[PATCH] ath10k: Advertise force AP scan feature

[PATCH] ath10k: Advertise force AP scan feature

[Vasanthakumar Thiagarajan]

Results obtained from scan can be used for spectrum management by
doing something like building information of preferred channel
lists and sharing them with stations around. It is to be noted
that traffic to the connected stations would be affected during
the scan.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ebff9c0..48b789c 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7697,7 +7697,8 @@ int ath10k_mac_register(struct ath10k *ar)
 	ar->hw->wiphy->max_remain_on_channel_duration = 5000;
 
 	ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
-	ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
+	ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
+				   NL80211_FEATURE_AP_SCAN;
 
 	ar->hw->wiphy->max_ap_assoc_sta = ar->max_num_stations;
 
-- 
1.9.1

[PATCH] ath10k: Advertise force AP scan feature

[Vasanthakumar Thiagarajan]

Results obtained from scan can be used for spectrum management by
doing something like building information of preferred channel
lists and sharing them with stations around. It is to be noted
that traffic to the connected stations would be affected during
the scan.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ebff9c0..48b789c 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7697,7 +7697,8 @@ int ath10k_mac_register(struct ath10k *ar)
 	ar->hw->wiphy->max_remain_on_channel_duration = 5000;
 
 	ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
-	ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
+	ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
+				   NL80211_FEATURE_AP_SCAN;
 
 	ar->hw->wiphy->max_ap_assoc_sta = ar->max_num_stations;
 
-- 
1.9.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [PATCH] ath10k: Advertise force AP scan feature

[Valo, Kalle]

Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> writes:

> Results obtained from scan can be used for spectrum management by
> doing something like building information of preferred channel
> lists and sharing them with stations around. It is to be noted
> that traffic to the connected stations would be affected during
> the scan.
>
> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>

Applied, thanks.

-- 
Kalle Valo

Re: [PATCH] ath10k: Advertise force AP scan feature

[Valo, Kalle]

Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> writes:

> Results obtained from scan can be used for spectrum management by
> doing something like building information of preferred channel
> lists and sharing them with stations around. It is to be noted
> that traffic to the connected stations would be affected during
> the scan.
>
> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>

Applied, thanks.

-- 
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k