From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH resend v2 3/9] mfd: axp20x: Add support for AXP809 PMIC
Date: Tue, 29 Mar 2016 17:22:26 +0800 [thread overview]
Message-ID: <1459243352-23344-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1459243352-23344-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
The X-Powers AXP809 is a new PMIC that is paired with Allwinner's A80
SoC, along with a slave AXP806 PMIC.
This PMIC is quite similar to the earlier AXP223, though the interrupts
and regulator have changed a bit.
This patch adds support for the interrupts and power button of the PMIC.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
drivers/mfd/axp20x-rsb.c | 1 +
drivers/mfd/axp20x.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 59 ++++++++++++++++++++++++++++++++++
3 files changed, 139 insertions(+)
diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
index 28c20247c112..a407527bcd09 100644
--- a/drivers/mfd/axp20x-rsb.c
+++ b/drivers/mfd/axp20x-rsb.c
@@ -61,6 +61,7 @@ static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
static const struct of_device_id axp20x_rsb_of_match[] = {
{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+ { .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
{ },
};
MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index a57d6e940610..1ce923277cc8 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -37,6 +37,7 @@ static const char * const axp20x_model_names[] = {
"AXP221",
"AXP223",
"AXP288",
+ "AXP809",
};
static const struct regmap_range axp152_writeable_ranges[] = {
@@ -85,6 +86,7 @@ static const struct regmap_access_table axp20x_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+/* AXP22x ranges are shared with the AXP809, as they cover the same range */
static const struct regmap_range axp22x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
@@ -211,6 +213,20 @@ static struct resource axp288_fuel_gauge_resources[] = {
},
};
+static struct resource axp809_pek_resources[] = {
+ {
+ .name = "PEK_DBR",
+ .start = AXP809_IRQ_PEK_RIS_EDGE,
+ .end = AXP809_IRQ_PEK_RIS_EDGE,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "PEK_DBF",
+ .start = AXP809_IRQ_PEK_FAL_EDGE,
+ .end = AXP809_IRQ_PEK_FAL_EDGE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static const struct regmap_config axp152_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -378,6 +394,41 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
+static const struct regmap_irq axp809_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP809, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP809, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END, 2, 6),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW, 2, 5),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END, 2, 4),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH, 2, 3),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END, 2, 2),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW, 2, 1),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END, 2, 0),
+ INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH, 3, 7),
+ INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP809, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE, 4, 6),
+ INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE, 4, 5),
+ INIT_REGMAP_IRQ(AXP809, PEK_SHORT, 4, 4),
+ INIT_REGMAP_IRQ(AXP809, PEK_LONG, 4, 3),
+ INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF, 4, 2),
+ INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0),
+};
+
static const struct regmap_irq_chip axp152_regmap_irq_chip = {
.name = "axp152_irq_chip",
.status_base = AXP152_IRQ1_STATE,
@@ -428,6 +479,18 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
};
+static const struct regmap_irq_chip axp809_regmap_irq_chip = {
+ .name = "axp809",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
+ .mask_invert = true,
+ .init_ack_masked = true,
+ .irqs = axp809_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp809_regmap_irqs),
+ .num_regs = 5,
+};
+
static struct mfd_cell axp20x_cells[] = {
{
.name = "axp20x-pek",
@@ -572,6 +635,16 @@ static struct mfd_cell axp288_cells[] = {
},
};
+static struct mfd_cell axp809_cells[] = {
+ {
+ .name = "axp20x-pek",
+ .num_resources = ARRAY_SIZE(axp809_pek_resources),
+ .resources = axp809_pek_resources,
+ }, {
+ .name = "axp20x-regulator",
+ },
+};
+
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
@@ -631,6 +704,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
axp20x->regmap_cfg = &axp288_regmap_config;
axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
break;
+ case AXP809_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp809_cells);
+ axp20x->cells = axp809_cells;
+ axp20x->regmap_cfg = &axp22x_regmap_config;
+ axp20x->regmap_irq_chip = &axp809_regmap_irq_chip;
+ break;
default:
dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
return -EINVAL;
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index d82e7d51372b..0be4982f08fe 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -20,6 +20,7 @@ enum {
AXP221_ID,
AXP223_ID,
AXP288_ID,
+ AXP809_ID,
NR_AXP20X_VARIANTS,
};
@@ -264,6 +265,29 @@ enum {
AXP22X_REG_ID_MAX,
};
+enum {
+ AXP809_DCDC1 = 0,
+ AXP809_DCDC2,
+ AXP809_DCDC3,
+ AXP809_DCDC4,
+ AXP809_DCDC5,
+ AXP809_DC1SW,
+ AXP809_DC5LDO,
+ AXP809_ALDO1,
+ AXP809_ALDO2,
+ AXP809_ALDO3,
+ AXP809_ELDO1,
+ AXP809_ELDO2,
+ AXP809_ELDO3,
+ AXP809_DLDO1,
+ AXP809_DLDO2,
+ AXP809_RTC_LDO,
+ AXP809_LDO_IO0,
+ AXP809_LDO_IO1,
+ AXP809_SW,
+ AXP809_REG_ID_MAX,
+};
+
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,
@@ -390,6 +414,41 @@ enum axp288_irqs {
AXP288_IRQ_BC_USB_CHNG,
};
+enum axp809_irqs {
+ AXP809_IRQ_ACIN_OVER_V = 1,
+ AXP809_IRQ_ACIN_PLUGIN,
+ AXP809_IRQ_ACIN_REMOVAL,
+ AXP809_IRQ_VBUS_OVER_V,
+ AXP809_IRQ_VBUS_PLUGIN,
+ AXP809_IRQ_VBUS_REMOVAL,
+ AXP809_IRQ_VBUS_V_LOW,
+ AXP809_IRQ_BATT_PLUGIN,
+ AXP809_IRQ_BATT_REMOVAL,
+ AXP809_IRQ_BATT_ENT_ACT_MODE,
+ AXP809_IRQ_BATT_EXIT_ACT_MODE,
+ AXP809_IRQ_CHARG,
+ AXP809_IRQ_CHARG_DONE,
+ AXP809_IRQ_BATT_CHG_TEMP_HIGH,
+ AXP809_IRQ_BATT_CHG_TEMP_HIGH_END,
+ AXP809_IRQ_BATT_CHG_TEMP_LOW,
+ AXP809_IRQ_BATT_CHG_TEMP_LOW_END,
+ AXP809_IRQ_BATT_ACT_TEMP_HIGH,
+ AXP809_IRQ_BATT_ACT_TEMP_HIGH_END,
+ AXP809_IRQ_BATT_ACT_TEMP_LOW,
+ AXP809_IRQ_BATT_ACT_TEMP_LOW_END,
+ AXP809_IRQ_DIE_TEMP_HIGH,
+ AXP809_IRQ_LOW_PWR_LVL1,
+ AXP809_IRQ_LOW_PWR_LVL2,
+ AXP809_IRQ_TIMER,
+ AXP809_IRQ_PEK_RIS_EDGE,
+ AXP809_IRQ_PEK_FAL_EDGE,
+ AXP809_IRQ_PEK_SHORT,
+ AXP809_IRQ_PEK_LONG,
+ AXP809_IRQ_PEK_OVER_OFF,
+ AXP809_IRQ_GPIO1_INPUT,
+ AXP809_IRQ_GPIO0_INPUT,
+};
+
#define AXP288_TS_ADC_H 0x58
#define AXP288_TS_ADC_L 0x59
#define AXP288_GP_ADC_H 0x5a
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@csie.org>
To: Lee Jones <lee.jones@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com
Subject: [PATCH resend v2 3/9] mfd: axp20x: Add support for AXP809 PMIC
Date: Tue, 29 Mar 2016 17:22:26 +0800 [thread overview]
Message-ID: <1459243352-23344-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1459243352-23344-1-git-send-email-wens@csie.org>
The X-Powers AXP809 is a new PMIC that is paired with Allwinner's A80
SoC, along with a slave AXP806 PMIC.
This PMIC is quite similar to the earlier AXP223, though the interrupts
and regulator have changed a bit.
This patch adds support for the interrupts and power button of the PMIC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/mfd/axp20x-rsb.c | 1 +
drivers/mfd/axp20x.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 59 ++++++++++++++++++++++++++++++++++
3 files changed, 139 insertions(+)
diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
index 28c20247c112..a407527bcd09 100644
--- a/drivers/mfd/axp20x-rsb.c
+++ b/drivers/mfd/axp20x-rsb.c
@@ -61,6 +61,7 @@ static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
static const struct of_device_id axp20x_rsb_of_match[] = {
{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+ { .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
{ },
};
MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index a57d6e940610..1ce923277cc8 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -37,6 +37,7 @@ static const char * const axp20x_model_names[] = {
"AXP221",
"AXP223",
"AXP288",
+ "AXP809",
};
static const struct regmap_range axp152_writeable_ranges[] = {
@@ -85,6 +86,7 @@ static const struct regmap_access_table axp20x_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+/* AXP22x ranges are shared with the AXP809, as they cover the same range */
static const struct regmap_range axp22x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
@@ -211,6 +213,20 @@ static struct resource axp288_fuel_gauge_resources[] = {
},
};
+static struct resource axp809_pek_resources[] = {
+ {
+ .name = "PEK_DBR",
+ .start = AXP809_IRQ_PEK_RIS_EDGE,
+ .end = AXP809_IRQ_PEK_RIS_EDGE,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "PEK_DBF",
+ .start = AXP809_IRQ_PEK_FAL_EDGE,
+ .end = AXP809_IRQ_PEK_FAL_EDGE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static const struct regmap_config axp152_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -378,6 +394,41 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
+static const struct regmap_irq axp809_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP809, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP809, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END, 2, 6),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW, 2, 5),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END, 2, 4),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH, 2, 3),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END, 2, 2),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW, 2, 1),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END, 2, 0),
+ INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH, 3, 7),
+ INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP809, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE, 4, 6),
+ INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE, 4, 5),
+ INIT_REGMAP_IRQ(AXP809, PEK_SHORT, 4, 4),
+ INIT_REGMAP_IRQ(AXP809, PEK_LONG, 4, 3),
+ INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF, 4, 2),
+ INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0),
+};
+
static const struct regmap_irq_chip axp152_regmap_irq_chip = {
.name = "axp152_irq_chip",
.status_base = AXP152_IRQ1_STATE,
@@ -428,6 +479,18 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
};
+static const struct regmap_irq_chip axp809_regmap_irq_chip = {
+ .name = "axp809",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
+ .mask_invert = true,
+ .init_ack_masked = true,
+ .irqs = axp809_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp809_regmap_irqs),
+ .num_regs = 5,
+};
+
static struct mfd_cell axp20x_cells[] = {
{
.name = "axp20x-pek",
@@ -572,6 +635,16 @@ static struct mfd_cell axp288_cells[] = {
},
};
+static struct mfd_cell axp809_cells[] = {
+ {
+ .name = "axp20x-pek",
+ .num_resources = ARRAY_SIZE(axp809_pek_resources),
+ .resources = axp809_pek_resources,
+ }, {
+ .name = "axp20x-regulator",
+ },
+};
+
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
@@ -631,6 +704,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
axp20x->regmap_cfg = &axp288_regmap_config;
axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
break;
+ case AXP809_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp809_cells);
+ axp20x->cells = axp809_cells;
+ axp20x->regmap_cfg = &axp22x_regmap_config;
+ axp20x->regmap_irq_chip = &axp809_regmap_irq_chip;
+ break;
default:
dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
return -EINVAL;
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index d82e7d51372b..0be4982f08fe 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -20,6 +20,7 @@ enum {
AXP221_ID,
AXP223_ID,
AXP288_ID,
+ AXP809_ID,
NR_AXP20X_VARIANTS,
};
@@ -264,6 +265,29 @@ enum {
AXP22X_REG_ID_MAX,
};
+enum {
+ AXP809_DCDC1 = 0,
+ AXP809_DCDC2,
+ AXP809_DCDC3,
+ AXP809_DCDC4,
+ AXP809_DCDC5,
+ AXP809_DC1SW,
+ AXP809_DC5LDO,
+ AXP809_ALDO1,
+ AXP809_ALDO2,
+ AXP809_ALDO3,
+ AXP809_ELDO1,
+ AXP809_ELDO2,
+ AXP809_ELDO3,
+ AXP809_DLDO1,
+ AXP809_DLDO2,
+ AXP809_RTC_LDO,
+ AXP809_LDO_IO0,
+ AXP809_LDO_IO1,
+ AXP809_SW,
+ AXP809_REG_ID_MAX,
+};
+
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,
@@ -390,6 +414,41 @@ enum axp288_irqs {
AXP288_IRQ_BC_USB_CHNG,
};
+enum axp809_irqs {
+ AXP809_IRQ_ACIN_OVER_V = 1,
+ AXP809_IRQ_ACIN_PLUGIN,
+ AXP809_IRQ_ACIN_REMOVAL,
+ AXP809_IRQ_VBUS_OVER_V,
+ AXP809_IRQ_VBUS_PLUGIN,
+ AXP809_IRQ_VBUS_REMOVAL,
+ AXP809_IRQ_VBUS_V_LOW,
+ AXP809_IRQ_BATT_PLUGIN,
+ AXP809_IRQ_BATT_REMOVAL,
+ AXP809_IRQ_BATT_ENT_ACT_MODE,
+ AXP809_IRQ_BATT_EXIT_ACT_MODE,
+ AXP809_IRQ_CHARG,
+ AXP809_IRQ_CHARG_DONE,
+ AXP809_IRQ_BATT_CHG_TEMP_HIGH,
+ AXP809_IRQ_BATT_CHG_TEMP_HIGH_END,
+ AXP809_IRQ_BATT_CHG_TEMP_LOW,
+ AXP809_IRQ_BATT_CHG_TEMP_LOW_END,
+ AXP809_IRQ_BATT_ACT_TEMP_HIGH,
+ AXP809_IRQ_BATT_ACT_TEMP_HIGH_END,
+ AXP809_IRQ_BATT_ACT_TEMP_LOW,
+ AXP809_IRQ_BATT_ACT_TEMP_LOW_END,
+ AXP809_IRQ_DIE_TEMP_HIGH,
+ AXP809_IRQ_LOW_PWR_LVL1,
+ AXP809_IRQ_LOW_PWR_LVL2,
+ AXP809_IRQ_TIMER,
+ AXP809_IRQ_PEK_RIS_EDGE,
+ AXP809_IRQ_PEK_FAL_EDGE,
+ AXP809_IRQ_PEK_SHORT,
+ AXP809_IRQ_PEK_LONG,
+ AXP809_IRQ_PEK_OVER_OFF,
+ AXP809_IRQ_GPIO1_INPUT,
+ AXP809_IRQ_GPIO0_INPUT,
+};
+
#define AXP288_TS_ADC_H 0x58
#define AXP288_TS_ADC_L 0x59
#define AXP288_GP_ADC_H 0x5a
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH resend v2 3/9] mfd: axp20x: Add support for AXP809 PMIC
Date: Tue, 29 Mar 2016 17:22:26 +0800 [thread overview]
Message-ID: <1459243352-23344-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1459243352-23344-1-git-send-email-wens@csie.org>
The X-Powers AXP809 is a new PMIC that is paired with Allwinner's A80
SoC, along with a slave AXP806 PMIC.
This PMIC is quite similar to the earlier AXP223, though the interrupts
and regulator have changed a bit.
This patch adds support for the interrupts and power button of the PMIC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/mfd/axp20x-rsb.c | 1 +
drivers/mfd/axp20x.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 59 ++++++++++++++++++++++++++++++++++
3 files changed, 139 insertions(+)
diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
index 28c20247c112..a407527bcd09 100644
--- a/drivers/mfd/axp20x-rsb.c
+++ b/drivers/mfd/axp20x-rsb.c
@@ -61,6 +61,7 @@ static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
static const struct of_device_id axp20x_rsb_of_match[] = {
{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+ { .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
{ },
};
MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index a57d6e940610..1ce923277cc8 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -37,6 +37,7 @@ static const char * const axp20x_model_names[] = {
"AXP221",
"AXP223",
"AXP288",
+ "AXP809",
};
static const struct regmap_range axp152_writeable_ranges[] = {
@@ -85,6 +86,7 @@ static const struct regmap_access_table axp20x_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+/* AXP22x ranges are shared with the AXP809, as they cover the same range */
static const struct regmap_range axp22x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
@@ -211,6 +213,20 @@ static struct resource axp288_fuel_gauge_resources[] = {
},
};
+static struct resource axp809_pek_resources[] = {
+ {
+ .name = "PEK_DBR",
+ .start = AXP809_IRQ_PEK_RIS_EDGE,
+ .end = AXP809_IRQ_PEK_RIS_EDGE,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "PEK_DBF",
+ .start = AXP809_IRQ_PEK_FAL_EDGE,
+ .end = AXP809_IRQ_PEK_FAL_EDGE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static const struct regmap_config axp152_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -378,6 +394,41 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
+static const struct regmap_irq axp809_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP809, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP809, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END, 2, 6),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW, 2, 5),
+ INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END, 2, 4),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH, 2, 3),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END, 2, 2),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW, 2, 1),
+ INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END, 2, 0),
+ INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH, 3, 7),
+ INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP809, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE, 4, 6),
+ INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE, 4, 5),
+ INIT_REGMAP_IRQ(AXP809, PEK_SHORT, 4, 4),
+ INIT_REGMAP_IRQ(AXP809, PEK_LONG, 4, 3),
+ INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF, 4, 2),
+ INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0),
+};
+
static const struct regmap_irq_chip axp152_regmap_irq_chip = {
.name = "axp152_irq_chip",
.status_base = AXP152_IRQ1_STATE,
@@ -428,6 +479,18 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
};
+static const struct regmap_irq_chip axp809_regmap_irq_chip = {
+ .name = "axp809",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
+ .mask_invert = true,
+ .init_ack_masked = true,
+ .irqs = axp809_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp809_regmap_irqs),
+ .num_regs = 5,
+};
+
static struct mfd_cell axp20x_cells[] = {
{
.name = "axp20x-pek",
@@ -572,6 +635,16 @@ static struct mfd_cell axp288_cells[] = {
},
};
+static struct mfd_cell axp809_cells[] = {
+ {
+ .name = "axp20x-pek",
+ .num_resources = ARRAY_SIZE(axp809_pek_resources),
+ .resources = axp809_pek_resources,
+ }, {
+ .name = "axp20x-regulator",
+ },
+};
+
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
@@ -631,6 +704,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
axp20x->regmap_cfg = &axp288_regmap_config;
axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
break;
+ case AXP809_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp809_cells);
+ axp20x->cells = axp809_cells;
+ axp20x->regmap_cfg = &axp22x_regmap_config;
+ axp20x->regmap_irq_chip = &axp809_regmap_irq_chip;
+ break;
default:
dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
return -EINVAL;
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index d82e7d51372b..0be4982f08fe 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -20,6 +20,7 @@ enum {
AXP221_ID,
AXP223_ID,
AXP288_ID,
+ AXP809_ID,
NR_AXP20X_VARIANTS,
};
@@ -264,6 +265,29 @@ enum {
AXP22X_REG_ID_MAX,
};
+enum {
+ AXP809_DCDC1 = 0,
+ AXP809_DCDC2,
+ AXP809_DCDC3,
+ AXP809_DCDC4,
+ AXP809_DCDC5,
+ AXP809_DC1SW,
+ AXP809_DC5LDO,
+ AXP809_ALDO1,
+ AXP809_ALDO2,
+ AXP809_ALDO3,
+ AXP809_ELDO1,
+ AXP809_ELDO2,
+ AXP809_ELDO3,
+ AXP809_DLDO1,
+ AXP809_DLDO2,
+ AXP809_RTC_LDO,
+ AXP809_LDO_IO0,
+ AXP809_LDO_IO1,
+ AXP809_SW,
+ AXP809_REG_ID_MAX,
+};
+
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,
@@ -390,6 +414,41 @@ enum axp288_irqs {
AXP288_IRQ_BC_USB_CHNG,
};
+enum axp809_irqs {
+ AXP809_IRQ_ACIN_OVER_V = 1,
+ AXP809_IRQ_ACIN_PLUGIN,
+ AXP809_IRQ_ACIN_REMOVAL,
+ AXP809_IRQ_VBUS_OVER_V,
+ AXP809_IRQ_VBUS_PLUGIN,
+ AXP809_IRQ_VBUS_REMOVAL,
+ AXP809_IRQ_VBUS_V_LOW,
+ AXP809_IRQ_BATT_PLUGIN,
+ AXP809_IRQ_BATT_REMOVAL,
+ AXP809_IRQ_BATT_ENT_ACT_MODE,
+ AXP809_IRQ_BATT_EXIT_ACT_MODE,
+ AXP809_IRQ_CHARG,
+ AXP809_IRQ_CHARG_DONE,
+ AXP809_IRQ_BATT_CHG_TEMP_HIGH,
+ AXP809_IRQ_BATT_CHG_TEMP_HIGH_END,
+ AXP809_IRQ_BATT_CHG_TEMP_LOW,
+ AXP809_IRQ_BATT_CHG_TEMP_LOW_END,
+ AXP809_IRQ_BATT_ACT_TEMP_HIGH,
+ AXP809_IRQ_BATT_ACT_TEMP_HIGH_END,
+ AXP809_IRQ_BATT_ACT_TEMP_LOW,
+ AXP809_IRQ_BATT_ACT_TEMP_LOW_END,
+ AXP809_IRQ_DIE_TEMP_HIGH,
+ AXP809_IRQ_LOW_PWR_LVL1,
+ AXP809_IRQ_LOW_PWR_LVL2,
+ AXP809_IRQ_TIMER,
+ AXP809_IRQ_PEK_RIS_EDGE,
+ AXP809_IRQ_PEK_FAL_EDGE,
+ AXP809_IRQ_PEK_SHORT,
+ AXP809_IRQ_PEK_LONG,
+ AXP809_IRQ_PEK_OVER_OFF,
+ AXP809_IRQ_GPIO1_INPUT,
+ AXP809_IRQ_GPIO0_INPUT,
+};
+
#define AXP288_TS_ADC_H 0x58
#define AXP288_TS_ADC_L 0x59
#define AXP288_GP_ADC_H 0x5a
--
2.7.0
next prev parent reply other threads:[~2016-03-29 9:22 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-29 9:22 [PATCH resend v2 0/9] mfd: axp20x: Add support for AXP809 PMIC Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
[not found] ` <1459243352-23344-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2016-03-29 9:22 ` [PATCH resend v2 1/9] MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
[not found] ` <1459243352-23344-2-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2016-04-25 16:27 ` Lee Jones
2016-04-25 16:27 ` Lee Jones
2016-04-25 16:27 ` Lee Jones
2016-03-29 9:22 ` [PATCH resend v2 2/9] mfd: axp20x: Add bindings for AXP809 PMIC Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
[not found] ` <1459243352-23344-3-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2016-04-11 8:24 ` Lee Jones
2016-04-11 8:24 ` Lee Jones
2016-04-11 8:24 ` Lee Jones
2016-03-29 9:22 ` Chen-Yu Tsai [this message]
2016-03-29 9:22 ` [PATCH resend v2 3/9] mfd: axp20x: Add support " Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
[not found] ` <1459243352-23344-4-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2016-04-11 8:24 ` Lee Jones
2016-04-11 8:24 ` Lee Jones
2016-04-11 8:24 ` Lee Jones
2016-04-22 6:58 ` Chen-Yu Tsai
2016-04-22 6:58 ` Chen-Yu Tsai
2016-04-22 6:58 ` Chen-Yu Tsai
2016-03-29 9:22 ` [PATCH resend v2 4/9] regulator: axp20x: support AXP809 variant Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
[not found] ` <1459243352-23344-5-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2016-03-29 9:51 ` Priit Laes
2016-03-29 9:51 ` [linux-sunxi] " Priit Laes
2016-03-29 9:51 ` Priit Laes
2016-03-29 16:09 ` Mark Brown
2016-03-29 16:09 ` Mark Brown
2016-03-29 16:09 ` Mark Brown
2016-03-29 9:22 ` [PATCH resend v2 5/9] ARM: dts: sunxi: Add dtsi file for AXP809 PMIC Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` [PATCH resend v2 6/9] ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and regulators Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` [PATCH resend v2 7/9] ARM: dts: sun9i: cubieboard4: " Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` [PATCH resend v2 8/9] ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0 Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` [PATCH resend v2 9/9] ARM: dts: sun9i: cubieboard4: " Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-03-29 9:22 ` Chen-Yu Tsai
2016-04-11 0:27 ` [PATCH resend v2 0/9] mfd: axp20x: Add support for AXP809 PMIC Chen-Yu Tsai
2016-04-11 0:27 ` Chen-Yu Tsai
2016-04-11 0:27 ` Chen-Yu Tsai
[not found] ` <CAGb2v64fU+n-mrVk=+ox5e-np_oK3ZiVk-YMknriGQsnxOVBvQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-04-11 7:59 ` Lee Jones
2016-04-11 7:59 ` Lee Jones
2016-04-11 7:59 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459243352-23344-4-git-send-email-wens@csie.org \
--to=wens-jday2fn1rrm@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.