* [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: linux-arm-kernel
This patch series adds support for PWM for DRA7. The IP is the same as the
one present in AM33XX and AM437XX.
However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
and eQEP.
The following are the biggest changes from v5 to v6:
* Created two new bindings to allow ECAP and PWM to grab their functional
clock from DT rather than depending on PWMSS parent.
* Pull in a couple of patches from the "Correct PWM bindings" series. This
makes it a bit easier to understand.
>From the two patchsets a handful of patches have already been pulled in by
maintainers and have already made it to linux-next. Therefore, this
patch series is built ontop of the latest linux-next.
Tested on:
AM335x, AM437x and X15 + lcd w/backlight
This series has been verified to be backwards compatible with old dtbs.
Franklin S Cooper Jr (6):
clk: ti: am335x/am4372: Add tbclk to pwm node
pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
pwms: pwm-ti*: Get the clock from the PWMSS parent when using old
bindings
ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
Vignesh R (1):
ARM: dts: DRA7: Add dt nodes for PWMSS
.../devicetree/bindings/pwm/pwm-tiecap.txt | 24 ++++--
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 28 ++++---
.../devicetree/bindings/pwm/pwm-tipwmss.txt | 15 +++-
arch/arm/boot/dts/am33xx.dtsi | 36 ++++++---
arch/arm/boot/dts/am4372.dtsi | 61 +++++++++++----
arch/arm/boot/dts/da850.dtsi | 15 ++--
arch/arm/boot/dts/dra7.dtsi | 90 ++++++++++++++++++++++
.../mach-omap2/omap_hwmod_33xx_43xx_common_data.h | 18 -----
.../omap_hwmod_33xx_43xx_interconnect_data.c | 64 ---------------
.../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 84 --------------------
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 9 ---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 54 -------------
drivers/clk/ti/clk-33xx.c | 3 +
drivers/clk/ti/clk-43xx.c | 6 ++
drivers/pwm/pwm-tiecap.c | 7 ++
drivers/pwm/pwm-tiehrpwm.c | 7 ++
16 files changed, 242 insertions(+), 279 deletions(-)
--
2.7.0
^ permalink raw reply [flat|nested] 37+ messages in thread* [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
This patch series adds support for PWM for DRA7. The IP is the same as the
one present in AM33XX and AM437XX.
However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
and eQEP.
The following are the biggest changes from v5 to v6:
* Created two new bindings to allow ECAP and PWM to grab their functional
clock from DT rather than depending on PWMSS parent.
* Pull in a couple of patches from the "Correct PWM bindings" series. This
makes it a bit easier to understand.
From the two patchsets a handful of patches have already been pulled in by
maintainers and have already made it to linux-next. Therefore, this
patch series is built ontop of the latest linux-next.
Tested on:
AM335x, AM437x and X15 + lcd w/backlight
This series has been verified to be backwards compatible with old dtbs.
Franklin S Cooper Jr (6):
clk: ti: am335x/am4372: Add tbclk to pwm node
pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
pwms: pwm-ti*: Get the clock from the PWMSS parent when using old
bindings
ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
Vignesh R (1):
ARM: dts: DRA7: Add dt nodes for PWMSS
.../devicetree/bindings/pwm/pwm-tiecap.txt | 24 ++++--
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 28 ++++---
.../devicetree/bindings/pwm/pwm-tipwmss.txt | 15 +++-
arch/arm/boot/dts/am33xx.dtsi | 36 ++++++---
arch/arm/boot/dts/am4372.dtsi | 61 +++++++++++----
arch/arm/boot/dts/da850.dtsi | 15 ++--
arch/arm/boot/dts/dra7.dtsi | 90 ++++++++++++++++++++++
.../mach-omap2/omap_hwmod_33xx_43xx_common_data.h | 18 -----
.../omap_hwmod_33xx_43xx_interconnect_data.c | 64 ---------------
.../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 84 --------------------
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 9 ---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 54 -------------
drivers/clk/ti/clk-33xx.c | 3 +
drivers/clk/ti/clk-43xx.c | 6 ++
drivers/pwm/pwm-tiecap.c | 7 ++
drivers/pwm/pwm-tiehrpwm.c | 7 ++
16 files changed, 242 insertions(+), 279 deletions(-)
--
2.7.0
^ permalink raw reply [flat|nested] 37+ messages in thread* [PATCH v6 1/7] clk: ti: am335x/am4372: Add tbclk to pwm node
2016-04-22 16:40 ` Franklin S Cooper Jr
(?)
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
Add tblck to the pwm nodes. This insures that the ehrpwm driver has access
to the time-based clk.
Do not remove similar entries for ehrpwm node. Later patches will switch
from using ehrpwm node name to pwm. But to maintain ABI compatibility we
shouldn't remove the old entries.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/ti/clk-33xx.c | 3 +++
drivers/clk/ti/clk-43xx.c | 6 ++++++
2 files changed, 9 insertions(+)
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index ef2ec64..0e47d95 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -108,6 +108,9 @@ static struct ti_dt_clk am33xx_clks[] = {
DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
+ DT_CLK("48300200.pwm", "tbclk", "ehrpwm0_tbclk"),
+ DT_CLK("48302200.pwm", "tbclk", "ehrpwm1_tbclk"),
+ DT_CLK("48304200.pwm", "tbclk", "ehrpwm2_tbclk"),
{ .node_name = NULL },
};
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 097fc90..7255aa8 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -115,6 +115,12 @@ static struct ti_dt_clk am43xx_clks[] = {
DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm3_tbclk"),
DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm4_tbclk"),
DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm5_tbclk"),
+ DT_CLK("48300200.pwm", "tbclk", "ehrpwm0_tbclk"),
+ DT_CLK("48302200.pwm", "tbclk", "ehrpwm1_tbclk"),
+ DT_CLK("48304200.pwm", "tbclk", "ehrpwm2_tbclk"),
+ DT_CLK("48306200.pwm", "tbclk", "ehrpwm3_tbclk"),
+ DT_CLK("48308200.pwm", "tbclk", "ehrpwm4_tbclk"),
+ DT_CLK("4830a200.pwm", "tbclk", "ehrpwm5_tbclk"),
{ .node_name = NULL },
};
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 1/7] clk: ti: am335x/am4372: Add tbclk to pwm node
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: linux-arm-kernel
Add tblck to the pwm nodes. This insures that the ehrpwm driver has access
to the time-based clk.
Do not remove similar entries for ehrpwm node. Later patches will switch
from using ehrpwm node name to pwm. But to maintain ABI compatibility we
shouldn't remove the old entries.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/ti/clk-33xx.c | 3 +++
drivers/clk/ti/clk-43xx.c | 6 ++++++
2 files changed, 9 insertions(+)
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index ef2ec64..0e47d95 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -108,6 +108,9 @@ static struct ti_dt_clk am33xx_clks[] = {
DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
+ DT_CLK("48300200.pwm", "tbclk", "ehrpwm0_tbclk"),
+ DT_CLK("48302200.pwm", "tbclk", "ehrpwm1_tbclk"),
+ DT_CLK("48304200.pwm", "tbclk", "ehrpwm2_tbclk"),
{ .node_name = NULL },
};
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 097fc90..7255aa8 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -115,6 +115,12 @@ static struct ti_dt_clk am43xx_clks[] = {
DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm3_tbclk"),
DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm4_tbclk"),
DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm5_tbclk"),
+ DT_CLK("48300200.pwm", "tbclk", "ehrpwm0_tbclk"),
+ DT_CLK("48302200.pwm", "tbclk", "ehrpwm1_tbclk"),
+ DT_CLK("48304200.pwm", "tbclk", "ehrpwm2_tbclk"),
+ DT_CLK("48306200.pwm", "tbclk", "ehrpwm3_tbclk"),
+ DT_CLK("48308200.pwm", "tbclk", "ehrpwm4_tbclk"),
+ DT_CLK("4830a200.pwm", "tbclk", "ehrpwm5_tbclk"),
{ .node_name = NULL },
};
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 1/7] clk: ti: am335x/am4372: Add tbclk to pwm node
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
Add tblck to the pwm nodes. This insures that the ehrpwm driver has access
to the time-based clk.
Do not remove similar entries for ehrpwm node. Later patches will switch
from using ehrpwm node name to pwm. But to maintain ABI compatibility we
shouldn't remove the old entries.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/ti/clk-33xx.c | 3 +++
drivers/clk/ti/clk-43xx.c | 6 ++++++
2 files changed, 9 insertions(+)
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index ef2ec64..0e47d95 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -108,6 +108,9 @@ static struct ti_dt_clk am33xx_clks[] = {
DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
+ DT_CLK("48300200.pwm", "tbclk", "ehrpwm0_tbclk"),
+ DT_CLK("48302200.pwm", "tbclk", "ehrpwm1_tbclk"),
+ DT_CLK("48304200.pwm", "tbclk", "ehrpwm2_tbclk"),
{ .node_name = NULL },
};
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 097fc90..7255aa8 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -115,6 +115,12 @@ static struct ti_dt_clk am43xx_clks[] = {
DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm3_tbclk"),
DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm4_tbclk"),
DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm5_tbclk"),
+ DT_CLK("48300200.pwm", "tbclk", "ehrpwm0_tbclk"),
+ DT_CLK("48302200.pwm", "tbclk", "ehrpwm1_tbclk"),
+ DT_CLK("48304200.pwm", "tbclk", "ehrpwm2_tbclk"),
+ DT_CLK("48306200.pwm", "tbclk", "ehrpwm3_tbclk"),
+ DT_CLK("48308200.pwm", "tbclk", "ehrpwm4_tbclk"),
+ DT_CLK("4830a200.pwm", "tbclk", "ehrpwm5_tbclk"),
{ .node_name = NULL },
};
--
2.7.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [PATCH v6 2/7] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
2016-04-22 16:40 ` Franklin S Cooper Jr
(?)
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
Now that the node name has been changed from ehrpwm to pwm the document
should show this proper usage. Also change the unit address in the example
from 0 to the proper physical address value that should be used.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 9c100b2..0f9ba50 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -15,14 +15,14 @@ Optional properties:
Example:
-ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */
+ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x100>;
ti,hwmods = "ehrpwm0";
};
-ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
+ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 2/7] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: linux-arm-kernel
Now that the node name has been changed from ehrpwm to pwm the document
should show this proper usage. Also change the unit address in the example
from 0 to the proper physical address value that should be used.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 9c100b2..0f9ba50 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -15,14 +15,14 @@ Optional properties:
Example:
-ehrpwm0: ehrpwm at 0 { /* EHRPWM on am33xx */
+ehrpwm0: pwm at 48300200 { /* EHRPWM on am33xx */
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x100>;
ti,hwmods = "ehrpwm0";
};
-ehrpwm0: ehrpwm at 0 { /* EHRPWM on da850 */
+ehrpwm0: pwm at 300000 { /* EHRPWM on da850 */
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 2/7] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
Now that the node name has been changed from ehrpwm to pwm the document
should show this proper usage. Also change the unit address in the example
from 0 to the proper physical address value that should be used.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 9c100b2..0f9ba50 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -15,14 +15,14 @@ Optional properties:
Example:
-ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */
+ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x100>;
ti,hwmods = "ehrpwm0";
};
-ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
+ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
--
2.7.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
2016-04-22 16:40 ` Franklin S Cooper Jr
(?)
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
provide the various required clocks.
For AM437 and AM335x, add the required clocks explicitly to DT. The
hwmod entries for ECAP and EPWM will be removed and this will prevent
anything from breaking.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
.../devicetree/bindings/pwm/pwm-tiecap.txt | 12 +++--
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 12 +++--
arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
arch/arm/boot/dts/da850.dtsi | 15 ++++--
5 files changed, 95 insertions(+), 28 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index fb81179..5c7a116 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -2,8 +2,8 @@ TI SOC ECAP based APWM controller
Required properties:
- compatible: Must be "ti,<soc>-ecap".
- for am33xx - compatible = "ti,am33xx-ecap";
- for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+ for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The PWM channel index ranges from 0 to 4. The only third
cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -12,18 +12,22 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmod associated to the ECAP:
"ecap<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the ECAP's functional clock.
+- clock-names: Must be set to "fck".
Example:
ecap0: ecap@0 { /* ECAP on am33xx */
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
};
ecap0: ecap@0 { /* ECAP on da850 */
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 0f9ba50..a82e249 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -2,8 +2,8 @@ TI SOC EHRPWM based PWM controller
Required properties:
- compatible: Must be "ti,<soc>-ehrpwm".
- for am33xx - compatible = "ti,am33xx-ehrpwm";
- for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
@@ -12,18 +12,22 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmod associated to the EHRPWM:
"ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the PWM's time-base and functional clock.
+- clock-names: Must be set to "tbclk" and "fck".
Example:
ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x100>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm0";
};
ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 52be48b..999ba2f 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -679,9 +679,12 @@
0x48300200 0x48300200 0x80>; /* EHRPWM */
ecap0: ecap@48300100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
ti,hwmods = "ecap0";
@@ -689,10 +692,13 @@
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -709,9 +715,12 @@
0x48302200 0x48302200 0x80>; /* EHRPWM */
ecap1: ecap@48302100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
ti,hwmods = "ecap1";
@@ -719,10 +728,13 @@
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -739,9 +751,12 @@
0x48304200 0x48304200 0x80>; /* EHRPWM */
ecap2: ecap@48304100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
ti,hwmods = "ecap2";
@@ -749,10 +764,13 @@
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 12fcde4..e858460 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -672,18 +672,26 @@
status = "disabled";
ecap0: ecap@48300100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -698,18 +706,26 @@
status = "disabled";
ecap1: ecap@48302100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
ti,hwmods = "ecap1";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -724,18 +740,26 @@
status = "disabled";
ecap2: ecap@48304100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
ti,hwmods = "ecap2";
status = "disabled";
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -750,10 +774,14 @@
status = "disabled";
ehrpwm3: pwm@48306200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
ti,hwmods = "ehrpwm3";
+ clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -768,10 +796,14 @@
status = "disabled";
ehrpwm4: pwm@48308200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
ti,hwmods = "ehrpwm4";
+ clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -786,9 +818,13 @@
status = "disabled";
ehrpwm5: pwm@4830a200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4830a200 0x80>;
+ clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm5";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index c3910e2..28a1064 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -248,31 +248,36 @@
status = "disabled";
};
ehrpwm0: pwm@01f00000 {
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
ehrpwm1: pwm@01f02000 {
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
ecap0: ecap@01f06000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
ecap1: ecap@01f07000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
ecap2: ecap@01f08000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: linux-arm-kernel
Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
provide the various required clocks.
For AM437 and AM335x, add the required clocks explicitly to DT. The
hwmod entries for ECAP and EPWM will be removed and this will prevent
anything from breaking.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
.../devicetree/bindings/pwm/pwm-tiecap.txt | 12 +++--
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 12 +++--
arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
arch/arm/boot/dts/da850.dtsi | 15 ++++--
5 files changed, 95 insertions(+), 28 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index fb81179..5c7a116 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -2,8 +2,8 @@ TI SOC ECAP based APWM controller
Required properties:
- compatible: Must be "ti,<soc>-ecap".
- for am33xx - compatible = "ti,am33xx-ecap";
- for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+ for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The PWM channel index ranges from 0 to 4. The only third
cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -12,18 +12,22 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmod associated to the ECAP:
"ecap<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the ECAP's functional clock.
+- clock-names: Must be set to "fck".
Example:
ecap0: ecap at 0 { /* ECAP on am33xx */
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
};
ecap0: ecap at 0 { /* ECAP on da850 */
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 0f9ba50..a82e249 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -2,8 +2,8 @@ TI SOC EHRPWM based PWM controller
Required properties:
- compatible: Must be "ti,<soc>-ehrpwm".
- for am33xx - compatible = "ti,am33xx-ehrpwm";
- for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
@@ -12,18 +12,22 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmod associated to the EHRPWM:
"ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the PWM's time-base and functional clock.
+- clock-names: Must be set to "tbclk" and "fck".
Example:
ehrpwm0: pwm at 48300200 { /* EHRPWM on am33xx */
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x100>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm0";
};
ehrpwm0: pwm at 300000 { /* EHRPWM on da850 */
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 52be48b..999ba2f 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -679,9 +679,12 @@
0x48300200 0x48300200 0x80>; /* EHRPWM */
ecap0: ecap at 48300100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
ti,hwmods = "ecap0";
@@ -689,10 +692,13 @@
};
ehrpwm0: pwm at 48300200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -709,9 +715,12 @@
0x48302200 0x48302200 0x80>; /* EHRPWM */
ecap1: ecap at 48302100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
ti,hwmods = "ecap1";
@@ -719,10 +728,13 @@
};
ehrpwm1: pwm at 48302200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -739,9 +751,12 @@
0x48304200 0x48304200 0x80>; /* EHRPWM */
ecap2: ecap at 48304100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
ti,hwmods = "ecap2";
@@ -749,10 +764,13 @@
};
ehrpwm2: pwm at 48304200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 12fcde4..e858460 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -672,18 +672,26 @@
status = "disabled";
ecap0: ecap at 48300100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm0: pwm at 48300200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -698,18 +706,26 @@
status = "disabled";
ecap1: ecap at 48302100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
ti,hwmods = "ecap1";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm1: pwm at 48302200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -724,18 +740,26 @@
status = "disabled";
ecap2: ecap at 48304100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
ti,hwmods = "ecap2";
status = "disabled";
};
ehrpwm2: pwm at 48304200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -750,10 +774,14 @@
status = "disabled";
ehrpwm3: pwm at 48306200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
ti,hwmods = "ehrpwm3";
+ clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -768,10 +796,14 @@
status = "disabled";
ehrpwm4: pwm at 48308200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
ti,hwmods = "ehrpwm4";
+ clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -786,9 +818,13 @@
status = "disabled";
ehrpwm5: pwm at 4830a200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4830a200 0x80>;
+ clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm5";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index c3910e2..28a1064 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -248,31 +248,36 @@
status = "disabled";
};
ehrpwm0: pwm at 01f00000 {
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
ehrpwm1: pwm at 01f02000 {
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
ecap0: ecap at 01f06000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
ecap1: ecap at 01f07000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
ecap2: ecap at 01f08000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
provide the various required clocks.
For AM437 and AM335x, add the required clocks explicitly to DT. The
hwmod entries for ECAP and EPWM will be removed and this will prevent
anything from breaking.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
.../devicetree/bindings/pwm/pwm-tiecap.txt | 12 +++--
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 12 +++--
arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
arch/arm/boot/dts/da850.dtsi | 15 ++++--
5 files changed, 95 insertions(+), 28 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index fb81179..5c7a116 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -2,8 +2,8 @@ TI SOC ECAP based APWM controller
Required properties:
- compatible: Must be "ti,<soc>-ecap".
- for am33xx - compatible = "ti,am33xx-ecap";
- for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+ for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The PWM channel index ranges from 0 to 4. The only third
cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -12,18 +12,22 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmod associated to the ECAP:
"ecap<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the ECAP's functional clock.
+- clock-names: Must be set to "fck".
Example:
ecap0: ecap@0 { /* ECAP on am33xx */
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
};
ecap0: ecap@0 { /* ECAP on da850 */
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 0f9ba50..a82e249 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -2,8 +2,8 @@ TI SOC EHRPWM based PWM controller
Required properties:
- compatible: Must be "ti,<soc>-ehrpwm".
- for am33xx - compatible = "ti,am33xx-ehrpwm";
- for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
@@ -12,18 +12,22 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmod associated to the EHRPWM:
"ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the PWM's time-base and functional clock.
+- clock-names: Must be set to "tbclk" and "fck".
Example:
ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x100>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm0";
};
ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 52be48b..999ba2f 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -679,9 +679,12 @@
0x48300200 0x48300200 0x80>; /* EHRPWM */
ecap0: ecap@48300100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
ti,hwmods = "ecap0";
@@ -689,10 +692,13 @@
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -709,9 +715,12 @@
0x48302200 0x48302200 0x80>; /* EHRPWM */
ecap1: ecap@48302100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
ti,hwmods = "ecap1";
@@ -719,10 +728,13 @@
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -739,9 +751,12 @@
0x48304200 0x48304200 0x80>; /* EHRPWM */
ecap2: ecap@48304100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
ti,hwmods = "ecap2";
@@ -749,10 +764,13 @@
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 12fcde4..e858460 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -672,18 +672,26 @@
status = "disabled";
ecap0: ecap@48300100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -698,18 +706,26 @@
status = "disabled";
ecap1: ecap@48302100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
ti,hwmods = "ecap1";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -724,18 +740,26 @@
status = "disabled";
ecap2: ecap@48304100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
ti,hwmods = "ecap2";
status = "disabled";
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -750,10 +774,14 @@
status = "disabled";
ehrpwm3: pwm@48306200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
ti,hwmods = "ehrpwm3";
+ clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -768,10 +796,14 @@
status = "disabled";
ehrpwm4: pwm@48308200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
ti,hwmods = "ehrpwm4";
+ clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -786,9 +818,13 @@
status = "disabled";
ehrpwm5: pwm@4830a200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4830a200 0x80>;
+ clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm5";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index c3910e2..28a1064 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -248,31 +248,36 @@
status = "disabled";
};
ehrpwm0: pwm@01f00000 {
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
ehrpwm1: pwm@01f02000 {
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
ecap0: ecap@01f06000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
ecap1: ecap@01f07000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
ecap2: ecap@01f08000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
--
2.7.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 37+ messages in thread* Re: [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
2016-04-22 16:40 ` Franklin S Cooper Jr
@ 2016-04-25 13:03 ` Rob Herring
-1 siblings, 0 replies; 37+ messages in thread
From: Rob Herring @ 2016-04-25 13:03 UTC (permalink / raw)
To: Franklin S Cooper Jr
Cc: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, devicetree, vigneshr,
nsekhar
On Fri, Apr 22, 2016 at 11:40:34AM -0500, Franklin S Cooper Jr wrote:
> Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
> provide the various required clocks.
>
> For AM437 and AM335x, add the required clocks explicitly to DT. The
> hwmod entries for ECAP and EPWM will be removed and this will prevent
> anything from breaking.
>
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> ---
> .../devicetree/bindings/pwm/pwm-tiecap.txt | 12 +++--
> .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 12 +++--
> arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
> arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
> arch/arm/boot/dts/da850.dtsi | 15 ++++--
> 5 files changed, 95 insertions(+), 28 deletions(-)
[...]
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index 12fcde4..e858460 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -672,18 +672,26 @@
> status = "disabled";
>
> ecap0: ecap@48300100 {
> - compatible = "ti,am4372-ecap","ti,am33xx-ecap";
> + compatible = "ti,am4372-ecap",
This doesn't appear to be documented.
> + "ti,am3352-ecap",
> + "ti,am33xx-ecap";
> #pwm-cells = <3>;
> reg = <0x48300100 0x80>;
> ti,hwmods = "ecap0";
> + clocks = <&l4ls_gclk>;
> + clock-names = "fck";
> status = "disabled";
> };
>
> ehrpwm0: pwm@48300200 {
> - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
> + compatible = "ti,am4372-ehrpwm",
ditto.
> + "ti,am3352-ehrpwm",
> + "ti,am33xx-ehrpwm";
> #pwm-cells = <3>;
> reg = <0x48300200 0x80>;
> ti,hwmods = "ehrpwm0";
> + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
> + clock-names = "tbclk", "fck";
> status = "disabled";
> };
> };
^ permalink raw reply [flat|nested] 37+ messages in thread* [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
@ 2016-04-25 13:03 ` Rob Herring
0 siblings, 0 replies; 37+ messages in thread
From: Rob Herring @ 2016-04-25 13:03 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 22, 2016 at 11:40:34AM -0500, Franklin S Cooper Jr wrote:
> Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
> provide the various required clocks.
>
> For AM437 and AM335x, add the required clocks explicitly to DT. The
> hwmod entries for ECAP and EPWM will be removed and this will prevent
> anything from breaking.
>
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> ---
> .../devicetree/bindings/pwm/pwm-tiecap.txt | 12 +++--
> .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 12 +++--
> arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
> arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
> arch/arm/boot/dts/da850.dtsi | 15 ++++--
> 5 files changed, 95 insertions(+), 28 deletions(-)
[...]
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index 12fcde4..e858460 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -672,18 +672,26 @@
> status = "disabled";
>
> ecap0: ecap at 48300100 {
> - compatible = "ti,am4372-ecap","ti,am33xx-ecap";
> + compatible = "ti,am4372-ecap",
This doesn't appear to be documented.
> + "ti,am3352-ecap",
> + "ti,am33xx-ecap";
> #pwm-cells = <3>;
> reg = <0x48300100 0x80>;
> ti,hwmods = "ecap0";
> + clocks = <&l4ls_gclk>;
> + clock-names = "fck";
> status = "disabled";
> };
>
> ehrpwm0: pwm at 48300200 {
> - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
> + compatible = "ti,am4372-ehrpwm",
ditto.
> + "ti,am3352-ehrpwm",
> + "ti,am33xx-ehrpwm";
> #pwm-cells = <3>;
> reg = <0x48300200 0x80>;
> ti,hwmods = "ehrpwm0";
> + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
> + clock-names = "tbclk", "fck";
> status = "disabled";
> };
> };
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
2016-04-25 13:03 ` Rob Herring
(?)
@ 2016-04-26 13:22 ` Franklin S Cooper Jr.
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr. @ 2016-04-26 13:22 UTC (permalink / raw)
To: Rob Herring
Cc: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, devicetree, vigneshr,
nsekhar
On 04/25/2016 08:03 AM, Rob Herring wrote:
> On Fri, Apr 22, 2016 at 11:40:34AM -0500, Franklin S Cooper Jr wrote:
>> Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
>> provide the various required clocks.
>>
>> For AM437 and AM335x, add the required clocks explicitly to DT. The
>> hwmod entries for ECAP and EPWM will be removed and this will prevent
>> anything from breaking.
>>
>> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
>> ---
>> .../devicetree/bindings/pwm/pwm-tiecap.txt | 12 +++--
>> .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 12 +++--
>> arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
>> arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
>> arch/arm/boot/dts/da850.dtsi | 15 ++++--
>> 5 files changed, 95 insertions(+), 28 deletions(-)
>
> [...]
>
>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
>> index 12fcde4..e858460 100644
>> --- a/arch/arm/boot/dts/am4372.dtsi
>> +++ b/arch/arm/boot/dts/am4372.dtsi
>> @@ -672,18 +672,26 @@
>> status = "disabled";
>>
>> ecap0: ecap@48300100 {
>> - compatible = "ti,am4372-ecap","ti,am33xx-ecap";
>> + compatible = "ti,am4372-ecap",
>
> This doesn't appear to be documented.
>
>> + "ti,am3352-ecap",
>> + "ti,am33xx-ecap";
>> #pwm-cells = <3>;
>> reg = <0x48300100 0x80>;
>> ti,hwmods = "ecap0";
>> + clocks = <&l4ls_gclk>;
>> + clock-names = "fck";
>> status = "disabled";
>> };
>>
>> ehrpwm0: pwm@48300200 {
>> - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
>> + compatible = "ti,am4372-ehrpwm",
>
> ditto.
Will fix
>
>> + "ti,am3352-ehrpwm",
>> + "ti,am33xx-ehrpwm";
>> #pwm-cells = <3>;
>> reg = <0x48300200 0x80>;
>> ti,hwmods = "ehrpwm0";
>> + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
>> + clock-names = "tbclk", "fck";
>> status = "disabled";
>> };
>> };
^ permalink raw reply [flat|nested] 37+ messages in thread* [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
@ 2016-04-26 13:22 ` Franklin S Cooper Jr.
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr. @ 2016-04-26 13:22 UTC (permalink / raw)
To: linux-arm-kernel
On 04/25/2016 08:03 AM, Rob Herring wrote:
> On Fri, Apr 22, 2016 at 11:40:34AM -0500, Franklin S Cooper Jr wrote:
>> Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
>> provide the various required clocks.
>>
>> For AM437 and AM335x, add the required clocks explicitly to DT. The
>> hwmod entries for ECAP and EPWM will be removed and this will prevent
>> anything from breaking.
>>
>> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
>> ---
>> .../devicetree/bindings/pwm/pwm-tiecap.txt | 12 +++--
>> .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 12 +++--
>> arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
>> arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
>> arch/arm/boot/dts/da850.dtsi | 15 ++++--
>> 5 files changed, 95 insertions(+), 28 deletions(-)
>
> [...]
>
>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
>> index 12fcde4..e858460 100644
>> --- a/arch/arm/boot/dts/am4372.dtsi
>> +++ b/arch/arm/boot/dts/am4372.dtsi
>> @@ -672,18 +672,26 @@
>> status = "disabled";
>>
>> ecap0: ecap at 48300100 {
>> - compatible = "ti,am4372-ecap","ti,am33xx-ecap";
>> + compatible = "ti,am4372-ecap",
>
> This doesn't appear to be documented.
>
>> + "ti,am3352-ecap",
>> + "ti,am33xx-ecap";
>> #pwm-cells = <3>;
>> reg = <0x48300100 0x80>;
>> ti,hwmods = "ecap0";
>> + clocks = <&l4ls_gclk>;
>> + clock-names = "fck";
>> status = "disabled";
>> };
>>
>> ehrpwm0: pwm at 48300200 {
>> - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
>> + compatible = "ti,am4372-ehrpwm",
>
> ditto.
Will fix
>
>> + "ti,am3352-ehrpwm",
>> + "ti,am33xx-ehrpwm";
>> #pwm-cells = <3>;
>> reg = <0x48300200 0x80>;
>> ti,hwmods = "ehrpwm0";
>> + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
>> + clock-names = "tbclk", "fck";
>> status = "disabled";
>> };
>> };
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
@ 2016-04-26 13:22 ` Franklin S Cooper Jr.
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr. @ 2016-04-26 13:22 UTC (permalink / raw)
To: Rob Herring
Cc: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, devicetree, vigneshr,
nsekhar
On 04/25/2016 08:03 AM, Rob Herring wrote:
> On Fri, Apr 22, 2016 at 11:40:34AM -0500, Franklin S Cooper Jr wrote:
>> Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
>> provide the various required clocks.
>>
>> For AM437 and AM335x, add the required clocks explicitly to DT. The
>> hwmod entries for ECAP and EPWM will be removed and this will prevent
>> anything from breaking.
>>
>> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
>> ---
>> .../devicetree/bindings/pwm/pwm-tiecap.txt | 12 +++--
>> .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 12 +++--
>> arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
>> arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
>> arch/arm/boot/dts/da850.dtsi | 15 ++++--
>> 5 files changed, 95 insertions(+), 28 deletions(-)
>
> [...]
>
>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
>> index 12fcde4..e858460 100644
>> --- a/arch/arm/boot/dts/am4372.dtsi
>> +++ b/arch/arm/boot/dts/am4372.dtsi
>> @@ -672,18 +672,26 @@
>> status = "disabled";
>>
>> ecap0: ecap@48300100 {
>> - compatible = "ti,am4372-ecap","ti,am33xx-ecap";
>> + compatible = "ti,am4372-ecap",
>
> This doesn't appear to be documented.
>
>> + "ti,am3352-ecap",
>> + "ti,am33xx-ecap";
>> #pwm-cells = <3>;
>> reg = <0x48300100 0x80>;
>> ti,hwmods = "ecap0";
>> + clocks = <&l4ls_gclk>;
>> + clock-names = "fck";
>> status = "disabled";
>> };
>>
>> ehrpwm0: pwm@48300200 {
>> - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
>> + compatible = "ti,am4372-ehrpwm",
>
> ditto.
Will fix
>
>> + "ti,am3352-ehrpwm",
>> + "ti,am33xx-ehrpwm";
>> #pwm-cells = <3>;
>> reg = <0x48300200 0x80>;
>> ti,hwmods = "ehrpwm0";
>> + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
>> + clock-names = "tbclk", "fck";
>> status = "disabled";
>> };
>> };
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH v6 4/7] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings
2016-04-22 16:40 ` Franklin S Cooper Jr
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
When using the old eCAP and ePWM bindings for AM335x and AM437x the clock
can be retrieved from the PWMSS parent. Newer bindings will insure that
this clock is provided via device tree.
Therefore, update this driver to support the newer and older bindings. In
the case of the older binding being used give a warning.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
drivers/pwm/pwm-tiecap.c | 7 +++++++
drivers/pwm/pwm-tiehrpwm.c | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 616af76..a0833c8 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -195,6 +195,7 @@ static const struct pwm_ops ecap_pwm_ops = {
};
static const struct of_device_id ecap_of_match[] = {
+ { .compatible = "ti,am3352-ecap" },
{ .compatible = "ti,am33xx-ecap" },
{},
};
@@ -213,6 +214,12 @@ static int ecap_pwm_probe(struct platform_device *pdev)
return -ENOMEM;
clk = devm_clk_get(&pdev->dev, "fck");
+
+ if (IS_ERR(clk) && of_device_is_compatible(pdev->dev.of_node, "ti,am33xx-ecap")) {
+ dev_warn(&pdev->dev, "Binding is obsolete.\n");
+ clk = devm_clk_get(pdev->dev.parent, "fck");
+ }
+
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
return PTR_ERR(clk);
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 6a41e66..cee29a2 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -426,6 +426,7 @@ static const struct pwm_ops ehrpwm_pwm_ops = {
};
static const struct of_device_id ehrpwm_of_match[] = {
+ { .compatible = "ti,am3352-ehrpwm" },
{ .compatible = "ti,am33xx-ehrpwm" },
{},
};
@@ -444,6 +445,12 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
return -ENOMEM;
clk = devm_clk_get(&pdev->dev, "fck");
+
+ if (IS_ERR(clk) && of_device_is_compatible(pdev->dev.of_node, "ti,am33xx-ecap")) {
+ dev_warn(&pdev->dev, "Binding is obsolete.\n");
+ clk = devm_clk_get(pdev->dev.parent, "fck");
+ }
+
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
return PTR_ERR(clk);
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 4/7] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: linux-arm-kernel
When using the old eCAP and ePWM bindings for AM335x and AM437x the clock
can be retrieved from the PWMSS parent. Newer bindings will insure that
this clock is provided via device tree.
Therefore, update this driver to support the newer and older bindings. In
the case of the older binding being used give a warning.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
drivers/pwm/pwm-tiecap.c | 7 +++++++
drivers/pwm/pwm-tiehrpwm.c | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 616af76..a0833c8 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -195,6 +195,7 @@ static const struct pwm_ops ecap_pwm_ops = {
};
static const struct of_device_id ecap_of_match[] = {
+ { .compatible = "ti,am3352-ecap" },
{ .compatible = "ti,am33xx-ecap" },
{},
};
@@ -213,6 +214,12 @@ static int ecap_pwm_probe(struct platform_device *pdev)
return -ENOMEM;
clk = devm_clk_get(&pdev->dev, "fck");
+
+ if (IS_ERR(clk) && of_device_is_compatible(pdev->dev.of_node, "ti,am33xx-ecap")) {
+ dev_warn(&pdev->dev, "Binding is obsolete.\n");
+ clk = devm_clk_get(pdev->dev.parent, "fck");
+ }
+
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
return PTR_ERR(clk);
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 6a41e66..cee29a2 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -426,6 +426,7 @@ static const struct pwm_ops ehrpwm_pwm_ops = {
};
static const struct of_device_id ehrpwm_of_match[] = {
+ { .compatible = "ti,am3352-ehrpwm" },
{ .compatible = "ti,am33xx-ehrpwm" },
{},
};
@@ -444,6 +445,12 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
return -ENOMEM;
clk = devm_clk_get(&pdev->dev, "fck");
+
+ if (IS_ERR(clk) && of_device_is_compatible(pdev->dev.of_node, "ti,am33xx-ecap")) {
+ dev_warn(&pdev->dev, "Binding is obsolete.\n");
+ clk = devm_clk_get(pdev->dev.parent, "fck");
+ }
+
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
return PTR_ERR(clk);
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [PATCH v6 5/7] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
2016-04-22 16:40 ` Franklin S Cooper Jr
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
Previous patches switched the ECAP and EPWM to use the new bindings.
These bindings explicitly adds the various required clocks via DT rather
than depending on hwmod.
Therefore, it is safe to remove the hwmod entries since they are no longer
needed.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 3 ---
Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 3 ---
arch/arm/boot/dts/am33xx.dtsi | 6 ------
arch/arm/boot/dts/am4372.dtsi | 9 ---------
4 files changed, 21 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 5c7a116..39277b6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -10,8 +10,6 @@ Required properties:
- reg: physical base address and size of the registers map.
Optional properties:
-- ti,hwmods: Name of the hwmod associated to the ECAP:
- "ecap<x>", <x> being the 0-based instance number from the HW spec
- clocks: Handle to the ECAP's functional clock.
- clock-names: Must be set to "fck".
@@ -21,7 +19,6 @@ ecap0: ecap@0 { /* ECAP on am33xx */
compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
- ti,hwmods = "ecap0";
clocks = <&l4ls_gclk>;
clock-names = "fck";
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index a82e249..ac1eae6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -10,8 +10,6 @@ Required properties:
- reg: physical base address and size of the registers map.
Optional properties:
-- ti,hwmods: Name of the hwmod associated to the EHRPWM:
- "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
- clocks: Handle to the PWM's time-base and functional clock.
- clock-names: Must be set to "tbclk" and "fck".
@@ -23,7 +21,6 @@ ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
reg = <0x48300200 0x100>;
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
- ti,hwmods = "ehrpwm0";
};
ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 999ba2f..2661acc 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -687,7 +687,6 @@
clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
- ti,hwmods = "ecap0";
status = "disabled";
};
@@ -696,7 +695,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -723,7 +721,6 @@
clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
- ti,hwmods = "ecap1";
status = "disabled";
};
@@ -732,7 +729,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -759,7 +755,6 @@
clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
- ti,hwmods = "ecap2";
status = "disabled";
};
@@ -768,7 +763,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index e858460..cfdd4b7 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -677,7 +677,6 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
- ti,hwmods = "ecap0";
clocks = <&l4ls_gclk>;
clock-names = "fck";
status = "disabled";
@@ -689,7 +688,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -711,7 +709,6 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
- ti,hwmods = "ecap1";
clocks = <&l4ls_gclk>;
clock-names = "fck";
status = "disabled";
@@ -723,7 +720,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -747,7 +743,6 @@
reg = <0x48304100 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "fck";
- ti,hwmods = "ecap2";
status = "disabled";
};
@@ -757,7 +752,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -779,7 +773,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
- ti,hwmods = "ehrpwm3";
clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -801,7 +794,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
- ti,hwmods = "ehrpwm4";
clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -825,7 +817,6 @@
reg = <0x4830a200 0x80>;
clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
- ti,hwmods = "ehrpwm5";
status = "disabled";
};
};
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 5/7] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: linux-arm-kernel
Previous patches switched the ECAP and EPWM to use the new bindings.
These bindings explicitly adds the various required clocks via DT rather
than depending on hwmod.
Therefore, it is safe to remove the hwmod entries since they are no longer
needed.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 3 ---
Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 3 ---
arch/arm/boot/dts/am33xx.dtsi | 6 ------
arch/arm/boot/dts/am4372.dtsi | 9 ---------
4 files changed, 21 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 5c7a116..39277b6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -10,8 +10,6 @@ Required properties:
- reg: physical base address and size of the registers map.
Optional properties:
-- ti,hwmods: Name of the hwmod associated to the ECAP:
- "ecap<x>", <x> being the 0-based instance number from the HW spec
- clocks: Handle to the ECAP's functional clock.
- clock-names: Must be set to "fck".
@@ -21,7 +19,6 @@ ecap0: ecap at 0 { /* ECAP on am33xx */
compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
- ti,hwmods = "ecap0";
clocks = <&l4ls_gclk>;
clock-names = "fck";
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index a82e249..ac1eae6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -10,8 +10,6 @@ Required properties:
- reg: physical base address and size of the registers map.
Optional properties:
-- ti,hwmods: Name of the hwmod associated to the EHRPWM:
- "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
- clocks: Handle to the PWM's time-base and functional clock.
- clock-names: Must be set to "tbclk" and "fck".
@@ -23,7 +21,6 @@ ehrpwm0: pwm at 48300200 { /* EHRPWM on am33xx */
reg = <0x48300200 0x100>;
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
- ti,hwmods = "ehrpwm0";
};
ehrpwm0: pwm at 300000 { /* EHRPWM on da850 */
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 999ba2f..2661acc 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -687,7 +687,6 @@
clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
- ti,hwmods = "ecap0";
status = "disabled";
};
@@ -696,7 +695,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -723,7 +721,6 @@
clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
- ti,hwmods = "ecap1";
status = "disabled";
};
@@ -732,7 +729,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -759,7 +755,6 @@
clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
- ti,hwmods = "ecap2";
status = "disabled";
};
@@ -768,7 +763,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index e858460..cfdd4b7 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -677,7 +677,6 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
- ti,hwmods = "ecap0";
clocks = <&l4ls_gclk>;
clock-names = "fck";
status = "disabled";
@@ -689,7 +688,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -711,7 +709,6 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
- ti,hwmods = "ecap1";
clocks = <&l4ls_gclk>;
clock-names = "fck";
status = "disabled";
@@ -723,7 +720,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -747,7 +743,6 @@
reg = <0x48304100 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "fck";
- ti,hwmods = "ecap2";
status = "disabled";
};
@@ -757,7 +752,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -779,7 +773,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
- ti,hwmods = "ehrpwm3";
clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -801,7 +794,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
- ti,hwmods = "ehrpwm4";
clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -825,7 +817,6 @@
reg = <0x4830a200 0x80>;
clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
- ti,hwmods = "ehrpwm5";
status = "disabled";
};
};
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* Re: [PATCH v6 5/7] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
2016-04-22 16:40 ` Franklin S Cooper Jr
@ 2016-04-25 13:04 ` Rob Herring
-1 siblings, 0 replies; 37+ messages in thread
From: Rob Herring @ 2016-04-25 13:04 UTC (permalink / raw)
To: Franklin S Cooper Jr
Cc: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, devicetree, vigneshr,
nsekhar
On Fri, Apr 22, 2016 at 11:40:36AM -0500, Franklin S Cooper Jr wrote:
> Previous patches switched the ECAP and EPWM to use the new bindings.
> These bindings explicitly adds the various required clocks via DT rather
> than depending on hwmod.
>
> Therefore, it is safe to remove the hwmod entries since they are no longer
> needed.
>
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> ---
> Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 3 ---
> Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 3 ---
> arch/arm/boot/dts/am33xx.dtsi | 6 ------
> arch/arm/boot/dts/am4372.dtsi | 9 ---------
> 4 files changed, 21 deletions(-)
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH v6 5/7] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
@ 2016-04-25 13:04 ` Rob Herring
0 siblings, 0 replies; 37+ messages in thread
From: Rob Herring @ 2016-04-25 13:04 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 22, 2016 at 11:40:36AM -0500, Franklin S Cooper Jr wrote:
> Previous patches switched the ECAP and EPWM to use the new bindings.
> These bindings explicitly adds the various required clocks via DT rather
> than depending on hwmod.
>
> Therefore, it is safe to remove the hwmod entries since they are no longer
> needed.
>
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> ---
> Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 3 ---
> Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 3 ---
> arch/arm/boot/dts/am33xx.dtsi | 6 ------
> arch/arm/boot/dts/am4372.dtsi | 9 ---------
> 4 files changed, 21 deletions(-)
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH v6 6/7] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
2016-04-22 16:40 ` Franklin S Cooper Jr
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
Devices that utilize the OCP registers and/or PRCM registers and
register bit fields should be modeled using hwmod. Since eQEP, ePWM and
eCAP don't fall under this category, remove their hwmod entries.
Instead these clocks simply use the clock that is passed through by its
parent PWMSS. Therefore, PWMSS handles the clock for itself and its
subdevices.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
.../mach-omap2/omap_hwmod_33xx_43xx_common_data.h | 18 -----
.../omap_hwmod_33xx_43xx_interconnect_data.c | 64 -----------------
.../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 84 ----------------------
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 9 ---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 54 --------------
5 files changed, 229 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 7f73796..d3e61d1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -36,17 +36,8 @@ extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3;
extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2;
extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2;
extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3;
@@ -98,17 +89,8 @@ extern struct omap_hwmod am33xx_dcan0_hwmod;
extern struct omap_hwmod am33xx_dcan1_hwmod;
extern struct omap_hwmod am33xx_elm_hwmod;
extern struct omap_hwmod am33xx_epwmss0_hwmod;
-extern struct omap_hwmod am33xx_ecap0_hwmod;
-extern struct omap_hwmod am33xx_eqep0_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm0_hwmod;
extern struct omap_hwmod am33xx_epwmss1_hwmod;
-extern struct omap_hwmod am33xx_ecap1_hwmod;
-extern struct omap_hwmod am33xx_eqep1_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm1_hwmod;
extern struct omap_hwmod am33xx_epwmss2_hwmod;
-extern struct omap_hwmod am33xx_ecap2_hwmod;
-extern struct omap_hwmod am33xx_eqep2_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm2_hwmod;
extern struct omap_hwmod am33xx_gpio1_hwmod;
extern struct omap_hwmod am33xx_gpio2_hwmod;
extern struct omap_hwmod am33xx_gpio3_hwmod;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index 1c210cb..10dff2f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -176,28 +176,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_ecap0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_eqep0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_ehrpwm0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-
static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
{
.pa_start = 0x48302000,
@@ -215,27 +193,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_ecap1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_eqep1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_ehrpwm1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
{
.pa_start = 0x48304000,
@@ -253,27 +210,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_ecap2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_eqep2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_ehrpwm2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
/* l3s cfg -> gpmc */
struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.master = &am33xx_l3_s_hwmod,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index aed3362..6a73b6c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -449,18 +449,6 @@ struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
.sysc = &am33xx_epwmss_sysc,
};
-static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
- .name = "ecap",
-};
-
-static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
- .name = "eqep",
-};
-
-struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
- .name = "ehrpwm",
-};
-
/* epwmss0 */
struct omap_hwmod am33xx_epwmss0_hwmod = {
.name = "epwmss0",
@@ -474,30 +462,6 @@ struct omap_hwmod am33xx_epwmss0_hwmod = {
},
};
-/* ecap0 */
-struct omap_hwmod am33xx_ecap0_hwmod = {
- .name = "ecap0",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep0 */
-struct omap_hwmod am33xx_eqep0_hwmod = {
- .name = "eqep0",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm0 */
-struct omap_hwmod am33xx_ehrpwm0_hwmod = {
- .name = "ehrpwm0",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/* epwmss1 */
struct omap_hwmod am33xx_epwmss1_hwmod = {
.name = "epwmss1",
@@ -511,30 +475,6 @@ struct omap_hwmod am33xx_epwmss1_hwmod = {
},
};
-/* ecap1 */
-struct omap_hwmod am33xx_ecap1_hwmod = {
- .name = "ecap1",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep1 */
-struct omap_hwmod am33xx_eqep1_hwmod = {
- .name = "eqep1",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm1 */
-struct omap_hwmod am33xx_ehrpwm1_hwmod = {
- .name = "ehrpwm1",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/* epwmss2 */
struct omap_hwmod am33xx_epwmss2_hwmod = {
.name = "epwmss2",
@@ -548,30 +488,6 @@ struct omap_hwmod am33xx_epwmss2_hwmod = {
},
};
-/* ecap2 */
-struct omap_hwmod am33xx_ecap2_hwmod = {
- .name = "ecap2",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep2 */
-struct omap_hwmod am33xx_eqep2_hwmod = {
- .name = "eqep2",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm2 */
-struct omap_hwmod am33xx_ehrpwm2_hwmod = {
- .name = "ehrpwm2",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/*
* 'gpio' class: for gpio 0,1,2,3
*/
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index cc0791d..e1c2025 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -593,17 +593,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_ls__spinlock,
&am33xx_l4_ls__elm,
&am33xx_l4_ls__epwmss0,
- &am33xx_epwmss0__ecap0,
- &am33xx_epwmss0__eqep0,
- &am33xx_epwmss0__ehrpwm0,
&am33xx_l4_ls__epwmss1,
- &am33xx_epwmss1__ecap1,
- &am33xx_epwmss1__eqep1,
- &am33xx_epwmss1__ehrpwm1,
&am33xx_l4_ls__epwmss2,
- &am33xx_epwmss2__ecap2,
- &am33xx_epwmss2__eqep2,
- &am33xx_epwmss2__ehrpwm2,
&am33xx_l3_s__gpmc,
&am33xx_l3_main__lcdc,
&am33xx_l4_ls__mcspi0,
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 97fd399..61f2f30 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -202,13 +202,6 @@ static struct omap_hwmod am43xx_epwmss3_hwmod = {
},
};
-static struct omap_hwmod am43xx_ehrpwm3_hwmod = {
- .name = "ehrpwm3",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_epwmss4_hwmod = {
.name = "epwmss4",
.class = &am33xx_epwmss_hwmod_class,
@@ -222,13 +215,6 @@ static struct omap_hwmod am43xx_epwmss4_hwmod = {
},
};
-static struct omap_hwmod am43xx_ehrpwm4_hwmod = {
- .name = "ehrpwm4",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_epwmss5_hwmod = {
.name = "epwmss5",
.class = &am33xx_epwmss_hwmod_class,
@@ -242,13 +228,6 @@ static struct omap_hwmod am43xx_epwmss5_hwmod = {
},
};
-static struct omap_hwmod am43xx_ehrpwm5_hwmod = {
- .name = "ehrpwm5",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_spi2_hwmod = {
.name = "spi2",
.class = &am33xx_spi_hwmod_class,
@@ -744,13 +723,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = {
- .master = &am43xx_epwmss3_hwmod,
- .slave = &am43xx_ehrpwm3_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_epwmss4_hwmod,
@@ -758,13 +730,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = {
- .master = &am43xx_epwmss4_hwmod,
- .slave = &am43xx_ehrpwm4_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_epwmss5_hwmod,
@@ -772,13 +737,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = {
- .master = &am43xx_epwmss5_hwmod,
- .slave = &am43xx_ehrpwm5_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_spi2_hwmod,
@@ -919,11 +877,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__timer10,
&am43xx_l4_ls__timer11,
&am43xx_l4_ls__epwmss3,
- &am43xx_epwmss3__ehrpwm3,
&am43xx_l4_ls__epwmss4,
- &am43xx_epwmss4__ehrpwm4,
&am43xx_l4_ls__epwmss5,
- &am43xx_epwmss5__ehrpwm5,
&am43xx_l4_ls__mcspi2,
&am43xx_l4_ls__mcspi3,
&am43xx_l4_ls__mcspi4,
@@ -982,17 +937,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_ls__spinlock,
&am33xx_l4_ls__elm,
&am33xx_l4_ls__epwmss0,
- &am33xx_epwmss0__ecap0,
- &am33xx_epwmss0__eqep0,
- &am33xx_epwmss0__ehrpwm0,
&am33xx_l4_ls__epwmss1,
- &am33xx_epwmss1__ecap1,
- &am33xx_epwmss1__eqep1,
- &am33xx_epwmss1__ehrpwm1,
&am33xx_l4_ls__epwmss2,
- &am33xx_epwmss2__ecap2,
- &am33xx_epwmss2__eqep2,
- &am33xx_epwmss2__ehrpwm2,
&am33xx_l3_s__gpmc,
&am33xx_l4_ls__mcspi0,
&am33xx_l4_ls__mcspi1,
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 6/7] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: linux-arm-kernel
Devices that utilize the OCP registers and/or PRCM registers and
register bit fields should be modeled using hwmod. Since eQEP, ePWM and
eCAP don't fall under this category, remove their hwmod entries.
Instead these clocks simply use the clock that is passed through by its
parent PWMSS. Therefore, PWMSS handles the clock for itself and its
subdevices.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
.../mach-omap2/omap_hwmod_33xx_43xx_common_data.h | 18 -----
.../omap_hwmod_33xx_43xx_interconnect_data.c | 64 -----------------
.../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 84 ----------------------
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 9 ---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 54 --------------
5 files changed, 229 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 7f73796..d3e61d1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -36,17 +36,8 @@ extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3;
extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2;
extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2;
extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3;
@@ -98,17 +89,8 @@ extern struct omap_hwmod am33xx_dcan0_hwmod;
extern struct omap_hwmod am33xx_dcan1_hwmod;
extern struct omap_hwmod am33xx_elm_hwmod;
extern struct omap_hwmod am33xx_epwmss0_hwmod;
-extern struct omap_hwmod am33xx_ecap0_hwmod;
-extern struct omap_hwmod am33xx_eqep0_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm0_hwmod;
extern struct omap_hwmod am33xx_epwmss1_hwmod;
-extern struct omap_hwmod am33xx_ecap1_hwmod;
-extern struct omap_hwmod am33xx_eqep1_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm1_hwmod;
extern struct omap_hwmod am33xx_epwmss2_hwmod;
-extern struct omap_hwmod am33xx_ecap2_hwmod;
-extern struct omap_hwmod am33xx_eqep2_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm2_hwmod;
extern struct omap_hwmod am33xx_gpio1_hwmod;
extern struct omap_hwmod am33xx_gpio2_hwmod;
extern struct omap_hwmod am33xx_gpio3_hwmod;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index 1c210cb..10dff2f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -176,28 +176,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_ecap0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_eqep0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
- .master = &am33xx_epwmss0_hwmod,
- .slave = &am33xx_ehrpwm0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-
static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
{
.pa_start = 0x48302000,
@@ -215,27 +193,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_ecap1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_eqep1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
- .master = &am33xx_epwmss1_hwmod,
- .slave = &am33xx_ehrpwm1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
{
.pa_start = 0x48304000,
@@ -253,27 +210,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
.user = OCP_USER_MPU,
};
-struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_ecap2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_eqep2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
- .master = &am33xx_epwmss2_hwmod,
- .slave = &am33xx_ehrpwm2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
/* l3s cfg -> gpmc */
struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.master = &am33xx_l3_s_hwmod,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index aed3362..6a73b6c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -449,18 +449,6 @@ struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
.sysc = &am33xx_epwmss_sysc,
};
-static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
- .name = "ecap",
-};
-
-static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
- .name = "eqep",
-};
-
-struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
- .name = "ehrpwm",
-};
-
/* epwmss0 */
struct omap_hwmod am33xx_epwmss0_hwmod = {
.name = "epwmss0",
@@ -474,30 +462,6 @@ struct omap_hwmod am33xx_epwmss0_hwmod = {
},
};
-/* ecap0 */
-struct omap_hwmod am33xx_ecap0_hwmod = {
- .name = "ecap0",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep0 */
-struct omap_hwmod am33xx_eqep0_hwmod = {
- .name = "eqep0",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm0 */
-struct omap_hwmod am33xx_ehrpwm0_hwmod = {
- .name = "ehrpwm0",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/* epwmss1 */
struct omap_hwmod am33xx_epwmss1_hwmod = {
.name = "epwmss1",
@@ -511,30 +475,6 @@ struct omap_hwmod am33xx_epwmss1_hwmod = {
},
};
-/* ecap1 */
-struct omap_hwmod am33xx_ecap1_hwmod = {
- .name = "ecap1",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep1 */
-struct omap_hwmod am33xx_eqep1_hwmod = {
- .name = "eqep1",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm1 */
-struct omap_hwmod am33xx_ehrpwm1_hwmod = {
- .name = "ehrpwm1",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/* epwmss2 */
struct omap_hwmod am33xx_epwmss2_hwmod = {
.name = "epwmss2",
@@ -548,30 +488,6 @@ struct omap_hwmod am33xx_epwmss2_hwmod = {
},
};
-/* ecap2 */
-struct omap_hwmod am33xx_ecap2_hwmod = {
- .name = "ecap2",
- .class = &am33xx_ecap_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* eqep2 */
-struct omap_hwmod am33xx_eqep2_hwmod = {
- .name = "eqep2",
- .class = &am33xx_eqep_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
-/* ehrpwm2 */
-struct omap_hwmod am33xx_ehrpwm2_hwmod = {
- .name = "ehrpwm2",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
/*
* 'gpio' class: for gpio 0,1,2,3
*/
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index cc0791d..e1c2025 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -593,17 +593,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_ls__spinlock,
&am33xx_l4_ls__elm,
&am33xx_l4_ls__epwmss0,
- &am33xx_epwmss0__ecap0,
- &am33xx_epwmss0__eqep0,
- &am33xx_epwmss0__ehrpwm0,
&am33xx_l4_ls__epwmss1,
- &am33xx_epwmss1__ecap1,
- &am33xx_epwmss1__eqep1,
- &am33xx_epwmss1__ehrpwm1,
&am33xx_l4_ls__epwmss2,
- &am33xx_epwmss2__ecap2,
- &am33xx_epwmss2__eqep2,
- &am33xx_epwmss2__ehrpwm2,
&am33xx_l3_s__gpmc,
&am33xx_l3_main__lcdc,
&am33xx_l4_ls__mcspi0,
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 97fd399..61f2f30 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -202,13 +202,6 @@ static struct omap_hwmod am43xx_epwmss3_hwmod = {
},
};
-static struct omap_hwmod am43xx_ehrpwm3_hwmod = {
- .name = "ehrpwm3",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_epwmss4_hwmod = {
.name = "epwmss4",
.class = &am33xx_epwmss_hwmod_class,
@@ -222,13 +215,6 @@ static struct omap_hwmod am43xx_epwmss4_hwmod = {
},
};
-static struct omap_hwmod am43xx_ehrpwm4_hwmod = {
- .name = "ehrpwm4",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_epwmss5_hwmod = {
.name = "epwmss5",
.class = &am33xx_epwmss_hwmod_class,
@@ -242,13 +228,6 @@ static struct omap_hwmod am43xx_epwmss5_hwmod = {
},
};
-static struct omap_hwmod am43xx_ehrpwm5_hwmod = {
- .name = "ehrpwm5",
- .class = &am33xx_ehrpwm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
-};
-
static struct omap_hwmod am43xx_spi2_hwmod = {
.name = "spi2",
.class = &am33xx_spi_hwmod_class,
@@ -744,13 +723,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = {
- .master = &am43xx_epwmss3_hwmod,
- .slave = &am43xx_ehrpwm3_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_epwmss4_hwmod,
@@ -758,13 +730,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = {
- .master = &am43xx_epwmss4_hwmod,
- .slave = &am43xx_ehrpwm4_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_epwmss5_hwmod,
@@ -772,13 +737,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = {
- .master = &am43xx_epwmss5_hwmod,
- .slave = &am43xx_ehrpwm5_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am43xx_spi2_hwmod,
@@ -919,11 +877,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__timer10,
&am43xx_l4_ls__timer11,
&am43xx_l4_ls__epwmss3,
- &am43xx_epwmss3__ehrpwm3,
&am43xx_l4_ls__epwmss4,
- &am43xx_epwmss4__ehrpwm4,
&am43xx_l4_ls__epwmss5,
- &am43xx_epwmss5__ehrpwm5,
&am43xx_l4_ls__mcspi2,
&am43xx_l4_ls__mcspi3,
&am43xx_l4_ls__mcspi4,
@@ -982,17 +937,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_ls__spinlock,
&am33xx_l4_ls__elm,
&am33xx_l4_ls__epwmss0,
- &am33xx_epwmss0__ecap0,
- &am33xx_epwmss0__eqep0,
- &am33xx_epwmss0__ehrpwm0,
&am33xx_l4_ls__epwmss1,
- &am33xx_epwmss1__ecap1,
- &am33xx_epwmss1__eqep1,
- &am33xx_epwmss1__ehrpwm1,
&am33xx_l4_ls__epwmss2,
- &am33xx_epwmss2__ecap2,
- &am33xx_epwmss2__eqep2,
- &am33xx_epwmss2__ehrpwm2,
&am33xx_l3_s__gpmc,
&am33xx_l4_ls__mcspi0,
&am33xx_l4_ls__mcspi1,
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [PATCH v6 7/7] ARM: dts: DRA7: Add dt nodes for PWMSS
2016-04-22 16:40 ` Franklin S Cooper Jr
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
Cc: Franklin S Cooper Jr
From: Vignesh R <vigneshr@ti.com>
Add PWMSS device tree nodes for DRA7 SoC family and add documentation
for dt bindings.
Signed-off-by: Vignesh R <vigneshr@ti.com>
[fcooper@ti.com: Add eCAP and use updated bindings for PWMSS and ePWM]
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
.../devicetree/bindings/pwm/pwm-tiecap.txt | 9 +++
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 9 +++
.../devicetree/bindings/pwm/pwm-tipwmss.txt | 15 +++-
arch/arm/boot/dts/dra7.dtsi | 90 ++++++++++++++++++++++
4 files changed, 122 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 39277b6..2e1c1f1 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Must be "ti,<soc>-ecap".
for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+ for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The PWM channel index ranges from 0 to 4. The only third
cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -28,3 +29,11 @@ ecap0: ecap@0 { /* ECAP on da850 */
#pwm-cells = <3>;
reg = <0x306000 0x80>;
};
+
+ecap0: ecap@4843e100 {
+ compatible = "ti,dra746-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index ac1eae6..7eaae2a 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Must be "ti,<soc>-ehrpwm".
for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
@@ -28,3 +29,11 @@ ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
};
+
+ehrpwm0: pwm@4843e200 { /* EHRPWM on dra746 */
+ compatible = "ti,dra746-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48440200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
index f7eae77..29945ed 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -1,7 +1,9 @@
TI SOC based PWM Subsystem
Required properties:
-- compatible: Must be "ti,am33xx-pwmss";
+- compatible: Must be "ti,<soc>-pwmss".
+ for am33xx - compatible = "ti,am33xx-pwmss"
+ for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"
- reg: physical base address and size of the registers map.
- address-cells: Specify the number of u32 entries needed in child nodes.
Should set to 1.
@@ -29,3 +31,14 @@ pwmss0: pwmss@48300000 {
/* child nodes go here */
};
+
+epwmss0: epwmss@4843e000 { /* On DRA7xx */
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* child nodes go here */
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e007401..5a21e46 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1743,6 +1743,96 @@
clock-names = "fck", "sys_clk";
};
};
+
+ epwmss0: epwmss@4843e000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm0: pwm@4843e200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x4843e200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap0: ecap@4843e100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss1: epwmss@48440000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48440000 0x30>;
+ ti,hwmods = "epwmss1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm1: pwm@48440200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48440200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap1: ecap@48440100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48440100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss2: epwmss@48442000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48442000 0x30>;
+ ti,hwmods = "epwmss2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm2: pwm@48442200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48442200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap2: ecap@48442100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48442100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
};
thermal_zones: thermal-zones {
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* [PATCH v6 7/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-22 16:40 ` Franklin S Cooper Jr
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr @ 2016-04-22 16:40 UTC (permalink / raw)
To: linux-arm-kernel
From: Vignesh R <vigneshr@ti.com>
Add PWMSS device tree nodes for DRA7 SoC family and add documentation
for dt bindings.
Signed-off-by: Vignesh R <vigneshr@ti.com>
[fcooper at ti.com: Add eCAP and use updated bindings for PWMSS and ePWM]
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
.../devicetree/bindings/pwm/pwm-tiecap.txt | 9 +++
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 9 +++
.../devicetree/bindings/pwm/pwm-tipwmss.txt | 15 +++-
arch/arm/boot/dts/dra7.dtsi | 90 ++++++++++++++++++++++
4 files changed, 122 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 39277b6..2e1c1f1 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Must be "ti,<soc>-ecap".
for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+ for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The PWM channel index ranges from 0 to 4. The only third
cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -28,3 +29,11 @@ ecap0: ecap at 0 { /* ECAP on da850 */
#pwm-cells = <3>;
reg = <0x306000 0x80>;
};
+
+ecap0: ecap at 4843e100 {
+ compatible = "ti,dra746-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index ac1eae6..7eaae2a 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Must be "ti,<soc>-ehrpwm".
for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
@@ -28,3 +29,11 @@ ehrpwm0: pwm at 300000 { /* EHRPWM on da850 */
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
};
+
+ehrpwm0: pwm at 4843e200 { /* EHRPWM on dra746 */
+ compatible = "ti,dra746-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48440200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
index f7eae77..29945ed 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -1,7 +1,9 @@
TI SOC based PWM Subsystem
Required properties:
-- compatible: Must be "ti,am33xx-pwmss";
+- compatible: Must be "ti,<soc>-pwmss".
+ for am33xx - compatible = "ti,am33xx-pwmss"
+ for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"
- reg: physical base address and size of the registers map.
- address-cells: Specify the number of u32 entries needed in child nodes.
Should set to 1.
@@ -29,3 +31,14 @@ pwmss0: pwmss at 48300000 {
/* child nodes go here */
};
+
+epwmss0: epwmss at 4843e000 { /* On DRA7xx */
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* child nodes go here */
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e007401..5a21e46 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1743,6 +1743,96 @@
clock-names = "fck", "sys_clk";
};
};
+
+ epwmss0: epwmss at 4843e000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm0: pwm at 4843e200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x4843e200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap0: ecap at 4843e100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss1: epwmss at 48440000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48440000 0x30>;
+ ti,hwmods = "epwmss1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm1: pwm at 48440200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48440200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap1: ecap at 48440100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48440100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss2: epwmss at 48442000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48442000 0x30>;
+ ti,hwmods = "epwmss2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm2: pwm at 48442200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48442200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap2: ecap at 48442100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48442100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
};
thermal_zones: thermal-zones {
--
2.7.0
^ permalink raw reply related [flat|nested] 37+ messages in thread* Re: [PATCH v6 7/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-25 13:05 ` Rob Herring
0 siblings, 0 replies; 37+ messages in thread
From: Rob Herring @ 2016-04-25 13:05 UTC (permalink / raw)
To: Franklin S Cooper Jr
Cc: thierry.reding, tony, paul, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, devicetree, vigneshr,
nsekhar
On Fri, Apr 22, 2016 at 11:40:38AM -0500, Franklin S Cooper Jr wrote:
> From: Vignesh R <vigneshr@ti.com>
>
> Add PWMSS device tree nodes for DRA7 SoC family and add documentation
> for dt bindings.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> [fcooper@ti.com: Add eCAP and use updated bindings for PWMSS and ePWM]
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> ---
> .../devicetree/bindings/pwm/pwm-tiecap.txt | 9 +++
> .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 9 +++
> .../devicetree/bindings/pwm/pwm-tipwmss.txt | 15 +++-
> arch/arm/boot/dts/dra7.dtsi | 90 ++++++++++++++++++++++
> 4 files changed, 122 insertions(+), 1 deletion(-)
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH v6 7/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-25 13:05 ` Rob Herring
0 siblings, 0 replies; 37+ messages in thread
From: Rob Herring @ 2016-04-25 13:05 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 22, 2016 at 11:40:38AM -0500, Franklin S Cooper Jr wrote:
> From: Vignesh R <vigneshr@ti.com>
>
> Add PWMSS device tree nodes for DRA7 SoC family and add documentation
> for dt bindings.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> [fcooper at ti.com: Add eCAP and use updated bindings for PWMSS and ePWM]
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> ---
> .../devicetree/bindings/pwm/pwm-tiecap.txt | 9 +++
> .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 9 +++
> .../devicetree/bindings/pwm/pwm-tipwmss.txt | 15 +++-
> arch/arm/boot/dts/dra7.dtsi | 90 ++++++++++++++++++++++
> 4 files changed, 122 insertions(+), 1 deletion(-)
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH v6 7/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-25 13:05 ` Rob Herring
0 siblings, 0 replies; 37+ messages in thread
From: Rob Herring @ 2016-04-25 13:05 UTC (permalink / raw)
To: Franklin S Cooper Jr
Cc: thierry.reding-Re5JQEeQqe8AvxtiuMwx3w,
tony-4v6yS6AI5VpBDgjK7y7TUQ, paul-DWxLp4Yu+b8AvxtiuMwx3w,
t-kristo-l0cyMroinI0, linux-pwm-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, vigneshr-l0cyMroinI0,
nsekhar-l0cyMroinI0
On Fri, Apr 22, 2016 at 11:40:38AM -0500, Franklin S Cooper Jr wrote:
> From: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
>
> Add PWMSS device tree nodes for DRA7 SoC family and add documentation
> for dt bindings.
>
> Signed-off-by: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
> [fcooper-l0cyMroinI0@public.gmane.org: Add eCAP and use updated bindings for PWMSS and ePWM]
> Signed-off-by: Franklin S Cooper Jr <fcooper-l0cyMroinI0@public.gmane.org>
> ---
> .../devicetree/bindings/pwm/pwm-tiecap.txt | 9 +++
> .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 9 +++
> .../devicetree/bindings/pwm/pwm-tipwmss.txt | 15 +++-
> arch/arm/boot/dts/dra7.dtsi | 90 ++++++++++++++++++++++
> 4 files changed, 122 insertions(+), 1 deletion(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
2016-04-22 16:40 ` Franklin S Cooper Jr
@ 2016-04-25 16:18 ` Paul Walmsley
-1 siblings, 0 replies; 37+ messages in thread
From: Paul Walmsley @ 2016-04-25 16:18 UTC (permalink / raw)
To: Franklin S Cooper Jr
Cc: thierry.reding, tony, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
On Fri, 22 Apr 2016, Franklin S Cooper Jr wrote:
> This patch series adds support for PWM for DRA7. The IP is the same as the
> one present in AM33XX and AM437XX.
>
> However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
> and eQEP.
Just took a quick look (nothing indepth). Looks OK.
Once Rob's issues have been addressed, please feel free to add an
Acked-by: from me. Thanks for playing along, Franklin, I think this final
product makes the most sense from a device architecture point of view.
- Paul
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-25 16:18 ` Paul Walmsley
0 siblings, 0 replies; 37+ messages in thread
From: Paul Walmsley @ 2016-04-25 16:18 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 22 Apr 2016, Franklin S Cooper Jr wrote:
> This patch series adds support for PWM for DRA7. The IP is the same as the
> one present in AM33XX and AM437XX.
>
> However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
> and eQEP.
Just took a quick look (nothing indepth). Looks OK.
Once Rob's issues have been addressed, please feel free to add an
Acked-by: from me. Thanks for playing along, Franklin, I think this final
product makes the most sense from a device architecture point of view.
- Paul
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
2016-04-25 16:18 ` Paul Walmsley
(?)
@ 2016-04-26 13:22 ` Franklin S Cooper Jr.
-1 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr. @ 2016-04-26 13:22 UTC (permalink / raw)
To: Paul Walmsley
Cc: thierry.reding, tony, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
On 04/25/2016 11:18 AM, Paul Walmsley wrote:
> On Fri, 22 Apr 2016, Franklin S Cooper Jr wrote:
>
>> This patch series adds support for PWM for DRA7. The IP is the same as the
>> one present in AM33XX and AM437XX.
>>
>> However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
>> and eQEP.
>
> Just took a quick look (nothing indepth). Looks OK.
>
> Once Rob's issues have been addressed, please feel free to add an
> Acked-by: from me. Thanks for playing along, Franklin, I think this final
> product makes the most sense from a device architecture point of view.
Thanks Paul. Just to be clear I can add your Acked-by to all 7 patches?
>
>
> - Paul
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-26 13:22 ` Franklin S Cooper Jr.
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr. @ 2016-04-26 13:22 UTC (permalink / raw)
To: linux-arm-kernel
On 04/25/2016 11:18 AM, Paul Walmsley wrote:
> On Fri, 22 Apr 2016, Franklin S Cooper Jr wrote:
>
>> This patch series adds support for PWM for DRA7. The IP is the same as the
>> one present in AM33XX and AM437XX.
>>
>> However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
>> and eQEP.
>
> Just took a quick look (nothing indepth). Looks OK.
>
> Once Rob's issues have been addressed, please feel free to add an
> Acked-by: from me. Thanks for playing along, Franklin, I think this final
> product makes the most sense from a device architecture point of view.
Thanks Paul. Just to be clear I can add your Acked-by to all 7 patches?
>
>
> - Paul
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-26 13:22 ` Franklin S Cooper Jr.
0 siblings, 0 replies; 37+ messages in thread
From: Franklin S Cooper Jr. @ 2016-04-26 13:22 UTC (permalink / raw)
To: Paul Walmsley
Cc: thierry.reding, tony, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
On 04/25/2016 11:18 AM, Paul Walmsley wrote:
> On Fri, 22 Apr 2016, Franklin S Cooper Jr wrote:
>
>> This patch series adds support for PWM for DRA7. The IP is the same as the
>> one present in AM33XX and AM437XX.
>>
>> However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
>> and eQEP.
>
> Just took a quick look (nothing indepth). Looks OK.
>
> Once Rob's issues have been addressed, please feel free to add an
> Acked-by: from me. Thanks for playing along, Franklin, I think this final
> product makes the most sense from a device architecture point of view.
Thanks Paul. Just to be clear I can add your Acked-by to all 7 patches?
>
>
> - Paul
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
2016-04-26 13:22 ` Franklin S Cooper Jr.
@ 2016-04-26 14:27 ` Paul Walmsley
-1 siblings, 0 replies; 37+ messages in thread
From: Paul Walmsley @ 2016-04-26 14:27 UTC (permalink / raw)
To: Franklin S Cooper Jr.
Cc: thierry.reding, tony, t-kristo, linux-pwm, linux-kernel,
linux-omap, linux-arm-kernel, linux-clk, robh+dt, devicetree,
vigneshr, nsekhar
On Tue, 26 Apr 2016, Franklin S Cooper Jr. wrote:
>
>
> On 04/25/2016 11:18 AM, Paul Walmsley wrote:
> > On Fri, 22 Apr 2016, Franklin S Cooper Jr wrote:
> >
> >> This patch series adds support for PWM for DRA7. The IP is the same as the
> >> one present in AM33XX and AM437XX.
> >>
> >> However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
> >> and eQEP.
> >
> > Just took a quick look (nothing indepth). Looks OK.
> >
> > Once Rob's issues have been addressed, please feel free to add an
> > Acked-by: from me. Thanks for playing along, Franklin, I think this final
> > product makes the most sense from a device architecture point of view.
>
>
> Thanks Paul. Just to be clear I can add your Acked-by to all 7 patches?
I'd suggest just adding it to the ones that are hwmod-related in either
the commit message or the code.
- Paul
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
@ 2016-04-26 14:27 ` Paul Walmsley
0 siblings, 0 replies; 37+ messages in thread
From: Paul Walmsley @ 2016-04-26 14:27 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, 26 Apr 2016, Franklin S Cooper Jr. wrote:
>
>
> On 04/25/2016 11:18 AM, Paul Walmsley wrote:
> > On Fri, 22 Apr 2016, Franklin S Cooper Jr wrote:
> >
> >> This patch series adds support for PWM for DRA7. The IP is the same as the
> >> one present in AM33XX and AM437XX.
> >>
> >> However, before doing so remove unnecessary hwmod entries for eCAP, ePWM
> >> and eQEP.
> >
> > Just took a quick look (nothing indepth). Looks OK.
> >
> > Once Rob's issues have been addressed, please feel free to add an
> > Acked-by: from me. Thanks for playing along, Franklin, I think this final
> > product makes the most sense from a device architecture point of view.
>
>
> Thanks Paul. Just to be clear I can add your Acked-by to all 7 patches?
I'd suggest just adding it to the ones that are hwmod-related in either
the commit message or the code.
- Paul
^ permalink raw reply [flat|nested] 37+ messages in thread