* [PATCH 2/4] ARM: realview: reduce the RealView Kconfig
2016-02-25 13:15 [PATCH 0/4] RealView boardfile endgame Linus Walleij
@ 2016-02-25 13:15 ` Linus Walleij
2016-02-25 13:15 ` [PATCH 3/4] ARM: realview: imply Device Tree config Linus Walleij
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Linus Walleij @ 2016-02-25 13:15 UTC (permalink / raw)
To: linux-arm-kernel
We select all we need to the device tree boot and and do not
really need all the sub-options to get this running smoothly.
We will support the ARMv5, ARMv6, ARMv7 or ARMv6+ARMv7
build depending on what the user selects.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-realview/Kconfig | 127 +++--------------------------------------
1 file changed, 8 insertions(+), 119 deletions(-)
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index def40a0dd60c..cfb4c573638f 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -16,9 +16,13 @@ config REALVIEW_DT
bool "Support RealView(R) Device Tree based boot"
select ARM_GIC
select CLK_SP810
- select HAVE_SMP
+ select CPU_ARM926T if ARCH_MULTI_V5
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select HAVE_PATA_PLATFORM
+ select HAVE_SMP if ARCH_MULTI_V6
+ select HAVE_TCM
select ICST
- select MACH_REALVIEW_EB if ARCH_MULTI_V5
select MFD_SYSCON
select POWER_RESET
select POWER_RESET_VERSATILE
@@ -26,129 +30,14 @@ config REALVIEW_DT
select SMP_ON_UP if SMP
select SOC_REALVIEW
select USE_OF
+ select ZONE_DMA
help
Include support for booting the ARM(R) RealView(R) evaluation
boards using a device tree machine description.
-config MACH_REALVIEW_EB
- bool "Support RealView(R) Emulation Baseboard"
- select ARM_GIC
- select CPU_ARM926T if ARCH_MULTI_V5
- help
- Include support for the ARM(R) RealView(R) Emulation Baseboard
- platform. On an ARMv5 kernel, this will include support for
- the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
- one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
- core tile options should be enabled.
-
-config REALVIEW_EB_ARM1136
- bool "Support ARM1136J(F)-S Tile"
- depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
- select CPU_V6
- help
- Enable support for the ARM1136 tile fitted to the
- Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM1176
- bool "Support ARM1176JZ(F)-S Tile"
- depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
- help
- Enable support for the ARM1176 tile fitted to the
- Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_A9MP
- bool "Support Multicore Cortex-A9 Tile"
- depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- help
- Enable support for the Cortex-A9MPCore tile fitted to the
- Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM11MP
- bool "Support ARM11MPCore Tile"
- depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- help
- Enable support for the ARM11MPCore tile fitted to the Realview(R)
- Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM11MP_REVB
- bool "Support ARM11MPCore RevB Tile"
- depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
- help
- Enable support for the ARM11MPCore Revision B tile on the
- Realview(R) Emulation Baseboard platform. Since there are device
- address differences, a kernel built with this option enabled is
- not compatible with other revisions of the ARM11MPCore tile.
-
-config MACH_REALVIEW_PB11MP
- bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
- depends on ARCH_MULTI_V6
- select ARM_GIC
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_PATA_PLATFORM
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- help
- Include support for the ARM(R) RealView(R) Platform Baseboard for
- the ARM11MPCore. This platform has an on-board ARM11MPCore and has
- support for PCI-E and Compact Flash.
-
-# ARMv6 CPU without K extensions, but does have the new exclusive ops
-config MACH_REALVIEW_PB1176
- bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
- depends on ARCH_MULTI_V6
- select ARM_GIC
- select CPU_V6
- select HAVE_TCM
- select MIGHT_HAVE_CACHE_L2X0
- help
- Include support for the ARM(R) RealView(R) Platform Baseboard for
- ARM1176JZF-S.
-
-config REALVIEW_PB1176_SECURE_FLASH
- bool "Allow access to the secure flash memory block"
- depends on MACH_REALVIEW_PB1176
- default n
- help
- Select this option if Linux will only run in secure mode on the
- RealView PB1176 platform and access to the secure flash memory
- block (64MB @ 0x3c000000) is required.
-
-config MACH_REALVIEW_PBA8
- bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
- depends on ARCH_MULTI_V7
- select ARM_GIC
- select HAVE_PATA_PLATFORM
- help
- Include support for the ARM(R) RealView Platform Baseboard for
- Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has
- support for PCI-E and Compact Flash.
-
-config MACH_REALVIEW_PBX
- bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
- depends on ARCH_MULTI_V7
- select ARM_GIC
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_PATA_PLATFORM
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- select ZONE_DMA
- help
- Include support for the ARM(R) RealView(R) Platform Baseboard
- Explore.
-
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
- depends on MMU && !MACH_REALVIEW_PB1176
+ depends on MMU
default y
help
RealView boards other than PB1176 have the RAM available at
--
2.4.3
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/4] ARM: realview: imply Device Tree config
2016-02-25 13:15 [PATCH 0/4] RealView boardfile endgame Linus Walleij
2016-02-25 13:15 ` [PATCH 2/4] ARM: realview: reduce the RealView Kconfig Linus Walleij
@ 2016-02-25 13:15 ` Linus Walleij
2016-02-25 14:23 ` Arnd Bergmann
2016-02-25 13:15 ` [PATCH 4/4] ARM: realview: cut board options from defconfig Linus Walleij
2016-02-25 14:29 ` [PATCH 0/4] RealView boardfile endgame Arnd Bergmann
3 siblings, 1 reply; 9+ messages in thread
From: Linus Walleij @ 2016-02-25 13:15 UTC (permalink / raw)
To: linux-arm-kernel
This cuts the RealView DT Kconfig to be the same as
CONFIG_ARCH_REALVIEW and rids one Kconfig option.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-realview/Kconfig | 23 ++++++++---------------
arch/arm/mach-realview/Makefile | 2 +-
2 files changed, 9 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index cfb4c573638f..1706adc5513a 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -1,22 +1,12 @@
menuconfig ARCH_REALVIEW
bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
select ARM_AMBA
- select ARM_TIMER_SP804
- select COMMON_CLK_VERSATILE
- select GPIO_PL061 if GPIOLIB
- select ICST
- select PLAT_VERSATILE
- select PLAT_VERSATILE_SCHED_CLOCK
- help
- This enables support for ARM Ltd RealView boards.
-
-if ARCH_REALVIEW
-
-config REALVIEW_DT
- bool "Support RealView(R) Device Tree based boot"
select ARM_GIC
+ select ARM_TIMER_SP804
select CLK_SP810
+ select COMMON_CLK_VERSATILE
select CPU_ARM926T if ARCH_MULTI_V5
+ select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
@@ -24,6 +14,8 @@ config REALVIEW_DT
select HAVE_TCM
select ICST
select MFD_SYSCON
+ select PLAT_VERSATILE
+ select PLAT_VERSATILE_SCHED_CLOCK
select POWER_RESET
select POWER_RESET_VERSATILE
select POWER_SUPPLY
@@ -32,8 +24,9 @@ config REALVIEW_DT
select USE_OF
select ZONE_DMA
help
- Include support for booting the ARM(R) RealView(R) evaluation
- boards using a device tree machine description.
+ This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 97dab53daaf1..75826b2be82e 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -4,6 +4,6 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-versatile/include
-obj-$(CONFIG_REALVIEW_DT) += realview-dt.o
+obj-$(CONFIG_ARCH_REALVIEW) += realview-dt.o
obj-$(CONFIG_SMP) += platsmp-dt.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
--
2.4.3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/4] ARM: realview: imply Device Tree config
2016-02-25 13:15 ` [PATCH 3/4] ARM: realview: imply Device Tree config Linus Walleij
@ 2016-02-25 14:23 ` Arnd Bergmann
2016-02-25 14:58 ` Linus Walleij
0 siblings, 1 reply; 9+ messages in thread
From: Arnd Bergmann @ 2016-02-25 14:23 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 25 February 2016 14:15:10 Linus Walleij wrote:
> @@ -32,8 +24,9 @@ config REALVIEW_DT
> select USE_OF
> select ZONE_DMA
The 'select USE_OF' can now be dropped, I guess this was left over
from the multiplatform patches, but also fits in here.
> help
> - Include support for booting the ARM(R) RealView(R) evaluation
> - boards using a device tree machine description.
> + This enables support for ARM Ltd RealView boards.
> +
> +if ARCH_REALVIEW
>
> config REALVIEW_HIGH_PHYS_OFFSET
> bool "High physical base address for the RealView platform"
>
REALVIEW_HIGH_PHYS_OFFSET can go away as well, as it is only used
in 'realview_fixup', which in turn is called by the removed board
files.
Arnd
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 3/4] ARM: realview: imply Device Tree config
2016-02-25 14:23 ` Arnd Bergmann
@ 2016-02-25 14:58 ` Linus Walleij
0 siblings, 0 replies; 9+ messages in thread
From: Linus Walleij @ 2016-02-25 14:58 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 25, 2016 at 3:23 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 25 February 2016 14:15:10 Linus Walleij wrote:
>> @@ -32,8 +24,9 @@ config REALVIEW_DT
>> select USE_OF
>> select ZONE_DMA
>
> The 'select USE_OF' can now be dropped, I guess this was left over
> from the multiplatform patches, but also fits in here.
>
>> help
>> - Include support for booting the ARM(R) RealView(R) evaluation
>> - boards using a device tree machine description.
>> + This enables support for ARM Ltd RealView boards.
>> +
>> +if ARCH_REALVIEW
>>
>> config REALVIEW_HIGH_PHYS_OFFSET
>> bool "High physical base address for the RealView platform"
>>
>
> REALVIEW_HIGH_PHYS_OFFSET can go away as well, as it is only used
> in 'realview_fixup', which in turn is called by the removed board
> files.
OK I updated the patch cutting these too.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 4/4] ARM: realview: cut board options from defconfig
2016-02-25 13:15 [PATCH 0/4] RealView boardfile endgame Linus Walleij
2016-02-25 13:15 ` [PATCH 2/4] ARM: realview: reduce the RealView Kconfig Linus Walleij
2016-02-25 13:15 ` [PATCH 3/4] ARM: realview: imply Device Tree config Linus Walleij
@ 2016-02-25 13:15 ` Linus Walleij
2016-02-25 14:29 ` [PATCH 0/4] RealView boardfile endgame Arnd Bergmann
3 siblings, 0 replies; 9+ messages in thread
From: Linus Walleij @ 2016-02-25 13:15 UTC (permalink / raw)
To: linux-arm-kernel
This kills off the now unused board configuration symbols for
the different RealView boards from the RealView defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/configs/realview_defconfig | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 9e77dc7b828f..7824b8bf9894 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -11,17 +11,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_REALVIEW=y
-CONFIG_REALVIEW_DT=y
-CONFIG_MACH_REALVIEW_EB=y
-CONFIG_REALVIEW_EB_ARM1136=y
-CONFIG_REALVIEW_EB_ARM1176=y
-CONFIG_REALVIEW_EB_A9MP=y
-CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_REALVIEW_EB_ARM11MP_REVB=y
-CONFIG_MACH_REALVIEW_PB11MP=y
-CONFIG_MACH_REALVIEW_PB1176=y
-CONFIG_MACH_REALVIEW_PBA8=y
-CONFIG_MACH_REALVIEW_PBX=y
CONFIG_SMP=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
--
2.4.3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 0/4] RealView boardfile endgame
2016-02-25 13:15 [PATCH 0/4] RealView boardfile endgame Linus Walleij
` (2 preceding siblings ...)
2016-02-25 13:15 ` [PATCH 4/4] ARM: realview: cut board options from defconfig Linus Walleij
@ 2016-02-25 14:29 ` Arnd Bergmann
2016-02-25 15:29 ` Linus Walleij
3 siblings, 1 reply; 9+ messages in thread
From: Arnd Bergmann @ 2016-02-25 14:29 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 25 February 2016 14:15:07 Linus Walleij wrote:
> This patch set deletes the RealView board files and moves it
> over to a pure Device Tree boot, deleting ~3500 LoC.
>
> Prerequisites:
> - The MTD driver patch handling the flash memory write
> protection and VPP enable must go into the MTD subsystem.
> http://marc.info/?l=linux-arm-kernel&m=145380689210787&w=2
>
> - The CLCD device tree support patches (uncontroversial set)
> must go into the FBDEV subsystem.
> http://marc.info/?l=linux-fbdev&m=145622172219039&w=2
>
> - I must queue the device tree patches for the Evaluation
> Boards and Platform Baseboard and Platform Baseboard
> Explore before these patches.
>
> However this is how it will look once the above is in place,
> and it will support everything the kernel already supports
> today.
>
> Tested on the real hardware for PB1176JZF-S and PB11MPCore.
> Tested on QEMU for 1136, 1176, 11MPCore and Cortex-A9 EB,
> Platform Baseboard for Cortex-A8 and Platform Baseboard Explore
> for Cortex-A9 variants.
>
Awesome!
This leaves the question whether we should do all the preparation
in 4.6 and then only take these for 4.7, or do them all at
once. I can see good reasons either way, but none of them
particularly strong. What did you have in mind here?
Arnd
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH 0/4] RealView boardfile endgame
2016-02-25 14:29 ` [PATCH 0/4] RealView boardfile endgame Arnd Bergmann
@ 2016-02-25 15:29 ` Linus Walleij
2016-02-25 16:10 ` Arnd Bergmann
0 siblings, 1 reply; 9+ messages in thread
From: Linus Walleij @ 2016-02-25 15:29 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 25, 2016 at 3:29 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 25 February 2016 14:15:07 Linus Walleij wrote:
>> This patch set deletes the RealView board files and moves it
>> over to a pure Device Tree boot, deleting ~3500 LoC.
(...)
> This leaves the question whether we should do all the preparation
> in 4.6 and then only take these for 4.7, or do them all at
> once. I can see good reasons either way, but none of them
> particularly strong. What did you have in mind here?
If the dependencies in CLCD and MTD make it in we'll just
merge the whole thing IMO.
If these drag out, we merge the device trees and wait with
removing the board files until v4.7.
I will still have some remaining cleanup for Integrator, Versatile
and also Versatile Express however, but that is for later.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 0/4] RealView boardfile endgame
2016-02-25 15:29 ` Linus Walleij
@ 2016-02-25 16:10 ` Arnd Bergmann
0 siblings, 0 replies; 9+ messages in thread
From: Arnd Bergmann @ 2016-02-25 16:10 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 25 February 2016 16:29:31 Linus Walleij wrote:
> On Thu, Feb 25, 2016 at 3:29 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Thursday 25 February 2016 14:15:07 Linus Walleij wrote:
> >> This patch set deletes the RealView board files and moves it
> >> over to a pure Device Tree boot, deleting ~3500 LoC.
> (...)
> > This leaves the question whether we should do all the preparation
> > in 4.6 and then only take these for 4.7, or do them all at
> > once. I can see good reasons either way, but none of them
> > particularly strong. What did you have in mind here?
>
> If the dependencies in CLCD and MTD make it in we'll just
> merge the whole thing IMO.
>
> If these drag out, we merge the device trees and wait with
> removing the board files until v4.7.
>
> I will still have some remaining cleanup for Integrator, Versatile
> and also Versatile Express however, but that is for later.
>
>
Ok, sounds good.
Arnd
^ permalink raw reply [flat|nested] 9+ messages in thread