* [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt
@ 2016-04-26 11:40 Shannon Zhao
2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 1/3] target-arm: kvm64: set guest PMUv3 feature bit if supported Shannon Zhao
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Shannon Zhao @ 2016-04-26 11:40 UTC (permalink / raw)
To: qemu-arm, peter.maydell
Cc: qemu-devel, drjones, peter.huangpeng, shannon.zhao
From: Shannon Zhao <shannon.zhao@linaro.org>
KVM-ARM64 supports guest PMU now. This series add the support in machine
virt so that guest could use PMU.
The ACPI part is tested with below guest kernel patches.
https://lkml.org/lkml/2016/4/12/755
Changes since v3:
* if kvm_arm_pmu_create returns a failure, don't create pmu dts node for
guest
Changes since v2:
* address Andrew's comments on PATCH 2, thanks
Changes since v1:
* rebase on master
* Address Andrew's comments, add a macro PPI, fix code style, add
cpu_to_le32()
Shannon Zhao (3):
target-arm: kvm64: set guest PMUv3 feature bit if supported
hw/arm/virt: Add PMU node for virt machine
hw/arm/virt-acpi-build: Add PMU IRQ number in ACPI table
hw/arm/virt-acpi-build.c | 3 +++
hw/arm/virt.c | 33 +++++++++++++++++++++++++++++++++
include/hw/arm/virt.h | 4 ++++
include/sysemu/kvm.h | 1 +
stubs/kvm.c | 5 +++++
target-arm/cpu-qom.h | 2 ++
target-arm/kvm64.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 94 insertions(+)
--
2.0.4
^ permalink raw reply [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v4 1/3] target-arm: kvm64: set guest PMUv3 feature bit if supported 2016-04-26 11:40 [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt Shannon Zhao @ 2016-04-26 11:40 ` Shannon Zhao 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine Shannon Zhao ` (2 subsequent siblings) 3 siblings, 0 replies; 8+ messages in thread From: Shannon Zhao @ 2016-04-26 11:40 UTC (permalink / raw) To: qemu-arm, peter.maydell Cc: qemu-devel, drjones, peter.huangpeng, shannon.zhao From: Shannon Zhao <shannon.zhao@linaro.org> Check if kvm supports guest PMUv3. If so, set the corresponding feature bit for vcpu. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> --- target-arm/cpu-qom.h | 2 ++ target-arm/kvm64.c | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h index 1061c08..93aa6a4 100644 --- a/target-arm/cpu-qom.h +++ b/target-arm/cpu-qom.h @@ -105,6 +105,8 @@ typedef struct ARMCPU { bool powered_off; /* CPU has security extension */ bool has_el3; + /* CPU has PMU (Performance Monitor Unit) */ + bool has_pmu; /* CPU has memory protection unit */ bool has_mpu; diff --git a/target-arm/kvm64.c b/target-arm/kvm64.c index e8527bf..b364789 100644 --- a/target-arm/kvm64.c +++ b/target-arm/kvm64.c @@ -461,6 +461,11 @@ int kvm_arch_init_vcpu(CPUState *cs) if (!arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_EL1_32BIT; } + if (kvm_irqchip_in_kernel() && + kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PMU_V3)) { + cpu->has_pmu = true; + cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_PMU_V3; + } /* Do KVM_ARM_VCPU_INIT ioctl */ ret = kvm_arm_vcpu_init(cs); -- 2.0.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine 2016-04-26 11:40 [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt Shannon Zhao 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 1/3] target-arm: kvm64: set guest PMUv3 feature bit if supported Shannon Zhao @ 2016-04-26 11:40 ` Shannon Zhao 2016-04-26 12:06 ` Andrew Jones 2016-06-06 15:59 ` Peter Maydell 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 3/3] hw/arm/virt-acpi-build: Add PMU IRQ number in ACPI table Shannon Zhao 2016-05-24 16:14 ` [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt Peter Maydell 3 siblings, 2 replies; 8+ messages in thread From: Shannon Zhao @ 2016-04-26 11:40 UTC (permalink / raw) To: qemu-arm, peter.maydell Cc: qemu-devel, drjones, peter.huangpeng, shannon.zhao From: Shannon Zhao <shannon.zhao@linaro.org> Add a virtual PMU device for virt machine while use PPI 7 for PMU overflow interrupt number. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> --- hw/arm/virt.c | 33 +++++++++++++++++++++++++++++++++ include/hw/arm/virt.h | 4 ++++ include/sysemu/kvm.h | 1 + stubs/kvm.c | 5 +++++ target-arm/kvm64.c | 41 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 84 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 56d35c7..376cb87 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -428,6 +428,37 @@ static void fdt_add_gic_node(VirtBoardInfo *vbi, int type) qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", vbi->gic_phandle); } +static void fdt_add_pmu_nodes(const VirtBoardInfo *vbi, int gictype) +{ + CPUState *cpu; + ARMCPU *armcpu; + uint32_t irqflags = GIC_FDT_IRQ_FLAGS_LEVEL_HI; + + CPU_FOREACH(cpu) { + armcpu = ARM_CPU(cpu); + if (!armcpu->has_pmu || + !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ))) { + return; + } + } + + if (gictype == 2) { + irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, + GIC_FDT_IRQ_PPI_CPU_WIDTH, + (1 << vbi->smp_cpus) - 1); + } + + armcpu = ARM_CPU(qemu_get_cpu(0)); + qemu_fdt_add_subnode(vbi->fdt, "/pmu"); + if (arm_feature(&armcpu->env, ARM_FEATURE_V8)) { + const char compat[] = "arm,armv8-pmuv3"; + qemu_fdt_setprop(vbi->fdt, "/pmu", "compatible", + compat, sizeof(compat)); + qemu_fdt_setprop_cells(vbi->fdt, "/pmu", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, VIRTUAL_PMU_IRQ, irqflags); + } +} + static void create_v2m(VirtBoardInfo *vbi, qemu_irq *pic) { int i; @@ -1246,6 +1277,8 @@ static void machvirt_init(MachineState *machine) create_gic(vbi, pic, gic_version, vms->secure); + fdt_add_pmu_nodes(vbi, gic_version); + create_uart(vbi, pic, VIRT_UART, sysmem); if (vms->secure) { diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index ecd8589..b50f095 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -40,6 +40,10 @@ #define ARCH_TIMER_NS_EL1_IRQ 14 #define ARCH_TIMER_NS_EL2_IRQ 10 +#define VIRTUAL_PMU_IRQ 7 + +#define PPI(irq) ((irq) + 16) + enum { VIRT_FLASH, VIRT_MEM, diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h index 0e18f15..4522043 100644 --- a/include/sysemu/kvm.h +++ b/include/sysemu/kvm.h @@ -523,4 +523,5 @@ int kvm_set_one_reg(CPUState *cs, uint64_t id, void *source); * Returns: 0 on success, or a negative errno on failure. */ int kvm_get_one_reg(CPUState *cs, uint64_t id, void *target); +int kvm_arm_pmu_create(CPUState *cs, int irq); #endif diff --git a/stubs/kvm.c b/stubs/kvm.c index ddd6204..667e269 100644 --- a/stubs/kvm.c +++ b/stubs/kvm.c @@ -6,3 +6,8 @@ int kvm_arch_irqchip_create(MachineState *ms, KVMState *s) { return 0; } + +int kvm_arm_pmu_create(CPUState *cs, int irq) +{ + return 0; +} diff --git a/target-arm/kvm64.c b/target-arm/kvm64.c index b364789..893f983 100644 --- a/target-arm/kvm64.c +++ b/target-arm/kvm64.c @@ -382,6 +382,47 @@ static CPUWatchpoint *find_hw_watchpoint(CPUState *cpu, target_ulong addr) return NULL; } +static bool kvm_arm_pmu_support_ctrl(CPUState *cs, struct kvm_device_attr *attr) +{ + return kvm_vcpu_ioctl(cs, KVM_HAS_DEVICE_ATTR, attr) == 0; +} + +int kvm_arm_pmu_create(CPUState *cs, int irq) +{ + int err; + + struct kvm_device_attr attr = { + .group = KVM_ARM_VCPU_PMU_V3_CTRL, + .addr = (intptr_t)&irq, + .attr = KVM_ARM_VCPU_PMU_V3_IRQ, + .flags = 0, + }; + + if (!kvm_arm_pmu_support_ctrl(cs, &attr)) { + return 0; + } + + err = kvm_vcpu_ioctl(cs, KVM_SET_DEVICE_ATTR, &attr); + if (err < 0) { + fprintf(stderr, "KVM_SET_DEVICE_ATTR failed: %s\n", + strerror(-err)); + abort(); + } + + attr.group = KVM_ARM_VCPU_PMU_V3_CTRL; + attr.attr = KVM_ARM_VCPU_PMU_V3_INIT; + attr.addr = 0; + attr.flags = 0; + + err = kvm_vcpu_ioctl(cs, KVM_SET_DEVICE_ATTR, &attr); + if (err < 0) { + fprintf(stderr, "KVM_SET_DEVICE_ATTR failed: %s\n", + strerror(-err)); + abort(); + } + + return 1; +} static inline void set_feature(uint64_t *features, int feature) { -- 2.0.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine Shannon Zhao @ 2016-04-26 12:06 ` Andrew Jones 2016-06-06 15:59 ` Peter Maydell 1 sibling, 0 replies; 8+ messages in thread From: Andrew Jones @ 2016-04-26 12:06 UTC (permalink / raw) To: Shannon Zhao Cc: qemu-arm, peter.maydell, shannon.zhao, qemu-devel, peter.huangpeng On Tue, Apr 26, 2016 at 07:40:45PM +0800, Shannon Zhao wrote: > From: Shannon Zhao <shannon.zhao@linaro.org> > > Add a virtual PMU device for virt machine while use PPI 7 for PMU > overflow interrupt number. > > Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> > --- > hw/arm/virt.c | 33 +++++++++++++++++++++++++++++++++ > include/hw/arm/virt.h | 4 ++++ > include/sysemu/kvm.h | 1 + > stubs/kvm.c | 5 +++++ > target-arm/kvm64.c | 41 +++++++++++++++++++++++++++++++++++++++++ > 5 files changed, 84 insertions(+) Reviewed-by: Andrew Jones <drjones@redhat.com> > > diff --git a/hw/arm/virt.c b/hw/arm/virt.c > index 56d35c7..376cb87 100644 > --- a/hw/arm/virt.c > +++ b/hw/arm/virt.c > @@ -428,6 +428,37 @@ static void fdt_add_gic_node(VirtBoardInfo *vbi, int type) > qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", vbi->gic_phandle); > } > > +static void fdt_add_pmu_nodes(const VirtBoardInfo *vbi, int gictype) > +{ > + CPUState *cpu; > + ARMCPU *armcpu; > + uint32_t irqflags = GIC_FDT_IRQ_FLAGS_LEVEL_HI; > + > + CPU_FOREACH(cpu) { > + armcpu = ARM_CPU(cpu); > + if (!armcpu->has_pmu || > + !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ))) { > + return; > + } > + } > + > + if (gictype == 2) { > + irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, > + GIC_FDT_IRQ_PPI_CPU_WIDTH, > + (1 << vbi->smp_cpus) - 1); > + } > + > + armcpu = ARM_CPU(qemu_get_cpu(0)); > + qemu_fdt_add_subnode(vbi->fdt, "/pmu"); > + if (arm_feature(&armcpu->env, ARM_FEATURE_V8)) { > + const char compat[] = "arm,armv8-pmuv3"; > + qemu_fdt_setprop(vbi->fdt, "/pmu", "compatible", > + compat, sizeof(compat)); > + qemu_fdt_setprop_cells(vbi->fdt, "/pmu", "interrupts", > + GIC_FDT_IRQ_TYPE_PPI, VIRTUAL_PMU_IRQ, irqflags); > + } > +} > + > static void create_v2m(VirtBoardInfo *vbi, qemu_irq *pic) > { > int i; > @@ -1246,6 +1277,8 @@ static void machvirt_init(MachineState *machine) > > create_gic(vbi, pic, gic_version, vms->secure); > > + fdt_add_pmu_nodes(vbi, gic_version); > + > create_uart(vbi, pic, VIRT_UART, sysmem); > > if (vms->secure) { > diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h > index ecd8589..b50f095 100644 > --- a/include/hw/arm/virt.h > +++ b/include/hw/arm/virt.h > @@ -40,6 +40,10 @@ > #define ARCH_TIMER_NS_EL1_IRQ 14 > #define ARCH_TIMER_NS_EL2_IRQ 10 > > +#define VIRTUAL_PMU_IRQ 7 > + > +#define PPI(irq) ((irq) + 16) > + > enum { > VIRT_FLASH, > VIRT_MEM, > diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h > index 0e18f15..4522043 100644 > --- a/include/sysemu/kvm.h > +++ b/include/sysemu/kvm.h > @@ -523,4 +523,5 @@ int kvm_set_one_reg(CPUState *cs, uint64_t id, void *source); > * Returns: 0 on success, or a negative errno on failure. > */ > int kvm_get_one_reg(CPUState *cs, uint64_t id, void *target); > +int kvm_arm_pmu_create(CPUState *cs, int irq); > #endif > diff --git a/stubs/kvm.c b/stubs/kvm.c > index ddd6204..667e269 100644 > --- a/stubs/kvm.c > +++ b/stubs/kvm.c > @@ -6,3 +6,8 @@ int kvm_arch_irqchip_create(MachineState *ms, KVMState *s) > { > return 0; > } > + > +int kvm_arm_pmu_create(CPUState *cs, int irq) > +{ > + return 0; > +} > diff --git a/target-arm/kvm64.c b/target-arm/kvm64.c > index b364789..893f983 100644 > --- a/target-arm/kvm64.c > +++ b/target-arm/kvm64.c > @@ -382,6 +382,47 @@ static CPUWatchpoint *find_hw_watchpoint(CPUState *cpu, target_ulong addr) > return NULL; > } > > +static bool kvm_arm_pmu_support_ctrl(CPUState *cs, struct kvm_device_attr *attr) > +{ > + return kvm_vcpu_ioctl(cs, KVM_HAS_DEVICE_ATTR, attr) == 0; > +} > + > +int kvm_arm_pmu_create(CPUState *cs, int irq) > +{ > + int err; > + > + struct kvm_device_attr attr = { > + .group = KVM_ARM_VCPU_PMU_V3_CTRL, > + .addr = (intptr_t)&irq, > + .attr = KVM_ARM_VCPU_PMU_V3_IRQ, > + .flags = 0, > + }; > + > + if (!kvm_arm_pmu_support_ctrl(cs, &attr)) { > + return 0; > + } > + > + err = kvm_vcpu_ioctl(cs, KVM_SET_DEVICE_ATTR, &attr); > + if (err < 0) { > + fprintf(stderr, "KVM_SET_DEVICE_ATTR failed: %s\n", > + strerror(-err)); > + abort(); > + } > + > + attr.group = KVM_ARM_VCPU_PMU_V3_CTRL; > + attr.attr = KVM_ARM_VCPU_PMU_V3_INIT; > + attr.addr = 0; > + attr.flags = 0; > + > + err = kvm_vcpu_ioctl(cs, KVM_SET_DEVICE_ATTR, &attr); > + if (err < 0) { > + fprintf(stderr, "KVM_SET_DEVICE_ATTR failed: %s\n", > + strerror(-err)); > + abort(); > + } > + > + return 1; > +} > > static inline void set_feature(uint64_t *features, int feature) > { > -- > 2.0.4 > > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine Shannon Zhao 2016-04-26 12:06 ` Andrew Jones @ 2016-06-06 15:59 ` Peter Maydell 2016-06-07 2:32 ` Shannon Zhao 1 sibling, 1 reply; 8+ messages in thread From: Peter Maydell @ 2016-06-06 15:59 UTC (permalink / raw) To: Shannon Zhao Cc: qemu-arm, QEMU Developers, Andrew Jones, Huangpeng (Peter), Shannon Zhao On 26 April 2016 at 12:40, Shannon Zhao <zhaoshenglong@huawei.com> wrote: > From: Shannon Zhao <shannon.zhao@linaro.org> > > Add a virtual PMU device for virt machine while use PPI 7 for PMU > overflow interrupt number. > > Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> > diff --git a/stubs/kvm.c b/stubs/kvm.c > index ddd6204..667e269 100644 > --- a/stubs/kvm.c > +++ b/stubs/kvm.c > @@ -6,3 +6,8 @@ int kvm_arch_irqchip_create(MachineState *ms, KVMState *s) > { > return 0; > } > + > +int kvm_arm_pmu_create(CPUState *cs, int irq) > +{ > + return 0; > +} Hi. I'm afraid this breaks compilation on 32-bit ARM hosts: for 32-bit ARM we don't have a real kvm_arm_pmu_create() so we end up pulling in the stubs/kvm.o object file from the stub library. Unfortunately that then means we have two versions of kvm_arch_irqchip_create() and the linker refuses to link. You need to split this stub function into its own .c file -- you can only share a .c file with another stub function if it's always the case that a build either needs all the stubs or none of them. I've dropped the PMU series from target-arm.next. thanks -- PMM ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine 2016-06-06 15:59 ` Peter Maydell @ 2016-06-07 2:32 ` Shannon Zhao 0 siblings, 0 replies; 8+ messages in thread From: Shannon Zhao @ 2016-06-07 2:32 UTC (permalink / raw) To: Peter Maydell Cc: qemu-arm, QEMU Developers, Andrew Jones, Huangpeng (Peter), Shannon Zhao On 2016/6/6 23:59, Peter Maydell wrote: > On 26 April 2016 at 12:40, Shannon Zhao <zhaoshenglong@huawei.com> wrote: >> > From: Shannon Zhao <shannon.zhao@linaro.org> >> > >> > Add a virtual PMU device for virt machine while use PPI 7 for PMU >> > overflow interrupt number. >> > >> > Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> >> > diff --git a/stubs/kvm.c b/stubs/kvm.c >> > index ddd6204..667e269 100644 >> > --- a/stubs/kvm.c >> > +++ b/stubs/kvm.c >> > @@ -6,3 +6,8 @@ int kvm_arch_irqchip_create(MachineState *ms, KVMState *s) >> > { >> > return 0; >> > } >> > + >> > +int kvm_arm_pmu_create(CPUState *cs, int irq) >> > +{ >> > + return 0; >> > +} > Hi. I'm afraid this breaks compilation on 32-bit ARM hosts: > for 32-bit ARM we don't have a real kvm_arm_pmu_create() so we > end up pulling in the stubs/kvm.o object file from the stub > library. Unfortunately that then means we have two versions of > kvm_arch_irqchip_create() and the linker refuses to link. > Oops, I'll fix this and resend. -- Shannon ^ permalink raw reply [flat|nested] 8+ messages in thread
* [Qemu-devel] [PATCH v4 3/3] hw/arm/virt-acpi-build: Add PMU IRQ number in ACPI table 2016-04-26 11:40 [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt Shannon Zhao 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 1/3] target-arm: kvm64: set guest PMUv3 feature bit if supported Shannon Zhao 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine Shannon Zhao @ 2016-04-26 11:40 ` Shannon Zhao 2016-05-24 16:14 ` [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt Peter Maydell 3 siblings, 0 replies; 8+ messages in thread From: Shannon Zhao @ 2016-04-26 11:40 UTC (permalink / raw) To: qemu-arm, peter.maydell Cc: qemu-devel, drjones, peter.huangpeng, shannon.zhao From: Shannon Zhao <shannon.zhao@linaro.org> Add PMU IRQ number in ACPI table, then we can use PMU in guest through ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> --- hw/arm/virt-acpi-build.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index f51fe39..5031232 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -491,6 +491,9 @@ build_madt(GArray *table_data, GArray *linker, VirtGuestInfo *guest_info) gicc->arm_mpidr = armcpu->mp_affinity; gicc->uid = i; gicc->flags = cpu_to_le32(ACPI_GICC_ENABLED); + + if (armcpu->has_pmu) + gicc->performance_interrupt = cpu_to_le32(PPI(VIRTUAL_PMU_IRQ)); } if (guest_info->gic_version == 3) { -- 2.0.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt 2016-04-26 11:40 [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt Shannon Zhao ` (2 preceding siblings ...) 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 3/3] hw/arm/virt-acpi-build: Add PMU IRQ number in ACPI table Shannon Zhao @ 2016-05-24 16:14 ` Peter Maydell 3 siblings, 0 replies; 8+ messages in thread From: Peter Maydell @ 2016-05-24 16:14 UTC (permalink / raw) To: Shannon Zhao Cc: qemu-arm, QEMU Developers, Andrew Jones, Huangpeng (Peter), Shannon Zhao On 26 April 2016 at 12:40, Shannon Zhao <zhaoshenglong@huawei.com> wrote: > From: Shannon Zhao <shannon.zhao@linaro.org> > > KVM-ARM64 supports guest PMU now. This series add the support in machine > virt so that guest could use PMU. > > The ACPI part is tested with below guest kernel patches. > https://lkml.org/lkml/2016/4/12/755 Applied to target-arm.next, thanks (I fixed some missing braces in patch 3 and fixed up patch 1 to apply on current master which has moved the ARMCPU struct definition). thanks -- PMM ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-06-07 2:36 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-04-26 11:40 [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt Shannon Zhao 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 1/3] target-arm: kvm64: set guest PMUv3 feature bit if supported Shannon Zhao 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 2/3] hw/arm/virt: Add PMU node for virt machine Shannon Zhao 2016-04-26 12:06 ` Andrew Jones 2016-06-06 15:59 ` Peter Maydell 2016-06-07 2:32 ` Shannon Zhao 2016-04-26 11:40 ` [Qemu-devel] [PATCH v4 3/3] hw/arm/virt-acpi-build: Add PMU IRQ number in ACPI table Shannon Zhao 2016-05-24 16:14 ` [Qemu-devel] [PATCH v4 0/3] Add guest PMU in machine virt Peter Maydell
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.