All of lore.kernel.org
 help / color / mirror / Atom feed
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, Russell King <linux@arm.linux.org.uk>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/12] ARM: dts: apq8064: add spi5 device node.
Date: Tue, 23 Feb 2016 14:14:33 +0000	[thread overview]
Message-ID: <1456236873-2649-1-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1456236639-1379-1-git-send-email-srinivas.kandagatla@linaro.org>

This patch adds spi5 device node, spi5 is used on ifc6410 on the
expansion connector.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 38 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi      | 14 ++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index ce15c67..0b7b10e 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -64,6 +64,44 @@
 		};
 	};
 
+	spi5_default: spi5_default {
+		pinmux {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio53";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio54";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		pinconf_cs {
+			pins = "gpio53";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
 	gsbi6_uart_2pins: gsbi6_uart_2pins {
 		mux {
 			pins = "gpio14", "gpio15";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 3fb66b9..3fefb2e 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -236,6 +236,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 		};
 
 		gsbi2: gsbi@12480000 {
@@ -304,6 +305,19 @@
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi5_spi: spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+				pinctrl-0 = <&spi5_default &spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		gsbi6: gsbi@16500000 {
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, linux-arm-msm@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@arm.linux.org.uk>,
	linux-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH 05/12] ARM: dts: apq8064: add spi5 device node.
Date: Tue, 23 Feb 2016 14:14:33 +0000	[thread overview]
Message-ID: <1456236873-2649-1-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1456236639-1379-1-git-send-email-srinivas.kandagatla@linaro.org>

This patch adds spi5 device node, spi5 is used on ifc6410 on the
expansion connector.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 38 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi      | 14 ++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index ce15c67..0b7b10e 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -64,6 +64,44 @@
 		};
 	};
 
+	spi5_default: spi5_default {
+		pinmux {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio53";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio54";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		pinconf_cs {
+			pins = "gpio53";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
 	gsbi6_uart_2pins: gsbi6_uart_2pins {
 		mux {
 			pins = "gpio14", "gpio15";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 3fb66b9..3fefb2e 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -236,6 +236,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 		};
 
 		gsbi2: gsbi@12480000 {
@@ -304,6 +305,19 @@
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi5_spi: spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+				pinctrl-0 = <&spi5_default &spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		gsbi6: gsbi@16500000 {
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: srinivas.kandagatla@linaro.org (Srinivas Kandagatla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/12] ARM: dts: apq8064: add spi5 device node.
Date: Tue, 23 Feb 2016 14:14:33 +0000	[thread overview]
Message-ID: <1456236873-2649-1-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1456236639-1379-1-git-send-email-srinivas.kandagatla@linaro.org>

This patch adds spi5 device node, spi5 is used on ifc6410 on the
expansion connector.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 38 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi      | 14 ++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index ce15c67..0b7b10e 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -64,6 +64,44 @@
 		};
 	};
 
+	spi5_default: spi5_default {
+		pinmux {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio53";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio54";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		pinconf_cs {
+			pins = "gpio53";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
 	gsbi6_uart_2pins: gsbi6_uart_2pins {
 		mux {
 			pins = "gpio14", "gpio15";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 3fb66b9..3fefb2e 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -236,6 +236,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 		};
 
 		gsbi2: gsbi at 12480000 {
@@ -304,6 +305,19 @@
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi5_spi: spi at 1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+				pinctrl-0 = <&spi5_default &spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		gsbi6: gsbi at 16500000 {
-- 
1.9.1

  parent reply	other threads:[~2016-02-23 14:14 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-23 14:10 [PATCH 00/12] ARM: dts: apq8064: spi and i2c dt patches Srinivas Kandagatla
2016-02-23 14:10 ` Srinivas Kandagatla
2016-02-23 14:11 ` [PATCH 01/12] ARM: dts: qcom: fix i2c lables to be inline with others Srinivas Kandagatla
2016-02-23 14:11   ` Srinivas Kandagatla
2016-02-23 14:14 ` [PATCH 02/12] ARM: dts: apq8064: move pinctrls to dedicated dtsi Srinivas Kandagatla
2016-02-23 14:14   ` Srinivas Kandagatla
2016-02-23 14:14 ` [PATCH 03/12] ARM: dts: apq8064: add pci support in CM QS600 Srinivas Kandagatla
2016-02-23 14:14   ` Srinivas Kandagatla
2016-02-23 14:14 ` [PATCH 04/12] ARM: dts: apq8064: add i2c sleep pinctrl states Srinivas Kandagatla
2016-02-23 14:14   ` Srinivas Kandagatla
2016-02-23 14:14 ` Srinivas Kandagatla [this message]
2016-02-23 14:14   ` [PATCH 05/12] ARM: dts: apq8064: add spi5 device node Srinivas Kandagatla
2016-02-23 14:14   ` Srinivas Kandagatla
2016-02-23 14:14 ` [PATCH 07/12] ARM: dts: apq8064: add missing i2c2 pinctrl info Srinivas Kandagatla
2016-02-23 14:14   ` Srinivas Kandagatla
2016-02-23 14:14   ` Srinivas Kandagatla
2016-02-23 14:14 ` [PATCH 09/12] ARM: dts: apq8064: add gsbi4 with i2c node Srinivas Kandagatla
2016-02-23 14:14   ` Srinivas Kandagatla
2016-02-23 14:14   ` Srinivas Kandagatla
     [not found] ` <1456236639-1379-1-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-02-23 14:14   ` [PATCH 06/12] ARM: dts: ifc6410: enable spi device on expansion Srinivas Kandagatla
2016-02-23 14:14     ` Srinivas Kandagatla
2016-02-23 14:14     ` Srinivas Kandagatla
2016-02-23 14:14   ` [PATCH 10/12] ARM: dts: ifc6410: enable cam i2c device Srinivas Kandagatla
2016-02-23 14:14     ` Srinivas Kandagatla
2016-02-23 14:14     ` Srinivas Kandagatla
2016-02-23 14:15 ` [PATCH 11/12] ARM: dts: apq8064: add i2c6 device node Srinivas Kandagatla
2016-02-23 14:15   ` Srinivas Kandagatla
2016-02-23 14:15 ` [PATCH 12/12] ARM: dts: ifc6410: add correct aliases to the i2c and spi bus Srinivas Kandagatla
2016-02-23 14:15   ` Srinivas Kandagatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456236873-2649-1-git-send-email-srinivas.kandagatla@linaro.org \
    --to=srinivas.kandagatla@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.