[PATCH v5 06/21] xen/x86: Improvements to in-hypervisor cpuid sanity checks

[Andrew Cooper <andrew.cooper3@citrix.com>]

Currently, {pv,hvm}_cpuid() has a large quantity of essentially-static logic
for modifying the features visible to a guest.  A lot of this can be subsumed
by {pv,hvm}_featuremask, which identify the features available on this
hardware which could be given to a PV or HVM guest.

This is a step in the direction of full per-domain cpuid policies, but lots
more development is needed for that.  As a result, the static checks are
simplified, but the dynamic checks need to remain for now.

As a side effect, some of the logic for special features can be improved.
OSXSAVE and OSPKE will be automatically cleared because of being absent in the
featuremask.  This allows the fast-forward logic to be more simple.

In addition, there are some corrections to the existing logic:

 * Hiding PSE36 out of PAE mode is architecturally wrong.  It turns out that
   it was a bugfix for running HyperV under Xen, which wanted to see PSE36
   even after choosing to use PAE paging.  PSE36 is not supported by shadow
   paging, so is hidden from non-HAP guests, but is still visible for HAP
   guests.  It is also leaked into non-HAP guests when the guest is already
   running in PAE mode.
 * Changing the visibility of RDTSCP based on host TSC stability or virtual
   TSC mode is bogus, so dropped.
 * When emulating Intel to a guest, the common features in e1d should be
   cleared.
 * The APIC bit in e1d (on non-Intel) is also a fast-forward from the
   APIC_BASE MSR.

As a small improvement, use compiler-visible &'s and |'s, rather than
{clear,set}_bit().

Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
CC: Jan Beulich <JBeulich@suse.com>

v2:
 * Reinstate some of the dynamic checks for now.  Future development work will
   instate a complete per-domain policy.
 * Fix OSXSAVE handling for PV guests.
v3:
 * Better handling of the cross-vendor case.
 * Improvements to the handling of special features.
 * Correct PSE36 to being a HAP-only feature.
 * Yet more OSXSAVE fixes for PV guests.
v4:
 * Leak PSE36 into shadow guests to fix buggy versions of Hyper-V.
 * Leak MTRR into the hardware domain to fix Xenolinux dom0.
 * Change cross-vendor 1D disabling logic.
 * Avoid reading arch.pv_vcpu for PVH guests.
v5:
 * Clarify the commit message regarding PSE36.
 * Drop redundant is_pv_domain().
 * Fix deep-C and P states with modern Linux PVOps on faulting-capable hardware.
---
 xen/arch/x86/hvm/hvm.c           | 125 ++++++++++++-------
 xen/arch/x86/traps.c             | 254 +++++++++++++++++++++++++++------------
 xen/include/asm-x86/cpufeature.h |   2 +
 3 files changed, 263 insertions(+), 118 deletions(-)

diff --git a/xen/arch/x86/hvm/hvm.c b/xen/arch/x86/hvm/hvm.c
index b239f74..9ce61cc 100644
--- a/xen/arch/x86/hvm/hvm.c
+++ b/xen/arch/x86/hvm/hvm.c
@@ -72,6 +72,7 @@
 #include <public/memory.h>
 #include <public/vm_event.h>
 #include <public/arch-x86/cpuid.h>
+#include <asm/cpuid.h>
 
 bool_t __read_mostly hvm_enabled;
 
@@ -3358,62 +3359,71 @@ void hvm_cpuid(unsigned int input, unsigned int *eax, unsigned int *ebx,
         /* Fix up VLAPIC details. */
         *ebx &= 0x00FFFFFFu;
         *ebx |= (v->vcpu_id * 2) << 24;
+
+        *ecx &= hvm_featureset[FEATURESET_1c];
+        *edx &= hvm_featureset[FEATURESET_1d];
+
+        /* APIC exposed to guests, but Fast-forward MSR_APIC_BASE.EN back in. */
         if ( vlapic_hw_disabled(vcpu_vlapic(v)) )
-            __clear_bit(X86_FEATURE_APIC & 31, edx);
+            *edx &= ~cpufeat_bit(X86_FEATURE_APIC);
 
-        /* Fix up OSXSAVE. */
-        if ( *ecx & cpufeat_mask(X86_FEATURE_XSAVE) &&
-             (v->arch.hvm_vcpu.guest_cr[4] & X86_CR4_OSXSAVE) )
+        /* OSXSAVE cleared by hvm_featureset.  Fast-forward CR4 back in. */
+        if ( v->arch.hvm_vcpu.guest_cr[4] & X86_CR4_OSXSAVE )
             *ecx |= cpufeat_mask(X86_FEATURE_OSXSAVE);
-        else
-            *ecx &= ~cpufeat_mask(X86_FEATURE_OSXSAVE);
 
-        /* Don't expose PCID to non-hap hvm. */
+        /* Don't expose HAP-only features to non-hap guests. */
         if ( !hap_enabled(d) )
+        {
             *ecx &= ~cpufeat_mask(X86_FEATURE_PCID);
 
-        /* Only provide PSE36 when guest runs in 32bit PAE or in long mode */
-        if ( !(hvm_pae_enabled(v) || hvm_long_mode_enabled(v)) )
-            *edx &= ~cpufeat_mask(X86_FEATURE_PSE36);
+            /*
+             * PSE36 is not supported in shadow mode.  This bit should be
+             * unilaterally cleared.
+             *
+             * However, an unspecified version of Hyper-V from 2011 refuses
+             * to start as the "cpu does not provide required hw features" if
+             * it can't see PSE36.
+             *
+             * As a workaround, leak the toolstack-provided PSE36 value into a
+             * shadow guest if the guest is already using PAE paging (and
+             * won't care about reverting back to PSE paging).  Otherwise,
+             * knoble it, so a 32bit guest doesn't get the impression that it
+             * could try to use PSE36 paging.
+             */
+            if ( !(hvm_pae_enabled(v) || hvm_long_mode_enabled(v)) )
+                *edx &= ~cpufeat_mask(X86_FEATURE_PSE36);
+        }
         break;
+
     case 0x7:
         if ( count == 0 )
         {
-            if ( !cpu_has_smep )
-                *ebx &= ~cpufeat_mask(X86_FEATURE_SMEP);
-
-            if ( !cpu_has_smap )
-                *ebx &= ~cpufeat_mask(X86_FEATURE_SMAP);
+            /* Fold host's FDP_EXCP_ONLY and NO_FPU_SEL into guest's view. */
+            *ebx &= (hvm_featureset[FEATURESET_7b0] &
+                     ~special_features[FEATURESET_7b0]);
+            *ebx |= (host_featureset[FEATURESET_7b0] &
+                     special_features[FEATURESET_7b0]);
 
-            /* Don't expose MPX to hvm when VMX support is not available. */
-            if ( !(vmx_vmexit_control & VM_EXIT_CLEAR_BNDCFGS) ||
-                 !(vmx_vmentry_control & VM_ENTRY_LOAD_BNDCFGS) )
-                *ebx &= ~cpufeat_mask(X86_FEATURE_MPX);
+            *ecx &= hvm_featureset[FEATURESET_7c0];
 
+            /* Don't expose HAP-only features to non-hap guests. */
             if ( !hap_enabled(d) )
             {
-                 /* Don't expose INVPCID to non-hap hvm. */
                  *ebx &= ~cpufeat_mask(X86_FEATURE_INVPCID);
-                 /* X86_FEATURE_PKU is not yet implemented for shadow paging. */
                  *ecx &= ~cpufeat_mask(X86_FEATURE_PKU);
             }
 
-            if ( (*ecx & cpufeat_mask(X86_FEATURE_PKU)) &&
-                 (v->arch.hvm_vcpu.guest_cr[4] & X86_CR4_PKE) )
+            /* OSPKE cleared by hvm_featureset.  Fast-forward CR4 back in. */
+            if ( v->arch.hvm_vcpu.guest_cr[4] & X86_CR4_PKE )
                 *ecx |= cpufeat_mask(X86_FEATURE_OSPKE);
-            else
-                *ecx &= ~cpufeat_mask(X86_FEATURE_OSPKE);
-
-            /* Don't expose PCOMMIT to hvm when VMX support is not available. */
-            if ( !cpu_has_vmx_pcommit )
-                *ebx &= ~cpufeat_mask(X86_FEATURE_PCOMMIT);
         }
-
         break;
+
     case 0xb:
         /* Fix the x2APIC identifier. */
         *edx = v->vcpu_id * 2;
         break;
+
     case 0xd:
         /* EBX value of main leaf 0 depends on enabled xsave features */
         if ( count == 0 && v->arch.xcr0 ) 
@@ -3430,9 +3440,12 @@ void hvm_cpuid(unsigned int input, unsigned int *eax, unsigned int *ebx,
                     *ebx = _eax + _ebx;
             }
         }
+
         if ( count == 1 )
         {
-            if ( cpu_has_xsaves && cpu_has_vmx_xsaves )
+            *eax &= hvm_featureset[FEATURESET_Da1];
+
+            if ( *eax & cpufeat_mask(X86_FEATURE_XSAVES) )
             {
                 *ebx = XSTATE_AREA_MIN_SIZE;
                 if ( v->arch.xcr0 | v->arch.hvm_vcpu.msr_xss )
@@ -3447,20 +3460,42 @@ void hvm_cpuid(unsigned int input, unsigned int *eax, unsigned int *ebx,
         break;
 
     case 0x80000001:
-        /* We expose RDTSCP feature to guest only when
-           tsc_mode == TSC_MODE_DEFAULT and host_tsc_is_safe() returns 1 */
-        if ( d->arch.tsc_mode != TSC_MODE_DEFAULT ||
-             !host_tsc_is_safe() )
-            *edx &= ~cpufeat_mask(X86_FEATURE_RDTSCP);
-        /* Hide 1GB-superpage feature if we can't emulate it. */
-        if (!hvm_pse1gb_supported(d))
+        *ecx &= hvm_featureset[FEATURESET_e1c];
+        *edx &= hvm_featureset[FEATURESET_e1d];
+
+        /* If not emulating AMD, clear the duplicated features in e1d. */
+        if ( d->arch.x86_vendor != X86_VENDOR_AMD )
+            *edx &= ~CPUID_COMMON_1D_FEATURES;
+        /* fast-forward MSR_APIC_BASE.EN if it hasn't already been clobbered. */
+        else if ( vlapic_hw_disabled(vcpu_vlapic(v)) )
+            *edx &= ~cpufeat_bit(X86_FEATURE_APIC);
+
+        /* Don't expose HAP-only features to non-hap guests. */
+        if ( !hap_enabled(d) )
+        {
             *edx &= ~cpufeat_mask(X86_FEATURE_PAGE1GB);
-        /* Only provide PSE36 when guest runs in 32bit PAE or in long mode */
-        if ( !(hvm_pae_enabled(v) || hvm_long_mode_enabled(v)) )
-            *edx &= ~cpufeat_mask(X86_FEATURE_PSE36);
-        /* Hide data breakpoint extensions if the hardware has no support. */
-        if ( !boot_cpu_has(X86_FEATURE_DBEXT) )
-            *ecx &= ~cpufeat_mask(X86_FEATURE_DBEXT);
+
+            /*
+             * PSE36 is not supported in shadow mode.  This bit should be
+             * unilaterally cleared.
+             *
+             * However, an unspecified version of Hyper-V from 2011 refuses
+             * to start as the "cpu does not provide required hw features" if
+             * it can't see PSE36.
+             *
+             * As a workaround, leak the toolstack-provided PSE36 value into a
+             * shadow guest if the guest is already using PAE paging (and
+             * won't care about reverting back to PSE paging).  Otherwise,
+             * knoble it, so a 32bit guest doesn't get the impression that it
+             * could try to use PSE36 paging.
+             */
+            if ( !(hvm_pae_enabled(v) || hvm_long_mode_enabled(v)) )
+                *edx &= ~cpufeat_mask(X86_FEATURE_PSE36);
+        }
+        break;
+
+    case 0x80000007:
+        *edx &= hvm_featureset[FEATURESET_e7d];
         break;
 
     case 0x80000008:
@@ -3478,6 +3513,8 @@ void hvm_cpuid(unsigned int input, unsigned int *eax, unsigned int *ebx,
         hvm_cpuid(0x80000001, NULL, NULL, NULL, &_edx);
         *eax = (*eax & ~0xffff00) | (_edx & cpufeat_mask(X86_FEATURE_LM)
                                      ? 0x3000 : 0x2000);
+
+        *ebx &= hvm_featureset[FEATURESET_e8b];
         break;
     }
 }
diff --git a/xen/arch/x86/traps.c b/xen/arch/x86/traps.c
index 6fbb1cf..bd2f67b 100644
--- a/xen/arch/x86/traps.c
+++ b/xen/arch/x86/traps.c
@@ -73,6 +73,7 @@
 #include <asm/hpet.h>
 #include <asm/vpmu.h>
 #include <public/arch-x86/cpuid.h>
+#include <asm/cpuid.h>
 #include <xsm/xsm.h>
 
 /*
@@ -932,69 +933,162 @@ void pv_cpuid(struct cpu_user_regs *regs)
     else
         cpuid_count(leaf, subleaf, &a, &b, &c, &d);
 
-    if ( (leaf & 0x7fffffff) == 0x00000001 )
-    {
-        /* Modify Feature Information. */
-        if ( !cpu_has_apic )
-            __clear_bit(X86_FEATURE_APIC, &d);
-
-        if ( !is_pvh_domain(currd) )
-        {
-            __clear_bit(X86_FEATURE_PSE, &d);
-            __clear_bit(X86_FEATURE_PGE, &d);
-            __clear_bit(X86_FEATURE_PSE36, &d);
-            __clear_bit(X86_FEATURE_VME, &d);
-        }
-    }
-
     switch ( leaf )
     {
     case 0x00000001:
-        /* Modify Feature Information. */
-        if ( !cpu_has_sep )
-            __clear_bit(X86_FEATURE_SEP, &d);
-        __clear_bit(X86_FEATURE_DS, &d);
-        __clear_bit(X86_FEATURE_TM1, &d);
-        __clear_bit(X86_FEATURE_PBE, &d);
-        if ( is_pvh_domain(currd) )
-            __clear_bit(X86_FEATURE_MTRR, &d);
-
-        __clear_bit(X86_FEATURE_DTES64 % 32, &c);
-        __clear_bit(X86_FEATURE_MONITOR % 32, &c);
-        __clear_bit(X86_FEATURE_DSCPL % 32, &c);
-        __clear_bit(X86_FEATURE_VMX % 32, &c);
-        __clear_bit(X86_FEATURE_SMX % 32, &c);
-        __clear_bit(X86_FEATURE_TM2 % 32, &c);
+        c &= pv_featureset[FEATURESET_1c];
+        d &= pv_featureset[FEATURESET_1d];
+
         if ( is_pv_32bit_domain(currd) )
-            __clear_bit(X86_FEATURE_CX16 % 32, &c);
-        __clear_bit(X86_FEATURE_XTPR % 32, &c);
-        __clear_bit(X86_FEATURE_PDCM % 32, &c);
-        __clear_bit(X86_FEATURE_PCID % 32, &c);
-        __clear_bit(X86_FEATURE_DCA % 32, &c);
-        if ( !cpu_has_xsave )
+            c &= ~cpufeat_mask(X86_FEATURE_CX16);
+
+        if ( !is_pvh_domain(currd) )
         {
-            __clear_bit(X86_FEATURE_XSAVE % 32, &c);
-            __clear_bit(X86_FEATURE_AVX % 32, &c);
+            /*
+             * Delete the PVH condition when HVMLite formally replaces PVH,
+             * and HVM guests no longer enter a PV codepath.
+             */
+
+            /*
+             * !!! OSXSAVE handling for PV guests is non-architectural !!!
+             *
+             * Architecturally, the correct code here is simply:
+             *
+             *   if ( curr->arch.pv_vcpu.ctrlreg[4] & X86_CR4_OSXSAVE )
+             *       c |= cpufeat_mask(X86_FEATURE_OSXSAVE);
+             *
+             * However because of bugs in Xen (before c/s bd19080b, Nov 2010,
+             * the XSAVE cpuid flag leaked into guests despite the feature not
+             * being available for use), buggy workarounds where introduced to
+             * Linux (c/s 947ccf9c, also Nov 2010) which relied on the fact
+             * that Xen also incorrectly leaked OSXSAVE into the guest.
+             *
+             * Furthermore, providing architectural OSXSAVE behaviour to a
+             * many Linux PV guests triggered a further kernel bug when the
+             * fpu code observes that XSAVEOPT is available, assumes that
+             * xsave state had been set up for the task, and follows a wild
+             * pointer.
+             *
+             * Older Linux PVOPS kernels however do require architectural
+             * behaviour.  They observe Xen's leaked OSXSAVE and assume they
+             * can already use XSETBV, dying with a #UD because the shadowed
+             * CR4.OSXSAVE is clear.  This behaviour has been adjusted in all
+             * observed cases via stable backports of the above changeset.
+             *
+             * Therefore, the leaking of Xen's OSXSAVE setting has become a
+             * defacto part of the PV ABI and can't reasonably be corrected.
+             *
+             * The following situations and logic now applies:
+             *
+             * - Hardware without CPUID faulting support and native CPUID:
+             *    There is nothing Xen can do here.  The hosts XSAVE flag will
+             *    leak through and Xen's OSXSAVE choice will leak through.
+             *
+             *    In the case that the guest kernel has not set up OSXSAVE, only
+             *    SSE will be set in xcr0, and guest userspace can't do too much
+             *    damage itself.
+             *
+             * - Enlightened CPUID or CPUID faulting available:
+             *    Xen can fully control what is seen here.  Guest kernels need
+             *    to see the leaked OSXSAVE, but guest userspace is given
+             *    architectural behaviour, to reflect the guest kernels
+             *    intentions.
+             */
+            /* OSXSAVE cleared by pv_featureset.  Fast-forward CR4 back in. */
+            if ( (guest_kernel_mode(curr, regs) &&
+                  (read_cr4() & X86_CR4_OSXSAVE)) ||
+                 (curr->arch.pv_vcpu.ctrlreg[4] & X86_CR4_OSXSAVE) )
+                c |= cpufeat_mask(X86_FEATURE_OSXSAVE);
+
+            /*
+             * At the time of writing, a PV domain is the only viable option
+             * for Dom0.  Several interactions between dom0 and Xen for real
+             * hardware setup have unfortunately been implemented based on
+             * state which incorrectly leaked into dom0.
+             *
+             * These leaks are retained for backwards compatibility, but
+             * restricted to the hardware domains kernel only.
+             */
+            if ( is_hardware_domain(currd) && guest_kernel_mode(curr, regs) )
+            {
+                /*
+                 * MTRR used to unconditionally leak into PV guests.  They
+                 * cannot MTRR infrastructure at all, and shouldn't be able to
+                 * see the feature.
+                 *
+                 * Modern PVOPS Linux self-clobbers the MTRR feature, to avoid
+                 * trying to use the associated MSRs.  Xenolinux-based PV dom0's
+                 * however use the MTRR feature as an indication of the presence
+                 * of the XENPF_{add,del,read}_memtype hypercalls.
+                 */
+                if ( cpu_has_mtrr )
+                    d |= cpufeat_mask(X86_FEATURE_MTRR);
+
+                /*
+                 * MONITOR never leaked into PV guests, as PV guests cannot
+                 * use the MONITOR/MWAIT instructions.  As such, they require
+                 * the feature to not being present in emulated CPUID.
+                 *
+                 * Modern PVOPS Linux try to be cunning and use native CPUID
+                 * to see if the hardware actually supports MONITOR, and by
+                 * extension, deep C states.
+                 *
+                 * If the feature is seen, deep-C state information is
+                 * obtained from the DSDT and handed back to Xen via the
+                 * XENPF_set_processor_pminfo hypercall.
+                 *
+                 * This mechanism is incompatible with an HVM-based hardware
+                 * domain, and also with CPUID Faulting.
+                 *
+                 * Luckily, Xen can be just as 'cunning', and distinguish an
+                 * emulated CPUID from a faulted CPUID by whether a #UD or #GP
+                 * fault is currently being serviced.  Yuck...
+                 */
+                if ( cpu_has_monitor && regs->entry_vector == TRAP_gp_fault )
+                    c |= cpufeat_mask(X86_FEATURE_MONITOR);
+
+                /*
+                 * While MONITOR never leaked into PV guests, EIST always used
+                 * to.
+                 *
+                 * Modern PVOPS will only parse P state information from the
+                 * DSDT and return it to Xen if EIST is seen in the emulated
+                 * CPUID information.
+                 */
+                if ( cpu_has_eist )
+                    c |= cpufeat_mask(X86_FEATURE_EIST);
+            }
         }
-        if ( !cpu_has_apic )
-           __clear_bit(X86_FEATURE_X2APIC % 32, &c);
-        __set_bit(X86_FEATURE_HYPERVISOR % 32, &c);
+
+        c |= cpufeat_mask(X86_FEATURE_HYPERVISOR);
         break;
 
     case 0x00000007:
         if ( subleaf == 0 )
-            b &= (cpufeat_mask(X86_FEATURE_BMI1) |
-                  cpufeat_mask(X86_FEATURE_HLE)  |
-                  cpufeat_mask(X86_FEATURE_AVX2) |
-                  cpufeat_mask(X86_FEATURE_BMI2) |
-                  cpufeat_mask(X86_FEATURE_ERMS) |
-                  cpufeat_mask(X86_FEATURE_RTM)  |
-                  cpufeat_mask(X86_FEATURE_RDSEED)  |
-                  cpufeat_mask(X86_FEATURE_ADX)  |
-                  cpufeat_mask(X86_FEATURE_FSGSBASE));
+        {
+            /* Fold host's FDP_EXCP_ONLY and NO_FPU_SEL into guest's view. */
+            b &= (pv_featureset[FEATURESET_7b0] &
+                  ~special_features[FEATURESET_7b0]);
+            b |= (host_featureset[FEATURESET_7b0] &
+                  special_features[FEATURESET_7b0]);
+
+            c &= pv_featureset[FEATURESET_7c0];
+
+            if ( !is_pvh_domain(currd) )
+            {
+                /*
+                 * Delete the PVH condition when HVMLite formally replaces PVH,
+                 * and HVM guests no longer enter a PV codepath.
+                 */
+
+                /* OSPKE cleared by pv_featureset.  Fast-forward CR4 back in. */
+                if ( curr->arch.pv_vcpu.ctrlreg[4] & X86_CR4_PKE )
+                    c |= cpufeat_mask(X86_FEATURE_OSPKE);
+            }
+        }
         else
-            b = 0;
-        a = c = d = 0;
+            b = c = 0;
+        a = d = 0;
         break;
 
     case XSTATE_CPUID:
@@ -1017,37 +1111,49 @@ void pv_cpuid(struct cpu_user_regs *regs)
         }
 
         case 1:
-            a &= (boot_cpu_data.x86_capability[cpufeat_word(X86_FEATURE_XSAVEOPT)] &
-                  ~cpufeat_mask(X86_FEATURE_XSAVES));
+            a &= pv_featureset[FEATURESET_Da1];
             b = c = d = 0;
             break;
         }
         break;
 
     case 0x80000001:
-        /* Modify Feature Information. */
+        c &= pv_featureset[FEATURESET_e1c];
+        d &= pv_featureset[FEATURESET_e1d];
+
+        /* If not emulating AMD, clear the duplicated features in e1d. */
+        if ( currd->arch.x86_vendor != X86_VENDOR_AMD )
+            d &= ~CPUID_COMMON_1D_FEATURES;
+
+        /*
+         * MTRR used to unconditionally leak into PV guests.  They cannot MTRR
+         * infrastructure at all, and shouldn't be able to see the feature.
+         *
+         * Modern PVOPS Linux self-clobbers the MTRR feature, to avoid trying
+         * to use the associated MSRs.  Xenolinux-based PV dom0's however use
+         * the MTRR feature as an indication of the presence of the
+         * XENPF_{add,del,read}_memtype hypercalls.
+         */
+        if ( is_hardware_domain(currd) && guest_kernel_mode(curr, regs) &&
+             cpu_has_mtrr )
+            d |= cpufeat_mask(X86_FEATURE_MTRR);
+
         if ( is_pv_32bit_domain(currd) )
         {
-            __clear_bit(X86_FEATURE_LM % 32, &d);
-            __clear_bit(X86_FEATURE_LAHF_LM % 32, &c);
+            d &= ~cpufeat_mask(X86_FEATURE_LM);
+            c &= ~cpufeat_mask(X86_FEATURE_LAHF_LM);
+
+            if ( boot_cpu_data.x86_vendor != X86_VENDOR_AMD )
+                d &= ~cpufeat_mask(X86_FEATURE_SYSCALL);
         }
-        if ( is_pv_32bit_domain(currd) &&
-             boot_cpu_data.x86_vendor != X86_VENDOR_AMD )
-            __clear_bit(X86_FEATURE_SYSCALL % 32, &d);
-        __clear_bit(X86_FEATURE_PAGE1GB % 32, &d);
-        __clear_bit(X86_FEATURE_RDTSCP % 32, &d);
-
-        __clear_bit(X86_FEATURE_SVM % 32, &c);
-        if ( !cpu_has_apic )
-           __clear_bit(X86_FEATURE_EXTAPIC % 32, &c);
-        __clear_bit(X86_FEATURE_OSVW % 32, &c);
-        __clear_bit(X86_FEATURE_IBS % 32, &c);
-        __clear_bit(X86_FEATURE_SKINIT % 32, &c);
-        __clear_bit(X86_FEATURE_WDT % 32, &c);
-        __clear_bit(X86_FEATURE_LWP % 32, &c);
-        __clear_bit(X86_FEATURE_NODEID_MSR % 32, &c);
-        __clear_bit(X86_FEATURE_TOPOEXT % 32, &c);
-        __clear_bit(X86_FEATURE_MONITORX % 32, &c);
+        break;
+
+    case 0x80000007:
+        d &= pv_featureset[FEATURESET_e7d];
+        break;
+
+    case 0x80000008:
+        b &= pv_featureset[FEATURESET_e8b];
         break;
 
     case 0x0000000a: /* Architectural Performance Monitor Features (Intel) */
diff --git a/xen/include/asm-x86/cpufeature.h b/xen/include/asm-x86/cpufeature.h
index e29b024..6a08579 100644
--- a/xen/include/asm-x86/cpufeature.h
+++ b/xen/include/asm-x86/cpufeature.h
@@ -81,6 +81,8 @@
 #define cpu_has_xsavec		boot_cpu_has(X86_FEATURE_XSAVEC)
 #define cpu_has_xgetbv1		boot_cpu_has(X86_FEATURE_XGETBV1)
 #define cpu_has_xsaves		boot_cpu_has(X86_FEATURE_XSAVES)
+#define cpu_has_monitor		boot_cpu_has(X86_FEATURE_MONITOR)
+#define cpu_has_eist		boot_cpu_has(X86_FEATURE_EIST)
 
 enum _cache_type {
     CACHE_TYPE_NULL = 0,
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel