* [U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC
@ 2016-04-09 13:23 Hans de Goede
2016-04-10 8:18 ` Ian Campbell
0 siblings, 1 reply; 3+ messages in thread
From: Hans de Goede @ 2016-04-09 13:23 UTC (permalink / raw)
To: u-boot
The Orange Pi One SBC, is a stripped down version of the popular
Orange Pi PC. The one is a H3 based SBC, with 512M of RAM,
micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet.
The dts is identical to the dts submitted to the upstream kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun8i-h3-orangepi-one.dts | 145 +++++++++++++++++++++++++++++++++
board/sunxi/MAINTAINERS | 1 +
configs/orangepi_one_defconfig | 16 ++++
4 files changed, 163 insertions(+)
create mode 100644 arch/arm/dts/sun8i-h3-orangepi-one.dts
create mode 100644 configs/orangepi_one_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 01cf030..0915e05 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -207,6 +207,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sun8i-a83t-sinovoip-bpi-m3.dtb
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-orangepi-2.dtb \
+ sun8i-h3-orangepi-one.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-plus.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
diff --git a/arch/arm/dts/sun8i-h3-orangepi-one.dts b/arch/arm/dts/sun8i-h3-orangepi-one.dts
new file mode 100644
index 0000000..0adf932
--- /dev/null
+++ b/arch/arm/dts/sun8i-h3-orangepi-one.dts
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Xunlong Orange Pi One";
+ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+ pwr_led {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status_led {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r_gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sw_r_opc>;
+
+ sw4 {
+ label = "sw4";
+ linux,code = <BTN_0>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ leds_opc: led_pins at 0 {
+ allwinner,pins = "PA15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&r_pio {
+ leds_r_opc: led_pins at 0 {
+ allwinner,pins = "PL10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ sw_r_opc: key_pins at 0 {
+ allwinner,pins = "PL3";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ /* USB VBUS is always on */
+ status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 430d770..2cb8a75 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -55,6 +55,7 @@ F: include/configs/sun8i.h
F: configs/ga10h_v1_1_defconfig
F: configs/gt90h_v4_defconfig
F: configs/orangepi_2_defconfig
+F: configs/orangepi_one_defconfig
F: configs/orangepi_pc_defconfig
F: configs/orangepi_plus_defconfig
F: configs/polaroid_mid2809pxe04_defconfig
diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig
new file mode 100644
index 0000000..207189a
--- /dev/null
+++ b/configs/orangepi_one_defconfig
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC0_CD_PIN="PF6"
+# CONFIG_VIDEO is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-one"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB1_VBUS_PIN=""
--
2.7.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC
2016-04-09 13:23 [U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC Hans de Goede
@ 2016-04-10 8:18 ` Ian Campbell
0 siblings, 0 replies; 3+ messages in thread
From: Ian Campbell @ 2016-04-10 8:18 UTC (permalink / raw)
To: u-boot
On Sat, 2016-04-09 at 15:23 +0200, Hans de Goede wrote:
> The Orange Pi One SBC, is a stripped down version of the popular
> Orange Pi PC. The one is a H3 based SBC, with 512M of RAM,
> micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet.
>
> The dts is identical to the dts submitted to the upstream kernel.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC
@ 2016-10-14 9:25 Jp Theroux
0 siblings, 0 replies; 3+ messages in thread
From: Jp Theroux @ 2016-10-14 9:25 UTC (permalink / raw)
To: u-boot
Hello hi, my name is jean-philippe theroux.
i'm rather new to linux and tonight i had the crazy idea to try to
recompile the kernel on a orange pi plus Soc.
i am using a somewhat recent distribution and i believe it's not even been
released with the actual config and all the fixes i made (to the img)
i am quite computer educated started in 1983...
just i never compiled a linux kernel being a microsoft idiot for nearly 25
years...
i am rather far in the process, i installed the compiler stuff already and
everything needed for the recompilation, downloaded kernel sources (loboris)
but i'm stuck at some point
im using this tutorial which i tried to follow
https://github.com/umiddelb/armhf/wiki/How-To-compile-a-custom-Linux-kernel-for-your-ARM-device
can i kindly ask for your help?
thanks your for your time
Jean-Philippe theroux
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-10-14 9:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-09 13:23 [U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC Hans de Goede
2016-04-10 8:18 ` Ian Campbell
2016-10-14 9:25 Jp Theroux
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.