All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leon Alrae <leon.alrae@imgtec.com>
To: qemu-devel@nongnu.org
Cc: yongbok.kim@imgtec.com, peter.maydell@linaro.org,
	james.hogan@imgtec.com, aurelien@aurel32.net
Subject: [Qemu-devel] [PATCH v2 02/11] target-mips: add CMGCRBase register
Date: Tue, 15 Mar 2016 09:59:27 +0000	[thread overview]
Message-ID: <1458035976-23414-3-git-send-email-leon.alrae@imgtec.com> (raw)
In-Reply-To: <1458035976-23414-1-git-send-email-leon.alrae@imgtec.com>

From: Yongbok Kim <yongbok.kim@imgtec.com>

Physical base address for the memory-mapped Coherency Manager Global
Configuration Register space.
The MIPS default location for the GCR_BASE address is 0x1FBF_8.
This register only exists if Config3 CMGCR is set to one.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
[leon.alrae@imgtec.com: move CMGCR enabling to a separate patch]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
---
 target-mips/cpu.h       |  3 ++-
 target-mips/translate.c | 18 ++++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/target-mips/cpu.h b/target-mips/cpu.h
index 4f3ebb9..55d3224 100644
--- a/target-mips/cpu.h
+++ b/target-mips/cpu.h
@@ -395,6 +395,7 @@ struct CPUMIPSState {
     target_ulong CP0_EPC;
     int32_t CP0_PRid;
     int32_t CP0_EBase;
+    target_ulong CP0_CMGCRBase;
     int32_t CP0_Config0;
 #define CP0C0_M    31
 #define CP0C0_K23  28
@@ -437,7 +438,7 @@ struct CPUMIPSState {
     int32_t CP0_Config3;
 #define CP0C3_M    31
 #define CP0C3_BPG  30
-#define CP0C3_CMCGR 29
+#define CP0C3_CMGCR 29
 #define CP0C3_MSAP  28
 #define CP0C3_BP 27
 #define CP0C3_BI 26
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 0f43bf4..8191b92 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -1432,6 +1432,7 @@ typedef struct DisasContext {
     int CP0_LLAddr_shift;
     bool ps;
     bool vp;
+    bool cmgcr;
 } DisasContext;
 
 enum {
@@ -5298,6 +5299,13 @@ static void gen_mfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
             gen_mfc0_load32(arg, offsetof(CPUMIPSState, CP0_EBase));
             rn = "EBase";
             break;
+        case 3:
+            check_insn(ctx, ISA_MIPS32R2);
+            CP0_CHECK(ctx->cmgcr);
+            tcg_gen_ld_tl(arg, cpu_env, offsetof(CPUMIPSState, CP0_CMGCRBase));
+            tcg_gen_ext32s_tl(arg, arg);
+            rn = "CMGCRBase";
+            break;
         default:
             goto cp0_unimplemented;
        }
@@ -6572,6 +6580,12 @@ static void gen_dmfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
             gen_mfc0_load32(arg, offsetof(CPUMIPSState, CP0_EBase));
             rn = "EBase";
             break;
+        case 3:
+            check_insn(ctx, ISA_MIPS32R2);
+            CP0_CHECK(ctx->cmgcr);
+            tcg_gen_ld_tl(arg, cpu_env, offsetof(CPUMIPSState, CP0_CMGCRBase));
+            rn = "CMGCRBase";
+            break;
         default:
             goto cp0_unimplemented;
         }
@@ -19663,6 +19677,7 @@ void gen_intermediate_code(CPUMIPSState *env, struct TranslationBlock *tb)
     ctx.PAMask = env->PAMask;
     ctx.mvh = (env->CP0_Config5 >> CP0C5_MVH) & 1;
     ctx.CP0_LLAddr_shift = env->CP0_LLAddr_shift;
+    ctx.cmgcr = (env->CP0_Config3 >> CP0C3_CMGCR) & 1;
     /* Restore delay slot state from the tb context.  */
     ctx.hflags = (uint32_t)tb->flags; /* FIXME: maybe use 64 bits here? */
     ctx.ulri = (env->CP0_Config3 >> CP0C3_ULRI) & 1;
@@ -20062,6 +20077,9 @@ void cpu_state_reset(CPUMIPSState *env)
     } else {
         env->CP0_EBase |= 0x80000000;
     }
+    if (env->CP0_Config3 & (1 << CP0C3_CMGCR)) {
+        env->CP0_CMGCRBase = 0x1fbf8000 >> 4;
+    }
     env->CP0_Status = (1 << CP0St_BEV) | (1 << CP0St_ERL);
     /* vectored interrupts not implemented, timer on int 7,
        no performance counters. */
-- 
2.1.0

  parent reply	other threads:[~2016-03-15 10:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-15  9:59 [Qemu-devel] [PATCH v2 00/11] hw/mips: implement Cluster Power Controller Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 01/11] hw/mips: implement generic MIPS Coherent Processing System container Leon Alrae
2016-03-15  9:59 ` Leon Alrae [this message]
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 03/11] hw/mips: add initial Global Config Register support Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 04/11] hw/mips/cps: create GCR block inside CPS Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 05/11] hw/mips: add initial Cluster Power Controller support Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 06/11] hw/mips/cps: create CPC block inside CPS Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 07/11] hw/mips_malta: remove CPUMIPSState from the write_bootloader() Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 08/11] hw/mips_malta: remove redundant irq and clock init Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 09/11] hw/mips_malta: move CPU creation to a separate function Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 10/11] hw/mips_malta: add CPS to Malta board Leon Alrae
2016-03-15  9:59 ` [Qemu-devel] [PATCH v2 11/11] target-mips: enable CM GCR in MIPS64R6-generic CPU Leon Alrae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458035976-23414-3-git-send-email-leon.alrae@imgtec.com \
    --to=leon.alrae@imgtec.com \
    --cc=aurelien@aurel32.net \
    --cc=james.hogan@imgtec.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=yongbok.kim@imgtec.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.