[PATCH v4 0/3] mmc: pwrseq: convert to proper driver

[PATCH v4 0/3] mmc: pwrseq: convert to proper driver

[Srinivas Kandagatla]

Thanks for reviewing v3.

This patchset aims at converting the pwrseq devices to proper in drivers,
The issue is that on Qualcomm based platforms, most of the gpios require
a pinctrl setup. Existing pwrseq code does not do any kind of pinctrl setup.
So this makes the pwrseq unusable on those platfroms.

Convert the pwrseq to proper drivers so that they can reuse
common driver setup like pinctrl from drivers/base/pinctrl.c and clocks.
This solution works much better and would make pwrseq to reuse 
all the driver setup done in the common code.

Changes since v3:
	- Add error handling for try_module_get failures, suggested by Ulf.

Changes since v2: All changes suggested by Ulf
	- Moved all the allocations/gpio_get/clk_get to probe
	- Removed alloc and free callbacks
	- try_get_module inside a mutex
	- Fixed Kconfigs
	- renamed list to pwrseq_node
	- add mssing pdev_set_drvdata()

Changes since v1:
	- Fixed issue while building as module.

Changes since RFC:
	- Fixed issues reported by kbuild test robot.
	- return EPROBE_DEFER from *_alloc() suggested by Ulf.

Thanks,
srini

Srinivas Kandagatla (3):
  mmc: pwrseq_simple: add to_pwrseq_simple() macro
  mmc: pwrseq_emmc: add to_pwrseq_emmc() macro
  mmc: pwrseq: convert to proper platform device

 drivers/mmc/core/Kconfig         |  21 ++++++++
 drivers/mmc/core/Makefile        |   4 +-
 drivers/mmc/core/pwrseq.c        | 108 ++++++++++++++++++---------------------
 drivers/mmc/core/pwrseq.h        |  19 ++++---
 drivers/mmc/core/pwrseq_emmc.c   |  81 ++++++++++++++++++-----------
 drivers/mmc/core/pwrseq_simple.c |  91 ++++++++++++++++++---------------
 6 files changed, 185 insertions(+), 139 deletions(-)

-- 
2.5.0

[PATCH v4 1/3] mmc: pwrseq_simple: add to_pwrseq_simple() macro

[Srinivas Kandagatla]

This patch adds to_pwrseq_simple() macro to make the code more readable.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/mmc/core/pwrseq_simple.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index bc173e1..f94271b 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -25,6 +25,8 @@ struct mmc_pwrseq_simple {
 	struct gpio_descs *reset_gpios;
 };
 
+#define to_pwrseq_simple(p) container_of(p, struct mmc_pwrseq_simple, pwrseq)
+
 static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
 					      int value)
 {
@@ -44,8 +46,7 @@ static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
 
 static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
 {
-	struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
-					struct mmc_pwrseq_simple, pwrseq);
+	struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
 
 	if (!IS_ERR(pwrseq->ext_clk) && !pwrseq->clk_enabled) {
 		clk_prepare_enable(pwrseq->ext_clk);
@@ -57,16 +58,14 @@ static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
 
 static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host)
 {
-	struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
-					struct mmc_pwrseq_simple, pwrseq);
+	struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
 
 	mmc_pwrseq_simple_set_gpios_value(pwrseq, 0);
 }
 
 static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
 {
-	struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
-					struct mmc_pwrseq_simple, pwrseq);
+	struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
 
 	mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
 
@@ -78,8 +77,7 @@ static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
 
 static void mmc_pwrseq_simple_free(struct mmc_host *host)
 {
-	struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
-					struct mmc_pwrseq_simple, pwrseq);
+	struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
 
 	if (!IS_ERR(pwrseq->reset_gpios))
 		gpiod_put_array(pwrseq->reset_gpios);
-- 
2.5.0

[PATCH v4 2/3] mmc: pwrseq_emmc: add to_pwrseq_emmc() macro

[Srinivas Kandagatla]

This patch adds to_pwrseq_emmc() macro to make the code more readable.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/mmc/core/pwrseq_emmc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c
index 4a82bc7..c2d732a 100644
--- a/drivers/mmc/core/pwrseq_emmc.c
+++ b/drivers/mmc/core/pwrseq_emmc.c
@@ -25,6 +25,8 @@ struct mmc_pwrseq_emmc {
 	struct gpio_desc *reset_gpio;
 };
 
+#define to_pwrseq_emmc(p) container_of(p, struct mmc_pwrseq_emmc, pwrseq)
+
 static void __mmc_pwrseq_emmc_reset(struct mmc_pwrseq_emmc *pwrseq)
 {
 	gpiod_set_value(pwrseq->reset_gpio, 1);
@@ -35,16 +37,14 @@ static void __mmc_pwrseq_emmc_reset(struct mmc_pwrseq_emmc *pwrseq)
 
 static void mmc_pwrseq_emmc_reset(struct mmc_host *host)
 {
-	struct mmc_pwrseq_emmc *pwrseq = container_of(host->pwrseq,
-					struct mmc_pwrseq_emmc, pwrseq);
+	struct mmc_pwrseq_emmc *pwrseq =  to_pwrseq_emmc(host->pwrseq);
 
 	__mmc_pwrseq_emmc_reset(pwrseq);
 }
 
 static void mmc_pwrseq_emmc_free(struct mmc_host *host)
 {
-	struct mmc_pwrseq_emmc *pwrseq = container_of(host->pwrseq,
-					struct mmc_pwrseq_emmc, pwrseq);
+	struct mmc_pwrseq_emmc *pwrseq =  to_pwrseq_emmc(host->pwrseq);
 
 	unregister_restart_handler(&pwrseq->reset_nb);
 	gpiod_put(pwrseq->reset_gpio);
-- 
2.5.0

[PATCH v4 3/3] mmc: pwrseq: convert to proper platform device

[Srinivas Kandagatla]

simple-pwrseq and emmc-pwrseq drivers rely on platform_device
structure from of_find_device_by_node(), this works mostly. But, as there
is no driver associated with this devices, cases like default/init pinctrl
setup would never be performed by pwrseq. This becomes problem when the
gpios used in pwrseq require pinctrl setup.

Currently most of the common pinctrl setup is done in
drivers/base/pinctrl.c by pinctrl_bind_pins().

There are two ways to solve this issue on either convert pwrseq drivers
to a proper platform drivers or copy the exact code from
pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that
other cases like setting up clks/parents from dt would also be possible.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/mmc/core/Kconfig         |  21 ++++++++
 drivers/mmc/core/Makefile        |   4 +-
 drivers/mmc/core/pwrseq.c        | 108 ++++++++++++++++++---------------------
 drivers/mmc/core/pwrseq.h        |  19 ++++---
 drivers/mmc/core/pwrseq_emmc.c   |  75 +++++++++++++++++----------
 drivers/mmc/core/pwrseq_simple.c |  79 +++++++++++++++-------------
 6 files changed, 177 insertions(+), 129 deletions(-)

diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index 4c33d76..250f223 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -1,3 +1,24 @@
 #
 # MMC core configuration
 #
+config PWRSEQ_EMMC
+	tristate "HW reset support for eMMC"
+	default y
+	depends on OF
+	help
+	  This selects Hardware reset support aka pwrseq-emmc for eMMC
+	  devices. By default this option is set to y.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pwrseq_emmc.
+
+config PWRSEQ_SIMPLE
+	tristate "Simple HW reset support for MMC"
+	default y
+	depends on OF
+	help
+	  This selects simple hardware reset support aka pwrseq-simple for MMC
+	  devices. By default this option is set to y.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pwrseq_simple.
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index 2c25138..f007151 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -8,5 +8,7 @@ mmc_core-y			:= core.o bus.o host.o \
 				   sdio.o sdio_ops.o sdio_bus.o \
 				   sdio_cis.o sdio_io.o sdio_irq.o \
 				   quirks.o slot-gpio.o
-mmc_core-$(CONFIG_OF)		+= pwrseq.o pwrseq_simple.o pwrseq_emmc.o
+mmc_core-$(CONFIG_OF)		+= pwrseq.o
+obj-$(CONFIG_PWRSEQ_SIMPLE)	+= pwrseq_simple.o
+obj-$(CONFIG_PWRSEQ_EMMC)	+= pwrseq_emmc.o
 mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o
diff --git a/drivers/mmc/core/pwrseq.c b/drivers/mmc/core/pwrseq.c
index 4c1d175..9386c47 100644
--- a/drivers/mmc/core/pwrseq.c
+++ b/drivers/mmc/core/pwrseq.c
@@ -8,88 +8,55 @@
  *  MMC power sequence management
  */
 #include <linux/kernel.h>
-#include <linux/platform_device.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_platform.h>
 
 #include <linux/mmc/host.h>
 
 #include "pwrseq.h"
 
-struct mmc_pwrseq_match {
-	const char *compatible;
-	struct mmc_pwrseq *(*alloc)(struct mmc_host *host, struct device *dev);
-};
-
-static struct mmc_pwrseq_match pwrseq_match[] = {
-	{
-		.compatible = "mmc-pwrseq-simple",
-		.alloc = mmc_pwrseq_simple_alloc,
-	}, {
-		.compatible = "mmc-pwrseq-emmc",
-		.alloc = mmc_pwrseq_emmc_alloc,
-	},
-};
-
-static struct mmc_pwrseq_match *mmc_pwrseq_find(struct device_node *np)
-{
-	struct mmc_pwrseq_match *match = ERR_PTR(-ENODEV);
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pwrseq_match); i++) {
-		if (of_device_is_compatible(np,	pwrseq_match[i].compatible)) {
-			match = &pwrseq_match[i];
-			break;
-		}
-	}
-
-	return match;
-}
+static DEFINE_MUTEX(pwrseq_list_mutex);
+static LIST_HEAD(pwrseq_list);
 
 int mmc_pwrseq_alloc(struct mmc_host *host)
 {
-	struct platform_device *pdev;
 	struct device_node *np;
-	struct mmc_pwrseq_match *match;
-	struct mmc_pwrseq *pwrseq;
-	int ret = 0;
+	struct mmc_pwrseq *p;
 
 	np = of_parse_phandle(host->parent->of_node, "mmc-pwrseq", 0);
 	if (!np)
 		return 0;
 
-	pdev = of_find_device_by_node(np);
-	if (!pdev) {
-		ret = -ENODEV;
-		goto err;
-	}
+	mutex_lock(&pwrseq_list_mutex);
+	list_for_each_entry(p, &pwrseq_list, pwrseq_node) {
+		if (p->dev->of_node == np) {
+			if (!try_module_get(p->owner))
+				dev_err(host->parent,
+					"increasing module refcount failed\n");
+			else
+				host->pwrseq = p;
 
-	match = mmc_pwrseq_find(np);
-	if (IS_ERR(match)) {
-		ret = PTR_ERR(match);
-		goto err;
+			break;
+		}
 	}
 
-	pwrseq = match->alloc(host, &pdev->dev);
-	if (IS_ERR(pwrseq)) {
-		ret = PTR_ERR(pwrseq);
-		goto err;
-	}
+	of_node_put(np);
+	mutex_unlock(&pwrseq_list_mutex);
+
+	if (!host->pwrseq)
+		return -EPROBE_DEFER;
 
-	host->pwrseq = pwrseq;
 	dev_info(host->parent, "allocated mmc-pwrseq\n");
 
-err:
-	of_node_put(np);
-	return ret;
+	return 0;
 }
 
 void mmc_pwrseq_pre_power_on(struct mmc_host *host)
 {
 	struct mmc_pwrseq *pwrseq = host->pwrseq;
 
-	if (pwrseq && pwrseq->ops && pwrseq->ops->pre_power_on)
+	if (pwrseq && pwrseq->ops->pre_power_on)
 		pwrseq->ops->pre_power_on(host);
 }
 
@@ -97,7 +64,7 @@ void mmc_pwrseq_post_power_on(struct mmc_host *host)
 {
 	struct mmc_pwrseq *pwrseq = host->pwrseq;
 
-	if (pwrseq && pwrseq->ops && pwrseq->ops->post_power_on)
+	if (pwrseq && pwrseq->ops->post_power_on)
 		pwrseq->ops->post_power_on(host);
 }
 
@@ -105,7 +72,7 @@ void mmc_pwrseq_power_off(struct mmc_host *host)
 {
 	struct mmc_pwrseq *pwrseq = host->pwrseq;
 
-	if (pwrseq && pwrseq->ops && pwrseq->ops->power_off)
+	if (pwrseq && pwrseq->ops->power_off)
 		pwrseq->ops->power_off(host);
 }
 
@@ -113,8 +80,31 @@ void mmc_pwrseq_free(struct mmc_host *host)
 {
 	struct mmc_pwrseq *pwrseq = host->pwrseq;
 
-	if (pwrseq && pwrseq->ops && pwrseq->ops->free)
-		pwrseq->ops->free(host);
+	if (pwrseq) {
+		module_put(pwrseq->owner);
+		host->pwrseq = NULL;
+	}
+}
+
+int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq)
+{
+	if (!pwrseq || !pwrseq->ops || !pwrseq->dev)
+		return -EINVAL;
 
-	host->pwrseq = NULL;
+	mutex_lock(&pwrseq_list_mutex);
+	list_add(&pwrseq->pwrseq_node, &pwrseq_list);
+	mutex_unlock(&pwrseq_list_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mmc_pwrseq_register);
+
+void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq)
+{
+	if (pwrseq) {
+		mutex_lock(&pwrseq_list_mutex);
+		list_del(&pwrseq->pwrseq_node);
+		mutex_unlock(&pwrseq_list_mutex);
+	}
 }
+EXPORT_SYMBOL_GPL(mmc_pwrseq_unregister);
diff --git a/drivers/mmc/core/pwrseq.h b/drivers/mmc/core/pwrseq.h
index 133de04..d69e751 100644
--- a/drivers/mmc/core/pwrseq.h
+++ b/drivers/mmc/core/pwrseq.h
@@ -8,32 +8,39 @@
 #ifndef _MMC_CORE_PWRSEQ_H
 #define _MMC_CORE_PWRSEQ_H
 
+#include <linux/mmc/host.h>
+
 struct mmc_pwrseq_ops {
 	void (*pre_power_on)(struct mmc_host *host);
 	void (*post_power_on)(struct mmc_host *host);
 	void (*power_off)(struct mmc_host *host);
-	void (*free)(struct mmc_host *host);
 };
 
 struct mmc_pwrseq {
 	const struct mmc_pwrseq_ops *ops;
+	struct device *dev;
+	struct list_head pwrseq_node;
+	struct module *owner;
 };
 
 #ifdef CONFIG_OF
 
+int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq);
+void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq);
+
 int mmc_pwrseq_alloc(struct mmc_host *host);
 void mmc_pwrseq_pre_power_on(struct mmc_host *host);
 void mmc_pwrseq_post_power_on(struct mmc_host *host);
 void mmc_pwrseq_power_off(struct mmc_host *host);
 void mmc_pwrseq_free(struct mmc_host *host);
 
-struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host,
-					   struct device *dev);
-struct mmc_pwrseq *mmc_pwrseq_emmc_alloc(struct mmc_host *host,
-					 struct device *dev);
-
 #else
 
+static inline int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq)
+{
+	return -ENOSYS;
+}
+static inline void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq) {}
 static inline int mmc_pwrseq_alloc(struct mmc_host *host) { return 0; }
 static inline void mmc_pwrseq_pre_power_on(struct mmc_host *host) {}
 static inline void mmc_pwrseq_post_power_on(struct mmc_host *host) {}
diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c
index c2d732a..adc9c0c 100644
--- a/drivers/mmc/core/pwrseq_emmc.c
+++ b/drivers/mmc/core/pwrseq_emmc.c
@@ -9,6 +9,9 @@
  */
 #include <linux/delay.h>
 #include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -42,20 +45,6 @@ static void mmc_pwrseq_emmc_reset(struct mmc_host *host)
 	__mmc_pwrseq_emmc_reset(pwrseq);
 }
 
-static void mmc_pwrseq_emmc_free(struct mmc_host *host)
-{
-	struct mmc_pwrseq_emmc *pwrseq =  to_pwrseq_emmc(host->pwrseq);
-
-	unregister_restart_handler(&pwrseq->reset_nb);
-	gpiod_put(pwrseq->reset_gpio);
-	kfree(pwrseq);
-}
-
-static const struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = {
-	.post_power_on = mmc_pwrseq_emmc_reset,
-	.free = mmc_pwrseq_emmc_free,
-};
-
 static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this,
 				    unsigned long mode, void *cmd)
 {
@@ -66,21 +55,22 @@ static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this,
 	return NOTIFY_DONE;
 }
 
-struct mmc_pwrseq *mmc_pwrseq_emmc_alloc(struct mmc_host *host,
-					 struct device *dev)
+static const struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = {
+	.post_power_on = mmc_pwrseq_emmc_reset,
+};
+
+static int mmc_pwrseq_emmc_probe(struct platform_device *pdev)
 {
 	struct mmc_pwrseq_emmc *pwrseq;
-	int ret = 0;
+	struct device *dev = &pdev->dev;
 
-	pwrseq = kzalloc(sizeof(struct mmc_pwrseq_emmc), GFP_KERNEL);
+	pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL);
 	if (!pwrseq)
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 
-	pwrseq->reset_gpio = gpiod_get(dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(pwrseq->reset_gpio)) {
-		ret = PTR_ERR(pwrseq->reset_gpio);
-		goto free;
-	}
+	pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(pwrseq->reset_gpio))
+		return PTR_ERR(pwrseq->reset_gpio);
 
 	/*
 	 * register reset handler to ensure emmc reset also from
@@ -92,9 +82,38 @@ struct mmc_pwrseq *mmc_pwrseq_emmc_alloc(struct mmc_host *host,
 	register_restart_handler(&pwrseq->reset_nb);
 
 	pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops;
+	pwrseq->pwrseq.dev = dev;
+	pwrseq->pwrseq.owner = THIS_MODULE;
+	platform_set_drvdata(pdev, pwrseq);
+
+	return mmc_pwrseq_register(&pwrseq->pwrseq);
+}
+
+static int mmc_pwrseq_emmc_remove(struct platform_device *pdev)
+{
+	struct mmc_pwrseq_emmc *pwrseq = platform_get_drvdata(pdev);
+
+	unregister_restart_handler(&pwrseq->reset_nb);
+	mmc_pwrseq_unregister(&pwrseq->pwrseq);
 
-	return &pwrseq->pwrseq;
-free:
-	kfree(pwrseq);
-	return ERR_PTR(ret);
+	return 0;
 }
+
+static const struct of_device_id mmc_pwrseq_emmc_of_match[] = {
+	{ .compatible = "mmc-pwrseq-emmc",},
+	{/* sentinel */},
+};
+
+MODULE_DEVICE_TABLE(of, mmc_pwrseq_emmc_of_match);
+
+static struct platform_driver mmc_pwrseq_emmc_driver = {
+	.probe = mmc_pwrseq_emmc_probe,
+	.remove = mmc_pwrseq_emmc_remove,
+	.driver = {
+		.name = "pwrseq_emmc",
+		.of_match_table = mmc_pwrseq_emmc_of_match,
+	},
+};
+
+module_platform_driver(mmc_pwrseq_emmc_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index f94271b..450d907 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -8,7 +8,10 @@
  *  Simple MMC power sequence management
  */
 #include <linux/clk.h>
+#include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -75,58 +78,64 @@ static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
 	}
 }
 
-static void mmc_pwrseq_simple_free(struct mmc_host *host)
-{
-	struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
-
-	if (!IS_ERR(pwrseq->reset_gpios))
-		gpiod_put_array(pwrseq->reset_gpios);
-
-	if (!IS_ERR(pwrseq->ext_clk))
-		clk_put(pwrseq->ext_clk);
-
-	kfree(pwrseq);
-}
-
 static const struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = {
 	.pre_power_on = mmc_pwrseq_simple_pre_power_on,
 	.post_power_on = mmc_pwrseq_simple_post_power_on,
 	.power_off = mmc_pwrseq_simple_power_off,
-	.free = mmc_pwrseq_simple_free,
 };
 
-struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host,
-					   struct device *dev)
+static const struct of_device_id mmc_pwrseq_simple_of_match[] = {
+	{ .compatible = "mmc-pwrseq-simple",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mmc_pwrseq_simple_of_match);
+
+static int mmc_pwrseq_simple_probe(struct platform_device *pdev)
 {
 	struct mmc_pwrseq_simple *pwrseq;
-	int ret = 0;
+	struct device *dev = &pdev->dev;
 
-	pwrseq = kzalloc(sizeof(*pwrseq), GFP_KERNEL);
+	pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL);
 	if (!pwrseq)
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 
-	pwrseq->ext_clk = clk_get(dev, "ext_clock");
-	if (IS_ERR(pwrseq->ext_clk) &&
-	    PTR_ERR(pwrseq->ext_clk) != -ENOENT) {
-		ret = PTR_ERR(pwrseq->ext_clk);
-		goto free;
-	}
+	pwrseq->ext_clk = devm_clk_get(dev, "ext_clock");
+	if (IS_ERR(pwrseq->ext_clk) && PTR_ERR(pwrseq->ext_clk) != -ENOENT)
+		return PTR_ERR(pwrseq->ext_clk);
 
-	pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH);
+	pwrseq->reset_gpios = devm_gpiod_get_array(dev, "reset",
+							GPIOD_OUT_HIGH);
 	if (IS_ERR(pwrseq->reset_gpios) &&
 	    PTR_ERR(pwrseq->reset_gpios) != -ENOENT &&
 	    PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) {
-		ret = PTR_ERR(pwrseq->reset_gpios);
-		goto clk_put;
+		return PTR_ERR(pwrseq->reset_gpios);
 	}
 
+	pwrseq->pwrseq.dev = dev;
 	pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;
+	pwrseq->pwrseq.owner = THIS_MODULE;
+	platform_set_drvdata(pdev, pwrseq);
 
-	return &pwrseq->pwrseq;
-clk_put:
-	if (!IS_ERR(pwrseq->ext_clk))
-		clk_put(pwrseq->ext_clk);
-free:
-	kfree(pwrseq);
-	return ERR_PTR(ret);
+	return mmc_pwrseq_register(&pwrseq->pwrseq);
 }
+
+static int mmc_pwrseq_simple_remove(struct platform_device *pdev)
+{
+	struct mmc_pwrseq_simple *pwrseq = platform_get_drvdata(pdev);
+
+	mmc_pwrseq_unregister(&pwrseq->pwrseq);
+
+	return 0;
+}
+
+static struct platform_driver mmc_pwrseq_simple_driver = {
+	.probe = mmc_pwrseq_simple_probe,
+	.remove = mmc_pwrseq_simple_remove,
+	.driver = {
+		.name = "pwrseq_simple",
+		.of_match_table = mmc_pwrseq_simple_of_match,
+	},
+};
+
+module_platform_driver(mmc_pwrseq_simple_driver);
+MODULE_LICENSE("GPL v2");
-- 
2.5.0

Re: [PATCH v4 0/3] mmc: pwrseq: convert to proper driver

[Ulf Hansson]

On 14 April 2016 at 15:02, Srinivas Kandagatla
<srinivas.kandagatla@linaro.org> wrote:
> Thanks for reviewing v3.
>
> This patchset aims at converting the pwrseq devices to proper in drivers,
> The issue is that on Qualcomm based platforms, most of the gpios require
> a pinctrl setup. Existing pwrseq code does not do any kind of pinctrl setup.
> So this makes the pwrseq unusable on those platfroms.
>
> Convert the pwrseq to proper drivers so that they can reuse
> common driver setup like pinctrl from drivers/base/pinctrl.c and clocks.
> This solution works much better and would make pwrseq to reuse
> all the driver setup done in the common code.
>
> Changes since v3:
>         - Add error handling for try_module_get failures, suggested by Ulf.
>
> Changes since v2: All changes suggested by Ulf
>         - Moved all the allocations/gpio_get/clk_get to probe
>         - Removed alloc and free callbacks
>         - try_get_module inside a mutex
>         - Fixed Kconfigs
>         - renamed list to pwrseq_node
>         - add mssing pdev_set_drvdata()
>
> Changes since v1:
>         - Fixed issue while building as module.
>
> Changes since RFC:
>         - Fixed issues reported by kbuild test robot.
>         - return EPROBE_DEFER from *_alloc() suggested by Ulf.
>
> Thanks,
> srini
>
> Srinivas Kandagatla (3):
>   mmc: pwrseq_simple: add to_pwrseq_simple() macro
>   mmc: pwrseq_emmc: add to_pwrseq_emmc() macro
>   mmc: pwrseq: convert to proper platform device
>
>  drivers/mmc/core/Kconfig         |  21 ++++++++
>  drivers/mmc/core/Makefile        |   4 +-
>  drivers/mmc/core/pwrseq.c        | 108 ++++++++++++++++++---------------------
>  drivers/mmc/core/pwrseq.h        |  19 ++++---
>  drivers/mmc/core/pwrseq_emmc.c   |  81 ++++++++++++++++++-----------
>  drivers/mmc/core/pwrseq_simple.c |  91 ++++++++++++++++++---------------
>  6 files changed, 185 insertions(+), 139 deletions(-)
>
> --
> 2.5.0
>

Thanks, applied for next!

Kind regards
Uffe