* [U-Boot] [PATCH] sunxi: Add defconfig for Sinlinx SinA31s
@ 2016-03-21 8:39 Chen-Yu Tsai
2016-03-22 21:43 ` Hans de Goede
0 siblings, 1 reply; 2+ messages in thread
From: Chen-Yu Tsai @ 2016-03-21 8:39 UTC (permalink / raw)
To: u-boot
The Sinlinx A31s SDK is a A31s based module/baseboard development kit.
The core module has the SoC, PMIC, DRAM, eMMC and supporting components.
There are also pads for UART0, JTAG and I2S.
The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0
hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume
buttons, RS232 style UART and USB OTG (though VBUS is not connected).
Various headers are available for other addon modules, such as SDIO
WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
board/sunxi/MAINTAINERS | 6 ++++++
configs/Sinlinx_SinA31s_defconfig | 21 +++++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 configs/Sinlinx_SinA31s_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 5ae5ce6..8cb9051 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -191,6 +191,12 @@ M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
S: Maintained
F: configs/MSI_Primo81_defconfig
+SINLINX SINA31s BOARD
+M: Chen-Yu Tsai <wens@csie.org>
+S: Maintained
+F: configs/Sinlinx_SinA31s_defconfig
+W: http://linux-sunxi.org/Sinlinx_SinA31s
+
SINLINX SINA33 BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig
new file mode 100644
index 0000000..9254bb2
--- /dev/null
+++ b/configs/Sinlinx_SinA31s_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_CLK=432
+CONFIG_DRAM_ZQ=251
+CONFIG_MMC0_CD_PIN="PA4"
+CONFIG_MMC3_PINS="PC"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=3
+CONFIG_USB1_VBUS_PIN=""
+CONFIG_USB2_VBUS_PIN=""
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
--
2.7.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Sinlinx SinA31s
2016-03-21 8:39 [U-Boot] [PATCH] sunxi: Add defconfig for Sinlinx SinA31s Chen-Yu Tsai
@ 2016-03-22 21:43 ` Hans de Goede
0 siblings, 0 replies; 2+ messages in thread
From: Hans de Goede @ 2016-03-22 21:43 UTC (permalink / raw)
To: u-boot
Hi,
On 21-03-16 09:39, Chen-Yu Tsai wrote:
> The Sinlinx A31s SDK is a A31s based module/baseboard development kit.
>
> The core module has the SoC, PMIC, DRAM, eMMC and supporting components.
> There are also pads for UART0, JTAG and I2S.
>
> The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0
> hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume
> buttons, RS232 style UART and USB OTG (though VBUS is not connected).
> Various headers are available for other addon modules, such as SDIO
> WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Thanks, applied.
Regards,
Hans
> ---
> board/sunxi/MAINTAINERS | 6 ++++++
> configs/Sinlinx_SinA31s_defconfig | 21 +++++++++++++++++++++
> 2 files changed, 27 insertions(+)
> create mode 100644 configs/Sinlinx_SinA31s_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 5ae5ce6..8cb9051 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -191,6 +191,12 @@ M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
> S: Maintained
> F: configs/MSI_Primo81_defconfig
>
> +SINLINX SINA31s BOARD
> +M: Chen-Yu Tsai <wens@csie.org>
> +S: Maintained
> +F: configs/Sinlinx_SinA31s_defconfig
> +W: http://linux-sunxi.org/Sinlinx_SinA31s
> +
> SINLINX SINA33 BOARD
> M: Chen-Yu Tsai <wens@csie.org>
> S: Maintained
> diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig
> new file mode 100644
> index 0000000..9254bb2
> --- /dev/null
> +++ b/configs/Sinlinx_SinA31s_defconfig
> @@ -0,0 +1,21 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN6I=y
> +CONFIG_DRAM_CLK=432
> +CONFIG_DRAM_ZQ=251
> +CONFIG_MMC0_CD_PIN="PA4"
> +CONFIG_MMC3_PINS="PC"
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=3
> +CONFIG_USB1_VBUS_PIN=""
> +CONFIG_USB2_VBUS_PIN=""
> +CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_AXP_DLDO1_VOLT=3300
> +CONFIG_USB_EHCI_HCD=y
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-03-22 21:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-21 8:39 [U-Boot] [PATCH] sunxi: Add defconfig for Sinlinx SinA31s Chen-Yu Tsai
2016-03-22 21:43 ` Hans de Goede
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.