40E_TXR_FLAGS_OUTER_UDP_CSUM;
+		tx_ring->tx_itr_setting = pf->tx_itr_default;
 		vsi->tx_rings[i] = tx_ring;
 
 		rx_ring = &tx_ring[1];
@@ -7479,6 +7478,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi)
 			set_ring_16byte_desc_enabled(rx_ring);
 		else
 			clear_ring_16byte_desc_enabled(rx_ring);
+		rx_ring->rx_itr_setting = pf->rx_itr_default;
 		vsi->rx_rings[i] = rx_ring;
 	}
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 47bd8b3..9b06b9e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1814,6 +1814,7 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	bool rx = false, tx = false;
 	u32 rxval, txval;
 	int vector;
+	int idx = q_vector->v_idx;
 
 	vector = (q_vector->v_idx + vsi->base_vector);
 
@@ -1823,17 +1824,17 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
 
 	if (q_vector->itr_countdown > 0 ||
-	    (!ITR_IS_DYNAMIC(vsi->rx_itr_setting) &&
-	     !ITR_IS_DYNAMIC(vsi->tx_itr_setting))) {
+	    (!ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting) &&
+	     !ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting))) {
 		goto enable_int;
 	}
 
-	if (ITR_IS_DYNAMIC(vsi->rx_itr_setting)) {
+	if (ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting)) {
 		rx = i40e_set_new_dynamic_itr(&q_vector->rx);
 		rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr);
 	}
 
-	if (ITR_IS_DYNAMIC(vsi->tx_itr_setting)) {
+	if (ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting)) {
 		tx = i40e_set_new_dynamic_itr(&q_vector->tx);
 		txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr);
 	}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index 3f081e2..ea1f479 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -246,6 +246,14 @@ struct i40e_ring {
 	u8 dcb_tc;			/* Traffic class of ring */
 	u8 __iomem *tail;
 
+	/* high bit set means dynamic, use accessor routines to read/write.
+	 * hardware only supports 2us resolution for the ITR registers.
+	 * these values always store the USER setting, and must be converted
+	 * before programming to a register.
+	 */
+	u16 rx_itr_setting;
+	u16 tx_itr_setting;
+
 	u16 count;			/* Number of descriptors */
 	u16 reg_idx;			/* HW register index of the ring */
 	u16 rx_hdr_len;
-- 
1.8.3.1

[PATCH V5 7/8] i40e/ethtool: support coalesce getting by queue

[Kan Liang]

From: Kan Liang <kan.liang@intel.com>

This patch implements get_per_queue_coalesce for i40e driver.

Signed-off-by: Kan Liang <kan.liang@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 4193ab9..f9f27bc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1895,6 +1895,12 @@ static int i40e_get_coalesce(struct net_device *netdev,
 	return __i40e_get_coalesce(netdev, ec, -1);
 }
 
+static int i40e_get_per_queue_coalesce(struct net_device *netdev, u32 queue,
+				       struct ethtool_coalesce *ec)
+{
+	return __i40e_get_coalesce(netdev, ec, queue);
+}
+
 static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
 				   struct ethtool_coalesce *ec,
 				   int queue)
@@ -2871,6 +2877,7 @@ static const struct ethtool_ops i40e_ethtool_ops = {
 	.get_ts_info		= i40e_get_ts_info,
 	.get_priv_flags		= i40e_get_priv_flags,
 	.set_priv_flags		= i40e_set_priv_flags,
+	.get_per_queue_coalesce	= i40e_get_per_queue_coalesce,
 };
 
 void i40e_set_ethtool_ops(struct net_device *netdev)
-- 
1.8.3.1

[PATCH V5 8/8] i40e/ethtool: support coalesce setting by queue

[Kan Liang]

From: Kan Liang <kan.liang@intel.com>

This patch implements set_per_queue_coalesce for i40e driver.

Signed-off-by: Kan Liang <kan.liang@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index f9f27bc..9f287f0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -2005,6 +2005,12 @@ static int i40e_set_coalesce(struct net_device *netdev,
 	return __i40e_set_coalesce(netdev, ec, -1);
 }
 
+static int i40e_set_per_queue_coalesce(struct net_device *netdev, u32 queue,
+				       struct ethtool_coalesce *ec)
+{
+	return __i40e_set_coalesce(netdev, ec, queue);
+}
+
 /**
  * i40e_get_rss_hash_opts - Get RSS hash Input Set for each flow type
  * @pf: pointer to the physical function struct
@@ -2878,6 +2884,7 @@ static const struct ethtool_ops i40e_ethtool_ops = {
 	.get_priv_flags		= i40e_get_priv_flags,
 	.set_priv_flags		= i40e_set_priv_flags,
 	.get_per_queue_coalesce	= i40e_get_per_queue_coalesce,
+	.set_per_queue_coalesce	= i40e_set_per_queue_coalesce,
 };
 
 void i40e_set_ethtool_ops(struct net_device *netdev)
-- 
1.8.3.1

Re: [PATCH V5 4/8] net/ethtool: support get coalesce per queue

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 610 bytes --]

On Tue, 2016-02-16 at 07:32 -0500, Kan Liang wrote:
> From: Kan Liang <kan.liang@intel.com>
> 
> This patch implements sub command ETHTOOL_GCOALESCE for ioctl
> ETHTOOL_PERQUEUE. It introduces an interface get_per_queue_coalesce to
> get coalesce of each masked queue from device driver. Then the interrupt
> coalescing parameters will be copied back to user space one by one.
> 
> Signed-off-by: Kan Liang <kan.liang@intel.com>
[...]

Reviewed-by: Ben Hutchings <ben@decadent.org.uk>

-- 
Ben Hutchings
Lowery's Law:
             If it jams, force it. If it breaks, it needed replacing anyway.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 811 bytes --]

Re: [PATCH V5 5/8] net/ethtool: support set coalesce per queue

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 756 bytes --]

On Tue, 2016-02-16 at 07:32 -0500, Kan Liang wrote:
> From: Kan Liang <kan.liang@intel.com>
> 
> This patch implements sub command ETHTOOL_SCOALESCE for ioctl
> ETHTOOL_PERQUEUE. It introduces an interface set_per_queue_coalesce to
> set coalesce of each masked queue to device driver. The wanted coalesce
> information are stored in "data" for each masked queue, which can copy
> from userspace.
> If it fails to set coalesce to device driver, the value which already
> set to specific queue will be tried to rollback.
> 
> Signed-off-by: Kan Liang <kan.liang@intel.com>
[...]

Reviewed-by: Ben Hutchings <ben@decadent.org.uk>

-- 
Ben Hutchings
Lowery's Law:
             If it jams, force it. If it breaks, it needed replacing anyway.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 811 bytes --]

Re: [PATCH V6 2/8] test_bitmap: unit tests for lib/bitmap.c

[David Miller]

From: Kan Liang <kan.liang@intel.com>
Date: Tue, 16 Feb 2016 07:32:38 -0500

> @@ -43,6 +43,7 @@ obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
>  obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
>  obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
>  obj-$(CONFIG_TEST_PRINTF) += test_printf.o
> +obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
 ...
>  
> -TEST_PROGS := printf.sh
> +TEST_PROGS := printf.sh bitmap.sh

I see neither test_bitmap.c nor bitmap.sh in this patch, perhaps some
forgotten git add commands?

RE: [PATCH V6 2/8] test_bitmap: unit tests for lib/bitmap.c

[Liang, Kan]

> 
> From: Kan Liang <kan.liang@intel.com>
> Date: Tue, 16 Feb 2016 07:32:38 -0500
> 
> > @@ -43,6 +43,7 @@ obj-$(CONFIG_TEST_USER_COPY) +=
> test_user_copy.o
> >  obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
> >  obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
> >  obj-$(CONFIG_TEST_PRINTF) += test_printf.o
> > +obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
>  ...
> >
> > -TEST_PROGS := printf.sh
> > +TEST_PROGS := printf.sh bitmap.sh
> 
> I see neither test_bitmap.c nor bitmap.sh in this patch, perhaps some
> forgotten git add commands?

Oh, Right, Sorry for that.

I will re-send the series with latest bitmap update from David Decotigny.

Thanks,
Kan