[fido/master][PATCH] linux-ti-staging 4.1: add PRU Ethernet FW dependency for AM4

[fido/master][PATCH] linux-ti-staging 4.1: add PRU Ethernet FW dependency for AM4

[Denys Dmytriyenko]

From: Denys Dmytriyenko <denys@ti.com>

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
---
 recipes-kernel/linux/linux-ti-staging_4.1.bb | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/recipes-kernel/linux/linux-ti-staging_4.1.bb b/recipes-kernel/linux/linux-ti-staging_4.1.bb
index edc8e00..ea1ed62 100644
--- a/recipes-kernel/linux/linux-ti-staging_4.1.bb
+++ b/recipes-kernel/linux/linux-ti-staging_4.1.bb
@@ -41,6 +41,7 @@ RDEPENDS_kernel-base_append_k2l-evm = " netcp-pa-fw"
 
 # Add run-time dependency for PRU Ethernet firmware to the rootfs
 RDEPENDS_kernel-base_append_am57xx-evm = " prueth-fw"
+RDEPENDS_kernel-base_append_am437x-evm = " prueth-fw"
 
 # Default is to package all dtb files for ti33x devices unless building
 # for the specific beaglebone machine.
@@ -73,7 +74,7 @@ SRCREV = "6b41ca0b945d73ac8c8318083f79411639836643"
 PV = "4.1.18+git${SRCPV}"
 
 # Append to the MACHINE_KERNEL_PR so that a new SRCREV will cause a rebuild
-MACHINE_KERNEL_PR_append = "k"
+MACHINE_KERNEL_PR_append = "l"
 PR = "${MACHINE_KERNEL_PR}"
 
 KERNEL_CONFIG_DIR = "${S}/ti_config_fragments"
-- 
2.2.0

[master][PATCH] linux-ti-staging 4.4: add PRU Ethernet FW dependency for AM4

[Denys Dmytriyenko]

From: Denys Dmytriyenko <denys@ti.com>

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
---
 recipes-kernel/linux/linux-ti-staging_4.4.bb | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/recipes-kernel/linux/linux-ti-staging_4.4.bb b/recipes-kernel/linux/linux-ti-staging_4.4.bb
index ffd074a..8bdec9e 100644
--- a/recipes-kernel/linux/linux-ti-staging_4.4.bb
+++ b/recipes-kernel/linux/linux-ti-staging_4.4.bb
@@ -41,6 +41,7 @@ RDEPENDS_kernel-base_append_k2l-evm = " netcp-pa-fw"
 
 # Add run-time dependency for PRU Ethernet firmware to the rootfs
 RDEPENDS_kernel-base_append_am57xx-evm = " prueth-fw"
+RDEPENDS_kernel-base_append_am437x-evm = " prueth-fw"
 
 # Default is to package all dtb files for ti33x devices unless building
 # for the specific beaglebone machine.
@@ -73,7 +74,7 @@ SRCREV = "08b8a2e93fac2471992ea3e110a3683a00f39d74"
 PV = "4.4.6+git${SRCPV}"
 
 # Append to the MACHINE_KERNEL_PR so that a new SRCREV will cause a rebuild
-MACHINE_KERNEL_PR_append = "a"
+MACHINE_KERNEL_PR_append = "b"
 PR = "${MACHINE_KERNEL_PR}"
 
 KERNEL_CONFIG_DIR = "${S}/ti_config_fragments"
-- 
2.2.0