All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
To: linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org,
	mpe-Gsx/Oe8HsFggBc27wqDAHg@public.gmane.org,
	aik-sLpHqDYs0B2HXe+LvDLADg@public.gmane.org,
	dja-Yfaxwxk/+vWsTnJN9+BGXg@public.gmane.org,
	bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	Gavin Shan
	<gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Subject: [PATCH v8 13/45] powerpc/powernv/ioda1: M64 support on P7IOC
Date: Wed, 17 Feb 2016 14:43:56 +1100	[thread overview]
Message-ID: <1455680668-23298-14-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1455680668-23298-1-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>

This enables M64 window on P7IOC, which has been enabled on PHB3.
Different from PHB3 where 16 M64 BARs are supported and each of
them can be owned by one particular PE# exclusively or divided
evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each
of them are divided to 8 segments. So every P7IOC PHB supports
128 M64 segments in total. P7IOC has M64DT, which helps mapping
one particular M64 segment# to arbitrary PE#. PHB3 doesn't have
M64DT, indicating that one M64 segment can only be pinned to the
fixed PE#. In order to have same code to support M64 on P7IOC and
PHB3, we just provide 128 M64 segments on every P7IOC PHB and each
of them is pinned to the fixed PE# by bypassing the function of
M64DT. In turn, we just need different phb->init_m64() for P7IOC
and PHB3 to support M64.

Signed-off-by: Gavin Shan <gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 86 +++++++++++++++++++++++++++++--
 arch/powerpc/platforms/powernv/pci.h      |  3 ++
 2 files changed, 86 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 1dc663a..8488238 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -246,6 +246,64 @@ static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev,
 	}
 }
 
+static int pnv_ioda1_init_m64(struct pnv_phb *phb)
+{
+	struct resource *r;
+	int index;
+
+	/*
+	 * There are 16 M64 BARs, each of which has 8 segments. So
+	 * there are as many M64 segments as the maximum number of
+	 * PEs, which is 128.
+	 */
+	for (index = 0; index < PNV_IODA1_M64_NUM; index++) {
+		unsigned long base, segsz = phb->ioda.m64_segsize;
+		int64_t rc;
+
+		base = phb->ioda.m64_base +
+		       index * PNV_IODA1_M64_SEGS * segsz;
+		rc = opal_pci_set_phb_mem_window(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, index, base, 0,
+				PNV_IODA1_M64_SEGS * segsz);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("  Error %lld setting M64 PHB#%d-BAR#%d\n",
+				rc, phb->hose->global_number, index);
+			goto fail;
+		}
+
+		rc = opal_pci_phb_mmio_enable(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, index,
+				OPAL_ENABLE_M64_SPLIT);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("  Error %lld enabling M64 PHB#%d-BAR#%d\n",
+				rc, phb->hose->global_number, index);
+			goto fail;
+		}
+	}
+
+	/*
+	 * Exclude the segment used by the reserved PE, which
+	 * is expected to be 0 or last supported PE#.
+	 */
+	r = &phb->hose->mem_resources[1];
+	if (phb->ioda.reserved_pe_idx == 0)
+		r->start += phb->ioda.m64_segsize;
+	else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
+		r->end -= phb->ioda.m64_segsize;
+	else
+		pr_warn("  Cannot cut M64 segment for reserved PE#%d\n",
+			phb->ioda.reserved_pe_idx);
+
+	return 0;
+
+fail:
+	for ( ; index >= 0; index--)
+		opal_pci_phb_mmio_enable(phb->opal_id,
+			OPAL_M64_WINDOW_TYPE, index, OPAL_DISABLE_M64);
+
+	return -EIO;
+}
+
 static void pnv_ioda_reserve_m64_pe(struct pci_bus *bus,
 				    unsigned long *pe_bitmap,
 				    bool all)
@@ -315,6 +373,26 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
 			pe->master = master_pe;
 			list_add_tail(&pe->list, &master_pe->slaves);
 		}
+
+		/*
+		 * P7IOC supports M64DT, which helps mapping M64 segment
+		 * to one particular PE#. However, PHB3 has fixed mapping
+		 * between M64 segment and PE#. In order to have same logic
+		 * for P7IOC and PHB3, we enforce fixed mapping between M64
+		 * segment and PE# on P7IOC.
+		 */
+		if (phb->type == PNV_PHB_IODA1) {
+			int64_t rc;
+
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+					pe->pe_number, OPAL_M64_WINDOW_TYPE,
+					pe->pe_number / PNV_IODA1_M64_SEGS,
+					pe->pe_number % PNV_IODA1_M64_SEGS);
+			if (rc != OPAL_SUCCESS)
+				pr_warn("%s: Error %lld mapping M64 for PHB#%d-PE#%d\n",
+					__func__, rc, phb->hose->global_number,
+					pe->pe_number);
+		}
 	}
 
 	kfree(pe_alloc);
@@ -329,8 +407,7 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
 	const u32 *r;
 	u64 pci_addr;
 
-	/* FIXME: Support M64 for P7IOC */
-	if (phb->type != PNV_PHB_IODA2) {
+	if (phb->type != PNV_PHB_IODA1 && phb->type != PNV_PHB_IODA2) {
 		pr_info("  Not support M64 window\n");
 		return;
 	}
@@ -364,7 +441,10 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
 
 	/* Use last M64 BAR to cover M64 window */
 	phb->ioda.m64_bar_idx = 15;
-	phb->init_m64 = pnv_ioda2_init_m64;
+	if (phb->type == PNV_PHB_IODA1)
+		phb->init_m64 = pnv_ioda1_init_m64;
+	else
+		phb->init_m64 = pnv_ioda2_init_m64;
 	phb->reserve_m64_pe = pnv_ioda_reserve_m64_pe;
 	phb->pick_m64_pe = pnv_ioda_pick_m64_pe;
 }
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 866a5ea..00539ff 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -82,6 +82,9 @@ struct pnv_ioda_pe {
 	struct list_head	list;
 };
 
+#define PNV_IODA1_M64_NUM	16	/* Number of M64 BARs   */
+#define PNV_IODA1_M64_SEGS	8	/* Segments per M64 BAR */
+
 #define PNV_PHB_FLAG_EEH	(1 << 0)
 
 struct pnv_phb {
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	benh@kernel.crashing.org, mpe@ellerman.id.au, aik@ozlabs.ru,
	dja@axtens.net, bhelgaas@google.com, robherring2@gmail.com,
	grant.likely@linaro.org, Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v8 13/45] powerpc/powernv/ioda1: M64 support on P7IOC
Date: Wed, 17 Feb 2016 14:43:56 +1100	[thread overview]
Message-ID: <1455680668-23298-14-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1455680668-23298-1-git-send-email-gwshan@linux.vnet.ibm.com>

This enables M64 window on P7IOC, which has been enabled on PHB3.
Different from PHB3 where 16 M64 BARs are supported and each of
them can be owned by one particular PE# exclusively or divided
evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each
of them are divided to 8 segments. So every P7IOC PHB supports
128 M64 segments in total. P7IOC has M64DT, which helps mapping
one particular M64 segment# to arbitrary PE#. PHB3 doesn't have
M64DT, indicating that one M64 segment can only be pinned to the
fixed PE#. In order to have same code to support M64 on P7IOC and
PHB3, we just provide 128 M64 segments on every P7IOC PHB and each
of them is pinned to the fixed PE# by bypassing the function of
M64DT. In turn, we just need different phb->init_m64() for P7IOC
and PHB3 to support M64.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 86 +++++++++++++++++++++++++++++--
 arch/powerpc/platforms/powernv/pci.h      |  3 ++
 2 files changed, 86 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 1dc663a..8488238 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -246,6 +246,64 @@ static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev,
 	}
 }
 
+static int pnv_ioda1_init_m64(struct pnv_phb *phb)
+{
+	struct resource *r;
+	int index;
+
+	/*
+	 * There are 16 M64 BARs, each of which has 8 segments. So
+	 * there are as many M64 segments as the maximum number of
+	 * PEs, which is 128.
+	 */
+	for (index = 0; index < PNV_IODA1_M64_NUM; index++) {
+		unsigned long base, segsz = phb->ioda.m64_segsize;
+		int64_t rc;
+
+		base = phb->ioda.m64_base +
+		       index * PNV_IODA1_M64_SEGS * segsz;
+		rc = opal_pci_set_phb_mem_window(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, index, base, 0,
+				PNV_IODA1_M64_SEGS * segsz);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("  Error %lld setting M64 PHB#%d-BAR#%d\n",
+				rc, phb->hose->global_number, index);
+			goto fail;
+		}
+
+		rc = opal_pci_phb_mmio_enable(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, index,
+				OPAL_ENABLE_M64_SPLIT);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("  Error %lld enabling M64 PHB#%d-BAR#%d\n",
+				rc, phb->hose->global_number, index);
+			goto fail;
+		}
+	}
+
+	/*
+	 * Exclude the segment used by the reserved PE, which
+	 * is expected to be 0 or last supported PE#.
+	 */
+	r = &phb->hose->mem_resources[1];
+	if (phb->ioda.reserved_pe_idx == 0)
+		r->start += phb->ioda.m64_segsize;
+	else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
+		r->end -= phb->ioda.m64_segsize;
+	else
+		pr_warn("  Cannot cut M64 segment for reserved PE#%d\n",
+			phb->ioda.reserved_pe_idx);
+
+	return 0;
+
+fail:
+	for ( ; index >= 0; index--)
+		opal_pci_phb_mmio_enable(phb->opal_id,
+			OPAL_M64_WINDOW_TYPE, index, OPAL_DISABLE_M64);
+
+	return -EIO;
+}
+
 static void pnv_ioda_reserve_m64_pe(struct pci_bus *bus,
 				    unsigned long *pe_bitmap,
 				    bool all)
@@ -315,6 +373,26 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
 			pe->master = master_pe;
 			list_add_tail(&pe->list, &master_pe->slaves);
 		}
+
+		/*
+		 * P7IOC supports M64DT, which helps mapping M64 segment
+		 * to one particular PE#. However, PHB3 has fixed mapping
+		 * between M64 segment and PE#. In order to have same logic
+		 * for P7IOC and PHB3, we enforce fixed mapping between M64
+		 * segment and PE# on P7IOC.
+		 */
+		if (phb->type == PNV_PHB_IODA1) {
+			int64_t rc;
+
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+					pe->pe_number, OPAL_M64_WINDOW_TYPE,
+					pe->pe_number / PNV_IODA1_M64_SEGS,
+					pe->pe_number % PNV_IODA1_M64_SEGS);
+			if (rc != OPAL_SUCCESS)
+				pr_warn("%s: Error %lld mapping M64 for PHB#%d-PE#%d\n",
+					__func__, rc, phb->hose->global_number,
+					pe->pe_number);
+		}
 	}
 
 	kfree(pe_alloc);
@@ -329,8 +407,7 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
 	const u32 *r;
 	u64 pci_addr;
 
-	/* FIXME: Support M64 for P7IOC */
-	if (phb->type != PNV_PHB_IODA2) {
+	if (phb->type != PNV_PHB_IODA1 && phb->type != PNV_PHB_IODA2) {
 		pr_info("  Not support M64 window\n");
 		return;
 	}
@@ -364,7 +441,10 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
 
 	/* Use last M64 BAR to cover M64 window */
 	phb->ioda.m64_bar_idx = 15;
-	phb->init_m64 = pnv_ioda2_init_m64;
+	if (phb->type == PNV_PHB_IODA1)
+		phb->init_m64 = pnv_ioda1_init_m64;
+	else
+		phb->init_m64 = pnv_ioda2_init_m64;
 	phb->reserve_m64_pe = pnv_ioda_reserve_m64_pe;
 	phb->pick_m64_pe = pnv_ioda_pick_m64_pe;
 }
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 866a5ea..00539ff 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -82,6 +82,9 @@ struct pnv_ioda_pe {
 	struct list_head	list;
 };
 
+#define PNV_IODA1_M64_NUM	16	/* Number of M64 BARs   */
+#define PNV_IODA1_M64_SEGS	8	/* Segments per M64 BAR */
+
 #define PNV_PHB_FLAG_EEH	(1 << 0)
 
 struct pnv_phb {
-- 
2.1.0


  parent reply	other threads:[~2016-02-17  3:43 UTC|newest]

Thread overview: 174+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-17  3:43 [PATCH v8 00/45] powerpc/powernv: PCI hotplug support Gavin Shan
2016-02-17  3:43 ` [PATCH v8 01/45] PCI: Add pcibios_setup_bridge() Gavin Shan
2016-02-17  3:43 ` [PATCH v8 02/45] powerpc/pci: Override pcibios_setup_bridge() Gavin Shan
     [not found]   ` <1455680668-23298-3-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-04-13  5:52     ` Alexey Kardashevskiy
2016-04-13  5:52       ` Alexey Kardashevskiy
2016-02-17  3:43 ` [PATCH v8 03/45] powerpc/pci: Cleanup on struct pci_controller_ops Gavin Shan
2016-02-17  4:18   ` Andrew Donnellan
     [not found]   ` <1455680668-23298-4-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-04-13  5:52     ` Alexey Kardashevskiy
2016-04-13  5:52       ` Alexey Kardashevskiy
2016-04-19 23:59       ` Gavin Shan
2016-02-17  3:43 ` [PATCH v8 04/45] powerpc/powernv: Cleanup on pci_controller_ops instances Gavin Shan
2016-02-17  4:38   ` Andrew Donnellan
2016-02-17  3:43 ` [PATCH v8 06/45] powerpc/powernv: Reorder fields in struct pnv_phb Gavin Shan
2016-04-13  5:56   ` Alexey Kardashevskiy
2016-02-17  3:43 ` [PATCH v8 07/45] powerpc/powernv: Rename PE# " Gavin Shan
2016-04-13  5:57   ` Alexey Kardashevskiy
2016-02-17  3:43 ` [PATCH v8 08/45] powerpc/powernv: Fix initial IO and M32 segmap Gavin Shan
2016-04-13  6:21   ` Alexey Kardashevskiy
2016-04-13  7:53     ` Gavin Shan
2016-04-13  7:53       ` Gavin Shan
2016-04-13  9:53       ` Alexey Kardashevskiy
2016-02-17  3:43 ` [PATCH v8 09/45] powerpc/powernv: Simplify pnv_ioda_setup_pe_seg() Gavin Shan
2016-04-13  6:45   ` Alexey Kardashevskiy
2016-04-20  0:04     ` Gavin Shan
2016-02-17  3:43 ` [PATCH v8 10/45] powerpc/powernv: IO and M32 mapping based on PCI device resources Gavin Shan
2016-02-17  3:43 ` [PATCH v8 11/45] powerpc/powernv: Track M64 segment consumption Gavin Shan
2016-04-13  7:09   ` Alexey Kardashevskiy
2016-04-20  0:05     ` Gavin Shan
2016-02-17  3:43 ` [PATCH v8 12/45] powerpc/powernv: Rename M64 related functions Gavin Shan
     [not found]   ` <1455680668-23298-13-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-04-13  7:20     ` Alexey Kardashevskiy
2016-04-13  7:20       ` Alexey Kardashevskiy
2016-02-17  3:43 ` [PATCH v8 14/45] powerpc/powernv/ioda1: Rename pnv_pci_ioda_setup_dma_pe() Gavin Shan
2016-04-13  7:36   ` Alexey Kardashevskiy
2016-02-17  3:43 ` [PATCH v8 16/45] powerpc/powernv: Remove DMA32 PE list Gavin Shan
2016-04-13  8:59   ` Alexey Kardashevskiy
2016-04-20  0:34     ` Gavin Shan
2016-02-17  3:44 ` [PATCH v8 18/45] powerpc/powernv: Increase PE# capacity Gavin Shan
2016-04-19  2:02   ` Alexey Kardashevskiy
2016-04-20  0:52     ` Gavin Shan
2016-02-17  3:44 ` [PATCH v8 19/45] powerpc/powernv: Use PE instead of number during setup and release Gavin Shan
2016-04-19  2:50   ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 20/45] powerpc/powernv: Allocate PE# in reverse order Gavin Shan
2016-04-19  3:07   ` Alexey Kardashevskiy
2016-04-20  1:04     ` Gavin Shan
2016-02-17  3:44 ` [PATCH v8 21/45] powerpc/powernv: Create PEs at PCI hot plugging time Gavin Shan
2016-04-19  4:16   ` Alexey Kardashevskiy
2016-04-20  1:12     ` Gavin Shan
2016-04-20  3:00       ` Alexey Kardashevskiy
2016-04-20  3:35         ` Gavin Shan
2016-02-17  3:44 ` [PATCH v8 22/45] powerpc/powernv/ioda1: Support releasing IODA1 TCE table Gavin Shan
2016-04-19  4:28   ` Alexey Kardashevskiy
2016-04-20  1:15     ` Gavin Shan
2016-04-20  3:17       ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 23/45] powerpc/powernv: Dynamically release PEs Gavin Shan
2016-04-19  5:19   ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 24/45] powerpc/pci: Rename pcibios_{add,remove}_pci_devices() Gavin Shan
2016-02-17  3:44   ` [PATCH v8 24/45] powerpc/pci: Rename pcibios_{add, remove}_pci_devices() Gavin Shan
2016-04-19  5:28   ` [PATCH v8 24/45] powerpc/pci: Rename pcibios_{add,remove}_pci_devices() Alexey Kardashevskiy
2016-04-20  1:23     ` Gavin Shan
2016-04-20  3:21       ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 25/45] powerpc/pci: Rename pcibios_find_pci_bus() Gavin Shan
2016-04-19  5:31   ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 26/45] powerpc/pci: Move pci_find_bus_by_node() around Gavin Shan
2016-02-17  3:44 ` [PATCH v8 27/45] powerpc/pci: Export pci_add_device_node_info() Gavin Shan
2016-04-19  5:35   ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 28/45] powerpc/pci: Introduce pci_remove_device_node_info() Gavin Shan
2016-04-19  5:48   ` Alexey Kardashevskiy
2016-04-20  1:25     ` Gavin Shan
2016-02-17  3:44 ` [PATCH v8 29/45] powerpc/pci: Export pci_traverse_device_nodes() Gavin Shan
     [not found]   ` <1455680668-23298-30-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-04-19  5:51     ` Alexey Kardashevskiy
2016-04-19  5:51       ` Alexey Kardashevskiy
2016-04-20  1:27       ` Gavin Shan
2016-04-20  3:39         ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 30/45] powerpc/pci: Delay populating pdn Gavin Shan
2016-04-19  8:19   ` Alexey Kardashevskiy
2016-04-20  2:13     ` Gavin Shan
2016-04-20  3:54       ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 31/45] powerpc/pci: Don't scan empty slot Gavin Shan
2016-04-19  8:19   ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 32/45] powerpc/pci: Update bridge windows on PCI plug Gavin Shan
2016-04-19  8:47   ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 33/45] powerpc/powernv: Simplify pnv_eeh_reset() Gavin Shan
2016-02-17  4:35   ` Andrew Donnellan
2016-04-19  8:49   ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 34/45] powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus() Gavin Shan
2016-04-19  8:57   ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 35/45] powerpc/powernv: Fundamental reset " Gavin Shan
     [not found]   ` <1455680668-23298-36-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-04-19  9:04     ` Alexey Kardashevskiy
2016-04-19  9:04       ` Alexey Kardashevskiy
2016-04-20  1:36       ` Gavin Shan
2016-02-17  3:44 ` [PATCH v8 36/45] powerpc/powernv: Support PCI slot ID Gavin Shan
     [not found]   ` <1455680668-23298-37-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-04-19  9:28     ` Alexey Kardashevskiy
2016-04-19  9:28       ` Alexey Kardashevskiy
2016-04-20  2:28       ` Gavin Shan
2016-04-20  4:14         ` Alexey Kardashevskiy
2016-04-22  4:23           ` Alistair Popple
2016-02-17  3:44 ` [PATCH v8 37/45] powerpc/powernv: Use firmware PCI slot reset infrastructure Gavin Shan
2016-04-19  9:34   ` Alexey Kardashevskiy
2016-04-20  2:33     ` Gavin Shan
2016-04-20  4:17       ` Alexey Kardashevskiy
2016-02-17  3:44 ` [PATCH v8 39/45] powerpc/powernv: Select OF_DYNAMIC Gavin Shan
2016-04-19  9:42   ` Alexey Kardashevskiy
2016-04-20  2:38     ` Gavin Shan
2016-02-17  3:44 ` [PATCH v8 40/45] drivers/of: Split unflatten_dt_node() Gavin Shan
2016-02-17 14:30   ` Rob Herring
2016-04-20  2:38     ` Gavin Shan
2016-05-02  2:02     ` Gavin Shan
2016-02-17  3:44 ` [PATCH v8 41/45] drivers/of: Avoid recursively calling unflatten_dt_node() Gavin Shan
2016-02-17 14:53   ` Rob Herring
2016-02-17 14:53     ` Rob Herring
2016-02-17  3:44 ` [PATCH v8 43/45] drivers/of: Specify parent node in of_fdt_unflatten_tree() Gavin Shan
2016-02-17 15:00   ` Rob Herring
2016-02-17 15:58   ` Jyri Sarha
2016-02-17 15:58     ` Jyri Sarha
2016-02-17  3:44 ` [PATCH v8 44/45] drivers/of: Return allocated memory from of_fdt_unflatten_tree() Gavin Shan
     [not found] ` <1455680668-23298-1-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-02-17  3:43   ` [PATCH v8 05/45] powerpc/powernv: Drop phb->bdfn_to_pe() Gavin Shan
2016-02-17  3:43     ` Gavin Shan
2016-04-13  5:53     ` Alexey Kardashevskiy
2016-02-17  3:43   ` Gavin Shan [this message]
2016-02-17  3:43     ` [PATCH v8 13/45] powerpc/powernv/ioda1: M64 support on P7IOC Gavin Shan
2016-04-13  7:47     ` Alexey Kardashevskiy
2016-04-20  0:22       ` Gavin Shan
2016-04-20  2:55         ` Alexey Kardashevskiy
2016-02-17  3:43   ` [PATCH v8 15/45] powerpc/powernv/ioda1: Introduce PNV_IODA1_DMA32_SEGSIZE Gavin Shan
2016-02-17  3:43     ` Gavin Shan
2016-04-13  8:29     ` Alexey Kardashevskiy
2016-04-13 23:54       ` Gavin Shan
2016-04-14  3:36         ` Alexey Kardashevskiy
2016-04-20  0:25           ` Gavin Shan
2016-02-17  3:44   ` [PATCH v8 17/45] powerpc/powernv/ioda1: Improve DMA32 segment track Gavin Shan
2016-02-17  3:44     ` Gavin Shan
2016-04-19  1:50     ` Alexey Kardashevskiy
2016-04-20  0:49       ` Gavin Shan
2016-04-20  5:10         ` Alexey Kardashevskiy
2016-02-17  3:44   ` [PATCH v8 38/45] powerpc/powernv: Functions to get/set PCI slot status Gavin Shan
2016-02-17  3:44     ` Gavin Shan
2016-04-19  9:39     ` Alexey Kardashevskiy
2016-04-20  2:36       ` Gavin Shan
2016-04-20  4:25         ` Alexey Kardashevskiy
2016-02-17  3:44   ` [PATCH v8 42/45] drivers/of: Rename unflatten_dt_node() Gavin Shan
2016-02-17  3:44     ` Gavin Shan
     [not found]     ` <1455680668-23298-43-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-02-17 14:59       ` Rob Herring
2016-02-17 14:59         ` Rob Herring
2016-02-19  3:16         ` Gavin Shan
2016-03-02  2:40           ` Rob Herring
2016-03-02  2:40             ` Rob Herring
2016-03-08  0:56             ` Gavin Shan
2016-03-17 13:31               ` Rob Herring
2016-03-17 22:44                 ` Gavin Shan
2016-02-17  3:44   ` [PATCH v8 45/45] PCI/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
2016-02-17  3:44     ` Gavin Shan
2016-04-15  0:47     ` Alistair Popple
2016-04-15  1:39       ` Gavin Shan
     [not found]     ` <1455680668-23298-46-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2016-04-19 10:36       ` Alexey Kardashevskiy
2016-04-19 10:36         ` Alexey Kardashevskiy
2016-04-20  1:55         ` Alistair Popple
2016-05-02 23:41           ` Gavin Shan
2016-05-03  0:44             ` Alexey Kardashevskiy
2016-05-03  0:44               ` Alexey Kardashevskiy
2016-05-02  3:44         ` Gavin Shan
2016-05-02  6:11           ` Alexey Kardashevskiy
2016-05-02 23:38             ` Gavin Shan
2016-04-13  7:28 ` [PATCH v8 00/45] powerpc/powernv: PCI hotplug support Alexey Kardashevskiy
2016-04-13  7:42   ` Gavin Shan
2016-04-13  9:14     ` Alexey Kardashevskiy
2016-04-13  9:14       ` Alexey Kardashevskiy
2016-04-13 23:42       ` Gavin Shan
2016-04-13 23:57         ` Alistair Popple
2016-04-14  1:30           ` Gavin Shan
2016-04-14  3:38             ` Alexey Kardashevskiy
2016-04-15 16:10             ` Rob Herring
2016-04-20  2:40               ` Gavin Shan
2016-04-14  3:26         ` Alexey Kardashevskiy
2016-04-14  5:25           ` Gavin Shan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455680668-23298-14-git-send-email-gwshan@linux.vnet.ibm.com \
    --to=gwshan-23vcf4htsmix0ybbhkvfkdbpr1lh4cv8@public.gmane.org \
    --cc=aik-sLpHqDYs0B2HXe+LvDLADg@public.gmane.org \
    --cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
    --cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dja-Yfaxwxk/+vWsTnJN9+BGXg@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=mpe-Gsx/Oe8HsFggBc27wqDAHg@public.gmane.org \
    --cc=robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.