[PATCH 15/15] drm/i915: Split PNV version of crtc_compute_clock()

[Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>]

Split a pnv_crtc_compute_clock(), so the differences between platforms
become more obvious.

With this, there are no more users of intel_limit() or the ->find_dpll()
hook, so get rid of them.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |  18 -----
 drivers/gpu/drm/i915/intel_display.c | 134 +++++++++++++++++++++--------------
 2 files changed, 79 insertions(+), 73 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index efca534..83ee8d7 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -575,24 +575,6 @@ struct dpll;
 struct drm_i915_display_funcs {
 	int (*get_display_clock_speed)(struct drm_device *dev);
 	int (*get_fifo_size)(struct drm_device *dev, int plane);
-	/**
-	 * find_dpll() - Find the best values for the PLL
-	 * @limit: limits for the PLL
-	 * @crtc: current CRTC
-	 * @target: target frequency in kHz
-	 * @refclk: reference clock frequency in kHz
-	 * @match_clock: if provided, @best_clock P divider must
-	 *               match the P divider from @match_clock
-	 *               used for LVDS downclocking
-	 * @best_clock: best PLL values found
-	 *
-	 * Returns true on success, false on failure.
-	 */
-	bool (*find_dpll)(const struct intel_limit *limit,
-			  struct intel_crtc_state *crtc_state,
-			  int target, int refclk,
-			  struct dpll *match_clock,
-			  struct dpll *best_clock);
 	int (*compute_pipe_wm)(struct intel_crtc_state *cstate);
 	int (*compute_intermediate_wm)(struct drm_device *dev,
 				       struct intel_crtc *intel_crtc,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 552fd4c..4d7c29a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -566,33 +566,6 @@ static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
 	return false;
 }
 
-static const intel_limit_t *
-intel_limit(struct intel_crtc_state *crtc_state, int refclk)
-{
-	struct drm_device *dev = crtc_state->base.crtc->dev;
-	const intel_limit_t *limit;
-
-	if (IS_BROXTON(dev) || IS_CHERRYVIEW(dev) || IS_VALLEYVIEW(dev) ||
-	    HAS_PCH_SPLIT(dev) || IS_G4X(dev) || IS_GEN2(dev))
-		limit = NULL;
-
-	if (IS_PINEVIEW(dev)) {
-		if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits_pineview_lvds;
-		else
-			limit = &intel_limits_pineview_sdvo;
-	} else if (!IS_GEN2(dev)) {
-		if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits_i9xx_lvds;
-		else
-			limit = &intel_limits_i9xx_sdvo;
-	}
-
-	WARN_ON(limit == NULL);
-
-	return limit;
-}
-
 /*
  * Platform specific helpers to calculate the port PLL loopback- (clock.m),
  * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
@@ -723,6 +696,16 @@ i9xx_select_p2_div(const intel_limit_t *limit,
 	}
 }
 
+/*
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ *
+ * Target and reference clocks are specified in kHz.
+ *
+ * If match_clock is provided, then best_clock P divider must match the P
+ * divider from @match_clock used for LVDS downclocking.
+ */
 static bool
 i9xx_find_best_dpll(const intel_limit_t *limit,
 		    struct intel_crtc_state *crtc_state,
@@ -770,6 +753,16 @@ i9xx_find_best_dpll(const intel_limit_t *limit,
 	return (err != target);
 }
 
+/*
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ *
+ * Target and reference clocks are specified in kHz.
+ *
+ * If match_clock is provided, then best_clock P divider must match the P
+ * divider from @match_clock used for LVDS downclocking.
+ */
 static bool
 pnv_find_best_dpll(const intel_limit_t *limit,
 		   struct intel_crtc_state *crtc_state,
@@ -819,6 +812,11 @@ pnv_find_best_dpll(const intel_limit_t *limit,
  * Returns a set of divisors for the desired target clock with the given
  * refclk, or FALSE.  The returned values represent the clock equation:
  * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ *
+ * Target and reference clocks are specified in kHz.
+ *
+ * If match_clock is provided, then best_clock P divider must match the P
+ * divider from @match_clock used for LVDS downclocking.
  */
 static bool
 g4x_find_best_dpll(const intel_limit_t *limit,
@@ -7904,43 +7902,67 @@ static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
 	return 0;
 }
 
+static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
+				  struct intel_crtc_state *crtc_state)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	const intel_limit_t *limit;
+	int refclk = 96000;
+
+	memset(&crtc_state->dpll_hw_state, 0,
+	       sizeof(crtc_state->dpll_hw_state));
+
+	if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			refclk = dev_priv->vbt.lvds_ssc_freq;
+			DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
+		}
+
+		limit = &intel_limits_pineview_lvds;
+	} else {
+		limit = &intel_limits_pineview_sdvo;
+	}
+
+	if (!crtc_state->clock_set &&
+	    !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				refclk, NULL, &crtc_state->dpll)) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	i9xx_compute_dpll(crtc, crtc_state, NULL);
+
+	return 0;
+}
+
 static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
 				   struct intel_crtc_state *crtc_state)
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	bool ok;
 	const intel_limit_t *limit;
 	int refclk = 96000;
 
 	memset(&crtc_state->dpll_hw_state, 0,
 	       sizeof(crtc_state->dpll_hw_state));
 
-	if (crtc_state->has_dsi_encoder)
-		return 0;
+	if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			refclk = dev_priv->vbt.lvds_ssc_freq;
+			DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
+		}
 
-	if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
-	    intel_panel_use_ssc(dev_priv)) {
-		refclk = dev_priv->vbt.lvds_ssc_freq;
-		DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
+		limit = &intel_limits_i9xx_lvds;
+	} else {
+		limit = &intel_limits_i9xx_sdvo;
 	}
 
-	if (!crtc_state->clock_set) {
-		/*
-		 * Returns a set of divisors for the desired target clock with
-		 * the given refclk, or FALSE.  The returned values represent
-		 * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
-		 * 2) / p1 / p2.
-		 */
-		limit = intel_limit(crtc_state, refclk);
-		ok = dev_priv->display.find_dpll(limit, crtc_state,
-						 crtc_state->port_clock,
-						 refclk, NULL,
-						 &crtc_state->dpll);
-		if (!ok) {
-			DRM_ERROR("Couldn't find PLL settings for mode!\n");
-			return -EINVAL;
-		}
+	if (!crtc_state->clock_set &&
+	    !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				 refclk, NULL, &crtc_state->dpll)) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
 	}
 
 	i9xx_compute_dpll(crtc, crtc_state, NULL);
@@ -14925,11 +14947,6 @@ static const struct drm_mode_config_funcs intel_mode_funcs = {
  */
 void intel_init_display_hooks(struct drm_i915_private *dev_priv)
 {
-	if (IS_PINEVIEW(dev_priv))
-		dev_priv->display.find_dpll = pnv_find_best_dpll;
-	else
-		dev_priv->display.find_dpll = i9xx_find_best_dpll;
-
 	if (INTEL_INFO(dev_priv)->gen >= 9) {
 		dev_priv->display.get_pipe_config = haswell_get_pipe_config;
 		dev_priv->display.get_initial_plane_config =
@@ -14975,6 +14992,13 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
 		dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
 		dev_priv->display.crtc_enable = i9xx_crtc_enable;
 		dev_priv->display.crtc_disable = i9xx_crtc_disable;
+	} else if (IS_PINEVIEW(dev_priv)) {
+		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
+		dev_priv->display.get_initial_plane_config =
+			i9xx_get_initial_plane_config;
+		dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
+		dev_priv->display.crtc_enable = i9xx_crtc_enable;
+		dev_priv->display.crtc_disable = i9xx_crtc_disable;
 	} else if (!IS_GEN2(dev_priv)) {
 		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
 		dev_priv->display.get_initial_plane_config =
-- 
2.4.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx