[U-Boot] [PATCH v4 0/4] Make usb device-tree fixup independent of USB controller

[U-Boot] [PATCH v4 0/4] Make usb device-tree fixup independent of USB controller

[Sriram Dash]

Makes usb device-tree fixup independent of Controller type. This enables the
usage of device-tree fixup as a common framework for EHCI and XHCI controllers

Sriram Dash (4):
  drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to
    common file
  drivers:usb:common:fsl-dt-fixup: Remove code duplication for
    fdt_usb_get_node_type
  drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for
    xhci controller
  drivers:usb:common:fsl-dt-fixup: fix fdt_usb_get_node_type() to return
    error code

 Makefile                          |   1 +
 drivers/usb/common/Makefile       |   7 ++
 drivers/usb/common/fsl-dt-fixup.c | 205 ++++++++++++++++++++++++++++++++++++++
 drivers/usb/host/ehci-fsl.c       | 195 ------------------------------------
 include/fdt_support.h             |   4 +-
 5 files changed, 215 insertions(+), 197 deletions(-)
 create mode 100644 drivers/usb/common/Makefile
 create mode 100644 drivers/usb/common/fsl-dt-fixup.c

-- 
2.1.0

[U-Boot] [PATCH v4 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file

[Sriram Dash]

Move usb device-tree fixup framework from ehci-fsl.c to common place so
that it can be used by other drivers as well (xhci-fsl.c).

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
---
Changes in v4:
  - Retain copywrite info
  - Remove #include from fsl-dt-fixup.c which are not used currently.
Changes in v3:
  - git commit -M -C to generate patches
  - Break the patch 1(Moving dt fix up and removing code duplication) into 2 patches
Changes in v2:
  - Remove the #defines from the patch

 Makefile                                           |   1 +
 drivers/usb/common/Makefile                        |   6 +
 .../usb/{host/ehci-fsl.c => common/fsl-dt-fixup.c} | 157 -----------------
 drivers/usb/host/ehci-fsl.c                        | 195 ---------------------
 4 files changed, 7 insertions(+), 352 deletions(-)
 create mode 100644 drivers/usb/common/Makefile
 copy drivers/usb/{host/ehci-fsl.c => common/fsl-dt-fixup.c} (54%)

diff --git a/Makefile b/Makefile
index fadf1a3..40ead3d 100644
--- a/Makefile
+++ b/Makefile
@@ -648,6 +648,7 @@ libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
 libs-y += drivers/serial/
 libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/common/
 libs-y += drivers/usb/emul/
 libs-y += drivers/usb/eth/
 libs-y += drivers/usb/gadget/
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
new file mode 100644
index 0000000..a38ee4a
--- /dev/null
+++ b/drivers/usb/common/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/common/fsl-dt-fixup.c
similarity index 54%
copy from drivers/usb/host/ehci-fsl.c
copy to drivers/usb/common/fsl-dt-fixup.c
index 97b7f14..92adb46 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/common/fsl-dt-fixup.c
@@ -9,172 +9,16 @@
  */
 
 #include <common.h>
-#include <pci.h>
 #include <usb.h>
 #include <asm/io.h>
-#include <usb/ehci-fsl.h>
 #include <hwconfig.h>
 #include <fsl_usb.h>
 #include <fdt_support.h>
 
-#include "ehci.h"
-
 #ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 #endif
 
-static void set_txfifothresh(struct usb_ehci *, u32);
-
-/* Check USB PHY clock valid */
-static int usb_phy_clk_valid(struct usb_ehci *ehci)
-{
-	if (!((in_be32(&ehci->control) & PHY_CLK_VALID) ||
-			in_be32(&ehci->prictrl))) {
-		printf("USB PHY clock invalid!\n");
-		return 0;
-	} else {
-		return 1;
-	}
-}
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- *
- * Excerpts from linux ehci fsl driver.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	struct usb_ehci *ehci = NULL;
-	const char *phy_type = NULL;
-	size_t len;
-	char current_usb_controller[5];
-#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-	char usb_phy[5];
-
-	usb_phy[0] = '\0';
-#endif
-	if (has_erratum_a007075()) {
-		/*
-		 * A 5ms delay is needed after applying soft-reset to the
-		 * controller to let external ULPI phy come out of reset.
-		 * This delay needs to be added before re-initializing
-		 * the controller after soft-resetting completes
-		 */
-		mdelay(5);
-	}
-	memset(current_usb_controller, '\0', 5);
-	snprintf(current_usb_controller, 4, "usb%d", index+1);
-
-	switch (index) {
-	case 0:
-		ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
-		break;
-	case 1:
-		ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB2_ADDR;
-		break;
-	default:
-		printf("ERROR: wrong controller index!!\n");
-		return -EINVAL;
-	};
-
-	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
-	*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
-			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	/* Set to Host mode */
-	setbits_le32(&ehci->usbmode, CM_HOST);
-
-	out_be32(&ehci->snoop1, SNOOP_SIZE_2GB);
-	out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
-
-	/* Init phy */
-	if (hwconfig_sub(current_usb_controller, "phy_type"))
-		phy_type = hwconfig_subarg(current_usb_controller,
-				"phy_type", &len);
-	else
-		phy_type = getenv("usb_phy_type");
-
-	if (!phy_type) {
-#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-		/* if none specified assume internal UTMI */
-		strcpy(usb_phy, "utmi");
-		phy_type = usb_phy;
-#else
-		printf("WARNING: USB phy type not defined !!\n");
-		return -1;
-#endif
-	}
-
-	if (!strncmp(phy_type, "utmi", 4)) {
-#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
-		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
-				PHY_CLK_SEL_UTMI);
-		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
-				UTMI_PHY_EN);
-		udelay(1000); /* delay required for PHY Clk to appear */
-#endif
-		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
-		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
-				USB_EN);
-	} else {
-		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
-				PHY_CLK_SEL_ULPI);
-		clrsetbits_be32(&ehci->control, UTMI_PHY_EN |
-				CONTROL_REGISTER_W1C_MASK, USB_EN);
-		udelay(1000); /* delay required for PHY Clk to appear */
-		if (!usb_phy_clk_valid(ehci))
-			return -EINVAL;
-		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
-	}
-
-	out_be32(&ehci->prictrl, 0x0000000c);
-	out_be32(&ehci->age_cnt_limit, 0x00000040);
-	out_be32(&ehci->sictrl, 0x00000001);
-
-	in_le32(&ehci->usbmode);
-
-	if (has_erratum_a007798())
-		set_txfifothresh(ehci, TXFIFOTHRESH);
-
-	if (has_erratum_a004477()) {
-		/*
-		 * When reset is issued while any ULPI transaction is ongoing
-		 * then it may result to corruption of ULPI Function Control
-		 * Register which eventually causes phy clock to enter low
-		 * power mode which stops the clock. Thus delay is required
-		 * before reset to let ongoing ULPI transaction complete.
-		 */
-		udelay(1);
-	}
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
-	return 0;
-}
-
-/*
- * Setting the value of TXFIFO_THRESH field in TXFILLTUNING register
- * to counter DDR latencies in writing data into Tx buffer.
- * This prevents Tx buffer from getting underrun
- */
-static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh)
-{
-	u32 cmd;
-	cmd = ehci_readl(&ehci->txfilltuning);
-	cmd &= ~TXFIFO_THRESH_MASK;
-	cmd |= TXFIFO_THRESH(txfifo_thresh);
-	ehci_writel(&ehci->txfilltuning, cmd);
-}
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
 				       const char *phy_type, int start_offset)
 {
@@ -367,4 +211,3 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 		}
 	}
 }
-#endif
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 97b7f14..ec6b8fe 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -173,198 +173,3 @@ static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh)
 	cmd |= TXFIFO_THRESH(txfifo_thresh);
 	ehci_writel(&ehci->txfilltuning, cmd);
 }
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
-				       const char *phy_type, int start_offset)
-{
-	const char *compat_dr = "fsl-usb2-dr";
-	const char *compat_mph = "fsl-usb2-mph";
-	const char *prop_mode = "dr_mode";
-	const char *prop_type = "phy_type";
-	const char *node_type = NULL;
-	int node_offset;
-	int err;
-
-	node_offset = fdt_node_offset_by_compatible(blob,
-						    start_offset, compat_mph);
-	if (node_offset < 0) {
-		node_offset = fdt_node_offset_by_compatible(blob,
-							    start_offset,
-							    compat_dr);
-		if (node_offset < 0) {
-			printf("WARNING: could not find compatible node: %s",
-			       fdt_strerror(node_offset));
-			return -1;
-		}
-		node_type = compat_dr;
-	} else {
-		node_type = compat_mph;
-	}
-
-	if (mode) {
-		err = fdt_setprop(blob, node_offset, prop_mode, mode,
-				  strlen(mode) + 1);
-		if (err < 0)
-			printf("WARNING: could not set %s for %s: %s.\n",
-			       prop_mode, node_type, fdt_strerror(err));
-	}
-
-	if (phy_type) {
-		err = fdt_setprop(blob, node_offset, prop_type, phy_type,
-				  strlen(phy_type) + 1);
-		if (err < 0)
-			printf("WARNING: could not set %s for %s: %s.\n",
-			       prop_type, node_type, fdt_strerror(err));
-	}
-
-	return node_offset;
-}
-
-static const char *fdt_usb_get_node_type(void *blob, int start_offset,
-					 int *node_offset)
-{
-	const char *compat_dr = "fsl-usb2-dr";
-	const char *compat_mph = "fsl-usb2-mph";
-	const char *node_type = NULL;
-
-	*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
-						     compat_mph);
-	if (*node_offset < 0) {
-		*node_offset = fdt_node_offset_by_compatible(blob,
-							     start_offset,
-							     compat_dr);
-		if (*node_offset < 0) {
-			printf("ERROR: could not find compatible node: %s\n",
-			       fdt_strerror(*node_offset));
-		} else {
-			node_type = compat_dr;
-		}
-	} else {
-		node_type = compat_mph;
-	}
-
-	return node_type;
-}
-
-static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
-				 int start_offset)
-{
-	int node_offset, err;
-	const char *node_type = NULL;
-
-	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
-	if (!node_type)
-		return -1;
-
-	err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
-	if (err < 0) {
-		printf("ERROR: could not set %s for %s: %s.\n",
-		       prop_erratum, node_type, fdt_strerror(err));
-	}
-
-	return node_offset;
-}
-
-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-{
-	static const char * const modes[] = { "host", "peripheral", "otg" };
-	static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" };
-	int usb_erratum_a006261_off = -1;
-	int usb_erratum_a007075_off = -1;
-	int usb_erratum_a007792_off = -1;
-	int usb_erratum_a005697_off = -1;
-	int usb_mode_off = -1;
-	int usb_phy_off = -1;
-	char str[5];
-	int i, j;
-
-	for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
-		const char *dr_mode_type = NULL;
-		const char *dr_phy_type = NULL;
-		int mode_idx = -1, phy_idx = -1;
-
-		snprintf(str, 5, "%s%d", "usb", i);
-		if (hwconfig(str)) {
-			for (j = 0; j < ARRAY_SIZE(modes); j++) {
-				if (hwconfig_subarg_cmp(str, "dr_mode",
-							modes[j])) {
-					mode_idx = j;
-					break;
-				}
-			}
-
-			for (j = 0; j < ARRAY_SIZE(phys); j++) {
-				if (hwconfig_subarg_cmp(str, "phy_type",
-							phys[j])) {
-					phy_idx = j;
-					break;
-				}
-			}
-
-			if (mode_idx < 0 && phy_idx < 0) {
-				printf("WARNING: invalid phy or mode\n");
-				return;
-			}
-
-			if (mode_idx > -1)
-				dr_mode_type = modes[mode_idx];
-
-			if (phy_idx > -1)
-				dr_phy_type = phys[phy_idx];
-		}
-
-		if (has_dual_phy())
-			dr_phy_type = phys[2];
-
-		usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
-							   dr_mode_type, NULL,
-							   usb_mode_off);
-
-		if (usb_mode_off < 0)
-			return;
-
-		usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
-							  NULL, dr_phy_type,
-							  usb_phy_off);
-
-		if (usb_phy_off < 0)
-			return;
-
-		if (has_erratum_a006261()) {
-			usb_erratum_a006261_off =  fdt_fixup_usb_erratum
-						   (blob,
-						    "fsl,usb-erratum-a006261",
-						    usb_erratum_a006261_off);
-			if (usb_erratum_a006261_off < 0)
-				return;
-		}
-
-		if (has_erratum_a007075()) {
-			usb_erratum_a007075_off =  fdt_fixup_usb_erratum
-						   (blob,
-						    "fsl,usb-erratum-a007075",
-						    usb_erratum_a007075_off);
-			if (usb_erratum_a007075_off < 0)
-				return;
-		}
-
-		if (has_erratum_a007792()) {
-			usb_erratum_a007792_off =  fdt_fixup_usb_erratum
-						   (blob,
-						    "fsl,usb-erratum-a007792",
-						    usb_erratum_a007792_off);
-			if (usb_erratum_a007792_off < 0)
-				return;
-		}
-		if (has_erratum_a005697()) {
-			usb_erratum_a005697_off =  fdt_fixup_usb_erratum
-						   (blob,
-						    "fsl,usb-erratum-a005697",
-						    usb_erratum_a005697_off);
-			if (usb_erratum_a005697_off < 0)
-				return;
-		}
-	}
-}
-#endif
-- 
2.1.0

[U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type

[Sriram Dash]

Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to
avoid code duplication.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
Changes in v4:
  - Make minimal modification to code
Changes in v3:
  - Move the duplication of code to new patch

 drivers/usb/common/fsl-dt-fixup.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
index 92adb46..64e20d8 100644
--- a/drivers/usb/common/fsl-dt-fixup.c
+++ b/drivers/usb/common/fsl-dt-fixup.c
@@ -19,32 +19,21 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 #endif
 
+static const char *fdt_usb_get_node_type(void *blob, int start_offset,
+					 int *node_offset);
+
 static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
 				       const char *phy_type, int start_offset)
 {
-	const char *compat_dr = "fsl-usb2-dr";
-	const char *compat_mph = "fsl-usb2-mph";
 	const char *prop_mode = "dr_mode";
 	const char *prop_type = "phy_type";
 	const char *node_type = NULL;
 	int node_offset;
 	int err;
 
-	node_offset = fdt_node_offset_by_compatible(blob,
-						    start_offset, compat_mph);
-	if (node_offset < 0) {
-		node_offset = fdt_node_offset_by_compatible(blob,
-							    start_offset,
-							    compat_dr);
-		if (node_offset < 0) {
-			printf("WARNING: could not find compatible node: %s",
-			       fdt_strerror(node_offset));
-			return -1;
-		}
-		node_type = compat_dr;
-	} else {
-		node_type = compat_mph;
-	}
+	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
+	if (!node_type)
+		return -1;
 
 	if (mode) {
 		err = fdt_setprop(blob, node_offset, prop_mode, mode,
-- 
2.1.0

[U-Boot] [PATCH v4 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller

[Sriram Dash]

Enables usb device-tree fixup code to incorporate xhci controller

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
---
Changes in v4:
  - Use a terminating entry in the array for getting node type for controller
Changes in v3:
  - Modify the Makefile to remove comparison
  - Put the supported controllers in array and checking from array
Changes in v2:
  - Remove the #defines from the patch and adding controller support

 drivers/usb/common/Makefile       |  1 +
 drivers/usb/common/fsl-dt-fixup.c | 44 +++++++++++++++++++--------------------
 include/fdt_support.h             |  4 ++--
 3 files changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
index a38ee4a..2f3d43d 100644
--- a/drivers/usb/common/Makefile
+++ b/drivers/usb/common/Makefile
@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o
+obj-$(CONFIG_USB_XHCI_FSL) += fsl-dt-fixup.o
diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
index 64e20d8..b574127 100644
--- a/drivers/usb/common/fsl-dt-fixup.c
+++ b/drivers/usb/common/fsl-dt-fixup.c
@@ -19,15 +19,21 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 #endif
 
-static const char *fdt_usb_get_node_type(void *blob, int start_offset,
+static char *fdt_usb_get_node_type(void *blob, int start_offset,
 					 int *node_offset);
 
+char compat_usb_fsl[] = {
+	"fsl-usb2-mph" "\0"
+	"fsl-usb2-dr" "\0"
+	"snps,dwc3" "\0"
+};
+
 static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
 				       const char *phy_type, int start_offset)
 {
 	const char *prop_mode = "dr_mode";
 	const char *prop_type = "phy_type";
-	const char *node_type = NULL;
+	char *node_type = NULL;
 	int node_offset;
 	int err;
 
@@ -54,29 +60,23 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
 	return node_offset;
 }
 
-static const char *fdt_usb_get_node_type(void *blob, int start_offset,
+static char *fdt_usb_get_node_type(void *blob, int start_offset,
 					 int *node_offset)
 {
-	const char *compat_dr = "fsl-usb2-dr";
-	const char *compat_mph = "fsl-usb2-mph";
-	const char *node_type = NULL;
-
-	*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
-						     compat_mph);
-	if (*node_offset < 0) {
-		*node_offset = fdt_node_offset_by_compatible(blob,
-							     start_offset,
-							     compat_dr);
-		if (*node_offset < 0) {
-			printf("ERROR: could not find compatible node: %s\n",
-			       fdt_strerror(*node_offset));
-		} else {
-			node_type = compat_dr;
+	char *node_type = NULL;
+	char *node_name, *nxt;
+
+	for (node_name = compat_usb_fsl; *node_name; node_name = nxt + 1) {
+		nxt = node_name;
+		while (*nxt)
+			++nxt;
+		*node_offset = fdt_node_offset_by_compatible
+			       (blob, start_offset, node_name);
+		if (*node_offset >= 0) {
+			node_type = node_name;
+			break;
 		}
-	} else {
-		node_type = compat_mph;
 	}
-
 	return node_type;
 }
 
@@ -84,7 +84,7 @@ static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
 				 int start_offset)
 {
 	int node_offset, err;
-	const char *node_type = NULL;
+	char *node_type = NULL;
 
 	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
 	if (!node_type)
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 296add0..d34e959 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -113,11 +113,11 @@ void fdt_fixup_qe_firmware(void *fdt);
  */
 int fdt_fixup_display(void *blob, const char *path, const char *display);
 
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
 void fdt_fixup_dr_usb(void *blob, bd_t *bd);
 #else
 static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
+#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
 
 #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
 void fdt_fixup_crypto_node(void *blob, int sec_rev);
-- 
2.1.0

[U-Boot] [PATCH v4 4/4] drivers:usb:common:fsl-dt-fixup: fix fdt_usb_get_node_type() to return error code

[Sriram Dash]

fdt_usb_get_node_type() to return error code instead of pointer.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 drivers/usb/common/fsl-dt-fixup.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
index b574127..f7137e4 100644
--- a/drivers/usb/common/fsl-dt-fixup.c
+++ b/drivers/usb/common/fsl-dt-fixup.c
@@ -19,8 +19,8 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 #endif
 
-static char *fdt_usb_get_node_type(void *blob, int start_offset,
-					 int *node_offset);
+static int fdt_usb_get_node_type(void *blob, int start_offset,
+				 int *node_offset, char **node_type);
 
 char compat_usb_fsl[] = {
 	"fsl-usb2-mph" "\0"
@@ -37,8 +37,9 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
 	int node_offset;
 	int err;
 
-	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
-	if (!node_type)
+	err = fdt_usb_get_node_type(blob, start_offset,
+				    &node_offset, &node_type);
+	if (err < 0)
 		return -1;
 
 	if (mode) {
@@ -60,11 +61,11 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
 	return node_offset;
 }
 
-static char *fdt_usb_get_node_type(void *blob, int start_offset,
-					 int *node_offset)
+static int fdt_usb_get_node_type(void *blob, int start_offset,
+				 int *node_offset, char **node_type)
 {
-	char *node_type = NULL;
 	char *node_name, *nxt;
+	int ret = -1;
 
 	for (node_name = compat_usb_fsl; *node_name; node_name = nxt + 1) {
 		nxt = node_name;
@@ -73,11 +74,12 @@ static char *fdt_usb_get_node_type(void *blob, int start_offset,
 		*node_offset = fdt_node_offset_by_compatible
 			       (blob, start_offset, node_name);
 		if (*node_offset >= 0) {
-			node_type = node_name;
+			*node_type = node_name;
+			ret = 0;
 			break;
 		}
 	}
-	return node_type;
+	return ret;
 }
 
 static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
@@ -86,8 +88,9 @@ static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
 	int node_offset, err;
 	char *node_type = NULL;
 
-	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
-	if (!node_type)
+	err = fdt_usb_get_node_type(blob, start_offset,
+				    &node_offset, &node_type);
+	if (err < 0)
 		return -1;
 
 	err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
-- 
2.1.0

[U-Boot] [PATCH v4 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file

[Marek Vasut]

On 03/11/2016 07:26 AM, Sriram Dash wrote:
> Move usb device-tree fixup framework from ehci-fsl.c to common place so
> that it can be used by other drivers as well (xhci-fsl.c).
> 
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> ---
> Changes in v4:
>   - Retain copywrite info
>   - Remove #include from fsl-dt-fixup.c which are not used currently.
> Changes in v3:
>   - git commit -M -C to generate patches
>   - Break the patch 1(Moving dt fix up and removing code duplication) into 2 patches
> Changes in v2:
>   - Remove the #defines from the patch
> 

It's "copyright", not copywrite. Other than that:

Acked-by: Marek Vasut <marex@denx.de>

-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type

[Marek Vasut]

On 03/11/2016 07:26 AM, Sriram Dash wrote:
> Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to
> avoid code duplication.
> 
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> ---
> Changes in v4:
>   - Make minimal modification to code
> Changes in v3:
>   - Move the duplication of code to new patch
> 
>  drivers/usb/common/fsl-dt-fixup.c | 23 ++++++-----------------
>  1 file changed, 6 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
> index 92adb46..64e20d8 100644
> --- a/drivers/usb/common/fsl-dt-fixup.c
> +++ b/drivers/usb/common/fsl-dt-fixup.c
> @@ -19,32 +19,21 @@
>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
>  #endif
>  
> +static const char *fdt_usb_get_node_type(void *blob, int start_offset,
> +					 int *node_offset);
> +

Why do you need this forward declaration ?

>  static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>  				       const char *phy_type, int start_offset)
>  {
> -	const char *compat_dr = "fsl-usb2-dr";
> -	const char *compat_mph = "fsl-usb2-mph";
>  	const char *prop_mode = "dr_mode";
>  	const char *prop_type = "phy_type";
>  	const char *node_type = NULL;
>  	int node_offset;
>  	int err;
>  
> -	node_offset = fdt_node_offset_by_compatible(blob,
> -						    start_offset, compat_mph);
> -	if (node_offset < 0) {
> -		node_offset = fdt_node_offset_by_compatible(blob,
> -							    start_offset,
> -							    compat_dr);
> -		if (node_offset < 0) {
> -			printf("WARNING: could not find compatible node: %s",
> -			       fdt_strerror(node_offset));
> -			return -1;
> -		}
> -		node_type = compat_dr;
> -	} else {
> -		node_type = compat_mph;
> -	}
> +	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
> +	if (!node_type)
> +		return -1;
>  
>  	if (mode) {
>  		err = fdt_setprop(blob, node_offset, prop_mode, mode,
> 


-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v4 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller

[Marek Vasut]

On 03/11/2016 07:26 AM, Sriram Dash wrote:
> Enables usb device-tree fixup code to incorporate xhci controller
> 
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> ---
> Changes in v4:
>   - Use a terminating entry in the array for getting node type for controller
> Changes in v3:
>   - Modify the Makefile to remove comparison
>   - Put the supported controllers in array and checking from array
> Changes in v2:
>   - Remove the #defines from the patch and adding controller support
> 
>  drivers/usb/common/Makefile       |  1 +
>  drivers/usb/common/fsl-dt-fixup.c | 44 +++++++++++++++++++--------------------
>  include/fdt_support.h             |  4 ++--
>  3 files changed, 25 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
> index a38ee4a..2f3d43d 100644
> --- a/drivers/usb/common/Makefile
> +++ b/drivers/usb/common/Makefile
> @@ -4,3 +4,4 @@
>  #
>  
>  obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o
> +obj-$(CONFIG_USB_XHCI_FSL) += fsl-dt-fixup.o
> diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
> index 64e20d8..b574127 100644
> --- a/drivers/usb/common/fsl-dt-fixup.c
> +++ b/drivers/usb/common/fsl-dt-fixup.c
> @@ -19,15 +19,21 @@
>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
>  #endif
>  
> -static const char *fdt_usb_get_node_type(void *blob, int start_offset,
> +static char *fdt_usb_get_node_type(void *blob, int start_offset,
>  					 int *node_offset);
>  
> +char compat_usb_fsl[] = {

static const

> +	"fsl-usb2-mph" "\0"
> +	"fsl-usb2-dr" "\0"
> +	"snps,dwc3" "\0"
> +};
> +
>  static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>  				       const char *phy_type, int start_offset)
>  {
>  	const char *prop_mode = "dr_mode";
>  	const char *prop_type = "phy_type";
> -	const char *node_type = NULL;
> +	char *node_type = NULL;
>  	int node_offset;
>  	int err;
>  
> @@ -54,29 +60,23 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>  	return node_offset;
>  }
[...]


-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v4 4/4] drivers:usb:common:fsl-dt-fixup: fix fdt_usb_get_node_type() to return error code

[Marek Vasut]

On 03/11/2016 07:26 AM, Sriram Dash wrote:
> fdt_usb_get_node_type() to return error code instead of pointer.

This sentence makes no sense.

> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> ---
>  drivers/usb/common/fsl-dt-fixup.c | 25 ++++++++++++++-----------
>  1 file changed, 14 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
> index b574127..f7137e4 100644
> --- a/drivers/usb/common/fsl-dt-fixup.c
> +++ b/drivers/usb/common/fsl-dt-fixup.c
> @@ -19,8 +19,8 @@
>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
>  #endif
>  
> -static char *fdt_usb_get_node_type(void *blob, int start_offset,
> -					 int *node_offset);
> +static int fdt_usb_get_node_type(void *blob, int start_offset,
> +				 int *node_offset, char **node_type);
>  
>  char compat_usb_fsl[] = {
>  	"fsl-usb2-mph" "\0"
> @@ -37,8 +37,9 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>  	int node_offset;
>  	int err;
>  
> -	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
> -	if (!node_type)
> +	err = fdt_usb_get_node_type(blob, start_offset,
> +				    &node_offset, &node_type);
> +	if (err < 0)
>  		return -1;
>  
>  	if (mode) {
> @@ -60,11 +61,11 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>  	return node_offset;
>  }
>  
> -static char *fdt_usb_get_node_type(void *blob, int start_offset,
> -					 int *node_offset)
> +static int fdt_usb_get_node_type(void *blob, int start_offset,
> +				 int *node_offset, char **node_type)
>  {
> -	char *node_type = NULL;
>  	char *node_name, *nxt;
> +	int ret = -1;

You might as well start using errno.h

>  	for (node_name = compat_usb_fsl; *node_name; node_name = nxt + 1) {
>  		nxt = node_name;
> @@ -73,11 +74,12 @@ static char *fdt_usb_get_node_type(void *blob, int start_offset,
>  		*node_offset = fdt_node_offset_by_compatible
>  			       (blob, start_offset, node_name);
>  		if (*node_offset >= 0) {
> -			node_type = node_name;
> +			*node_type = node_name;
> +			ret = 0;
>  			break;
>  		}
>  	}
> -	return node_type;
> +	return ret;
>  }
>  
>  static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
> @@ -86,8 +88,9 @@ static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
>  	int node_offset, err;
>  	char *node_type = NULL;
>  
> -	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
> -	if (!node_type)
> +	err = fdt_usb_get_node_type(blob, start_offset,
> +				    &node_offset, &node_type);
> +	if (err < 0)
>  		return -1;
>  
>  	err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
> 

The patch is fine otherwise.

-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type

[Sriram Dash]

>-----Original Message-----
>From: Marek Vasut [mailto:marex at denx.de]
>Sent: Friday, March 11, 2016 10:14 PM
>To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
><ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code
>duplication for fdt_usb_get_node_type
>
>On 03/11/2016 07:26 AM, Sriram Dash wrote:
>> Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to
>> avoid code duplication.
>>
>> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
>> ---
>> Changes in v4:
>>   - Make minimal modification to code
>> Changes in v3:
>>   - Move the duplication of code to new patch
>>
>>  drivers/usb/common/fsl-dt-fixup.c | 23 ++++++-----------------
>>  1 file changed, 6 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/usb/common/fsl-dt-fixup.c
>> b/drivers/usb/common/fsl-dt-fixup.c
>> index 92adb46..64e20d8 100644
>> --- a/drivers/usb/common/fsl-dt-fixup.c
>> +++ b/drivers/usb/common/fsl-dt-fixup.c
>> @@ -19,32 +19,21 @@
>>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1  #endif
>>
>> +static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>> +					 int *node_offset);
>> +
>
>Why do you need this forward declaration ?
>

The forwarded declaration is needed as the function " fdt_usb_get_node_type " is used in " fdt_fixup_usb_mode_phy_type " but defined below " fdt_fixup_usb_mode_phy_type ".

This was done to avoid the confusion created due to git diff, while moving the " fdt_usb_get_node_type " above  " fdt_fixup_usb_mode_phy_type", in v3.

>>  static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>>  				       const char *phy_type, int start_offset)  {
>> -	const char *compat_dr = "fsl-usb2-dr";
>> -	const char *compat_mph = "fsl-usb2-mph";
>>  	const char *prop_mode = "dr_mode";
>>  	const char *prop_type = "phy_type";
>>  	const char *node_type = NULL;
>>  	int node_offset;
>>  	int err;
>>
>> -	node_offset = fdt_node_offset_by_compatible(blob,
>> -						    start_offset, compat_mph);
>> -	if (node_offset < 0) {
>> -		node_offset = fdt_node_offset_by_compatible(blob,
>> -							    start_offset,
>> -							    compat_dr);
>> -		if (node_offset < 0) {
>> -			printf("WARNING: could not find compatible node: %s",
>> -			       fdt_strerror(node_offset));
>> -			return -1;
>> -		}
>> -		node_type = compat_dr;
>> -	} else {
>> -		node_type = compat_mph;
>> -	}
>> +	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
>> +	if (!node_type)
>> +		return -1;
>>
>>  	if (mode) {
>>  		err = fdt_setprop(blob, node_offset, prop_mode, mode,
>>
>
>
>--
>Best regards,
>Marek Vasut

[U-Boot] [PATCH v4 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller

[Sriram Dash]

>-----Original Message-----
>From: Marek Vasut [mailto:marex at denx.de]
>Sent: Friday, March 11, 2016 10:14 PM
>To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
><ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>Subject: Re: [PATCH v4 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup
>support for xhci controller
>
>On 03/11/2016 07:26 AM, Sriram Dash wrote:
>> Enables usb device-tree fixup code to incorporate xhci controller
>>
>> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
>> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
>> ---
>> Changes in v4:
>>   - Use a terminating entry in the array for getting node type for
>> controller Changes in v3:
>>   - Modify the Makefile to remove comparison
>>   - Put the supported controllers in array and checking from array
>> Changes in v2:
>>   - Remove the #defines from the patch and adding controller support
>>
>>  drivers/usb/common/Makefile       |  1 +
>>  drivers/usb/common/fsl-dt-fixup.c | 44 +++++++++++++++++++--------------------
>>  include/fdt_support.h             |  4 ++--
>>  3 files changed, 25 insertions(+), 24 deletions(-)
>>
>> diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
>> index a38ee4a..2f3d43d 100644
>> --- a/drivers/usb/common/Makefile
>> +++ b/drivers/usb/common/Makefile
>> @@ -4,3 +4,4 @@
>>  #
>>
>>  obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o
>> +obj-$(CONFIG_USB_XHCI_FSL) += fsl-dt-fixup.o
>> diff --git a/drivers/usb/common/fsl-dt-fixup.c
>> b/drivers/usb/common/fsl-dt-fixup.c
>> index 64e20d8..b574127 100644
>> --- a/drivers/usb/common/fsl-dt-fixup.c
>> +++ b/drivers/usb/common/fsl-dt-fixup.c
>> @@ -19,15 +19,21 @@
>>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1  #endif
>>
>> -static const char *fdt_usb_get_node_type(void *blob, int
>> start_offset,
>> +static char *fdt_usb_get_node_type(void *blob, int start_offset,
>>  					 int *node_offset);
>>
>> +char compat_usb_fsl[] = {
>
>static const
>

Will take care in v5.

>> +	"fsl-usb2-mph" "\0"
>> +	"fsl-usb2-dr" "\0"
>> +	"snps,dwc3" "\0"
>> +};
>> +
>>  static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>>  				       const char *phy_type, int start_offset)  {
>>  	const char *prop_mode = "dr_mode";
>>  	const char *prop_type = "phy_type";
>> -	const char *node_type = NULL;
>> +	char *node_type = NULL;
>>  	int node_offset;
>>  	int err;
>>
>> @@ -54,29 +60,23 @@ static int fdt_fixup_usb_mode_phy_type(void *blob,
>const char *mode,
>>  	return node_offset;
>>  }
>[...]
>
>
>--
>Best regards,
>Marek Vasut

[U-Boot] [PATCH v4 4/4] drivers:usb:common:fsl-dt-fixup: fix fdt_usb_get_node_type() to return error code

[Sriram Dash]

>-----Original Message-----
>From: Marek Vasut [mailto:marex at denx.de]
>Sent: Friday, March 11, 2016 10:16 PM
>To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
><ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>Subject: Re: [PATCH v4 4/4] drivers:usb:common:fsl-dt-fixup: fix
>fdt_usb_get_node_type() to return error code
>
>On 03/11/2016 07:26 AM, Sriram Dash wrote:
>> fdt_usb_get_node_type() to return error code instead of pointer.
>
>This sentence makes no sense.
>

Will take care in v5.

>> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
>> ---
>>  drivers/usb/common/fsl-dt-fixup.c | 25 ++++++++++++++-----------
>>  1 file changed, 14 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/usb/common/fsl-dt-fixup.c
>> b/drivers/usb/common/fsl-dt-fixup.c
>> index b574127..f7137e4 100644
>> --- a/drivers/usb/common/fsl-dt-fixup.c
>> +++ b/drivers/usb/common/fsl-dt-fixup.c
>> @@ -19,8 +19,8 @@
>>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1  #endif
>>
>> -static char *fdt_usb_get_node_type(void *blob, int start_offset,
>> -					 int *node_offset);
>> +static int fdt_usb_get_node_type(void *blob, int start_offset,
>> +				 int *node_offset, char **node_type);
>>
>>  char compat_usb_fsl[] = {
>>  	"fsl-usb2-mph" "\0"
>> @@ -37,8 +37,9 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const
>char *mode,
>>  	int node_offset;
>>  	int err;
>>
>> -	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
>> -	if (!node_type)
>> +	err = fdt_usb_get_node_type(blob, start_offset,
>> +				    &node_offset, &node_type);
>> +	if (err < 0)
>>  		return -1;
>>
>>  	if (mode) {
>> @@ -60,11 +61,11 @@ static int fdt_fixup_usb_mode_phy_type(void *blob,
>const char *mode,
>>  	return node_offset;
>>  }
>>
>> -static char *fdt_usb_get_node_type(void *blob, int start_offset,
>> -					 int *node_offset)
>> +static int fdt_usb_get_node_type(void *blob, int start_offset,
>> +				 int *node_offset, char **node_type)
>>  {
>> -	char *node_type = NULL;
>>  	char *node_name, *nxt;
>> +	int ret = -1;
>
>You might as well start using errno.h
>

Will take care in v5.

>>  	for (node_name = compat_usb_fsl; *node_name; node_name = nxt + 1) {
>>  		nxt = node_name;
>> @@ -73,11 +74,12 @@ static char *fdt_usb_get_node_type(void *blob, int
>start_offset,
>>  		*node_offset = fdt_node_offset_by_compatible
>>  			       (blob, start_offset, node_name);
>>  		if (*node_offset >= 0) {
>> -			node_type = node_name;
>> +			*node_type = node_name;
>> +			ret = 0;
>>  			break;
>>  		}
>>  	}
>> -	return node_type;
>> +	return ret;
>>  }
>>
>>  static int fdt_fixup_usb_erratum(void *blob, const char
>> *prop_erratum, @@ -86,8 +88,9 @@ static int fdt_fixup_usb_erratum(void
>*blob, const char *prop_erratum,
>>  	int node_offset, err;
>>  	char *node_type = NULL;
>>
>> -	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
>> -	if (!node_type)
>> +	err = fdt_usb_get_node_type(blob, start_offset,
>> +				    &node_offset, &node_type);
>> +	if (err < 0)
>>  		return -1;
>>
>>  	err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
>>
>
>The patch is fine otherwise.
>
>--
>Best regards,
>Marek Vasut

[U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type

[Marek Vasut]

On 03/18/2016 06:05 AM, Sriram Dash wrote:
> 
>> -----Original Message-----
>> From: Marek Vasut [mailto:marex at denx.de]
>> Sent: Friday, March 11, 2016 10:14 PM
>> To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>> Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
>> <ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>> Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code
>> duplication for fdt_usb_get_node_type
>>
>> On 03/11/2016 07:26 AM, Sriram Dash wrote:
>>> Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to
>>> avoid code duplication.
>>>
>>> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
>>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>> ---
>>> Changes in v4:
>>>   - Make minimal modification to code
>>> Changes in v3:
>>>   - Move the duplication of code to new patch
>>>
>>>  drivers/usb/common/fsl-dt-fixup.c | 23 ++++++-----------------
>>>  1 file changed, 6 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/drivers/usb/common/fsl-dt-fixup.c
>>> b/drivers/usb/common/fsl-dt-fixup.c
>>> index 92adb46..64e20d8 100644
>>> --- a/drivers/usb/common/fsl-dt-fixup.c
>>> +++ b/drivers/usb/common/fsl-dt-fixup.c
>>> @@ -19,32 +19,21 @@
>>>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1  #endif
>>>
>>> +static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>>> +					 int *node_offset);
>>> +
>>
>> Why do you need this forward declaration ?
>>
> 
> The forwarded declaration is needed as the function " fdt_usb_get_node_type " is used in " fdt_fixup_usb_mode_phy_type " but defined below " fdt_fixup_usb_mode_phy_type ".
> 
> This was done to avoid the confusion created due to git diff, while moving the " fdt_usb_get_node_type " above  " fdt_fixup_usb_mode_phy_type", in v3.

Just swap those functions please.

Best regards,
Marek Vasut

[U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type

[Sriram Dash]

>-----Original Message-----
>From: Marek Vasut [mailto:marex at denx.de]
>Sent: Friday, March 18, 2016 4:51 PM
>To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
><ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code
>duplication for fdt_usb_get_node_type
>
>On 03/18/2016 06:05 AM, Sriram Dash wrote:
>>
>>> -----Original Message-----
>>> From: Marek Vasut [mailto:marex at denx.de]
>>> Sent: Friday, March 11, 2016 10:14 PM
>>> To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>>> Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
>>> <ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>> Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove
>>> code duplication for fdt_usb_get_node_type
>>>
>>> On 03/11/2016 07:26 AM, Sriram Dash wrote:
>>>> Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to
>>>> avoid code duplication.
>>>>
>>>> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
>>>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>>> ---
>>>> Changes in v4:
>>>>   - Make minimal modification to code Changes in v3:
>>>>   - Move the duplication of code to new patch
>>>>
>>>>  drivers/usb/common/fsl-dt-fixup.c | 23 ++++++-----------------
>>>>  1 file changed, 6 insertions(+), 17 deletions(-)
>>>>
>>>> diff --git a/drivers/usb/common/fsl-dt-fixup.c
>>>> b/drivers/usb/common/fsl-dt-fixup.c
>>>> index 92adb46..64e20d8 100644
>>>> --- a/drivers/usb/common/fsl-dt-fixup.c
>>>> +++ b/drivers/usb/common/fsl-dt-fixup.c
>>>> @@ -19,32 +19,21 @@
>>>>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1  #endif
>>>>
>>>> +static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>>>> +					 int *node_offset);
>>>> +
>>>
>>> Why do you need this forward declaration ?
>>>
>>
>> The forwarded declaration is needed as the function " fdt_usb_get_node_type " is
>used in " fdt_fixup_usb_mode_phy_type " but defined below "
>fdt_fixup_usb_mode_phy_type ".
>>
>> This was done to avoid the confusion created due to git diff, while moving the "
>fdt_usb_get_node_type " above  " fdt_fixup_usb_mode_phy_type", in v3.
>
>Just swap those functions please.
>

So, shall I change v4 back to v3, as the return type is being addressed in another patch v4 4/4.

>Best regards,
>Marek Vasut

[U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type

[Marek Vasut]

On 03/18/2016 12:58 PM, Sriram Dash wrote:
>> -----Original Message-----
>> From: Marek Vasut [mailto:marex at denx.de]
>> Sent: Friday, March 18, 2016 4:51 PM
>> To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>> Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
>> <ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>> Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code
>> duplication for fdt_usb_get_node_type
>>
>> On 03/18/2016 06:05 AM, Sriram Dash wrote:
>>>
>>>> -----Original Message-----
>>>> From: Marek Vasut [mailto:marex at denx.de]
>>>> Sent: Friday, March 11, 2016 10:14 PM
>>>> To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>>>> Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
>>>> <ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>>> Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove
>>>> code duplication for fdt_usb_get_node_type
>>>>
>>>> On 03/11/2016 07:26 AM, Sriram Dash wrote:
>>>>> Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to
>>>>> avoid code duplication.
>>>>>
>>>>> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
>>>>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>>>> ---
>>>>> Changes in v4:
>>>>>   - Make minimal modification to code Changes in v3:
>>>>>   - Move the duplication of code to new patch
>>>>>
>>>>>  drivers/usb/common/fsl-dt-fixup.c | 23 ++++++-----------------
>>>>>  1 file changed, 6 insertions(+), 17 deletions(-)
>>>>>
>>>>> diff --git a/drivers/usb/common/fsl-dt-fixup.c
>>>>> b/drivers/usb/common/fsl-dt-fixup.c
>>>>> index 92adb46..64e20d8 100644
>>>>> --- a/drivers/usb/common/fsl-dt-fixup.c
>>>>> +++ b/drivers/usb/common/fsl-dt-fixup.c
>>>>> @@ -19,32 +19,21 @@
>>>>>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1  #endif
>>>>>
>>>>> +static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>>>>> +					 int *node_offset);
>>>>> +
>>>>
>>>> Why do you need this forward declaration ?
>>>>
>>>
>>> The forwarded declaration is needed as the function " fdt_usb_get_node_type " is
>> used in " fdt_fixup_usb_mode_phy_type " but defined below "
>> fdt_fixup_usb_mode_phy_type ".
>>>
>>> This was done to avoid the confusion created due to git diff, while moving the "
>> fdt_usb_get_node_type " above  " fdt_fixup_usb_mode_phy_type", in v3.
>>
>> Just swap those functions please.
>>
> 
> So, shall I change v4 back to v3, as the return type is being addressed in another patch v4 4/4.

I took a look at the changelog from v3 to v4, it says "Make minimal
modification to code" , so based on that, I cannot answer the question,
sorry.

I am just asking you to reorder the functions and get rid of the forward
declaration. I don't think it has anything to do with the return type,
does it ?

-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type

[Sriram Dash]

>-----Original Message-----
>From: Marek Vasut [mailto:marex at denx.de]
>Sent: Friday, March 18, 2016 5:47 PM
>To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
><ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code
>duplication for fdt_usb_get_node_type
>
>On 03/18/2016 12:58 PM, Sriram Dash wrote:
>>> -----Original Message-----
>>> From: Marek Vasut [mailto:marex at denx.de]
>>> Sent: Friday, March 18, 2016 4:51 PM
>>> To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>>> Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
>>> <ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>> Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove
>>> code duplication for fdt_usb_get_node_type
>>>
>>> On 03/18/2016 06:05 AM, Sriram Dash wrote:
>>>>
>>>>> -----Original Message-----
>>>>> From: Marek Vasut [mailto:marex at denx.de]
>>>>> Sent: Friday, March 11, 2016 10:14 PM
>>>>> To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
>>>>> Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh
>>>>> <ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>>>> Subject: Re: [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove
>>>>> code duplication for fdt_usb_get_node_type
>>>>>
>>>>> On 03/11/2016 07:26 AM, Sriram Dash wrote:
>>>>>> Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to
>>>>>> avoid code duplication.
>>>>>>
>>>>>> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
>>>>>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>>>>> ---
>>>>>> Changes in v4:
>>>>>>   - Make minimal modification to code Changes in v3:
>>>>>>   - Move the duplication of code to new patch
>>>>>>
>>>>>>  drivers/usb/common/fsl-dt-fixup.c | 23 ++++++-----------------
>>>>>>  1 file changed, 6 insertions(+), 17 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/usb/common/fsl-dt-fixup.c
>>>>>> b/drivers/usb/common/fsl-dt-fixup.c
>>>>>> index 92adb46..64e20d8 100644
>>>>>> --- a/drivers/usb/common/fsl-dt-fixup.c
>>>>>> +++ b/drivers/usb/common/fsl-dt-fixup.c
>>>>>> @@ -19,32 +19,21 @@
>>>>>>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1  #endif
>>>>>>
>>>>>> +static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>>>>>> +					 int *node_offset);
>>>>>> +
>>>>>
>>>>> Why do you need this forward declaration ?
>>>>>
>>>>
>>>> The forwarded declaration is needed as the function "
>>>> fdt_usb_get_node_type " is
>>> used in " fdt_fixup_usb_mode_phy_type " but defined below "
>>> fdt_fixup_usb_mode_phy_type ".
>>>>
>>>> This was done to avoid the confusion created due to git diff, while moving the "
>>> fdt_usb_get_node_type " above  " fdt_fixup_usb_mode_phy_type", in v3.
>>>
>>> Just swap those functions please.
>>>
>>
>> So, shall I change v4 back to v3, as the return type is being addressed in another
>patch v4 4/4.
>
>I took a look at the changelog from v3 to v4, it says "Make minimal modification to
>code" , so based on that, I cannot answer the question, sorry.
>
>I am just asking you to reorder the functions and get rid of the forward declaration.
>I don't think it has anything to do with the return type, does it ?
>

OK. I understand, Will swap the functions in v5.

>--
>Best regards,
>Marek Vasut