From: Lyude <cpaul@redhat.com> To: dri-devel@lists.freedesktop.org Cc: Lyude <cpaul@redhat.com>, David Airlie <airlied@linux.ie>, linux-kernel@vger.kernel.org (open list) Subject: [PATCH] drm/dp/mst: Restore primary hub guid on resume Date: Wed, 13 Apr 2016 16:50:18 -0400 [thread overview] Message-ID: <1460580618-7421-1-git-send-email-cpaul@redhat.com> (raw) Some hubs are forgetful, and end up forgetting whatever GUID we set previously after we do a suspend/resume cycle. This can lead to hotplugging breaking (along with probably other things) since the hub will start sending connection notifications with the wrong GUID. As such, we need to check on resume whether or not the GUID the hub is giving us is valid. Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> --- drivers/gpu/drm/drm_dp_mst_topology.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 27fbd79..d2efd78 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -2121,6 +2121,8 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr) if (mgr->mst_primary) { int sret; + u8 guid[16]; + sret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd, DP_RECEIVER_CAP_SIZE); if (sret != DP_RECEIVER_CAP_SIZE) { DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n"); @@ -2135,6 +2137,16 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr) ret = -1; goto out_unlock; } + + /* Some hubs forget their guids after they resume */ + sret = drm_dp_dpcd_read(mgr->aux, DP_GUID, guid, 16); + if (sret != 16) { + DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n"); + ret = -1; + goto out_unlock; + } + drm_dp_check_mstb_guid(mgr->mst_primary, guid); + ret = 0; } else ret = -1; -- 2.5.5
WARNING: multiple messages have this Message-ID (diff)
From: Lyude <cpaul@redhat.com> To: dri-devel@lists.freedesktop.org Cc: Lyude <cpaul@redhat.com>, open list <linux-kernel@vger.kernel.org> Subject: [PATCH] drm/dp/mst: Restore primary hub guid on resume Date: Wed, 13 Apr 2016 16:50:18 -0400 [thread overview] Message-ID: <1460580618-7421-1-git-send-email-cpaul@redhat.com> (raw) Some hubs are forgetful, and end up forgetting whatever GUID we set previously after we do a suspend/resume cycle. This can lead to hotplugging breaking (along with probably other things) since the hub will start sending connection notifications with the wrong GUID. As such, we need to check on resume whether or not the GUID the hub is giving us is valid. Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> --- drivers/gpu/drm/drm_dp_mst_topology.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 27fbd79..d2efd78 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -2121,6 +2121,8 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr) if (mgr->mst_primary) { int sret; + u8 guid[16]; + sret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd, DP_RECEIVER_CAP_SIZE); if (sret != DP_RECEIVER_CAP_SIZE) { DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n"); @@ -2135,6 +2137,16 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr) ret = -1; goto out_unlock; } + + /* Some hubs forget their guids after they resume */ + sret = drm_dp_dpcd_read(mgr->aux, DP_GUID, guid, 16); + if (sret != 16) { + DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n"); + ret = -1; + goto out_unlock; + } + drm_dp_check_mstb_guid(mgr->mst_primary, guid); + ret = 0; } else ret = -1; -- 2.5.5 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2016-04-13 20:50 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-04-13 20:50 Lyude [this message] 2016-04-13 20:50 ` [PATCH] drm/dp/mst: Restore primary hub guid on resume Lyude 2016-04-15 12:41 ` Harry Wentland 2016-04-15 13:01 ` Daniel Vetter
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1460580618-7421-1-git-send-email-cpaul@redhat.com \ --to=cpaul@redhat.com \ --cc=airlied@linux.ie \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.