* [PATCH v5 0/6] watchdog: pnx4008: add restart handler
@ 2016-02-29 17:31 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel, arnd, linux, manabian; +Cc: linux-watchdog, wim, stigge, vz
From: Sylvain Lemieux <slemieux@tycoint.com>
The LPC32xx provide the capability to perform a soft or hard reset;
a soft reset will no reset the external peripheral
(i.e. RESOUT_N output not asserted).
This changeset migrate the restart code from the "mach-lpc32xx" to
the "pnx-4008" watchdog driver and add the soft reset capability.
The default behavior (i.e. hard reset) remain unchanged.
This patchset have a dependency on the following patch:
watchdog: Add 'action' and 'data' parameters to restart handler callback
http://permalink.gmane.org/gmane.linux.watchdog/3364/
Note:
Patch #5 was generated with the option "--unified=2" to ensure
it can be apply before or after the changes for the new
LPC32xx irqchip driver:
- http://permalink.gmane.org/gmane.linux.drivers.devicetree/144683
---
Changes from v4 to v5:
* Rebased on the following patch:
http://permalink.gmane.org/gmane.linux.watchdog/3364/
Changes from v3 to v4:
* Update the patch as per the feedback received from:
Arnd: http://permalink.gmane.org/gmane.linux.watchdog/3329
- Switch patch #5 and #6 order.
Changes from v2 to v3:
* Update the patch as per the feedback received from:
Joachim: http://permalink.gmane.org/gmane.linux.watchdog/3303
- remove explicit clock enable from restart handler.
- verify "register_restart_handler" return value.
- add call to unregister_restart_handler".
- do the restart handling directly in "pnx4008_restart_handler".
* Move the change to "phy3250.c" into a separate patch and generate
the new patch with the "--unified=2" option.
Changes from v1 to v2:
* Rename patch title;
was "arm: lpc32xx: restart: add support for soft reset"
* Update the patch as per the feedback received from:
Joachim: http://permalink.gmane.org/gmane.linux.ports.arm.kernel/479791
- migrate restart code from "mach-lpc32xx" to "pnx-4008" driver.
* Add soft reset support to "pnx-4008" driver instead of "mach-lpc32xx".
* Use define available in "pnx-4008" when writting to watchdog register.
* Remove restart handler from "mach-lpc32xx".
* Remove restart hook from "phy3250.c".
* Update driver logging during power-on.
Sylvain Lemieux (6):
watchdog: pnx4008: update logging during power-on
watchdog: pnx4008: add restart handler
watchdog: pnx4008: add support for soft reset
watchdog: pnx4008: restart: support "cmd" from userspace
arm: lpc32xx: phy3250 remove restart hook
arm: lpc32xx: remove restart handler
arch/arm/mach-lpc32xx/common.c | 15 ---------------
arch/arm/mach-lpc32xx/common.h | 1 -
arch/arm/mach-lpc32xx/phy3250.c | 1 -
drivers/watchdog/pnx4008_wdt.c | 42 +++++++++++++++++++++++++++++++++++++++--
4 files changed, 40 insertions(+), 19 deletions(-)
--
1.8.3.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v5 0/6] watchdog: pnx4008: add restart handler
@ 2016-02-29 17:31 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel
From: Sylvain Lemieux <slemieux@tycoint.com>
The LPC32xx provide the capability to perform a soft or hard reset;
a soft reset will no reset the external peripheral
(i.e. RESOUT_N output not asserted).
This changeset migrate the restart code from the "mach-lpc32xx" to
the "pnx-4008" watchdog driver and add the soft reset capability.
The default behavior (i.e. hard reset) remain unchanged.
This patchset have a dependency on the following patch:
watchdog: Add 'action' and 'data' parameters to restart handler callback
http://permalink.gmane.org/gmane.linux.watchdog/3364/
Note:
Patch #5 was generated with the option "--unified=2" to ensure
it can be apply before or after the changes for the new
LPC32xx irqchip driver:
- http://permalink.gmane.org/gmane.linux.drivers.devicetree/144683
---
Changes from v4 to v5:
* Rebased on the following patch:
http://permalink.gmane.org/gmane.linux.watchdog/3364/
Changes from v3 to v4:
* Update the patch as per the feedback received from:
Arnd: http://permalink.gmane.org/gmane.linux.watchdog/3329
- Switch patch #5 and #6 order.
Changes from v2 to v3:
* Update the patch as per the feedback received from:
Joachim: http://permalink.gmane.org/gmane.linux.watchdog/3303
- remove explicit clock enable from restart handler.
- verify "register_restart_handler" return value.
- add call to unregister_restart_handler".
- do the restart handling directly in "pnx4008_restart_handler".
* Move the change to "phy3250.c" into a separate patch and generate
the new patch with the "--unified=2" option.
Changes from v1 to v2:
* Rename patch title;
was "arm: lpc32xx: restart: add support for soft reset"
* Update the patch as per the feedback received from:
Joachim: http://permalink.gmane.org/gmane.linux.ports.arm.kernel/479791
- migrate restart code from "mach-lpc32xx" to "pnx-4008" driver.
* Add soft reset support to "pnx-4008" driver instead of "mach-lpc32xx".
* Use define available in "pnx-4008" when writting to watchdog register.
* Remove restart handler from "mach-lpc32xx".
* Remove restart hook from "phy3250.c".
* Update driver logging during power-on.
Sylvain Lemieux (6):
watchdog: pnx4008: update logging during power-on
watchdog: pnx4008: add restart handler
watchdog: pnx4008: add support for soft reset
watchdog: pnx4008: restart: support "cmd" from userspace
arm: lpc32xx: phy3250 remove restart hook
arm: lpc32xx: remove restart handler
arch/arm/mach-lpc32xx/common.c | 15 ---------------
arch/arm/mach-lpc32xx/common.h | 1 -
arch/arm/mach-lpc32xx/phy3250.c | 1 -
drivers/watchdog/pnx4008_wdt.c | 42 +++++++++++++++++++++++++++++++++++++++--
4 files changed, 40 insertions(+), 19 deletions(-)
--
1.8.3.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v5 1/6] watchdog: pnx4008: update logging during power-on
2016-02-29 17:31 ` Sylvain Lemieux
@ 2016-02-29 17:31 ` Sylvain Lemieux
-1 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel, arnd, linux, manabian; +Cc: linux-watchdog, wim, stigge, vz
From: Sylvain Lemieux <slemieux@tycoint.com>
There is no need add the driver name in the text to display
on the console during the power-on:
pnx4008-watchdog 4003c000.watchdog: PNX4008 Watchdog Timer: heartbeat 19 sec
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
Changes from v4 to v5:
- Added Reviewed-by from v4.
Changes from v3 to v4:
- none.
Changes from v2 to v3:
- none.
Changes from v1 to v2:
- new patch in v2.
drivers/watchdog/pnx4008_wdt.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 313cd1c..88264a2 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -178,8 +178,7 @@ static int pnx4008_wdt_probe(struct platform_device *pdev)
goto disable_clk;
}
- dev_info(&pdev->dev, "PNX4008 Watchdog Timer: heartbeat %d sec\n",
- pnx4008_wdd.timeout);
+ dev_info(&pdev->dev, "heartbeat %d sec\n", pnx4008_wdd.timeout);
return 0;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 1/6] watchdog: pnx4008: update logging during power-on
@ 2016-02-29 17:31 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel
From: Sylvain Lemieux <slemieux@tycoint.com>
There is no need add the driver name in the text to display
on the console during the power-on:
pnx4008-watchdog 4003c000.watchdog: PNX4008 Watchdog Timer: heartbeat 19 sec
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
Changes from v4 to v5:
- Added Reviewed-by from v4.
Changes from v3 to v4:
- none.
Changes from v2 to v3:
- none.
Changes from v1 to v2:
- new patch in v2.
drivers/watchdog/pnx4008_wdt.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 313cd1c..88264a2 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -178,8 +178,7 @@ static int pnx4008_wdt_probe(struct platform_device *pdev)
goto disable_clk;
}
- dev_info(&pdev->dev, "PNX4008 Watchdog Timer: heartbeat %d sec\n",
- pnx4008_wdd.timeout);
+ dev_info(&pdev->dev, "heartbeat %d sec\n", pnx4008_wdd.timeout);
return 0;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 2/6] watchdog: pnx4008: add restart handler
2016-02-29 17:31 ` Sylvain Lemieux
@ 2016-02-29 17:31 ` Sylvain Lemieux
-1 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel, arnd, linux, manabian; +Cc: linux-watchdog, wim, stigge, vz
From: Sylvain Lemieux <slemieux@tycoint.com>
Add restart handler capability to the driver;
the restart handler implementation was taken from
"mach-lpc32xx" ("lpc23xx_restart" function).
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes from v4 to v5:
- Rebased on the following patch:
http://permalink.gmane.org/gmane.linux.watchdog/3364/
Changes from v3 to v4:
- none.
Changes from v2 to v3:
- remove explicit clock enable from restart handler.
- verify "register_restart_handler" return value.
- add call to unregister_restart_handler".
- do the restart handling directly in "pnx4008_restart_handler".
Changes from v1 to v2:
- new patch in v2.
drivers/watchdog/pnx4008_wdt.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 88264a2..f3be522 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -31,6 +31,8 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
#include <mach/hardware.h>
/* WatchDog Timer - Chapter 23 Page 207 */
@@ -124,6 +126,19 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
return 0;
}
+static int pnx4008_restart_handler(struct watchdog_device *wdd,
+ unsigned long mode, void *cmd)
+{
+ /* Instant assert of RESETOUT_N with pulse length 1mS */
+ writel(13000, WDTIM_PULSE(wdt_base));
+ writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+
+ /* Wait for watchdog to reset system */
+ mdelay(1000);
+
+ return NOTIFY_DONE;
+}
+
static const struct watchdog_info pnx4008_wdt_ident = {
.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
@@ -135,6 +150,7 @@ static const struct watchdog_ops pnx4008_wdt_ops = {
.start = pnx4008_wdt_start,
.stop = pnx4008_wdt_stop,
.set_timeout = pnx4008_wdt_set_timeout,
+ .restart = pnx4008_restart_handler,
};
static struct watchdog_device pnx4008_wdd = {
@@ -169,6 +185,7 @@ static int pnx4008_wdt_probe(struct platform_device *pdev)
WDIOF_CARDRESET : 0;
pnx4008_wdd.parent = &pdev->dev;
watchdog_set_nowayout(&pnx4008_wdd, nowayout);
+ watchdog_set_restart_priority(&pnx4008_wdd, 128);
pnx4008_wdt_stop(&pnx4008_wdd); /* disable for now */
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 2/6] watchdog: pnx4008: add restart handler
@ 2016-02-29 17:31 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel
From: Sylvain Lemieux <slemieux@tycoint.com>
Add restart handler capability to the driver;
the restart handler implementation was taken from
"mach-lpc32xx" ("lpc23xx_restart" function).
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes from v4 to v5:
- Rebased on the following patch:
http://permalink.gmane.org/gmane.linux.watchdog/3364/
Changes from v3 to v4:
- none.
Changes from v2 to v3:
- remove explicit clock enable from restart handler.
- verify "register_restart_handler" return value.
- add call to unregister_restart_handler".
- do the restart handling directly in "pnx4008_restart_handler".
Changes from v1 to v2:
- new patch in v2.
drivers/watchdog/pnx4008_wdt.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 88264a2..f3be522 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -31,6 +31,8 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
#include <mach/hardware.h>
/* WatchDog Timer - Chapter 23 Page 207 */
@@ -124,6 +126,19 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
return 0;
}
+static int pnx4008_restart_handler(struct watchdog_device *wdd,
+ unsigned long mode, void *cmd)
+{
+ /* Instant assert of RESETOUT_N with pulse length 1mS */
+ writel(13000, WDTIM_PULSE(wdt_base));
+ writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+
+ /* Wait for watchdog to reset system */
+ mdelay(1000);
+
+ return NOTIFY_DONE;
+}
+
static const struct watchdog_info pnx4008_wdt_ident = {
.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
@@ -135,6 +150,7 @@ static const struct watchdog_ops pnx4008_wdt_ops = {
.start = pnx4008_wdt_start,
.stop = pnx4008_wdt_stop,
.set_timeout = pnx4008_wdt_set_timeout,
+ .restart = pnx4008_restart_handler,
};
static struct watchdog_device pnx4008_wdd = {
@@ -169,6 +185,7 @@ static int pnx4008_wdt_probe(struct platform_device *pdev)
WDIOF_CARDRESET : 0;
pnx4008_wdd.parent = &pdev->dev;
watchdog_set_nowayout(&pnx4008_wdd, nowayout);
+ watchdog_set_restart_priority(&pnx4008_wdd, 128);
pnx4008_wdt_stop(&pnx4008_wdd); /* disable for now */
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset
2016-02-29 17:31 ` Sylvain Lemieux
@ 2016-02-29 17:31 ` Sylvain Lemieux
-1 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel, arnd, linux, manabian; +Cc: linux-watchdog, wim, stigge, vz
From: Sylvain Lemieux <slemieux@tycoint.com>
Add support for explicit soft reset using the reboot mode.
The default reboot mode behavior is unchanged;
you can overwrite the default reboot type in the board specific file
"DT_MACHINE_START" definition using the "reboot_mode" parameter.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes from v4 to v5:
- no logical change; updated to work with new revision of patch #2.
Changes from v3 to v4:
- none.
Changes from v2 to v3:
- no logical change; updated to work with new revision of patch #2.
Changes from v1 to v2:
- Rename patch title;
was "arm: lpc32xx: restart: add support for soft reset"
- Add change to "pnx-4008" driver instead of "mach-lpc32xx".
- Use define available in "pnx-4008" when writting to watchdog register.
drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index f3be522..e05bfecf 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -129,9 +129,16 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
static int pnx4008_restart_handler(struct watchdog_device *wdd,
unsigned long mode, void *cmd)
{
- /* Instant assert of RESETOUT_N with pulse length 1mS */
- writel(13000, WDTIM_PULSE(wdt_base));
- writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+ if (mode == (unsigned long)REBOOT_SOFT) {
+ /* Force match output active */
+ writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
+ /* Internal reset on match output (RESOUT_N not asserted) */
+ writel(M_RES1, WDTIM_MCTRL(wdt_base));
+ } else {
+ /* Instant assert of RESETOUT_N with pulse length 1mS */
+ writel(13000, WDTIM_PULSE(wdt_base));
+ writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+ }
/* Wait for watchdog to reset system */
mdelay(1000);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset
@ 2016-02-29 17:31 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel
From: Sylvain Lemieux <slemieux@tycoint.com>
Add support for explicit soft reset using the reboot mode.
The default reboot mode behavior is unchanged;
you can overwrite the default reboot type in the board specific file
"DT_MACHINE_START" definition using the "reboot_mode" parameter.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes from v4 to v5:
- no logical change; updated to work with new revision of patch #2.
Changes from v3 to v4:
- none.
Changes from v2 to v3:
- no logical change; updated to work with new revision of patch #2.
Changes from v1 to v2:
- Rename patch title;
was "arm: lpc32xx: restart: add support for soft reset"
- Add change to "pnx-4008" driver instead of "mach-lpc32xx".
- Use define available in "pnx-4008" when writting to watchdog register.
drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index f3be522..e05bfecf 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -129,9 +129,16 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
static int pnx4008_restart_handler(struct watchdog_device *wdd,
unsigned long mode, void *cmd)
{
- /* Instant assert of RESETOUT_N with pulse length 1mS */
- writel(13000, WDTIM_PULSE(wdt_base));
- writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+ if (mode == (unsigned long)REBOOT_SOFT) {
+ /* Force match output active */
+ writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
+ /* Internal reset on match output (RESOUT_N not asserted) */
+ writel(M_RES1, WDTIM_MCTRL(wdt_base));
+ } else {
+ /* Instant assert of RESETOUT_N with pulse length 1mS */
+ writel(13000, WDTIM_PULSE(wdt_base));
+ writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+ }
/* Wait for watchdog to reset system */
mdelay(1000);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 4/6] watchdog: pnx4008: restart: support "cmd" from userspace
2016-02-29 17:31 ` Sylvain Lemieux
@ 2016-02-29 17:31 ` Sylvain Lemieux
-1 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel, arnd, linux, manabian; +Cc: linux-watchdog, wim, stigge, vz
From: Sylvain Lemieux <slemieux@tycoint.com>
Added support to verify if a "cmd" is passed from the userspace program rebooting the system;
- if a valid "cmd" is available, handle it;
- If the received "cmd" is not supported, use the default reboot mode.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes from v4 to v5:
- no logical change; updated to work with new revision of patch #2.
Changes from v3 to v4:
- none.
Changes from v2 to v3:
- no logical change; updated to work with new revision of patch #2.
Changes from v1 to v2:
- Rename patch title;
was "arm: lpc32xx: restart: support "cmd" from userspace"
- Add change to "pnx-4008" driver instead of "mach-lpc32xx".
drivers/watchdog/pnx4008_wdt.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index e05bfecf..df76231 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -129,6 +129,21 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
static int pnx4008_restart_handler(struct watchdog_device *wdd,
unsigned long mode, void *cmd)
{
+ const char *boot_cmd = (const char *)cmd;
+
+ /*
+ * Verify if a "cmd" passed from the userspace program rebooting
+ * the system; if available, handle it.
+ * - For details, see the 'reboot' syscall in kernel/reboot.c
+ * - If the received "cmd" is not supported, use the default mode.
+ */
+ if (boot_cmd) {
+ if (boot_cmd[0] == 'h')
+ mode = (unsigned long)REBOOT_HARD;
+ else if (boot_cmd[0] == 's')
+ mode = (unsigned long)REBOOT_SOFT;
+ }
+
if (mode == (unsigned long)REBOOT_SOFT) {
/* Force match output active */
writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 4/6] watchdog: pnx4008: restart: support "cmd" from userspace
@ 2016-02-29 17:31 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel
From: Sylvain Lemieux <slemieux@tycoint.com>
Added support to verify if a "cmd" is passed from the userspace program rebooting the system;
- if a valid "cmd" is available, handle it;
- If the received "cmd" is not supported, use the default reboot mode.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes from v4 to v5:
- no logical change; updated to work with new revision of patch #2.
Changes from v3 to v4:
- none.
Changes from v2 to v3:
- no logical change; updated to work with new revision of patch #2.
Changes from v1 to v2:
- Rename patch title;
was "arm: lpc32xx: restart: support "cmd" from userspace"
- Add change to "pnx-4008" driver instead of "mach-lpc32xx".
drivers/watchdog/pnx4008_wdt.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index e05bfecf..df76231 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -129,6 +129,21 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
static int pnx4008_restart_handler(struct watchdog_device *wdd,
unsigned long mode, void *cmd)
{
+ const char *boot_cmd = (const char *)cmd;
+
+ /*
+ * Verify if a "cmd" passed from the userspace program rebooting
+ * the system; if available, handle it.
+ * - For details, see the 'reboot' syscall in kernel/reboot.c
+ * - If the received "cmd" is not supported, use the default mode.
+ */
+ if (boot_cmd) {
+ if (boot_cmd[0] == 'h')
+ mode = (unsigned long)REBOOT_HARD;
+ else if (boot_cmd[0] == 's')
+ mode = (unsigned long)REBOOT_SOFT;
+ }
+
if (mode == (unsigned long)REBOOT_SOFT) {
/* Force match output active */
writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 5/6] arm: lpc32xx: phy3250 remove restart hook
2016-02-29 17:31 ` Sylvain Lemieux
@ 2016-02-29 17:31 ` Sylvain Lemieux
-1 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel, arnd, linux, manabian; +Cc: linux-watchdog, wim, stigge, vz
From: Sylvain Lemieux <slemieux@tycoint.com>
Remove the restart hook assignment from phy3250;
this functionality is now managed by
the pnx4008 watchdog driver.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Note:
This patch was generated with the option "--unified=2" to ensure
it can be apply before or after the changes for the new
LPC32xx irqchip driver:
- http://permalink.gmane.org/gmane.linux.drivers.devicetree/144683
Changes from v4 to v5:
- none.
Changes from v3 to v4:
- Switch patch #5 and #6 order.
Changes from v2 to v3:
- new patch in v3.
arch/arm/mach-lpc32xx/phy3250.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index a19071a..9e5c3db 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -211,4 +211,3 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
.init_machine = lpc3250_machine_init,
.dt_compat = lpc32xx_dt_compat,
- .restart = lpc23xx_restart,
MACHINE_END
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 5/6] arm: lpc32xx: phy3250 remove restart hook
@ 2016-02-29 17:31 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel
From: Sylvain Lemieux <slemieux@tycoint.com>
Remove the restart hook assignment from phy3250;
this functionality is now managed by
the pnx4008 watchdog driver.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Note:
This patch was generated with the option "--unified=2" to ensure
it can be apply before or after the changes for the new
LPC32xx irqchip driver:
- http://permalink.gmane.org/gmane.linux.drivers.devicetree/144683
Changes from v4 to v5:
- none.
Changes from v3 to v4:
- Switch patch #5 and #6 order.
Changes from v2 to v3:
- new patch in v3.
arch/arm/mach-lpc32xx/phy3250.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index a19071a..9e5c3db 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -211,4 +211,3 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
.init_machine = lpc3250_machine_init,
.dt_compat = lpc32xx_dt_compat,
- .restart = lpc23xx_restart,
MACHINE_END
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 6/6] arm: lpc32xx: remove restart handler
2016-02-29 17:31 ` Sylvain Lemieux
@ 2016-02-29 17:31 ` Sylvain Lemieux
-1 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel, arnd, linux, manabian; +Cc: linux-watchdog, wim, stigge, vz
From: Sylvain Lemieux <slemieux@tycoint.com>
Remove the restart handler from "mach-lpc32xx";
this functionality is now available in the
pnx4008 watchdog driver.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes from v4 to v5:
- none.
Changes from v3 to v4:
- Switch patch #5 and #6 order.
Changes from v2 to v3:
- move the change to "phy3250.c" into a separate patch.
Changes from v1 to v2:
- new patch in v2.
arch/arm/mach-lpc32xx/common.c | 15 ---------------
arch/arm/mach-lpc32xx/common.h | 1 -
2 files changed, 16 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 716e83e..5b7a1e7 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -194,21 +194,6 @@ void __init lpc32xx_map_io(void)
iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
}
-void lpc23xx_restart(enum reboot_mode mode, const char *cmd)
-{
- /* Make sure WDT clocks are enabled */
- __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
- LPC32XX_CLKPWR_TIMER_CLK_CTRL);
-
- /* Instant assert of RESETOUT_N with pulse length 1mS */
- __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
- __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
-
- /* Wait for watchdog to reset system */
- while (1)
- ;
-}
-
static int __init lpc32xx_check_uid(void)
{
u32 uid[4];
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 1cd8853..2d90801 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -30,7 +30,6 @@ extern void lpc32xx_timer_init(void);
extern void __init lpc32xx_init_irq(void);
extern void __init lpc32xx_map_io(void);
extern void __init lpc32xx_serial_init(void);
-extern void lpc23xx_restart(enum reboot_mode, const char *);
/*
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 6/6] arm: lpc32xx: remove restart handler
@ 2016-02-29 17:31 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-02-29 17:31 UTC (permalink / raw)
To: linux-arm-kernel
From: Sylvain Lemieux <slemieux@tycoint.com>
Remove the restart handler from "mach-lpc32xx";
this functionality is now available in the
pnx4008 watchdog driver.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes from v4 to v5:
- none.
Changes from v3 to v4:
- Switch patch #5 and #6 order.
Changes from v2 to v3:
- move the change to "phy3250.c" into a separate patch.
Changes from v1 to v2:
- new patch in v2.
arch/arm/mach-lpc32xx/common.c | 15 ---------------
arch/arm/mach-lpc32xx/common.h | 1 -
2 files changed, 16 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 716e83e..5b7a1e7 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -194,21 +194,6 @@ void __init lpc32xx_map_io(void)
iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
}
-void lpc23xx_restart(enum reboot_mode mode, const char *cmd)
-{
- /* Make sure WDT clocks are enabled */
- __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
- LPC32XX_CLKPWR_TIMER_CLK_CTRL);
-
- /* Instant assert of RESETOUT_N with pulse length 1mS */
- __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
- __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
-
- /* Wait for watchdog to reset system */
- while (1)
- ;
-}
-
static int __init lpc32xx_check_uid(void)
{
u32 uid[4];
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 1cd8853..2d90801 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -30,7 +30,6 @@ extern void lpc32xx_timer_init(void);
extern void __init lpc32xx_init_irq(void);
extern void __init lpc32xx_map_io(void);
extern void __init lpc32xx_serial_init(void);
-extern void lpc23xx_restart(enum reboot_mode, const char *);
/*
--
1.8.3.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset
2016-02-29 17:31 ` Sylvain Lemieux
@ 2016-03-01 4:03 ` Guenter Roeck
-1 siblings, 0 replies; 20+ messages in thread
From: Guenter Roeck @ 2016-03-01 4:03 UTC (permalink / raw)
To: Sylvain Lemieux, linux-arm-kernel, arnd, manabian
Cc: linux-watchdog, wim, stigge, vz
On 02/29/2016 09:31 AM, Sylvain Lemieux wrote:
> From: Sylvain Lemieux <slemieux@tycoint.com>
>
> Add support for explicit soft reset using the reboot mode.
>
> The default reboot mode behavior is unchanged;
> you can overwrite the default reboot type in the board specific file
> "DT_MACHINE_START" definition using the "reboot_mode" parameter.
>
> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
> ---
> Changes from v4 to v5:
> - no logical change; updated to work with new revision of patch #2.
>
> Changes from v3 to v4:
> - none.
>
> Changes from v2 to v3:
> - no logical change; updated to work with new revision of patch #2.
>
> Changes from v1 to v2:
> - Rename patch title;
> was "arm: lpc32xx: restart: add support for soft reset"
> - Add change to "pnx-4008" driver instead of "mach-lpc32xx".
> - Use define available in "pnx-4008" when writting to watchdog register.
>
> drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
> index f3be522..e05bfecf 100644
> --- a/drivers/watchdog/pnx4008_wdt.c
> +++ b/drivers/watchdog/pnx4008_wdt.c
> @@ -129,9 +129,16 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
> static int pnx4008_restart_handler(struct watchdog_device *wdd,
> unsigned long mode, void *cmd)
> {
> - /* Instant assert of RESETOUT_N with pulse length 1mS */
> - writel(13000, WDTIM_PULSE(wdt_base));
> - writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
> + if (mode == (unsigned long)REBOOT_SOFT) {
Are those typecasts really necessary ?
Guenter
> + /* Force match output active */
> + writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
> + /* Internal reset on match output (RESOUT_N not asserted) */
> + writel(M_RES1, WDTIM_MCTRL(wdt_base));
> + } else {
> + /* Instant assert of RESETOUT_N with pulse length 1mS */
> + writel(13000, WDTIM_PULSE(wdt_base));
> + writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
> + }
>
> /* Wait for watchdog to reset system */
> mdelay(1000);
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset
@ 2016-03-01 4:03 ` Guenter Roeck
0 siblings, 0 replies; 20+ messages in thread
From: Guenter Roeck @ 2016-03-01 4:03 UTC (permalink / raw)
To: linux-arm-kernel
On 02/29/2016 09:31 AM, Sylvain Lemieux wrote:
> From: Sylvain Lemieux <slemieux@tycoint.com>
>
> Add support for explicit soft reset using the reboot mode.
>
> The default reboot mode behavior is unchanged;
> you can overwrite the default reboot type in the board specific file
> "DT_MACHINE_START" definition using the "reboot_mode" parameter.
>
> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
> ---
> Changes from v4 to v5:
> - no logical change; updated to work with new revision of patch #2.
>
> Changes from v3 to v4:
> - none.
>
> Changes from v2 to v3:
> - no logical change; updated to work with new revision of patch #2.
>
> Changes from v1 to v2:
> - Rename patch title;
> was "arm: lpc32xx: restart: add support for soft reset"
> - Add change to "pnx-4008" driver instead of "mach-lpc32xx".
> - Use define available in "pnx-4008" when writting to watchdog register.
>
> drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
> index f3be522..e05bfecf 100644
> --- a/drivers/watchdog/pnx4008_wdt.c
> +++ b/drivers/watchdog/pnx4008_wdt.c
> @@ -129,9 +129,16 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
> static int pnx4008_restart_handler(struct watchdog_device *wdd,
> unsigned long mode, void *cmd)
> {
> - /* Instant assert of RESETOUT_N with pulse length 1mS */
> - writel(13000, WDTIM_PULSE(wdt_base));
> - writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
> + if (mode == (unsigned long)REBOOT_SOFT) {
Are those typecasts really necessary ?
Guenter
> + /* Force match output active */
> + writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
> + /* Internal reset on match output (RESOUT_N not asserted) */
> + writel(M_RES1, WDTIM_MCTRL(wdt_base));
> + } else {
> + /* Instant assert of RESETOUT_N with pulse length 1mS */
> + writel(13000, WDTIM_PULSE(wdt_base));
> + writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
> + }
>
> /* Wait for watchdog to reset system */
> mdelay(1000);
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset
2016-03-01 4:03 ` Guenter Roeck
@ 2016-03-01 16:04 ` Sylvain Lemieux
-1 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-03-01 16:04 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-arm-kernel, arnd, manabian, linux-watchdog, wim, stigge, vz
On Mon, 2016-02-29 at 20:03 -0800, Guenter Roeck wrote:
> On 02/29/2016 09:31 AM, Sylvain Lemieux wrote:
> > From: Sylvain Lemieux <slemieux@tycoint.com>
> >
> > Add support for explicit soft reset using the reboot mode.
> >
> > The default reboot mode behavior is unchanged;
> > you can overwrite the default reboot type in the board specific file
> > "DT_MACHINE_START" definition using the "reboot_mode" parameter.
> >
> > Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
> > ---
> > Changes from v4 to v5:
> > - no logical change; updated to work with new revision of patch #2.
> >
> > Changes from v3 to v4:
> > - none.
> >
> > Changes from v2 to v3:
> > - no logical change; updated to work with new revision of patch #2.
> >
> > Changes from v1 to v2:
> > - Rename patch title;
> > was "arm: lpc32xx: restart: add support for soft reset"
> > - Add change to "pnx-4008" driver instead of "mach-lpc32xx".
> > - Use define available in "pnx-4008" when writting to watchdog register.
> >
> > drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
> > index f3be522..e05bfecf 100644
> > --- a/drivers/watchdog/pnx4008_wdt.c
> > +++ b/drivers/watchdog/pnx4008_wdt.c
> > @@ -129,9 +129,16 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
> > static int pnx4008_restart_handler(struct watchdog_device *wdd,
> > unsigned long mode, void *cmd)
> > {
> > - /* Instant assert of RESETOUT_N with pulse length 1mS */
> > - writel(13000, WDTIM_PULSE(wdt_base));
> > - writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
> > + if (mode == (unsigned long)REBOOT_SOFT) {
>
> Are those typecasts really necessary ?
>
> Guenter
>
typecasts are optional; the compare occurred
between "unsigned long" & "enum reboot_mode" types.
Do you want me to remove them?
Sylvain
> > + /* Force match output active */
> > + writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
> > + /* Internal reset on match output (RESOUT_N not asserted) */
> > + writel(M_RES1, WDTIM_MCTRL(wdt_base));
> > + } else {
> > + /* Instant assert of RESETOUT_N with pulse length 1mS */
> > + writel(13000, WDTIM_PULSE(wdt_base));
> > + writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
> > + }
> >
> > /* Wait for watchdog to reset system */
> > mdelay(1000);
> >
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset
@ 2016-03-01 16:04 ` Sylvain Lemieux
0 siblings, 0 replies; 20+ messages in thread
From: Sylvain Lemieux @ 2016-03-01 16:04 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 2016-02-29 at 20:03 -0800, Guenter Roeck wrote:
> On 02/29/2016 09:31 AM, Sylvain Lemieux wrote:
> > From: Sylvain Lemieux <slemieux@tycoint.com>
> >
> > Add support for explicit soft reset using the reboot mode.
> >
> > The default reboot mode behavior is unchanged;
> > you can overwrite the default reboot type in the board specific file
> > "DT_MACHINE_START" definition using the "reboot_mode" parameter.
> >
> > Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
> > ---
> > Changes from v4 to v5:
> > - no logical change; updated to work with new revision of patch #2.
> >
> > Changes from v3 to v4:
> > - none.
> >
> > Changes from v2 to v3:
> > - no logical change; updated to work with new revision of patch #2.
> >
> > Changes from v1 to v2:
> > - Rename patch title;
> > was "arm: lpc32xx: restart: add support for soft reset"
> > - Add change to "pnx-4008" driver instead of "mach-lpc32xx".
> > - Use define available in "pnx-4008" when writting to watchdog register.
> >
> > drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
> > index f3be522..e05bfecf 100644
> > --- a/drivers/watchdog/pnx4008_wdt.c
> > +++ b/drivers/watchdog/pnx4008_wdt.c
> > @@ -129,9 +129,16 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
> > static int pnx4008_restart_handler(struct watchdog_device *wdd,
> > unsigned long mode, void *cmd)
> > {
> > - /* Instant assert of RESETOUT_N with pulse length 1mS */
> > - writel(13000, WDTIM_PULSE(wdt_base));
> > - writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
> > + if (mode == (unsigned long)REBOOT_SOFT) {
>
> Are those typecasts really necessary ?
>
> Guenter
>
typecasts are optional; the compare occurred
between "unsigned long" & "enum reboot_mode" types.
Do you want me to remove them?
Sylvain
> > + /* Force match output active */
> > + writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
> > + /* Internal reset on match output (RESOUT_N not asserted) */
> > + writel(M_RES1, WDTIM_MCTRL(wdt_base));
> > + } else {
> > + /* Instant assert of RESETOUT_N with pulse length 1mS */
> > + writel(13000, WDTIM_PULSE(wdt_base));
> > + writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
> > + }
> >
> > /* Wait for watchdog to reset system */
> > mdelay(1000);
> >
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset
2016-03-01 16:04 ` Sylvain Lemieux
@ 2016-03-03 4:52 ` Guenter Roeck
-1 siblings, 0 replies; 20+ messages in thread
From: Guenter Roeck @ 2016-03-03 4:52 UTC (permalink / raw)
To: Sylvain Lemieux
Cc: linux-arm-kernel, arnd, manabian, linux-watchdog, wim, stigge, vz
On 03/01/2016 08:04 AM, Sylvain Lemieux wrote:
> On Mon, 2016-02-29 at 20:03 -0800, Guenter Roeck wrote:
>> On 02/29/2016 09:31 AM, Sylvain Lemieux wrote:
>>> From: Sylvain Lemieux <slemieux@tycoint.com>
>>>
>>> Add support for explicit soft reset using the reboot mode.
>>>
>>> The default reboot mode behavior is unchanged;
>>> you can overwrite the default reboot type in the board specific file
>>> "DT_MACHINE_START" definition using the "reboot_mode" parameter.
>>>
>>> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
>>> ---
>>> Changes from v4 to v5:
>>> - no logical change; updated to work with new revision of patch #2.
>>>
>>> Changes from v3 to v4:
>>> - none.
>>>
>>> Changes from v2 to v3:
>>> - no logical change; updated to work with new revision of patch #2.
>>>
>>> Changes from v1 to v2:
>>> - Rename patch title;
>>> was "arm: lpc32xx: restart: add support for soft reset"
>>> - Add change to "pnx-4008" driver instead of "mach-lpc32xx".
>>> - Use define available in "pnx-4008" when writting to watchdog register.
>>>
>>> drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
>>> 1 file changed, 10 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
>>> index f3be522..e05bfecf 100644
>>> --- a/drivers/watchdog/pnx4008_wdt.c
>>> +++ b/drivers/watchdog/pnx4008_wdt.c
>>> @@ -129,9 +129,16 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
>>> static int pnx4008_restart_handler(struct watchdog_device *wdd,
>>> unsigned long mode, void *cmd)
>>> {
>>> - /* Instant assert of RESETOUT_N with pulse length 1mS */
>>> - writel(13000, WDTIM_PULSE(wdt_base));
>>> - writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
>>> + if (mode == (unsigned long)REBOOT_SOFT) {
>>
>> Are those typecasts really necessary ?
>>
>> Guenter
>>
> typecasts are optional; the compare occurred
> between "unsigned long" & "enum reboot_mode" types.
>
> Do you want me to remove them?
>
If they are not needed, they should not be there. Cluttering the core
with unnecessary typecasts only makes it harder to read.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset
@ 2016-03-03 4:52 ` Guenter Roeck
0 siblings, 0 replies; 20+ messages in thread
From: Guenter Roeck @ 2016-03-03 4:52 UTC (permalink / raw)
To: linux-arm-kernel
On 03/01/2016 08:04 AM, Sylvain Lemieux wrote:
> On Mon, 2016-02-29 at 20:03 -0800, Guenter Roeck wrote:
>> On 02/29/2016 09:31 AM, Sylvain Lemieux wrote:
>>> From: Sylvain Lemieux <slemieux@tycoint.com>
>>>
>>> Add support for explicit soft reset using the reboot mode.
>>>
>>> The default reboot mode behavior is unchanged;
>>> you can overwrite the default reboot type in the board specific file
>>> "DT_MACHINE_START" definition using the "reboot_mode" parameter.
>>>
>>> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
>>> ---
>>> Changes from v4 to v5:
>>> - no logical change; updated to work with new revision of patch #2.
>>>
>>> Changes from v3 to v4:
>>> - none.
>>>
>>> Changes from v2 to v3:
>>> - no logical change; updated to work with new revision of patch #2.
>>>
>>> Changes from v1 to v2:
>>> - Rename patch title;
>>> was "arm: lpc32xx: restart: add support for soft reset"
>>> - Add change to "pnx-4008" driver instead of "mach-lpc32xx".
>>> - Use define available in "pnx-4008" when writting to watchdog register.
>>>
>>> drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
>>> 1 file changed, 10 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
>>> index f3be522..e05bfecf 100644
>>> --- a/drivers/watchdog/pnx4008_wdt.c
>>> +++ b/drivers/watchdog/pnx4008_wdt.c
>>> @@ -129,9 +129,16 @@ static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
>>> static int pnx4008_restart_handler(struct watchdog_device *wdd,
>>> unsigned long mode, void *cmd)
>>> {
>>> - /* Instant assert of RESETOUT_N with pulse length 1mS */
>>> - writel(13000, WDTIM_PULSE(wdt_base));
>>> - writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
>>> + if (mode == (unsigned long)REBOOT_SOFT) {
>>
>> Are those typecasts really necessary ?
>>
>> Guenter
>>
> typecasts are optional; the compare occurred
> between "unsigned long" & "enum reboot_mode" types.
>
> Do you want me to remove them?
>
If they are not needed, they should not be there. Cluttering the core
with unnecessary typecasts only makes it harder to read.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2016-03-03 4:52 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-02-29 17:31 [PATCH v5 0/6] watchdog: pnx4008: add restart handler Sylvain Lemieux
2016-02-29 17:31 ` Sylvain Lemieux
2016-02-29 17:31 ` [PATCH v5 1/6] watchdog: pnx4008: update logging during power-on Sylvain Lemieux
2016-02-29 17:31 ` Sylvain Lemieux
2016-02-29 17:31 ` [PATCH v5 2/6] watchdog: pnx4008: add restart handler Sylvain Lemieux
2016-02-29 17:31 ` Sylvain Lemieux
2016-02-29 17:31 ` [PATCH v5 3/6] watchdog: pnx4008: add support for soft reset Sylvain Lemieux
2016-02-29 17:31 ` Sylvain Lemieux
2016-03-01 4:03 ` Guenter Roeck
2016-03-01 4:03 ` Guenter Roeck
2016-03-01 16:04 ` Sylvain Lemieux
2016-03-01 16:04 ` Sylvain Lemieux
2016-03-03 4:52 ` Guenter Roeck
2016-03-03 4:52 ` Guenter Roeck
2016-02-29 17:31 ` [PATCH v5 4/6] watchdog: pnx4008: restart: support "cmd" from userspace Sylvain Lemieux
2016-02-29 17:31 ` Sylvain Lemieux
2016-02-29 17:31 ` [PATCH v5 5/6] arm: lpc32xx: phy3250 remove restart hook Sylvain Lemieux
2016-02-29 17:31 ` Sylvain Lemieux
2016-02-29 17:31 ` [PATCH v5 6/6] arm: lpc32xx: remove restart handler Sylvain Lemieux
2016-02-29 17:31 ` Sylvain Lemieux
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.