[PATCH 0/2] arm64: hisilicon: add support hip06 d03 board

[PATCH 0/2] arm64: hisilicon: add support hip06 d03 board

[Kefeng Wang]

Add initial dts for Hip06 D03 board and documentation.

The Hip06 soc has same cpu topology compared with Hip05, four clusters
and each cluster has quard Cortex-A57, but with different IO part,
like HNS, SAS and PCI, they are all upgraded. There are also not same
in ITS, MBIGEN and SMMU, etc.

Note, there is no serial, because the soc use LPC uart, the serial node
is not needed.

Kefeng Wang (2):
  arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
  Documentation: arm64: Add Hisilicon Hip06 D03 dts binding

 .../bindings/arm/hisilicon/hisilicon.txt           |  20 +-
 arch/arm64/boot/dts/hisilicon/Makefile             |   4 +-
 arch/arm64/boot/dts/hisilicon/hip06-d03.dts        |  34 +++
 arch/arm64/boot/dts/hisilicon/hip06.dtsi           | 307 +++++++++++++++++++++
 4 files changed, 356 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hip06-d03.dts
 create mode 100644 arch/arm64/boot/dts/hisilicon/hip06.dtsi

-- 
1.7.12.4

[PATCH 1/2] arm64: dts: Add initial dts for Hisilicon Hip06 D03 board

[Kefeng Wang]

The Hip06 soc has same cpu topology compared with Hip05, four clusters
and each cluster has quard Cortex-A57, but with different IO part,
like HNS, SAS and PCI, they are all upgraded. There are also not same
in ITS, MBIGEN and SMMU, etc.

This patch adds the initial dts for hip06 d03 board.

Note, there is no serial, because the soc use LPC uart, the serial node
is not needed.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/Makefile      |   4 +-
 arch/arm64/boot/dts/hisilicon/hip06-d03.dts |  34 +++
 arch/arm64/boot/dts/hisilicon/hip06.dtsi    | 307 ++++++++++++++++++++++++++++
 3 files changed, 344 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hip06-d03.dts
 create mode 100644 arch/arm64/boot/dts/hisilicon/hip06.dtsi

diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index cd158b8..d5f43a0 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,4 +1,6 @@
-dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
new file mode 100644
index 0000000..f3e5323
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -0,0 +1,34 @@
+/**
+ * dts file for Hisilicon D03 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip06.dtsi"
+
+/ {
+	model = "Hisilicon Hip06 D03 Development Board";
+	compatible = "hisilicon,hip06-d03";
+
+	memory at 00000000 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;
+	};
+
+	chosen { };
+};
+
+&usb_ohci {
+	status = "ok";
+};
+
+&usb_ehci {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
new file mode 100644
index 0000000..5927bc4
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -0,0 +1,307 @@
+/**
+ * dts file for Hisilicon D03 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip06-d03";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+		};
+
+		cpu0: cpu at 10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu at 10001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu at 10002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu3: cpu at 10003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu4: cpu at 10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu5: cpu at 10101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu6: cpu at 10102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu7: cpu at 10103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu8: cpu at 10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu9: cpu at 10201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu10: cpu at 10202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu11: cpu at 10203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu12: cpu at 10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu13: cpu at 10301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu14: cpu at 10302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu15: cpu at 10303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x10303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller at 4d000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		redistributor-stride = <0x0 0x30000>;
+		reg = <0x0 0x4d000000 0 0x10000>,	/* GICD */
+		      <0x0 0x4d100000 0 0x300000>,	/* GICR */
+		      <0x0 0xfe000000 0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0 0x10000>,       /* GICH */
+		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its_dsa: interrupt-controller at c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	mbigen_pcie at a0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+
+		mbigen_usb: intc_usb {
+			msi-parent = <&its_dsa 0x40080>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb_ohci: ohci at a7030000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0xa7030000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <64 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb_ehci: ehci at a7020000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0xa7020000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <65 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+	};
+
+};
-- 
1.7.12.4

[PATCH 2/2] Documentation: arm64: Add Hisilicon Hip06 D03 dts binding

[Kefeng Wang]

This patch adds documentation for the devicetree bindings used by
the DT files of Hisilicon Hip06 D03 board.

Meanwhile, reorder the soc/board name alphabetically.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 .../devicetree/bindings/arm/hisilicon/hisilicon.txt  | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index e3ccab1..83fe816 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -1,29 +1,33 @@
 Hisilicon Platforms Device Tree Bindings
 ----------------------------------------------------
-Hi6220 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi6220";
-
 Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";
 
-HiP04 D01 Board
+Hi6220 SoC
 Required root node properties:
-	- compatible = "hisilicon,hip04-d01";
+	- compatible = "hisilicon,hi6220";
+
+HiKey Board
+Required root node properties:
+	- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
 
 HiP01 ca9x2 Board
 Required root node properties:
 	- compatible = "hisilicon,hip01-ca9x2";
 
-HiKey Board
+HiP04 D01 Board
 Required root node properties:
-	- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+	- compatible = "hisilicon,hip04-d01";
 
 HiP05 D02 Board
 Required root node properties:
 	- compatible = "hisilicon,hip05-d02";
 
+HiP06 D03 Board
+Required root node properties:
+	- compatible = "hisilicon,hip06-d03";
+
 Hisilicon system controller
 
 Required properties:
-- 
1.7.12.4

[PATCH 0/2] arm64: hisilicon: add support hip06 d03 board

[Wei Xu]

Hi Kefeng,

On 08/04/2016 08:27, Kefeng Wang wrote:
> Add initial dts for Hip06 D03 board and documentation.
> 
> The Hip06 soc has same cpu topology compared with Hip05, four clusters
> and each cluster has quard Cortex-A57, but with different IO part,
> like HNS, SAS and PCI, they are all upgraded. There are also not same
> in ITS, MBIGEN and SMMU, etc.
> 
> Note, there is no serial, because the soc use LPC uart, the serial node
> is not needed.
> 
> Kefeng Wang (2):
>   arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
>   Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
> 
>  .../bindings/arm/hisilicon/hisilicon.txt           |  20 +-
>  arch/arm64/boot/dts/hisilicon/Makefile             |   4 +-
>  arch/arm64/boot/dts/hisilicon/hip06-d03.dts        |  34 +++
>  arch/arm64/boot/dts/hisilicon/hip06.dtsi           | 307 +++++++++++++++++++++
>  4 files changed, 356 insertions(+), 9 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/hisilicon/hip06-d03.dts
>  create mode 100644 arch/arm64/boot/dts/hisilicon/hip06.dtsi
> 

Thanks!
Applied both to the hisilicon soc tree.

Best Regards,
Wei