[Qemu-devel] [PULL] slirp updates

[Qemu-devel] [PULL] slirp updates

[Samuel Thibault]

The following changes since commit de1d099a448beb2ec39af4bd9ce4dd6452a18cb5:

  Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault-2' into staging (2016-04-01 11:15:20 +0100)

are available in the git repository at:

  http://people.debian.org/~sthibault/qemu.git tags/samuel-thibault-2

for you to fetch changes up to 0b11c036620251f8f831ab8f0d9a7280ec1c4813:

  slirp: Allow disabling IPv4 or IPv6 (2016-04-01 17:51:55 +0200)

----------------------------------------------------------------
slirp updates (2)

----------------------------------------------------------------
Samuel Thibault (1):
      slirp: Allow disabling IPv4 or IPv6

 net/slirp.c       | 36 ++++++++++++++++++++++++++++++------
 qapi-schema.json  |  8 ++++++++
 qemu-options.hx   |  8 ++++++--
 slirp/ip6_icmp.c  |  8 ++++++++
 slirp/ip6_input.c |  5 +++++
 slirp/ip_input.c  |  4 ++++
 slirp/libslirp.h  |  3 ++-
 slirp/slirp.c     | 10 +++++++++-
 slirp/slirp.h     |  2 ++
 9 files changed, 74 insertions(+), 10 deletions(-)

[Qemu-devel] [PULL] slirp: Allow disabling IPv4 or IPv6

[Samuel Thibault]

Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
 net/slirp.c       | 36 ++++++++++++++++++++++++++++++------
 qapi-schema.json  |  8 ++++++++
 qemu-options.hx   |  8 ++++++--
 slirp/ip6_icmp.c  |  8 ++++++++
 slirp/ip6_input.c |  5 +++++
 slirp/ip_input.c  |  4 ++++
 slirp/libslirp.h  |  3 ++-
 slirp/slirp.c     | 10 +++++++++-
 slirp/slirp.h     |  2 ++
 9 files changed, 74 insertions(+), 10 deletions(-)

diff --git a/net/slirp.c b/net/slirp.c
index 791a8f7..31630f0 100644
--- a/net/slirp.c
+++ b/net/slirp.c
@@ -136,8 +136,8 @@ static NetClientInfo net_slirp_info = {
 
 static int net_slirp_init(NetClientState *peer, const char *model,
                           const char *name, int restricted,
-                          const char *vnetwork, const char *vhost,
-                          const char *vprefix6, int vprefix6_len,
+                          bool ipv4, const char *vnetwork, const char *vhost,
+                          bool ipv6, const char *vprefix6, int vprefix6_len,
                           const char *vhost6,
                           const char *vhostname, const char *tftp_export,
                           const char *bootfile, const char *vdhcp_start,
@@ -165,6 +165,19 @@ static int net_slirp_init(NetClientState *peer, const char *model,
     char *end;
     struct slirp_config_str *config;
 
+    if (!ipv4 && (vnetwork || vhost || vnameserver)) {
+        return -1;
+    }
+
+    if (!ipv6 && (vprefix6 || vhost6 || vnameserver6)) {
+        return -1;
+    }
+
+    if (!ipv4 && !ipv6) {
+        /* It doesn't make sense to disable both */
+        return -1;
+    }
+
     if (!tftp_export) {
         tftp_export = legacy_tftp_prefix;
     }
@@ -309,8 +322,8 @@ static int net_slirp_init(NetClientState *peer, const char *model,
 
     s = DO_UPCAST(SlirpState, nc, nc);
 
-    s->slirp = slirp_init(restricted, net, mask, host,
-                          ip6_prefix, vprefix6_len, ip6_host,
+    s->slirp = slirp_init(restricted, ipv4, net, mask, host,
+                          ipv6, ip6_prefix, vprefix6_len, ip6_host,
                           vhostname, tftp_export, bootfile, dhcp,
                           dns, ip6_dns, dnssearch, s);
     QTAILQ_INSERT_TAIL(&slirp_stacks, s, entry);
@@ -813,10 +826,20 @@ int net_init_slirp(const NetClientOptions *opts, const char *name,
     int ret;
     const NetdevUserOptions *user;
     const char **dnssearch;
+    bool ipv4 = true, ipv6 = true;
 
     assert(opts->type == NET_CLIENT_OPTIONS_KIND_USER);
     user = opts->u.user.data;
 
+    if ((user->has_ipv6 && user->ipv6 && !user->has_ipv4) ||
+        (user->has_ipv4 && !user->ipv4)) {
+        ipv4 = 0;
+    }
+    if ((user->has_ipv4 && user->ipv4 && !user->has_ipv6) ||
+        (user->has_ipv6 && !user->ipv6)) {
+        ipv6 = 0;
+    }
+
     vnet = user->has_net ? g_strdup(user->net) :
            user->has_ip  ? g_strdup_printf("%s/24", user->ip) :
            NULL;
@@ -828,8 +851,9 @@ int net_init_slirp(const NetClientOptions *opts, const char *name,
     net_init_slirp_configs(user->hostfwd, SLIRP_CFG_HOSTFWD);
     net_init_slirp_configs(user->guestfwd, 0);
 
-    ret = net_slirp_init(peer, "user", name, user->q_restrict, vnet,
-                         user->host, user->ipv6_prefix, user->ipv6_prefixlen,
+    ret = net_slirp_init(peer, "user", name, user->q_restrict,
+                         ipv4, vnet, user->host,
+                         ipv6, user->ipv6_prefix, user->ipv6_prefixlen,
                          user->ipv6_host, user->hostname, user->tftp,
                          user->bootfile, user->dhcpstart,
                          user->dns, user->ipv6_dns, user->smb,
diff --git a/qapi-schema.json b/qapi-schema.json
index e58f6a9..54634c4 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -2425,6 +2425,12 @@
 #
 # @restrict: #optional isolate the guest from the host
 #
+# @ipv4: #optional whether to support IPv4, default true for enabled
+#        (since 2.6)
+#
+# @ipv6: #optional whether to support IPv6, default true for enabled
+#        (since 2.6)
+#
 # @ip: #optional legacy parameter, use net= instead
 #
 # @net: #optional IP network address that the guest will see, in the
@@ -2473,6 +2479,8 @@
   'data': {
     '*hostname':  'str',
     '*restrict':  'bool',
+    '*ipv4':      'bool',
+    '*ipv6':      'bool',
     '*ip':        'str',
     '*net':       'str',
     '*host':      'str',
diff --git a/qemu-options.hx b/qemu-options.hx
index a770086..789d9f6 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -1551,8 +1551,9 @@ DEF("smb", HAS_ARG, QEMU_OPTION_smb, "", QEMU_ARCH_ALL)
 
 DEF("netdev", HAS_ARG, QEMU_OPTION_netdev,
 #ifdef CONFIG_SLIRP
-    "-netdev user,id=str[,net=addr[/mask]][,host=addr][,ipv6-net=addr[/int]]\n"
-    "         [,ipv6-host=addr][,restrict=on|off][,hostname=host][,dhcpstart=addr]\n"
+    "-netdev user,id=str[,ipv4[=on|off]][,net=addr[/mask]][,host=addr]\n"
+    "         [,ipv6[=on|off]][,ipv6-net=addr[/int]][,ipv6-host=addr]\n"
+    "         [,restrict=on|off][,hostname=host][,dhcpstart=addr]\n"
     "         [,dns=addr][,ipv6-dns=addr][,dnssearch=domain][,tftp=dir]\n"
     "         [,bootfile=f][,hostfwd=rule][,guestfwd=rule]"
 #ifndef _WIN32
@@ -1701,6 +1702,9 @@ Connect user mode stack to VLAN @var{n} (@var{n} = 0 is the default).
 @itemx name=@var{name}
 Assign symbolic name for use in monitor commands.
 
+@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must
+be enabled.  If neither is specified both protocols are enabled.
+
 @item net=@var{addr}[/@var{mask}]
 Set IP network address the guest will see. Optionally specify the netmask,
 either in the form a.b.c.d or as number of valid top-most bits. Default is
diff --git a/slirp/ip6_icmp.c b/slirp/ip6_icmp.c
index 9d61349..09571bc 100644
--- a/slirp/ip6_icmp.c
+++ b/slirp/ip6_icmp.c
@@ -24,6 +24,10 @@ static void ra_timer_handler(void *opaque)
 
 void icmp6_init(Slirp *slirp)
 {
+    if (!slirp->in6_enabled) {
+        return;
+    }
+
     slirp->ra_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, ra_timer_handler, slirp);
     timer_mod(slirp->ra_timer,
               qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + NDP_Interval);
@@ -31,6 +35,10 @@ void icmp6_init(Slirp *slirp)
 
 void icmp6_cleanup(Slirp *slirp)
 {
+    if (!slirp->in6_enabled) {
+        return;
+    }
+
     timer_del(slirp->ra_timer);
     timer_free(slirp->ra_timer);
 }
diff --git a/slirp/ip6_input.c b/slirp/ip6_input.c
index c0b11e7..ac2e3ea 100644
--- a/slirp/ip6_input.c
+++ b/slirp/ip6_input.c
@@ -24,6 +24,11 @@ void ip6_cleanup(Slirp *slirp)
 void ip6_input(struct mbuf *m)
 {
     struct ip6 *ip6;
+    Slirp *slirp = m->slirp;
+
+    if (!slirp->in6_enabled) {
+        goto bad;
+    }
 
     DEBUG_CALL("ip6_input");
     DEBUG_ARG("m = %lx", (long)m);
diff --git a/slirp/ip_input.c b/slirp/ip_input.c
index b464f6b..cdd5483 100644
--- a/slirp/ip_input.c
+++ b/slirp/ip_input.c
@@ -80,6 +80,10 @@ ip_input(struct mbuf *m)
 	register struct ip *ip;
 	int hlen;
 
+	if (!slirp->in_enabled) {
+		goto bad;
+	}
+
 	DEBUG_CALL("ip_input");
 	DEBUG_ARG("m = %p", m);
 	DEBUG_ARG("m_len = %d", m->m_len);
diff --git a/slirp/libslirp.h b/slirp/libslirp.h
index c4b25c9..127aa41 100644
--- a/slirp/libslirp.h
+++ b/slirp/libslirp.h
@@ -8,8 +8,9 @@ typedef struct Slirp Slirp;
 
 int get_dns_addr(struct in_addr *pdns_addr);
 
-Slirp *slirp_init(int restricted, struct in_addr vnetwork,
+Slirp *slirp_init(int restricted, bool in_enabled, struct in_addr vnetwork,
                   struct in_addr vnetmask, struct in_addr vhost,
+                  bool in6_enabled,
                   struct in6_addr vprefix_addr6, uint8_t vprefix_len,
                   struct in6_addr vhost6, const char *vhostname,
                   const char *tftp_path, const char *bootfile,
diff --git a/slirp/slirp.c b/slirp/slirp.c
index 998f278..fef526c 100644
--- a/slirp/slirp.c
+++ b/slirp/slirp.c
@@ -200,8 +200,9 @@ static void slirp_init_once(void)
 static void slirp_state_save(QEMUFile *f, void *opaque);
 static int slirp_state_load(QEMUFile *f, void *opaque, int version_id);
 
-Slirp *slirp_init(int restricted, struct in_addr vnetwork,
+Slirp *slirp_init(int restricted, bool in_enabled, struct in_addr vnetwork,
                   struct in_addr vnetmask, struct in_addr vhost,
+                  bool in6_enabled,
                   struct in6_addr vprefix_addr6, uint8_t vprefix_len,
                   struct in6_addr vhost6, const char *vhostname,
                   const char *tftp_path, const char *bootfile,
@@ -216,6 +217,9 @@ Slirp *slirp_init(int restricted, struct in_addr vnetwork,
     slirp->grand = g_rand_new();
     slirp->restricted = restricted;
 
+    slirp->in_enabled = in_enabled;
+    slirp->in6_enabled = in6_enabled;
+
     if_init(slirp);
     ip_init(slirp);
     ip6_init(slirp);
@@ -694,6 +698,10 @@ static void arp_input(Slirp *slirp, const uint8_t *pkt, int pkt_len)
     int ar_op;
     struct ex_list *ex_ptr;
 
+    if (!slirp->in_enabled) {
+        return;
+    }
+
     ar_op = ntohs(ah->ar_op);
     switch(ar_op) {
     case ARPOP_REQUEST:
diff --git a/slirp/slirp.h b/slirp/slirp.h
index 1abbcc6..c99ebb9 100644
--- a/slirp/slirp.h
+++ b/slirp/slirp.h
@@ -180,6 +180,8 @@ struct Slirp {
     u_int last_slowtimo;
     bool do_slowtimo;
 
+    bool in_enabled, in6_enabled;
+
     /* virtual network configuration */
     struct in_addr vnetwork_addr;
     struct in_addr vnetwork_mask;
-- 
2.8.0.rc3

Re: [Qemu-devel] [PULL] slirp updates

[Peter Maydell]

On 1 April 2016 at 16:53, Samuel Thibault <samuel.thibault@ens-lyon.org> wrote:
> The following changes since commit de1d099a448beb2ec39af4bd9ce4dd6452a18cb5:
>
>   Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault-2' into staging (2016-04-01 11:15:20 +0100)
>
> are available in the git repository at:
>
>   http://people.debian.org/~sthibault/qemu.git tags/samuel-thibault-2
>
> for you to fetch changes up to 0b11c036620251f8f831ab8f0d9a7280ec1c4813:
>
>   slirp: Allow disabling IPv4 or IPv6 (2016-04-01 17:51:55 +0200)
>
> ----------------------------------------------------------------
> slirp updates (2)
>
> ----------------------------------------------------------------
> Samuel Thibault (1):
>       slirp: Allow disabling IPv4 or IPv6

Applied, thanks.

-- PMM