* [PATCH] ARM: davinci: da8xx-usb: remove deprecated properties from MUSB config
@ 2016-04-13 22:19 ` David Lechner
0 siblings, 0 replies; 4+ messages in thread
From: David Lechner @ 2016-04-13 22:19 UTC (permalink / raw)
To: Sekhar Nori
Cc: Petr Kulhavy, David Lechner, Kevin Hilman, Russell King,
linux-arm-kernel, linux-kernel
This is the same as commit c1b3b058469e ("ARM: DaVinci USB: removed
deprecated properties from MUSB config") applied to usb-da8xx.c.
The following properties of the musb_hdrc_config structure
are deprecated and no longer required/used by the MUSB driver:
.dyn_fifo
.soft_con
.dma
.dma_channels
.eps_bits
Signed-off-by: David Lechner <david@lechnology.com>
---
arch/arm/mach-davinci/usb-da8xx.c | 17 -----------------
1 file changed, 17 deletions(-)
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index 0cab01f..a786c7b 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -17,27 +17,10 @@
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct musb_hdrc_eps_bits musb_eps[] = {
- { "ep1_tx", 8, },
- { "ep1_rx", 8, },
- { "ep2_tx", 8, },
- { "ep2_rx", 8, },
- { "ep3_tx", 5, },
- { "ep3_rx", 5, },
- { "ep4_tx", 5, },
- { "ep4_rx", 5, },
-};
-
static struct musb_hdrc_config musb_config = {
.multipoint = true,
- .dyn_fifo = true,
- .soft_con = true,
- .dma = true,
-
.num_eps = 5,
- .dma_channels = 8,
.ram_bits = 10,
- .eps_bits = musb_eps,
};
static struct musb_hdrc_platform_data usb_data = {
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: davinci: da8xx-usb: remove deprecated properties from MUSB config
@ 2016-04-13 22:19 ` David Lechner
0 siblings, 0 replies; 4+ messages in thread
From: David Lechner @ 2016-04-13 22:19 UTC (permalink / raw)
To: linux-arm-kernel
This is the same as commit c1b3b058469e ("ARM: DaVinci USB: removed
deprecated properties from MUSB config") applied to usb-da8xx.c.
The following properties of the musb_hdrc_config structure
are deprecated and no longer required/used by the MUSB driver:
.dyn_fifo
.soft_con
.dma
.dma_channels
.eps_bits
Signed-off-by: David Lechner <david@lechnology.com>
---
arch/arm/mach-davinci/usb-da8xx.c | 17 -----------------
1 file changed, 17 deletions(-)
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index 0cab01f..a786c7b 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -17,27 +17,10 @@
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct musb_hdrc_eps_bits musb_eps[] = {
- { "ep1_tx", 8, },
- { "ep1_rx", 8, },
- { "ep2_tx", 8, },
- { "ep2_rx", 8, },
- { "ep3_tx", 5, },
- { "ep3_rx", 5, },
- { "ep4_tx", 5, },
- { "ep4_rx", 5, },
-};
-
static struct musb_hdrc_config musb_config = {
.multipoint = true,
- .dyn_fifo = true,
- .soft_con = true,
- .dma = true,
-
.num_eps = 5,
- .dma_channels = 8,
.ram_bits = 10,
- .eps_bits = musb_eps,
};
static struct musb_hdrc_platform_data usb_data = {
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: davinci: da8xx-usb: remove deprecated properties from MUSB config
2016-04-13 22:19 ` David Lechner
@ 2016-04-14 12:04 ` Sekhar Nori
-1 siblings, 0 replies; 4+ messages in thread
From: Sekhar Nori @ 2016-04-14 12:04 UTC (permalink / raw)
To: David Lechner
Cc: Petr Kulhavy, Kevin Hilman, Russell King, linux-arm-kernel, linux-kernel
On Thursday 14 April 2016 03:49 AM, David Lechner wrote:
> This is the same as commit c1b3b058469e ("ARM: DaVinci USB: removed
> deprecated properties from MUSB config") applied to usb-da8xx.c.
>
> The following properties of the musb_hdrc_config structure
> are deprecated and no longer required/used by the MUSB driver:
>
> .dyn_fifo
> .soft_con
> .dma
> .dma_channels
> .eps_bits
>
> Signed-off-by: David Lechner <david@lechnology.com>
Thanks for pointing this out. I folded this into your patch "ARM:
davinci: da8xx: move usb code to new file"[1] and in turn based it on
Petr's patch cleaning up the deprecated properties from the usb.c file.
I have pushed all my v4.7/* branches to my tree and the master branch
merges all of these in. I should be sending the first pull request to
ARM-SoC by tomorrow. Any testing feedback on master branch appreciated.
Regards,
Sekhar
[1]
From: David Lechner <david@lechnology.com>
Date: Thu, 24 Mar 2016 18:51:28 -0500
Subject: [PATCH] ARM: davinci: da8xx: move usb code to new file
We will be adding more da8xx-specific code for phy and clocks, so it will
be better to have this in a separate file. This way we don't have a bunch
of #ifdefs for all of the da8xx stuff.
While at it, fix some checkpatch warnings coming from existing code.
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: typo and checkpatch fixes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm/mach-davinci/Makefile | 4 +-
arch/arm/mach-davinci/usb-da8xx.c | 107 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-davinci/usb.c | 73 --------------------------
3 files changed, 109 insertions(+), 75 deletions(-)
create mode 100644 arch/arm/mach-davinci/usb-da8xx.c
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2e3464b8bab4..da4c336b4637 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -14,8 +14,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o usb-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o usb-da8xx.o
obj-$(CONFIG_AINTC) += irq.o
obj-$(CONFIG_CP_INTC) += cp_intc.o
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
new file mode 100644
index 000000000000..f141f5171906
--- /dev/null
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -0,0 +1,107 @@
+/*
+ * DA8xx USB
+ */
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
+
+#define DA8XX_USB0_BASE 0x01e00000
+#define DA8XX_USB1_BASE 0x01e25000
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = true,
+ .num_eps = 5,
+ .ram_bits = 10,
+};
+
+static struct musb_hdrc_platform_data usb_data = {
+ /* OTG requires a Mini-AB connector */
+ .mode = MUSB_OTG,
+ .clock = "usb20",
+ .config = &musb_config,
+};
+
+static struct resource da8xx_usb20_resources[] = {
+ {
+ .start = DA8XX_USB0_BASE,
+ .end = DA8XX_USB0_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DA8XX_USB_INT,
+ .flags = IORESOURCE_IRQ,
+ .name = "mc",
+ },
+};
+
+static u64 usb_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device usb_dev = {
+ .name = "musb-da8xx",
+ .id = -1,
+ .dev = {
+ .platform_data = &usb_data,
+ .dma_mask = &usb_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = da8xx_usb20_resources,
+ .num_resources = ARRAY_SIZE(da8xx_usb20_resources),
+};
+
+int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
+{
+ usb_data.power = mA > 510 ? 255 : mA / 2;
+ usb_data.potpgt = (potpgt + 1) / 2;
+
+ return platform_device_register(&usb_dev);
+}
+
+#else
+
+int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
+{
+ return 0;
+}
+
+#endif /* CONFIG_USB_MUSB_HDRC */
+
+static struct resource da8xx_usb11_resources[] = {
+ [0] = {
+ .start = DA8XX_USB1_BASE,
+ .end = DA8XX_USB1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DA8XX_IRQN,
+ .end = IRQ_DA8XX_IRQN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device da8xx_usb11_device = {
+ .name = "ohci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &da8xx_usb11_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(da8xx_usb11_resources),
+ .resource = da8xx_usb11_resources,
+};
+
+int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+{
+ da8xx_usb11_device.dev.platform_data = pdata;
+ return platform_device_register(&da8xx_usb11_device);
+}
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 6ed5a54ae74d..0e7e89c1f331 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -10,14 +10,10 @@
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
-#include <mach/da8xx.h>
#include <linux/platform_data/usb-davinci.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000
-#define DA8XX_USB0_BASE 0x01e00000
-#define DA8XX_USB1_BASE 0x01e25000
-
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct musb_hdrc_config musb_config = {
.multipoint = true,
@@ -81,79 +77,10 @@ void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
platform_device_register(&usb_dev);
}
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb20_resources[] = {
- {
- .start = DA8XX_USB0_BASE,
- .end = DA8XX_USB0_BASE + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_DA8XX_USB_INT,
- .flags = IORESOURCE_IRQ,
- .name = "mc",
- },
-};
-
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
- usb_data.clock = "usb20";
- usb_data.power = mA > 510 ? 255 : mA / 2;
- usb_data.potpgt = (potpgt + 1) / 2;
-
- usb_dev.resource = da8xx_usb20_resources;
- usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
- usb_dev.name = "musb-da8xx";
-
- return platform_device_register(&usb_dev);
-}
-#endif /* CONFIG_DAVINCI_DA8XX */
-
#else
void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
{
}
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
- return 0;
-}
-#endif
-
#endif /* CONFIG_USB_MUSB_HDRC */
-
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb11_resources[] = {
- [0] = {
- .start = DA8XX_USB1_BASE,
- .end = DA8XX_USB1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DA8XX_IRQN,
- .end = IRQ_DA8XX_IRQN,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb11_device = {
- .name = "ohci",
- .id = 0,
- .dev = {
- .dma_mask = &da8xx_usb11_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(da8xx_usb11_resources),
- .resource = da8xx_usb11_resources,
-};
-
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
-{
- da8xx_usb11_device.dev.platform_data = pdata;
- return platform_device_register(&da8xx_usb11_device);
-}
-#endif /* CONFIG_DAVINCI_DA8XX */
--
2.6.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: davinci: da8xx-usb: remove deprecated properties from MUSB config
@ 2016-04-14 12:04 ` Sekhar Nori
0 siblings, 0 replies; 4+ messages in thread
From: Sekhar Nori @ 2016-04-14 12:04 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 14 April 2016 03:49 AM, David Lechner wrote:
> This is the same as commit c1b3b058469e ("ARM: DaVinci USB: removed
> deprecated properties from MUSB config") applied to usb-da8xx.c.
>
> The following properties of the musb_hdrc_config structure
> are deprecated and no longer required/used by the MUSB driver:
>
> .dyn_fifo
> .soft_con
> .dma
> .dma_channels
> .eps_bits
>
> Signed-off-by: David Lechner <david@lechnology.com>
Thanks for pointing this out. I folded this into your patch "ARM:
davinci: da8xx: move usb code to new file"[1] and in turn based it on
Petr's patch cleaning up the deprecated properties from the usb.c file.
I have pushed all my v4.7/* branches to my tree and the master branch
merges all of these in. I should be sending the first pull request to
ARM-SoC by tomorrow. Any testing feedback on master branch appreciated.
Regards,
Sekhar
[1]
From: David Lechner <david@lechnology.com>
Date: Thu, 24 Mar 2016 18:51:28 -0500
Subject: [PATCH] ARM: davinci: da8xx: move usb code to new file
We will be adding more da8xx-specific code for phy and clocks, so it will
be better to have this in a separate file. This way we don't have a bunch
of #ifdefs for all of the da8xx stuff.
While at it, fix some checkpatch warnings coming from existing code.
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar at ti.com: typo and checkpatch fixes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm/mach-davinci/Makefile | 4 +-
arch/arm/mach-davinci/usb-da8xx.c | 107 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-davinci/usb.c | 73 --------------------------
3 files changed, 109 insertions(+), 75 deletions(-)
create mode 100644 arch/arm/mach-davinci/usb-da8xx.c
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2e3464b8bab4..da4c336b4637 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -14,8 +14,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o usb-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o usb-da8xx.o
obj-$(CONFIG_AINTC) += irq.o
obj-$(CONFIG_CP_INTC) += cp_intc.o
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
new file mode 100644
index 000000000000..f141f5171906
--- /dev/null
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -0,0 +1,107 @@
+/*
+ * DA8xx USB
+ */
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
+
+#define DA8XX_USB0_BASE 0x01e00000
+#define DA8XX_USB1_BASE 0x01e25000
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = true,
+ .num_eps = 5,
+ .ram_bits = 10,
+};
+
+static struct musb_hdrc_platform_data usb_data = {
+ /* OTG requires a Mini-AB connector */
+ .mode = MUSB_OTG,
+ .clock = "usb20",
+ .config = &musb_config,
+};
+
+static struct resource da8xx_usb20_resources[] = {
+ {
+ .start = DA8XX_USB0_BASE,
+ .end = DA8XX_USB0_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DA8XX_USB_INT,
+ .flags = IORESOURCE_IRQ,
+ .name = "mc",
+ },
+};
+
+static u64 usb_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device usb_dev = {
+ .name = "musb-da8xx",
+ .id = -1,
+ .dev = {
+ .platform_data = &usb_data,
+ .dma_mask = &usb_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = da8xx_usb20_resources,
+ .num_resources = ARRAY_SIZE(da8xx_usb20_resources),
+};
+
+int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
+{
+ usb_data.power = mA > 510 ? 255 : mA / 2;
+ usb_data.potpgt = (potpgt + 1) / 2;
+
+ return platform_device_register(&usb_dev);
+}
+
+#else
+
+int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
+{
+ return 0;
+}
+
+#endif /* CONFIG_USB_MUSB_HDRC */
+
+static struct resource da8xx_usb11_resources[] = {
+ [0] = {
+ .start = DA8XX_USB1_BASE,
+ .end = DA8XX_USB1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DA8XX_IRQN,
+ .end = IRQ_DA8XX_IRQN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device da8xx_usb11_device = {
+ .name = "ohci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &da8xx_usb11_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(da8xx_usb11_resources),
+ .resource = da8xx_usb11_resources,
+};
+
+int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+{
+ da8xx_usb11_device.dev.platform_data = pdata;
+ return platform_device_register(&da8xx_usb11_device);
+}
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 6ed5a54ae74d..0e7e89c1f331 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -10,14 +10,10 @@
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
-#include <mach/da8xx.h>
#include <linux/platform_data/usb-davinci.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000
-#define DA8XX_USB0_BASE 0x01e00000
-#define DA8XX_USB1_BASE 0x01e25000
-
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct musb_hdrc_config musb_config = {
.multipoint = true,
@@ -81,79 +77,10 @@ void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
platform_device_register(&usb_dev);
}
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb20_resources[] = {
- {
- .start = DA8XX_USB0_BASE,
- .end = DA8XX_USB0_BASE + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_DA8XX_USB_INT,
- .flags = IORESOURCE_IRQ,
- .name = "mc",
- },
-};
-
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
- usb_data.clock = "usb20";
- usb_data.power = mA > 510 ? 255 : mA / 2;
- usb_data.potpgt = (potpgt + 1) / 2;
-
- usb_dev.resource = da8xx_usb20_resources;
- usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
- usb_dev.name = "musb-da8xx";
-
- return platform_device_register(&usb_dev);
-}
-#endif /* CONFIG_DAVINCI_DA8XX */
-
#else
void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
{
}
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
- return 0;
-}
-#endif
-
#endif /* CONFIG_USB_MUSB_HDRC */
-
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb11_resources[] = {
- [0] = {
- .start = DA8XX_USB1_BASE,
- .end = DA8XX_USB1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DA8XX_IRQN,
- .end = IRQ_DA8XX_IRQN,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb11_device = {
- .name = "ohci",
- .id = 0,
- .dev = {
- .dma_mask = &da8xx_usb11_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(da8xx_usb11_resources),
- .resource = da8xx_usb11_resources,
-};
-
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
-{
- da8xx_usb11_device.dev.platform_data = pdata;
- return platform_device_register(&da8xx_usb11_device);
-}
-#endif /* CONFIG_DAVINCI_DA8XX */
--
2.6.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-04-14 12:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-13 22:19 [PATCH] ARM: davinci: da8xx-usb: remove deprecated properties from MUSB config David Lechner
2016-04-13 22:19 ` David Lechner
2016-04-14 12:04 ` Sekhar Nori
2016-04-14 12:04 ` Sekhar Nori
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.