[PATCH v2 1/6] usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host

[PATCH v2 1/6] usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host

[Mathias Nyman]

From: Rafal Redzimski <rafal.f.redzimski@intel.com>

Broxton B0 also requires XHCI_PME_STUCK_QUIRK.
Adding PCI device ID for Broxton B and adding to quirk.

Cc: <stable@vger.kernel.org>
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-pci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index f0640b7..071b34a 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -48,6 +48,7 @@
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
 #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI		0x0aa8
+#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI		0x1aa8
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -155,7 +156,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
 		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
 		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
-		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI)) {
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) {
 		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-- 
1.9.1

[PATCH v2 2/6] xhci: resume USB 3 roothub first

[Mathias Nyman]

Give USB3 devices a better chance to enumerate at USB 3 speeds if
they are connected to a suspended host.
Solves an issue with NEC uPD720200 host hanging when partially
enumerating a USB3 device as USB2 after host controller runtime resume.

Cc: <stable@vger.kernel.org>
Tested-by: Mike Murdoch <main.haarp@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index d51ee0c..b609288 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1108,8 +1108,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		/* Resume root hubs only when have pending events. */
 		status = readl(&xhci->op_regs->status);
 		if (status & STS_EINT) {
-			usb_hcd_resume_root_hub(hcd);
 			usb_hcd_resume_root_hub(xhci->shared_hcd);
+			usb_hcd_resume_root_hub(hcd);
 		}
 	}
 
@@ -1124,10 +1124,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* Re-enable port polling. */
 	xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
-	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-	usb_hcd_poll_rh_status(hcd);
 	set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
 	usb_hcd_poll_rh_status(xhci->shared_hcd);
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
 
 	return retval;
 }
-- 
1.9.1

[PATCH v2 3/6] usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT

[Mathias Nyman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) of
HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit
address memory pointers actually. So, in this case, this driver should
call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in xhci_gen_setup().
Otherwise, the xHCI controller will be died after a usb device is
connected if it runs on above 4GB physical memory environment.

So, this patch adds a new quirk XHCI_NO_64BIT_SUPPORT to resolve
such an issue.

Cc: <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 10 ++++++++++
 drivers/usb/host/xhci.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b609288..9283d333 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4948,6 +4948,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 		return retval;
 	xhci_dbg(xhci, "Reset complete\n");
 
+	/*
+	 * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0)
+	 * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit
+	 * address memory pointers actually. So, this driver clears the AC64
+	 * bit of xhci->hcc_params to call dma_set_coherent_mask(dev,
+	 * DMA_BIT_MASK(32)) in this xhci_gen_setup().
+	 */
+	if (xhci->quirks & XHCI_NO_64BIT_SUPPORT)
+		xhci->hcc_params &= ~BIT(0);
+
 	/* Set dma_mask and coherent_dma_mask to 64-bits,
 	 * if xHC supports 64-bit addressing */
 	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e293e09..70f215c 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1641,6 +1641,7 @@ struct xhci_hcd {
 #define XHCI_PME_STUCK_QUIRK	(1 << 20)
 #define XHCI_MTK_HOST		(1 << 21)
 #define XHCI_SSIC_PORT_UNUSED	(1 << 22)
+#define XHCI_NO_64BIT_SUPPORT	(1 << 23)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
-- 
1.9.1

[PATCH v2 4/6] usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys

[Mathias Nyman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

This patch fixes an issue that cannot work if R-Car Gen2/3 run on
above 4GB physical memory environment to use a quirk XHCI_NO_64BIT_SUPPORT.

Cc: <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-plat.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 5c15e9b..474b5fa 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -39,12 +39,25 @@ static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
 
 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+
 	/*
 	 * As of now platform drivers don't provide MSI support so we ensure
 	 * here that the generic code does not try to make a pci_dev from our
 	 * dev struct in order to setup MSI
 	 */
 	xhci->quirks |= XHCI_PLAT;
+
+	/*
+	 * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
+	 * to 1. However, these SoCs don't support 64-bit address memory
+	 * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
+	 * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
+	 * xhci_gen_setup().
+	 */
+	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
+	    xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3))
+		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 }
 
 /* called during probe() after chip reset completes */
-- 
1.9.1

[PATCH v2 5/6] usb: xhci: fix wild pointers in xhci_mem_cleanup

[Mathias Nyman]

From: Lu Baolu <baolu.lu@linux.intel.com>

This patch fixes some wild pointers produced by xhci_mem_cleanup.
These wild pointers will cause system crash if xhci_mem_cleanup()
is called twice.

Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-mem.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 80c1de2..bad0d1f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1861,6 +1861,12 @@ no_bw:
 	kfree(xhci->rh_bw);
 	kfree(xhci->ext_caps);
 
+	xhci->usb2_ports = NULL;
+	xhci->usb3_ports = NULL;
+	xhci->port_array = NULL;
+	xhci->rh_bw = NULL;
+	xhci->ext_caps = NULL;
+
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
 	xhci->bus_state[0].bus_suspended = 0;
-- 
1.9.1

[PATCH v2 6/6] xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers

[Mathias Nyman]

PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.

Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.

For now the flag is only set for PCI connected host controllers.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-pci.c  | 1 +
 drivers/usb/host/xhci-ring.c | 3 ++-
 drivers/usb/host/xhci.c      | 8 +++++---
 drivers/usb/host/xhci.h      | 1 +
 4 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 071b34a..48672fa 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -304,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
 	struct xhci_hcd *xhci;
 
 	xhci = hcd_to_xhci(pci_get_drvdata(dev));
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
 	if (xhci->shared_hcd) {
 		usb_remove_hcd(xhci->shared_hcd);
 		usb_put_hcd(xhci->shared_hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7cf6621..99b4ff4 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
 	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
 	int ret;
 
-	if (xhci->xhc_state) {
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_HALTED)) {
 		xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
 		return -ESHUTDOWN;
 	}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 9283d333..9e71c96 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci)
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
 	if (!ret)
-		xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+		/* clear state flags. Including dying, halted or removing */
+		xhci->xhc_state = 0;
 
 	return ret;
 }
@@ -2773,7 +2774,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	if (ret <= 0)
 		return ret;
 	xhci = hcd_to_xhci(hcd);
-	if (xhci->xhc_state & XHCI_STATE_DYING)
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_REMOVING))
 		return -ENODEV;
 
 	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
@@ -3820,7 +3822,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 	mutex_lock(&xhci->mutex);
 
-	if (xhci->xhc_state)	/* dying or halted */
+	if (xhci->xhc_state)	/* dying, removing or halted */
 		goto out;
 
 	if (!udev->slot_id) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 70f215c..6c629c9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1605,6 +1605,7 @@ struct xhci_hcd {
  */
 #define XHCI_STATE_DYING	(1 << 0)
 #define XHCI_STATE_HALTED	(1 << 1)
+#define XHCI_STATE_REMOVING	(1 << 2)
 	/* Statistics */
 	int			error_bitmask;
 	unsigned int		quirks;
-- 
1.9.1