* [U-Boot] [PATCH] arm: sunxi: Add icnova-a20-swac defconfig
@ 2016-03-21 8:09 Stefan Roese
2016-03-22 21:42 ` Hans de Goede
0 siblings, 1 reply; 2+ messages in thread
From: Stefan Roese @ 2016-03-21 8:09 UTC (permalink / raw)
To: u-boot
The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from
In-Circuit:
http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
http://linux-sunxi.org/In-Circuit_ICnova_A20
This patch adds support for this board, including ethernet, LCD and USB
support.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marcus Heuer <marcus.heuer@swac.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
---
board/sunxi/MAINTAINERS | 5 +++++
configs/icnova-a20-swac_defconfig | 21 +++++++++++++++++++++
2 files changed, 26 insertions(+)
create mode 100644 configs/icnova-a20-swac_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 5ae5ce6..c4fe11f 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -121,6 +121,11 @@ M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Hummingbird_A31_defconfig
+ICnova-A20-SWAC BOARD
+M: Stefan Roese <sr@denx.de>
+S: Maintained
+F: configs/icnova-a20-swac_defconfig
+
ITEAD IBOX BOARD
M: Marcus Cooper <codekipper@gmail.com>
S: Maintained
diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig
new file mode 100644
index 0000000..548a07e
--- /dev/null
+++ b/configs/icnova-a20-swac_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_OLD_SUNXI_KERNEL_COMPAT=y
+CONFIG_MMC0_CD_PIN="PI5"
+CONFIG_USB0_VBUS_PIN="PG11"
+CONFIG_USB0_VBUS_DET="PH7"
+CONFIG_USB1_VBUS_PIN="PG10"
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="PH22"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,CMD_BMP,CMD_UNZIP"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_USB_EHCI_HCD=y
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] arm: sunxi: Add icnova-a20-swac defconfig
2016-03-21 8:09 [U-Boot] [PATCH] arm: sunxi: Add icnova-a20-swac defconfig Stefan Roese
@ 2016-03-22 21:42 ` Hans de Goede
0 siblings, 0 replies; 2+ messages in thread
From: Hans de Goede @ 2016-03-22 21:42 UTC (permalink / raw)
To: u-boot
Hi,
On 21-03-16 09:09, Stefan Roese wrote:
> The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from
> In-Circuit:
>
> http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
> http://linux-sunxi.org/In-Circuit_ICnova_A20
>
> This patch adds support for this board, including ethernet, LCD and USB
> support.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Marcus Heuer <marcus.heuer@swac.de>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Ian Campbell <ijc@hellion.org.uk>
Thanks, applied.
Regards,
Hans
> ---
> board/sunxi/MAINTAINERS | 5 +++++
> configs/icnova-a20-swac_defconfig | 21 +++++++++++++++++++++
> 2 files changed, 26 insertions(+)
> create mode 100644 configs/icnova-a20-swac_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 5ae5ce6..c4fe11f 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -121,6 +121,11 @@ M: Chen-Yu Tsai <wens@csie.org>
> S: Maintained
> F: configs/Hummingbird_A31_defconfig
>
> +ICnova-A20-SWAC BOARD
> +M: Stefan Roese <sr@denx.de>
> +S: Maintained
> +F: configs/icnova-a20-swac_defconfig
> +
> ITEAD IBOX BOARD
> M: Marcus Cooper <codekipper@gmail.com>
> S: Maintained
> diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig
> new file mode 100644
> index 0000000..548a07e
> --- /dev/null
> +++ b/configs/icnova-a20-swac_defconfig
> @@ -0,0 +1,21 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN7I=y
> +CONFIG_DRAM_CLK=384
> +CONFIG_OLD_SUNXI_KERNEL_COMPAT=y
> +CONFIG_MMC0_CD_PIN="PI5"
> +CONFIG_USB0_VBUS_PIN="PG11"
> +CONFIG_USB0_VBUS_DET="PH7"
> +CONFIG_USB1_VBUS_PIN="PG10"
> +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
> +CONFIG_VIDEO_LCD_POWER="PH22"
> +CONFIG_VIDEO_LCD_PANEL_LVDS=y
> +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,CMD_BMP,CMD_UNZIP"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_USB_EHCI_HCD=y
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-03-22 21:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-21 8:09 [U-Boot] [PATCH] arm: sunxi: Add icnova-a20-swac defconfig Stefan Roese
2016-03-22 21:42 ` Hans de Goede
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.