* [PATCH 1/4] ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
@ 2016-04-01 0:30 ` Eric Anholt
0 siblings, 0 replies; 14+ messages in thread
From: Eric Anholt @ 2016-04-01 0:30 UTC (permalink / raw)
To: linux-arm-kernel
This approximately triples write performance for the SD card. My card
is too full of important data to collect very reliable numbers, but I
see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'. Read
performance appears to be unaffected.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/configs/bcm2835_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 1ef69fc..1617fd2 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -87,7 +87,7 @@ CONFIG_USB_DWC2=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_MMC_SDHCI_IPROC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
--
2.7.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/4] ARM: bcm2835: Enable CONFIG_PM.
2016-04-01 0:30 ` Eric Anholt
@ 2016-04-01 0:30 ` Eric Anholt
-1 siblings, 0 replies; 14+ messages in thread
From: Eric Anholt @ 2016-04-01 0:30 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: linux-arm-kernel, linux-kernel, Stephen Warren, Lee Jones,
Florian Fainelli, Eric Anholt
The power domain driver we've enabled doesn't actually do anything
without it, and we need it to do its job for VC4 to initialize
successfully.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/configs/bcm2835_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 1617fd2..1192a6f 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -38,6 +38,7 @@ CONFIG_CRASH_DUMP=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
+CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
--
2.7.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/4] ARM: bcm2835: Enable CONFIG_PM.
@ 2016-04-01 0:30 ` Eric Anholt
0 siblings, 0 replies; 14+ messages in thread
From: Eric Anholt @ 2016-04-01 0:30 UTC (permalink / raw)
To: linux-arm-kernel
The power domain driver we've enabled doesn't actually do anything
without it, and we need it to do its job for VC4 to initialize
successfully.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/configs/bcm2835_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 1617fd2..1192a6f 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -38,6 +38,7 @@ CONFIG_CRASH_DUMP=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
+CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
--
2.7.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 2/4] ARM: bcm2835: Enable CONFIG_PM.
2016-04-01 0:30 ` Eric Anholt
@ 2016-04-01 2:05 ` Stephen Warren
-1 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2016-04-01 2:05 UTC (permalink / raw)
To: Eric Anholt
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Lee Jones,
Florian Fainelli
On 03/31/2016 06:30 PM, Eric Anholt wrote:
> The power domain driver we've enabled doesn't actually do anything
> without it, and we need it to do its job for VC4 to initialize
> successfully.
Patches 1, 2, and 3,
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 3/4] ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
2016-04-01 0:30 ` Eric Anholt
@ 2016-04-01 0:30 ` Eric Anholt
-1 siblings, 0 replies; 14+ messages in thread
From: Eric Anholt @ 2016-04-01 0:30 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: linux-arm-kernel, linux-kernel, Stephen Warren, Lee Jones,
Florian Fainelli, Eric Anholt
Combined with the queued DT changes, we now get HDMI and 3D support.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/configs/bcm2835_defconfig | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 1192a6f..896500f 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -64,7 +64,6 @@ CONFIG_INPUT_EVDEV=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y
-CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BCM2835=y
CONFIG_SPI=y
@@ -74,10 +73,10 @@ CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_BCM2835_WDT=y
-CONFIG_FB=y
+CONFIG_DRM=y
+CONFIG_DRM_VC4=y
CONFIG_FB_SIMPLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
--
2.7.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/4] ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
@ 2016-04-01 0:30 ` Eric Anholt
0 siblings, 0 replies; 14+ messages in thread
From: Eric Anholt @ 2016-04-01 0:30 UTC (permalink / raw)
To: linux-arm-kernel
Combined with the queued DT changes, we now get HDMI and 3D support.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/configs/bcm2835_defconfig | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 1192a6f..896500f 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -64,7 +64,6 @@ CONFIG_INPUT_EVDEV=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y
-CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BCM2835=y
CONFIG_SPI=y
@@ -74,10 +73,10 @@ CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_BCM2835_WDT=y
-CONFIG_FB=y
+CONFIG_DRM=y
+CONFIG_DRM_VC4=y
CONFIG_FB_SIMPLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
--
2.7.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 3/4] ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
2016-04-01 0:30 ` Eric Anholt
@ 2016-04-01 2:03 ` Stephen Warren
-1 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2016-04-01 2:03 UTC (permalink / raw)
To: Eric Anholt
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Lee Jones,
Florian Fainelli
On 03/31/2016 06:30 PM, Eric Anholt wrote:
> Combined with the queued DT changes, we now get HDMI and 3D support.
> diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
> CONFIG_FB_SIMPLE=y
Do we need to disable that too, or does hand-off from simplefb to the
accelerated driver work fine?
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 3/4] ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
@ 2016-04-01 2:03 ` Stephen Warren
0 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2016-04-01 2:03 UTC (permalink / raw)
To: linux-arm-kernel
On 03/31/2016 06:30 PM, Eric Anholt wrote:
> Combined with the queued DT changes, we now get HDMI and 3D support.
> diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
> CONFIG_FB_SIMPLE=y
Do we need to disable that too, or does hand-off from simplefb to the
accelerated driver work fine?
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 4/4] ARM: bcm2835: Enable NFS root support.
2016-04-01 0:30 ` Eric Anholt
@ 2016-04-01 0:30 ` Eric Anholt
-1 siblings, 0 replies; 14+ messages in thread
From: Eric Anholt @ 2016-04-01 0:30 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: linux-arm-kernel, linux-kernel, Stephen Warren, Lee Jones,
Florian Fainelli, Eric Anholt
This is also present in multi_v7_defconfig, and means that I can test
the pi1 with the 2835 defconfig in my normal environment.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/configs/bcm2835_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 896500f..79de828 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -43,6 +43,8 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_CFG80211=y
@@ -122,6 +124,7 @@ CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
--
2.7.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 4/4] ARM: bcm2835: Enable NFS root support.
@ 2016-04-01 0:30 ` Eric Anholt
0 siblings, 0 replies; 14+ messages in thread
From: Eric Anholt @ 2016-04-01 0:30 UTC (permalink / raw)
To: linux-arm-kernel
This is also present in multi_v7_defconfig, and means that I can test
the pi1 with the 2835 defconfig in my normal environment.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/configs/bcm2835_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 896500f..79de828 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -43,6 +43,8 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_CFG80211=y
@@ -122,6 +124,7 @@ CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
--
2.7.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 1/4] ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
2016-04-01 0:30 ` Eric Anholt
@ 2016-04-01 16:58 ` Stephen Warren
-1 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2016-04-01 16:58 UTC (permalink / raw)
To: Eric Anholt
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Lee Jones,
Florian Fainelli
On 03/31/2016 06:30 PM, Eric Anholt wrote:
> This approximately triples write performance for the SD card. My card
> is too full of important data to collect very reliable numbers, but I
> see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
> if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'. Read
> performance appears to be unaffected.
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/4] ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
@ 2016-04-01 16:58 ` Stephen Warren
0 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2016-04-01 16:58 UTC (permalink / raw)
To: linux-arm-kernel
On 03/31/2016 06:30 PM, Eric Anholt wrote:
> This approximately triples write performance for the SD card. My card
> is too full of important data to collect very reliable numbers, but I
> see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
> if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'. Read
> performance appears to be unaffected.
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
^ permalink raw reply [flat|nested] 14+ messages in thread