* driver crashes if I try to het 2560 x 1440 @ 50Hz CVT-RB running under Linux... Ideas?
@ 2016-04-26 17:07 Andreas Balg
2016-04-26 17:18 ` Parenteau, Paul A
0 siblings, 1 reply; 4+ messages in thread
From: Andreas Balg @ 2016-04-26 17:07 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 10638 bytes --]
Hi everybody,
I'm trying to setup a 27" screen on Fedora 23 (intel driver installer
1.4.0 Q4 2015) attached to an HDMI (ultrabook ASUS UX31A). I know it
needs "reduced blank" and a timing of max 50Hz in order to work - with
the max Bandwith on HDMI (at least that way it works on Windows using
the same setup and "CustomResolution.exe") - But it dies not work so let
me describe what I did so far:
1st guess)
"cvt -r 2560 1440 50" >> ERROR: Multiple of 60Hz refresh rate required
for reduced blanking.
2nd guess)
Also The same seems to be true for "gtf"
"gtf 2560 1440 50" # 2560x1440 @ 50.00 Hz (GTF) hsync: 74.10 kHz; pclk:
256.09 MHz Modeline "2560x1440_50.00" 256.09 2560 2728 3008 3456 1440
1441 1444 1482 -HSync +Vsync
>>>> Does not work
3rd guess)
A Modeline that I've found on the internet :
xrandr --newmode "2560x1440_50.00_rb" 200.25 2560 2608 2640 2720 1440
1443 1448 1474 +HSync -Vsync xrandr --addmode HDMI1 "2560x1440_50.00_rb"
xrandr --output HDMI1 --mode "2560x1440_50.00_rb"
>>>> Does not work either => Results in:
Apr 23 15:30:39 schleppi-ultra.balg.lan
/usr/libexec/gdm-x-session[2986]: (II) intel(0): resizing framebuffer to
5504x1440 Apr 23 15:30:39 schleppi-ultra.balg.lan
/usr/libexec/gdm-x-session[2986]: (II) intel(0): switch to mode
2560x1440@49.9 on HDMI1 using pipe 0, position (0, 0), rotation normal,
reflection n Apr 23 15:30:51 schleppi-ultra.balg.lan
/usr/libexec/gdm-x-session[2986]: (II) intel(0): resizing framebuffer to
5504x1180 Apr 23 15:30:51 schleppi-ultra.balg.lan
/usr/libexec/gdm-x-session[2986]: (II) intel(0): switch to mode
2048x1152@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal,
reflection n Apr 23 15:30:51 schleppi-ultra.balg.lan kernel:
[drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared
fifo underrun on pipe B Apr 23 15:30:52 schleppi-ultra.balg.lan kernel:
[drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO
underrun
Last try)
Read the modeline from "PowerStrip" from a running windows on the same
machine that actually runs the wanted resolution:
xrandr --newmode "2560x1440" 200.002 2560 2608 2640 2720 1440 1443 1448
1474 -hsync -vsync
But this only switches to a black screen and causes the "pipe_off wait
timed out" message in dmesg below...
I've found the following two graphics related problems in the logs
(dmesg) which might help as well:
[ 2.625304] ------------[ cut here ]------------ [ 2.625335] WARNING:
CPU: 0 PID: 6 at drivers/gpu/drm/drm_irq.c:1326
drm_wait_one_vblank+0x1b5/0x1c0 [drm]() [ 2.625335] vblank wait timed
out on crtc 0 [ 2.625362] Modules linked in: i915 rtsx_usb_sdmmc
mmc_core rtsx_usb hid_logitech_hidpp i2c_algo_bit drm_kms_helper drm
serio_raw video fjes hid_logitech_dj [ 2.625368] CPU: 0 PID: 6 Comm:
kworker/u8:0 Tainted: G U 4.4.7-300.fc23.x86_64 #1 [ 2.625370] Hardware
name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.219 06/14/2013 [
2.625380] Workqueue: events_unbound async_run_entry_fn [ 2.625385]
0000000000000286 00000000d003577f ffff88011a03f818 ffffffff813b5f8e [
2.625389] ffff88011a03f860 ffffffffa007e772 ffff88011a03f850
ffffffff810a4122 [ 2.625392] ffff88003e677000 0000000000000000
0000000000000000 0000000000000006 [ 2.625394] Call Trace: [ 2.625405]
[<ffffffff813b5f8e>] dump_stack+0x63/0x85 [ 2.625413]
[<ffffffff810a4122>] warn_slowpath_common+0x82/0xc0 [ 2.625418]
[<ffffffff810a41bc>] warn_slowpath_fmt+0x5c/0x80 [ 2.625426]
[<ffffffff810e6023>] ? finish_wait+0x53/0x70 [ 2.625450]
[<ffffffffa0052c15>] drm_wait_one_vblank+0x1b5/0x1c0 [drm] [ 2.625456]
[<ffffffff810e62e0>] ? wake_atomic_t_function+0x70/0x70 [ 2.625552]
[<ffffffffa01736d5>] intel_atomic_commit+0x475/0x1420 [i915] [ 2.625588]
[<ffffffffa006b1be>] ? drm_atomic_check_only+0x18e/0x590 [drm] [
2.625618] [<ffffffffa006b5f7>] drm_atomic_commit+0x37/0x60 [drm] [
2.625634] [<ffffffffa00c409f>] restore_fbdev_mode+0x22f/0x260
[drm_kms_helper] [ 2.625649] [<ffffffffa00c6273>]
drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [
2.625660] [<ffffffffa00c62ed>] drm_fb_helper_set_par+0x2d/0x50
[drm_kms_helper] [ 2.625744] [<ffffffffa018a3ba>]
intel_fbdev_set_par+0x1a/0x60 [i915] [ 2.625750] [<ffffffff81428050>]
fbcon_init+0x570/0x5f0 [ 2.625755] [<ffffffff814a9aea>]
visual_init+0xca/0x130 [ 2.625759] [<ffffffff814ab981>]
do_bind_con_driver+0x1c1/0x3a0 [ 2.625764] [<ffffffff814abe99>]
do_take_over_console+0x149/0x1a0 [ 2.625769] [<ffffffff81423eb7>]
do_fbcon_takeover+0x57/0xb0 [ 2.625773] [<ffffffff81428ac8>]
fbcon_event_notify+0x658/0x750 [ 2.625778] [<ffffffff810c355a>]
notifier_call_chain+0x4a/0x70 [ 2.625783] [<ffffffff810c3897>]
__blocking_notifier_call_chain+0x47/0x60 [ 2.625787]
[<ffffffff810c38c6>] blocking_notifier_call_chain+0x16/0x20 [ 2.625792]
[<ffffffff8142e71b>] fb_notifier_call_chain+0x1b/0x20 [ 2.625798]
[<ffffffff81430a3f>] register_framebuffer+0x20f/0x350 [ 2.625812]
[<ffffffffa00c659a>] drm_fb_helper_initial_config+0x28a/0x410
[drm_kms_helper] [ 2.625889] [<ffffffffa018aebb>]
intel_fbdev_initial_config+0x1b/0x20 [i915] [ 2.625894]
[<ffffffff810c4fca>] async_run_entry_fn+0x4a/0x140 [ 2.625900]
[<ffffffff810bc5c6>] process_one_work+0x156/0x430 [ 2.625904]
[<ffffffff810bc8ee>] worker_thread+0x4e/0x450 [ 2.625909]
[<ffffffff810bc8a0>] ? process_one_work+0x430/0x430 [ 2.625912]
[<ffffffff810c2678>] kthread+0xd8/0xf0 [ 2.625916] [<ffffffff810c25a0>]
? kthread_worker_fn+0x160/0x160 [ 2.625921] [<ffffffff817a144f>]
ret_from_fork+0x3f/0x70 [ 2.625925] [<ffffffff810c25a0>] ?
kthread_worker_fn+0x160/0x160 [ 2.625928] ---[ end trace
cec8cc6321f01362 ]---
2) And this one as well:
[ 13.375747] ------------[ cut here ]------------ [ 13.375827] WARNING:
CPU: 3 PID: 1894 at drivers/gpu/drm/i915/intel_display.c:1144
intel_disable_pipe+0x2b6/0x2c0 [i915]() [ 13.375831] pipe_off wait timed
out [ 13.375834] Modules linked in: cmac fuse xt_CHECKSUM iptable_mangle
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat
nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge
stp llc ebtable_filter ebtables ip6table_filter ip6_tables evdi(OE) uhid
bnep rtsx_usb_ms memstick arc4 intel_rapl iosf_mbi x86_pkg_temp_thermal
coretemp kvm_intel btusb iTCO_wdt asus_nb_wmi kvm iTCO_vendor_support
asus_wmi sparse_keymap btrtl btbcm btintel bluetooth uvcvideo
videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core
irqbypass v4l2_common crct10dif_pclmul iwlmvm crc32_pclmul vfat fat
snd_hda_codec_hdmi videodev mac80211 crc32c_intel snd_hda_codec_realtek
snd_hda_codec_generic media snd_hda_intel iwlwifi snd_hda_codec cfg80211
snd_hda_core snd_hwdep snd_seq joydev snd_seq_device [ 13.375920]
snd_pcm i2c_i801 lpc_ich rfkill wmi int3403_thermal acpi_als mei_me
kfifo_buf industrialio snd_timer int3402_thermal mei int3400_thermal
int340x_thermal_zone acpi_thermal_rel snd tpm_tis shpchp soundcore tpm
nfsd binfmt_misc nfs_acl lockd auth_rpcgss grace sunrpc i915
rtsx_usb_sdmmc mmc_core rtsx_usb hid_logitech_hidpp i2c_algo_bit
drm_kms_helper drm serio_raw video fjes hid_logitech_dj [ 13.375971]
CPU: 3 PID: 1894 Comm: gnome-shell Tainted: G U W OE
4.4.7-300.fc23.x86_64 #1 [ 13.375975] Hardware name: ASUSTeK COMPUTER
INC. UX31A/UX31A, BIOS UX31A.219 06/14/2013 [ 13.375979]
0000000000200286 00000000827c27d7 ffff880115447a78 ffffffff813b5f8e [
13.375985] ffff880115447ac0 ffffffffa01d6de8 ffff880115447ab0
ffffffff810a4122 [ 13.375991] ffff88003d940000 0000000000070008
00000000fffb9ff6 0000000000070008 [ 13.375996] Call Trace: [ 13.376011]
[<ffffffff813b5f8e>] dump_stack+0x63/0x85 [ 13.376021]
[<ffffffff810a4122>] warn_slowpath_common+0x82/0xc0 [ 13.376027]
[<ffffffff810a41bc>] warn_slowpath_fmt+0x5c/0x80 [ 13.376086]
[<ffffffffa016a446>] intel_disable_pipe+0x2b6/0x2c0 [i915] [ 13.376137]
[<ffffffffa016a7fc>] ironlake_crtc_disable+0x8c/0x7c0 [i915] [
13.376182] [<ffffffffa0166adc>] ? intel_crtc_disable_planes+0xdc/0xf0
[i915] [ 13.376231] [<ffffffffa0173387>]
intel_atomic_commit+0x127/0x1420 [i915] [ 13.376283]
[<ffffffffa006b1be>] ? drm_atomic_check_only+0x18e/0x590 [drm] [
13.376320] [<ffffffffa006acbd>] ?
drm_atomic_set_mode_prop_for_crtc+0x2d/0x110 [drm] [ 13.376350]
[<ffffffffa006b5f7>] drm_atomic_commit+0x37/0x60 [drm] [ 13.376373]
[<ffffffffa00c34c6>] drm_atomic_helper_set_config+0x76/0xb0
[drm_kms_helper] [ 13.376405] [<ffffffffa005ab62>]
drm_mode_set_config_internal+0x62/0x100 [drm] [ 13.376434]
[<ffffffffa005eee2>] drm_mode_setcrtc+0x3d2/0x4f0 [drm] [ 13.376457]
[<ffffffffa0050602>] drm_ioctl+0x152/0x540 [drm] [ 13.376485]
[<ffffffffa005eb10>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [ 13.376494]
[<ffffffff813407fc>] ? selinux_file_ioctl+0x10c/0x1c0 [ 13.376503]
[<ffffffff81241428>] do_vfs_ioctl+0x298/0x480 [ 13.376510]
[<ffffffff8122ff5e>] ? ____fput+0xe/0x10 [ 13.376518]
[<ffffffff813380b3>] ? security_file_ioctl+0x43/0x60 [ 13.376524]
[<ffffffff81241689>] SyS_ioctl+0x79/0x90 [ 13.376533]
[<ffffffff817a10ee>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 13.376592]
---[ end trace cec8cc6321f01363 ]---
I've tried this using Wayland and Classic X as well ...
Any hints on how to get this thing up and running with this stuff -
attached Display is a DELL U2715H ?? -
Any more helpful information needed ?
lspci -kvnn
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
modinfo i915 filename:
/lib/modules/4.4.7-300.fc23.x86_64/kernel/drivers/gpu/drm/i915/i915.ko.xz
license: GPL and additional rights description: Intel Graphics author:
Intel Corporation author: Tungsten Graphics, Inc. firmware:
i915/bxt_dmc_ver1.bin firmware: i915/skl_dmc_ver1.bin firmware:
i915/skl_guc_ver4.bin Hoping to see any more hints that I did not think
about so far ...
Cheers..
Andreas
[-- Attachment #1.2: Type: text/html, Size: 12239 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: driver crashes if I try to het 2560 x 1440 @ 50Hz CVT-RB running under Linux... Ideas?
2016-04-26 17:07 driver crashes if I try to het 2560 x 1440 @ 50Hz CVT-RB running under Linux... Ideas? Andreas Balg
@ 2016-04-26 17:18 ` Parenteau, Paul A
2016-04-26 20:05 ` Andreas Balg
0 siblings, 1 reply; 4+ messages in thread
From: Parenteau, Paul A @ 2016-04-26 17:18 UTC (permalink / raw)
To: Andreas Balg, intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 11445 bytes --]
Have you tried this setup using Fedora 23 without the 1.4.0 Installer? If not, please do and report back.
From: Intel-gfx [mailto:intel-gfx-bounces@lists.freedesktop.org] On Behalf Of Andreas Balg
Sent: Tuesday, April 26, 2016 10:08 AM
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] driver crashes if I try to het 2560 x 1440 @ 50Hz CVT-RB running under Linux... Ideas?
Hi everybody,
I'm trying to setup a 27" screen on Fedora 23 (intel driver installer 1.4.0 Q4 2015) attached to an HDMI (ultrabook ASUS UX31A). I know it needs "reduced blank" and a timing of max 50Hz in order to work - with the max Bandwith on HDMI (at least that way it works on Windows using the same setup and "CustomResolution.exe") - But it dies not work so let me describe what I did so far:
1st guess)
"cvt -r 2560 1440 50"
>> ERROR: Multiple of 60Hz refresh rate required for reduced blanking.
2nd guess)
Also The same seems to be true for "gtf"
"gtf 2560 1440 50"
# 2560x1440 @ 50.00 Hz (GTF) hsync: 74.10 kHz; pclk: 256.09 MHz
Modeline "2560x1440_50.00" 256.09 2560 2728 3008 3456 1440 1441 1444 1482 -HSync +Vsync
>>>> Does not work
3rd guess)
A Modeline that I've found on the internet :
xrandr --newmode "2560x1440_50.00_rb" 200.25 2560 2608 2640 2720 1440 1443 1448 1474 +HSync -Vsync
xrandr --addmode HDMI1 "2560x1440_50.00_rb"
xrandr --output HDMI1 --mode "2560x1440_50.00_rb"
>>>> Does not work either => Results in:
Apr 23 15:30:39 schleppi-ultra.balg.lan /usr/libexec/gdm-x-session[2986]: (II) intel(0): resizing framebuffer to 5504x1440
Apr 23 15:30:39 schleppi-ultra.balg.lan /usr/libexec/gdm-x-session[2986]: (II) intel(0): switch to mode 2560x1440@49.9<mailto:2560x1440@49.9> on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection n
Apr 23 15:30:51 schleppi-ultra.balg.lan /usr/libexec/gdm-x-session[2986]: (II) intel(0): resizing framebuffer to 5504x1180
Apr 23 15:30:51 schleppi-ultra.balg.lan /usr/libexec/gdm-x-session[2986]: (II) intel(0): switch to mode 2048x1152@60.0<mailto:2048x1152@60.0> on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection n
Apr 23 15:30:51 schleppi-ultra.balg.lan kernel: [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe B
Apr 23 15:30:52 schleppi-ultra.balg.lan kernel: [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
Last try)
Read the modeline from "PowerStrip" from a running windows on the same machine that actually runs the wanted resolution:
xrandr --newmode "2560x1440" 200.002 2560 2608 2640 2720 1440 1443 1448 1474 -hsync -vsync
But this only switches to a black screen and causes the "pipe_off wait timed out" message in dmesg below...
I've found the following two graphics related problems in the logs (dmesg) which might help as well:
[ 2.625304] ------------[ cut here ]------------
[ 2.625335] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x1b5/0x1c0 [drm]()
[ 2.625335] vblank wait timed out on crtc 0
[ 2.625362] Modules linked in: i915 rtsx_usb_sdmmc mmc_core rtsx_usb hid_logitech_hidpp i2c_algo_bit drm_kms_helper drm serio_raw video fjes hid_logitech_dj
[ 2.625368] CPU: 0 PID: 6 Comm: kworker/u8:0 Tainted: G U 4.4.7-300.fc23.x86_64 #1
[ 2.625370] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.219 06/14/2013
[ 2.625380] Workqueue: events_unbound async_run_entry_fn
[ 2.625385] 0000000000000286 00000000d003577f ffff88011a03f818 ffffffff813b5f8e
[ 2.625389] ffff88011a03f860 ffffffffa007e772 ffff88011a03f850 ffffffff810a4122
[ 2.625392] ffff88003e677000 0000000000000000 0000000000000000 0000000000000006
[ 2.625394] Call Trace:
[ 2.625405] [<ffffffff813b5f8e>] dump_stack+0x63/0x85
[ 2.625413] [<ffffffff810a4122>] warn_slowpath_common+0x82/0xc0
[ 2.625418] [<ffffffff810a41bc>] warn_slowpath_fmt+0x5c/0x80
[ 2.625426] [<ffffffff810e6023>] ? finish_wait+0x53/0x70
[ 2.625450] [<ffffffffa0052c15>] drm_wait_one_vblank+0x1b5/0x1c0 [drm]
[ 2.625456] [<ffffffff810e62e0>] ? wake_atomic_t_function+0x70/0x70
[ 2.625552] [<ffffffffa01736d5>] intel_atomic_commit+0x475/0x1420 [i915]
[ 2.625588] [<ffffffffa006b1be>] ? drm_atomic_check_only+0x18e/0x590 [drm]
[ 2.625618] [<ffffffffa006b5f7>] drm_atomic_commit+0x37/0x60 [drm]
[ 2.625634] [<ffffffffa00c409f>] restore_fbdev_mode+0x22f/0x260 [drm_kms_helper]
[ 2.625649] [<ffffffffa00c6273>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
[ 2.625660] [<ffffffffa00c62ed>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
[ 2.625744] [<ffffffffa018a3ba>] intel_fbdev_set_par+0x1a/0x60 [i915]
[ 2.625750] [<ffffffff81428050>] fbcon_init+0x570/0x5f0
[ 2.625755] [<ffffffff814a9aea>] visual_init+0xca/0x130
[ 2.625759] [<ffffffff814ab981>] do_bind_con_driver+0x1c1/0x3a0
[ 2.625764] [<ffffffff814abe99>] do_take_over_console+0x149/0x1a0
[ 2.625769] [<ffffffff81423eb7>] do_fbcon_takeover+0x57/0xb0
[ 2.625773] [<ffffffff81428ac8>] fbcon_event_notify+0x658/0x750
[ 2.625778] [<ffffffff810c355a>] notifier_call_chain+0x4a/0x70
[ 2.625783] [<ffffffff810c3897>] __blocking_notifier_call_chain+0x47/0x60
[ 2.625787] [<ffffffff810c38c6>] blocking_notifier_call_chain+0x16/0x20
[ 2.625792] [<ffffffff8142e71b>] fb_notifier_call_chain+0x1b/0x20
[ 2.625798] [<ffffffff81430a3f>] register_framebuffer+0x20f/0x350
[ 2.625812] [<ffffffffa00c659a>] drm_fb_helper_initial_config+0x28a/0x410 [drm_kms_helper]
[ 2.625889] [<ffffffffa018aebb>] intel_fbdev_initial_config+0x1b/0x20 [i915]
[ 2.625894] [<ffffffff810c4fca>] async_run_entry_fn+0x4a/0x140
[ 2.625900] [<ffffffff810bc5c6>] process_one_work+0x156/0x430
[ 2.625904] [<ffffffff810bc8ee>] worker_thread+0x4e/0x450
[ 2.625909] [<ffffffff810bc8a0>] ? process_one_work+0x430/0x430
[ 2.625912] [<ffffffff810c2678>] kthread+0xd8/0xf0
[ 2.625916] [<ffffffff810c25a0>] ? kthread_worker_fn+0x160/0x160
[ 2.625921] [<ffffffff817a144f>] ret_from_fork+0x3f/0x70
[ 2.625925] [<ffffffff810c25a0>] ? kthread_worker_fn+0x160/0x160
[ 2.625928] ---[ end trace cec8cc6321f01362 ]---
2) And this one as well:
[ 13.375747] ------------[ cut here ]------------
[ 13.375827] WARNING: CPU: 3 PID: 1894 at drivers/gpu/drm/i915/intel_display.c:1144 intel_disable_pipe+0x2b6/0x2c0 [i915]()
[ 13.375831] pipe_off wait timed out
[ 13.375834] Modules linked in: cmac fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables evdi(OE) uhid bnep rtsx_usb_ms memstick arc4 intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp kvm_intel btusb iTCO_wdt asus_nb_wmi kvm iTCO_vendor_support asus_wmi sparse_keymap btrtl btbcm btintel bluetooth uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core irqbypass v4l2_common crct10dif_pclmul iwlmvm crc32_pclmul vfat fat snd_hda_codec_hdmi videodev mac80211 crc32c_intel snd_hda_codec_realtek snd_hda_codec_generic media snd_hda_intel iwlwifi snd_hda_codec cfg80211 snd_hda_core snd_hwdep snd_seq joydev snd_seq_device
[ 13.375920] snd_pcm i2c_i801 lpc_ich rfkill wmi int3403_thermal acpi_als mei_me kfifo_buf industrialio snd_timer int3402_thermal mei int3400_thermal int340x_thermal_zone acpi_thermal_rel snd tpm_tis shpchp soundcore tpm nfsd binfmt_misc nfs_acl lockd auth_rpcgss grace sunrpc i915 rtsx_usb_sdmmc mmc_core rtsx_usb hid_logitech_hidpp i2c_algo_bit drm_kms_helper drm serio_raw video fjes hid_logitech_dj
[ 13.375971] CPU: 3 PID: 1894 Comm: gnome-shell Tainted: G U W OE 4.4.7-300.fc23.x86_64 #1
[ 13.375975] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.219 06/14/2013
[ 13.375979] 0000000000200286 00000000827c27d7 ffff880115447a78 ffffffff813b5f8e
[ 13.375985] ffff880115447ac0 ffffffffa01d6de8 ffff880115447ab0 ffffffff810a4122
[ 13.375991] ffff88003d940000 0000000000070008 00000000fffb9ff6 0000000000070008
[ 13.375996] Call Trace:
[ 13.376011] [<ffffffff813b5f8e>] dump_stack+0x63/0x85
[ 13.376021] [<ffffffff810a4122>] warn_slowpath_common+0x82/0xc0
[ 13.376027] [<ffffffff810a41bc>] warn_slowpath_fmt+0x5c/0x80
[ 13.376086] [<ffffffffa016a446>] intel_disable_pipe+0x2b6/0x2c0 [i915]
[ 13.376137] [<ffffffffa016a7fc>] ironlake_crtc_disable+0x8c/0x7c0 [i915]
[ 13.376182] [<ffffffffa0166adc>] ? intel_crtc_disable_planes+0xdc/0xf0 [i915]
[ 13.376231] [<ffffffffa0173387>] intel_atomic_commit+0x127/0x1420 [i915]
[ 13.376283] [<ffffffffa006b1be>] ? drm_atomic_check_only+0x18e/0x590 [drm]
[ 13.376320] [<ffffffffa006acbd>] ? drm_atomic_set_mode_prop_for_crtc+0x2d/0x110 [drm]
[ 13.376350] [<ffffffffa006b5f7>] drm_atomic_commit+0x37/0x60 [drm]
[ 13.376373] [<ffffffffa00c34c6>] drm_atomic_helper_set_config+0x76/0xb0 [drm_kms_helper]
[ 13.376405] [<ffffffffa005ab62>] drm_mode_set_config_internal+0x62/0x100 [drm]
[ 13.376434] [<ffffffffa005eee2>] drm_mode_setcrtc+0x3d2/0x4f0 [drm]
[ 13.376457] [<ffffffffa0050602>] drm_ioctl+0x152/0x540 [drm]
[ 13.376485] [<ffffffffa005eb10>] ? drm_mode_setplane+0x1b0/0x1b0 [drm]
[ 13.376494] [<ffffffff813407fc>] ? selinux_file_ioctl+0x10c/0x1c0
[ 13.376503] [<ffffffff81241428>] do_vfs_ioctl+0x298/0x480
[ 13.376510] [<ffffffff8122ff5e>] ? ____fput+0xe/0x10
[ 13.376518] [<ffffffff813380b3>] ? security_file_ioctl+0x43/0x60
[ 13.376524] [<ffffffff81241689>] SyS_ioctl+0x79/0x90
[ 13.376533] [<ffffffff817a10ee>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 13.376592] ---[ end trace cec8cc6321f01363 ]---
I've tried this using Wayland and Classic X as well ...
Any hints on how to get this thing up and running with this stuff - attached Display is a DELL U2715H ?? -
Any more helpful information needed ?
lspci -kvnn
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
modinfo i915
filename: /lib/modules/4.4.7-300.fc23.x86_64/kernel/drivers/gpu/drm/i915/i915.ko.xz
license: GPL and additional rights
description: Intel Graphics
author: Intel Corporation
author: Tungsten Graphics, Inc.
firmware: i915/bxt_dmc_ver1.bin
firmware: i915/skl_dmc_ver1.bin
firmware: i915/skl_guc_ver4.bin
Hoping to see any more hints that I did not think about so far ...
Cheers..
Andreas
[-- Attachment #1.2: Type: text/html, Size: 21361 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: driver crashes if I try to het 2560 x 1440 @ 50Hz CVT-RB running under Linux... Ideas?
2016-04-26 17:18 ` Parenteau, Paul A
@ 2016-04-26 20:05 ` Andreas Balg
2016-05-10 16:25 ` Marius Vlad
0 siblings, 1 reply; 4+ messages in thread
From: Andreas Balg @ 2016-04-26 20:05 UTC (permalink / raw)
To: intel-gfx
As I cannot reinstall the entire machine from scratch I tried first to
verify the issue using a Fedora 23 - Live USB Stick (which still runs
on Kernel 4.2.3) = > It practically show exactly the same
results/errors.
I've also cleaned my machine very thoroughly from any packages
installed or updated using the intel-graphics-installer and
downgraded/replaced everything using the current stable fedora packages
and even removed dkms entirely and reinstalled the kernel and kernel-
modules:
But the error remains the same:
Packages removed/replaced/downgraded:
cairo.i686 1.14.4-23.intel20154
cairo.x86_64 1.14.4-23.intel20154
cairo-gobject.x86_64 1.14.4-23.intel20154
intel-gpu-tools.x86_64 2.99.917-23.intel20154
libva-intel-driver.i686 1.6.2-23.intel20154
libva-intel-driver.x86_64 1.6.2-23.intel20154
xorg-x11-drv-intel.x86_64 2.99.917-23.intel20154
intel-linux-graphics-installer.x86_64 1.4.0-23.intel20154
Kernel from USB-Live medium was:
Linux localhost 4.2.3-300.fc23.x86_64 #1 SMP Mon Oct 5 15:42:54
UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
The error message from dmesg:
[ 22.767160] ------------[ cut here ]------------
[ 22.767232] WARNING: CPU: 1 PID: 1792 at
drivers/gpu/drm/i915/intel_display.c:1064
intel_disable_pipe+0x28d/0x2a0 [i915]()
[ 22.767236] pipe_off wait timed out
[ 22.767239] Modules linked in: rfcomm xt_CHECKSUM ipt_MASQUERADE
nf_nat_masquerade_ipv4 tun fuse nf_conntrack_netbios_ns
nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT nf_reject_ipv6
xt_conntrack ebtable_nat ebtable_filter ebtable_broute bridge ebtables
ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
ip6table_mangle ip6table_security ip6table_filter ip6_tables
iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
nf_nat nf_conntrack iptable_mangle iptable_security bnep rtsx_usb_ms
memstick arc4 uvcvideo videobuf2_vmalloc videobuf2_core
videobuf2_memops v4l2_common iwlmvm videodev mac80211 intel_rapl
snd_usb_audio snd_usbmidi_lib media iosf_mbi x86_pkg_temp_thermal
coretemp kvm_intel kvm snd_rawmidi iTCO_wdt iTCO_vendor_support
asus_nb_wmi asus_wmi sparse_keymap
[ 22.767322] btusb btrtl btbcm btintel bluetooth snd_hda_codec_hdmi
snd_hda_codec_realtek snd_hda_codec_generic iwlwifi snd_hda_intel
snd_hda_codec cfg80211 snd_hda_core snd_hwdep snd_seq snd_seq_device
snd_pcm joydev snd_timer snd acpi_als int3402_thermal rfkill mei_me
i2c_i801 int3403_thermal int340x_thermal_zone kfifo_buf industrialio
shpchp int3400_thermal acpi_thermal_rel tpm_tis tpm lpc_ich soundcore
mei nfsd auth_rpcgss nfs_acl lockd grace isofs squashfs
hid_logitech_hidpp hid_logitech_dj i915 crct10dif_pclmul crc32_pclmul
crc32c_intel 8021q garp stp llc cdc_mbim i2c_algo_bit mrp cdc_wdm
ghash_clmulni_intel drm_kms_helper serio_raw drm cdc_ncm usbnet uas mii
usb_storage wmi video rtsx_usb_sdmmc mmc_core rtsx_usb scsi_dh_rdac
scsi_dh_emc scsi_dh_alua sunrpc loop
[ 22.767426] CPU: 1 PID: 1792 Comm: Xorg Not tainted 4.2.3-
300.fc23.x86_64 #1
[ 22.767430] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS
UX31A.219 06/14/2013
[ 22.767434] 0000000000000000 000000006a212948 ffff8801191cfa38
ffffffff81771fca
[ 22.767441] 0000000000000000 ffff8801191cfa90 ffff8801191cfa78
ffffffff8109e4a6
[ 22.767447] 0000000000000700 ffff88003da10000 0000000000070008
00000000fffbc193
[ 22.767453] Call Trace:
[ 22.767464] [<ffffffff81771fca>] dump_stack+0x45/0x57
[ 22.767475] [<ffffffff8109e4a6>] warn_slowpath_common+0x86/0xc0
[ 22.767482] [<ffffffff8109e535>] warn_slowpath_fmt+0x55/0x70
[ 22.767530] [<ffffffffa022c41d>] intel_disable_pipe+0x28d/0x2a0
[i915]
[ 22.767569] [<ffffffffa022d0e3>] ironlake_crtc_disable+0x93/0x7f0
[i915]
[ 22.767611] [<ffffffffa0241a33>] ?
intel_frontbuffer_flush+0x63/0x70 [i915]
[ 22.767651] [<ffffffffa023502c>] __intel_set_mode+0x94c/0xb60
[i915]
[ 22.767689] [<ffffffffa023654f>] ?
intel_modeset_compute_config+0x3af/0xb60 [i915]
[ 22.767738] [<ffffffffa023bee6>] intel_crtc_set_config+0x2b6/0x580
[i915]
[ 22.767804] [<ffffffffa0106326>]
drm_mode_set_config_internal+0x66/0x100 [drm]
[ 22.767926] [<ffffffffa010a809>] drm_mode_setcrtc+0x3e9/0x500 [drm]
[ 22.767948] [<ffffffffa00fb365>] drm_ioctl+0x125/0x610 [drm]
[ 22.767976] [<ffffffffa010a420>] ? drm_mode_setplane+0x1b0/0x1b0
[drm]
[ 22.767992] [<ffffffff812312b5>] do_vfs_ioctl+0x295/0x470
[ 22.768000] [<ffffffff8132930d>] ? selinux_file_ioctl+0x4d/0xc0
[ 22.768006] [<ffffffff81231509>] SyS_ioctl+0x79/0x90
[ 22.768014] [<ffffffff810acf1e>] ? SyS_rt_sigprocmask+0x8e/0xc0
[ 22.768022] [<ffffffff817789ae>]
entry_SYSCALL_64_fastpath+0x12/0x71
[ 22.768029] ---[ end trace b2da396d1e42e1ca ]---
[ 23.711060] [drm:intel_set_pch_fifo_underrun_reporting [i915]]
*ERROR* uncleared pch fifo underrun on pch transcoder A
[ 23.711113] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR*
PCH transcoder A FIFO underrun
Seems basically the same to me ....
Cheers
Am Dienstag, den 26.04.2016, 17:18 +0000 schrieb Parenteau, Paul A:
> Have you tried this setup using Fedora 23 without the 1.4.0
> Installer? If not, please do and report back.
>
> From: Intel-gfx [mailto:intel-gfx-bounces@lists.freedesktop.org] On
> Behalf Of Andreas Balg
> Sent: Tuesday, April 26, 2016 10:08 AM
> To: intel-gfx@lists.freedesktop.org
> Subject: [Intel-gfx] driver crashes if I try to het 2560 x 1440 @
> 50Hz CVT-RB running under Linux... Ideas?
>
> Hi everybody,
>
> I'm trying to setup a 27" screen on Fedora 23 (intel driver installer
> 1.4.0 Q4 2015) attached to an HDMI (ultrabook ASUS UX31A). I know it
> needs "reduced blank" and a timing of max 50Hz in order to work -
> with the max Bandwith on HDMI (at least that way it works on Windows
> using the same setup and "CustomResolution.exe") - But it dies not
> work so let me describe what I did so far:
>
> 1st guess)
> "cvt -r 2560 1440 50"
> >> ERROR: Multiple of 60Hz refresh rate required for reduced
> blanking.
> 2nd guess)
> Also The same seems to be true for "gtf"
> "gtf 2560 1440 50"
> # 2560x1440 @ 50.00 Hz (GTF) hsync: 74.10 kHz; pclk: 256.09 MHz
> Modeline "2560x1440_50.00" 256.09 2560 2728 3008 3456 1440 1441
> 1444 1482 -HSync +Vsync
> >>>> Does not work
> 3rd guess)
> A Modeline that I've found on the internet :
> xrandr --newmode "2560x1440_50.00_rb" 200.25 2560 2608 2640 2720 1440
> 1443 1448 1474 +HSync -Vsync
> xrandr --addmode HDMI1 "2560x1440_50.00_rb"
> xrandr --output HDMI1 --mode "2560x1440_50.00_rb"
> >>>> Does not work either => Results in:
> Apr 23 15:30:39 schleppi-ultra.balg.lan /usr/libexec/gdm-x-
> session[2986]: (II) intel(0): resizing framebuffer to 5504x1440
> Apr 23 15:30:39 schleppi-ultra.balg.lan /usr/libexec/gdm-x-
> session[2986]: (II) intel(0): switch to mode 2560x1440@49.9 on HDMI1
> using pipe 0, position (0, 0), rotation normal, reflection n
> Apr 23 15:30:51 schleppi-ultra.balg.lan /usr/libexec/gdm-x-
> session[2986]: (II) intel(0): resizing framebuffer to 5504x1180
> Apr 23 15:30:51 schleppi-ultra.balg.lan /usr/libexec/gdm-x-
> session[2986]: (II) intel(0): switch to mode 2048x1152@60.0 on HDMI1
> using pipe 0, position (0, 0), rotation normal, reflection n
> Apr 23 15:30:51 schleppi-ultra.balg.lan kernel:
> [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared
> fifo underrun on pipe B
> Apr 23 15:30:52 schleppi-ultra.balg.lan kernel:
> [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B
> FIFO underrun
>
> Last try)
> Read the modeline from "PowerStrip" from a running windows on the
> same machine that actually runs the wanted resolution:
> xrandr --newmode "2560x1440" 200.002 2560 2608 2640 2720 1440 1443
> 1448 1474 -hsync -vsync
> But this only switches to a black screen and causes the "pipe_off
> wait timed out" message in dmesg below...
>
> I've found the following two graphics related problems in the logs
> (dmesg) which might help as well:
> [ 2.625304] ------------[ cut here ]------------
> [ 2.625335] WARNING: CPU: 0 PID: 6 at
> drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x1b5/0x1c0
> [drm]()
> [ 2.625335] vblank wait timed out on crtc 0
> [ 2.625362] Modules linked in: i915 rtsx_usb_sdmmc mmc_core
> rtsx_usb hid_logitech_hidpp i2c_algo_bit drm_kms_helper drm serio_raw
> video fjes hid_logitech_dj
> [ 2.625368] CPU: 0 PID: 6 Comm: kworker/u8:0 Tainted: G
> U 4.4.7-300.fc23.x86_64 #1
> [ 2.625370] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS
> UX31A.219 06/14/2013
> [ 2.625380] Workqueue: events_unbound async_run_entry_fn
> [ 2.625385] 0000000000000286 00000000d003577f ffff88011a03f818
> ffffffff813b5f8e
> [ 2.625389] ffff88011a03f860 ffffffffa007e772 ffff88011a03f850
> ffffffff810a4122
> [ 2.625392] ffff88003e677000 0000000000000000 0000000000000000
> 0000000000000006
> [ 2.625394] Call Trace:
> [ 2.625405] [<ffffffff813b5f8e>] dump_stack+0x63/0x85
> [ 2.625413] [<ffffffff810a4122>] warn_slowpath_common+0x82/0xc0
> [ 2.625418] [<ffffffff810a41bc>] warn_slowpath_fmt+0x5c/0x80
> [ 2.625426] [<ffffffff810e6023>] ? finish_wait+0x53/0x70
> [ 2.625450] [<ffffffffa0052c15>] drm_wait_one_vblank+0x1b5/0x1c0
> [drm]
> [ 2.625456] [<ffffffff810e62e0>] ?
> wake_atomic_t_function+0x70/0x70
> [ 2.625552] [<ffffffffa01736d5>] intel_atomic_commit+0x475/0x1420
> [i915]
> [ 2.625588] [<ffffffffa006b1be>] ?
> drm_atomic_check_only+0x18e/0x590 [drm]
> [ 2.625618] [<ffffffffa006b5f7>] drm_atomic_commit+0x37/0x60
> [drm]
> [ 2.625634] [<ffffffffa00c409f>] restore_fbdev_mode+0x22f/0x260
> [drm_kms_helper]
> [ 2.625649] [<ffffffffa00c6273>]
> drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
> [ 2.625660] [<ffffffffa00c62ed>] drm_fb_helper_set_par+0x2d/0x50
> [drm_kms_helper]
> [ 2.625744] [<ffffffffa018a3ba>] intel_fbdev_set_par+0x1a/0x60
> [i915]
> [ 2.625750] [<ffffffff81428050>] fbcon_init+0x570/0x5f0
> [ 2.625755] [<ffffffff814a9aea>] visual_init+0xca/0x130
> [ 2.625759] [<ffffffff814ab981>] do_bind_con_driver+0x1c1/0x3a0
> [ 2.625764] [<ffffffff814abe99>] do_take_over_console+0x149/0x1a0
> [ 2.625769] [<ffffffff81423eb7>] do_fbcon_takeover+0x57/0xb0
> [ 2.625773] [<ffffffff81428ac8>] fbcon_event_notify+0x658/0x750
> [ 2.625778] [<ffffffff810c355a>] notifier_call_chain+0x4a/0x70
> [ 2.625783] [<ffffffff810c3897>]
> __blocking_notifier_call_chain+0x47/0x60
> [ 2.625787] [<ffffffff810c38c6>]
> blocking_notifier_call_chain+0x16/0x20
> [ 2.625792] [<ffffffff8142e71b>] fb_notifier_call_chain+0x1b/0x20
> [ 2.625798] [<ffffffff81430a3f>] register_framebuffer+0x20f/0x350
> [ 2.625812] [<ffffffffa00c659a>]
> drm_fb_helper_initial_config+0x28a/0x410 [drm_kms_helper]
> [ 2.625889] [<ffffffffa018aebb>]
> intel_fbdev_initial_config+0x1b/0x20 [i915]
> [ 2.625894] [<ffffffff810c4fca>] async_run_entry_fn+0x4a/0x140
> [ 2.625900] [<ffffffff810bc5c6>] process_one_work+0x156/0x430
> [ 2.625904] [<ffffffff810bc8ee>] worker_thread+0x4e/0x450
> [ 2.625909] [<ffffffff810bc8a0>] ? process_one_work+0x430/0x430
> [ 2.625912] [<ffffffff810c2678>] kthread+0xd8/0xf0
> [ 2.625916] [<ffffffff810c25a0>] ? kthread_worker_fn+0x160/0x160
> [ 2.625921] [<ffffffff817a144f>] ret_from_fork+0x3f/0x70
> [ 2.625925] [<ffffffff810c25a0>] ? kthread_worker_fn+0x160/0x160
> [ 2.625928] ---[ end trace cec8cc6321f01362 ]---
>
> 2) And this one as well:
>
> [ 13.375747] ------------[ cut here ]------------
> [ 13.375827] WARNING: CPU: 3 PID: 1894 at
> drivers/gpu/drm/i915/intel_display.c:1144
> intel_disable_pipe+0x2b6/0x2c0 [i915]()
> [ 13.375831] pipe_off wait timed out
> [ 13.375834] Modules linked in: cmac fuse xt_CHECKSUM
> iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat
> nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
> nf_conntrack tun bridge stp llc ebtable_filter ebtables
> ip6table_filter ip6_tables evdi(OE) uhid bnep rtsx_usb_ms memstick
> arc4 intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp kvm_intel
> btusb iTCO_wdt asus_nb_wmi kvm iTCO_vendor_support asus_wmi
> sparse_keymap btrtl btbcm btintel bluetooth uvcvideo
> videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core
> irqbypass v4l2_common crct10dif_pclmul iwlmvm crc32_pclmul vfat fat
> snd_hda_codec_hdmi videodev mac80211 crc32c_intel
> snd_hda_codec_realtek snd_hda_codec_generic media snd_hda_intel
> iwlwifi snd_hda_codec cfg80211 snd_hda_core snd_hwdep snd_seq joydev
> snd_seq_device
> [ 13.375920] snd_pcm i2c_i801 lpc_ich rfkill wmi int3403_thermal
> acpi_als mei_me kfifo_buf industrialio snd_timer int3402_thermal mei
> int3400_thermal int340x_thermal_zone acpi_thermal_rel snd tpm_tis
> shpchp soundcore tpm nfsd binfmt_misc nfs_acl lockd auth_rpcgss grace
> sunrpc i915 rtsx_usb_sdmmc mmc_core rtsx_usb hid_logitech_hidpp
> i2c_algo_bit drm_kms_helper drm serio_raw video fjes hid_logitech_dj
> [ 13.375971] CPU: 3 PID: 1894 Comm: gnome-shell Tainted: G U
> W OE 4.4.7-300.fc23.x86_64 #1
> [ 13.375975] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS
> UX31A.219 06/14/2013
> [ 13.375979] 0000000000200286 00000000827c27d7 ffff880115447a78
> ffffffff813b5f8e
> [ 13.375985] ffff880115447ac0 ffffffffa01d6de8 ffff880115447ab0
> ffffffff810a4122
> [ 13.375991] ffff88003d940000 0000000000070008 00000000fffb9ff6
> 0000000000070008
> [ 13.375996] Call Trace:
> [ 13.376011] [<ffffffff813b5f8e>] dump_stack+0x63/0x85
> [ 13.376021] [<ffffffff810a4122>] warn_slowpath_common+0x82/0xc0
> [ 13.376027] [<ffffffff810a41bc>] warn_slowpath_fmt+0x5c/0x80
> [ 13.376086] [<ffffffffa016a446>] intel_disable_pipe+0x2b6/0x2c0
> [i915]
> [ 13.376137] [<ffffffffa016a7fc>] ironlake_crtc_disable+0x8c/0x7c0
> [i915]
> [ 13.376182] [<ffffffffa0166adc>] ?
> intel_crtc_disable_planes+0xdc/0xf0 [i915]
> [ 13.376231] [<ffffffffa0173387>] intel_atomic_commit+0x127/0x1420
> [i915]
> [ 13.376283] [<ffffffffa006b1be>] ?
> drm_atomic_check_only+0x18e/0x590 [drm]
> [ 13.376320] [<ffffffffa006acbd>] ?
> drm_atomic_set_mode_prop_for_crtc+0x2d/0x110 [drm]
> [ 13.376350] [<ffffffffa006b5f7>] drm_atomic_commit+0x37/0x60
> [drm]
> [ 13.376373] [<ffffffffa00c34c6>]
> drm_atomic_helper_set_config+0x76/0xb0 [drm_kms_helper]
> [ 13.376405] [<ffffffffa005ab62>]
> drm_mode_set_config_internal+0x62/0x100 [drm]
> [ 13.376434] [<ffffffffa005eee2>] drm_mode_setcrtc+0x3d2/0x4f0
> [drm]
> [ 13.376457] [<ffffffffa0050602>] drm_ioctl+0x152/0x540 [drm]
> [ 13.376485] [<ffffffffa005eb10>] ? drm_mode_setplane+0x1b0/0x1b0
> [drm]
> [ 13.376494] [<ffffffff813407fc>] ? selinux_file_ioctl+0x10c/0x1c0
> [ 13.376503] [<ffffffff81241428>] do_vfs_ioctl+0x298/0x480
> [ 13.376510] [<ffffffff8122ff5e>] ? ____fput+0xe/0x10
> [ 13.376518] [<ffffffff813380b3>] ? security_file_ioctl+0x43/0x60
> [ 13.376524] [<ffffffff81241689>] SyS_ioctl+0x79/0x90
> [ 13.376533] [<ffffffff817a10ee>]
> entry_SYSCALL_64_fastpath+0x12/0x71
> [ 13.376592] ---[ end trace cec8cc6321f01363 ]---
> I've tried this using Wayland and Classic X as well ...
> Any hints on how to get this thing up and running with this stuff -
> attached Display is a DELL U2715H ?? -
> Any more helpful information needed ?
> lspci -kvnn
> 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen
> Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00
> [VGA controller])
> Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
> Flags: bus master, fast devsel, latency 0, IRQ 28
> Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
> Memory at e0000000 (64-bit, prefetchable) [size=256M]
> I/O ports at f000 [size=64]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [d0] Power Management version 2
> Capabilities: [a4] PCI Advanced Features
> Kernel driver in use: i915
> Kernel modules: i915
>
> modinfo i915
> filename: /lib/modules/4.4.7-
> 300.fc23.x86_64/kernel/drivers/gpu/drm/i915/i915.ko.xz
> license: GPL and additional rights
> description: Intel Graphics
> author: Intel Corporation
> author: Tungsten Graphics, Inc.
> firmware: i915/bxt_dmc_ver1.bin
> firmware: i915/skl_dmc_ver1.bin
> firmware: i915/skl_guc_ver4.bin
>
>
> Hoping to see any more hints that I did not think about so far ...
> Cheers..
> Andreas
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: driver crashes if I try to het 2560 x 1440 @ 50Hz CVT-RB running under Linux... Ideas?
2016-04-26 20:05 ` Andreas Balg
@ 2016-05-10 16:25 ` Marius Vlad
0 siblings, 0 replies; 4+ messages in thread
From: Marius Vlad @ 2016-05-10 16:25 UTC (permalink / raw)
To: Andreas Balg; +Cc: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 18325 bytes --]
Hi,
If this still happens, and you can compile and use
drm-intel-nightly (from https://cgit.freedesktop.org/drm-intel/,
a build guide is available at [2]) please submit a bug at [1].
[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
[2] https://01.org/linuxgraphics/documentation/build-guide-0
On Tue, Apr 26, 2016 at 10:05:43PM +0200, Andreas Balg wrote:
>
> As I cannot reinstall the entire machine from scratch I tried first to
> verify the issue using a Fedora 23 - Live USB Stick (which still runs
> on Kernel 4.2.3) = > It practically show exactly the same
> results/errors.
>
> I've also cleaned my machine very thoroughly from any packages
> installed or updated using the intel-graphics-installer and
> downgraded/replaced everything using the current stable fedora packages
> and even removed dkms entirely and reinstalled the kernel and kernel-
> modules:
>
> But the error remains the same:
>
> Packages removed/replaced/downgraded:
>
> cairo.i686 1.14.4-23.intel20154
> cairo.x86_64 1.14.4-23.intel20154
> cairo-gobject.x86_64 1.14.4-23.intel20154
> intel-gpu-tools.x86_64 2.99.917-23.intel20154
> libva-intel-driver.i686 1.6.2-23.intel20154
> libva-intel-driver.x86_64 1.6.2-23.intel20154
> xorg-x11-drv-intel.x86_64 2.99.917-23.intel20154
>
> intel-linux-graphics-installer.x86_64 1.4.0-23.intel20154
>
> Kernel from USB-Live medium was:
> Linux localhost 4.2.3-300.fc23.x86_64 #1 SMP Mon Oct 5 15:42:54
> UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
>
> The error message from dmesg:
>
> [ 22.767160] ------------[ cut here ]------------
> [ 22.767232] WARNING: CPU: 1 PID: 1792 at
> drivers/gpu/drm/i915/intel_display.c:1064
> intel_disable_pipe+0x28d/0x2a0 [i915]()
> [ 22.767236] pipe_off wait timed out
> [ 22.767239] Modules linked in: rfcomm xt_CHECKSUM ipt_MASQUERADE
> nf_nat_masquerade_ipv4 tun fuse nf_conntrack_netbios_ns
> nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT nf_reject_ipv6
> xt_conntrack ebtable_nat ebtable_filter ebtable_broute bridge ebtables
> ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
> ip6table_mangle ip6table_security ip6table_filter ip6_tables
> iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
> nf_nat nf_conntrack iptable_mangle iptable_security bnep rtsx_usb_ms
> memstick arc4 uvcvideo videobuf2_vmalloc videobuf2_core
> videobuf2_memops v4l2_common iwlmvm videodev mac80211 intel_rapl
> snd_usb_audio snd_usbmidi_lib media iosf_mbi x86_pkg_temp_thermal
> coretemp kvm_intel kvm snd_rawmidi iTCO_wdt iTCO_vendor_support
> asus_nb_wmi asus_wmi sparse_keymap
> [ 22.767322] btusb btrtl btbcm btintel bluetooth snd_hda_codec_hdmi
> snd_hda_codec_realtek snd_hda_codec_generic iwlwifi snd_hda_intel
> snd_hda_codec cfg80211 snd_hda_core snd_hwdep snd_seq snd_seq_device
> snd_pcm joydev snd_timer snd acpi_als int3402_thermal rfkill mei_me
> i2c_i801 int3403_thermal int340x_thermal_zone kfifo_buf industrialio
> shpchp int3400_thermal acpi_thermal_rel tpm_tis tpm lpc_ich soundcore
> mei nfsd auth_rpcgss nfs_acl lockd grace isofs squashfs
> hid_logitech_hidpp hid_logitech_dj i915 crct10dif_pclmul crc32_pclmul
> crc32c_intel 8021q garp stp llc cdc_mbim i2c_algo_bit mrp cdc_wdm
> ghash_clmulni_intel drm_kms_helper serio_raw drm cdc_ncm usbnet uas mii
> usb_storage wmi video rtsx_usb_sdmmc mmc_core rtsx_usb scsi_dh_rdac
> scsi_dh_emc scsi_dh_alua sunrpc loop
> [ 22.767426] CPU: 1 PID: 1792 Comm: Xorg Not tainted 4.2.3-
> 300.fc23.x86_64 #1
> [ 22.767430] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS
> UX31A.219 06/14/2013
> [ 22.767434] 0000000000000000 000000006a212948 ffff8801191cfa38
> ffffffff81771fca
> [ 22.767441] 0000000000000000 ffff8801191cfa90 ffff8801191cfa78
> ffffffff8109e4a6
> [ 22.767447] 0000000000000700 ffff88003da10000 0000000000070008
> 00000000fffbc193
> [ 22.767453] Call Trace:
> [ 22.767464] [<ffffffff81771fca>] dump_stack+0x45/0x57
> [ 22.767475] [<ffffffff8109e4a6>] warn_slowpath_common+0x86/0xc0
> [ 22.767482] [<ffffffff8109e535>] warn_slowpath_fmt+0x55/0x70
> [ 22.767530] [<ffffffffa022c41d>] intel_disable_pipe+0x28d/0x2a0
> [i915]
> [ 22.767569] [<ffffffffa022d0e3>] ironlake_crtc_disable+0x93/0x7f0
> [i915]
> [ 22.767611] [<ffffffffa0241a33>] ?
> intel_frontbuffer_flush+0x63/0x70 [i915]
> [ 22.767651] [<ffffffffa023502c>] __intel_set_mode+0x94c/0xb60
> [i915]
> [ 22.767689] [<ffffffffa023654f>] ?
> intel_modeset_compute_config+0x3af/0xb60 [i915]
> [ 22.767738] [<ffffffffa023bee6>] intel_crtc_set_config+0x2b6/0x580
> [i915]
> [ 22.767804] [<ffffffffa0106326>]
> drm_mode_set_config_internal+0x66/0x100 [drm]
> [ 22.767926] [<ffffffffa010a809>] drm_mode_setcrtc+0x3e9/0x500 [drm]
> [ 22.767948] [<ffffffffa00fb365>] drm_ioctl+0x125/0x610 [drm]
> [ 22.767976] [<ffffffffa010a420>] ? drm_mode_setplane+0x1b0/0x1b0
> [drm]
> [ 22.767992] [<ffffffff812312b5>] do_vfs_ioctl+0x295/0x470
> [ 22.768000] [<ffffffff8132930d>] ? selinux_file_ioctl+0x4d/0xc0
> [ 22.768006] [<ffffffff81231509>] SyS_ioctl+0x79/0x90
> [ 22.768014] [<ffffffff810acf1e>] ? SyS_rt_sigprocmask+0x8e/0xc0
> [ 22.768022] [<ffffffff817789ae>]
> entry_SYSCALL_64_fastpath+0x12/0x71
> [ 22.768029] ---[ end trace b2da396d1e42e1ca ]---
> [ 23.711060] [drm:intel_set_pch_fifo_underrun_reporting [i915]]
> *ERROR* uncleared pch fifo underrun on pch transcoder A
> [ 23.711113] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR*
> PCH transcoder A FIFO underrun
>
>
> Seems basically the same to me ....
>
> Cheers
>
>
> Am Dienstag, den 26.04.2016, 17:18 +0000 schrieb Parenteau, Paul A:
> > Have you tried this setup using Fedora 23 without the 1.4.0
> > Installer? If not, please do and report back.
> >
> > From: Intel-gfx [mailto:intel-gfx-bounces@lists.freedesktop.org] On
> > Behalf Of Andreas Balg
> > Sent: Tuesday, April 26, 2016 10:08 AM
> > To: intel-gfx@lists.freedesktop.org
> > Subject: [Intel-gfx] driver crashes if I try to het 2560 x 1440 @
> > 50Hz CVT-RB running under Linux... Ideas?
> >
> > Hi everybody,
> >
> > I'm trying to setup a 27" screen on Fedora 23 (intel driver installer
> > 1.4.0 Q4 2015) attached to an HDMI (ultrabook ASUS UX31A). I know it
> > needs "reduced blank" and a timing of max 50Hz in order to work -
> > with the max Bandwith on HDMI (at least that way it works on Windows
> > using the same setup and "CustomResolution.exe") - But it dies not
> > work so let me describe what I did so far:
> >
> > 1st guess)
> > "cvt -r 2560 1440 50"
> > >> ERROR: Multiple of 60Hz refresh rate required for reduced
> > blanking.
> > 2nd guess)
> > Also The same seems to be true for "gtf"
> > "gtf 2560 1440 50"
> > # 2560x1440 @ 50.00 Hz (GTF) hsync: 74.10 kHz; pclk: 256.09 MHz
> > Modeline "2560x1440_50.00" 256.09 2560 2728 3008 3456 1440 1441
> > 1444 1482 -HSync +Vsync
> > >>>> Does not work
> > 3rd guess)
> > A Modeline that I've found on the internet :
> > xrandr --newmode "2560x1440_50.00_rb" 200.25 2560 2608 2640 2720 1440
> > 1443 1448 1474 +HSync -Vsync
> > xrandr --addmode HDMI1 "2560x1440_50.00_rb"
> > xrandr --output HDMI1 --mode "2560x1440_50.00_rb"
> > >>>> Does not work either => Results in:
> > Apr 23 15:30:39 schleppi-ultra.balg.lan /usr/libexec/gdm-x-
> > session[2986]: (II) intel(0): resizing framebuffer to 5504x1440
> > Apr 23 15:30:39 schleppi-ultra.balg.lan /usr/libexec/gdm-x-
> > session[2986]: (II) intel(0): switch to mode 2560x1440@49.9 on HDMI1
> > using pipe 0, position (0, 0), rotation normal, reflection n
> > Apr 23 15:30:51 schleppi-ultra.balg.lan /usr/libexec/gdm-x-
> > session[2986]: (II) intel(0): resizing framebuffer to 5504x1180
> > Apr 23 15:30:51 schleppi-ultra.balg.lan /usr/libexec/gdm-x-
> > session[2986]: (II) intel(0): switch to mode 2048x1152@60.0 on HDMI1
> > using pipe 0, position (0, 0), rotation normal, reflection n
> > Apr 23 15:30:51 schleppi-ultra.balg.lan kernel:
> > [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared
> > fifo underrun on pipe B
> > Apr 23 15:30:52 schleppi-ultra.balg.lan kernel:
> > [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B
> > FIFO underrun
> >
> > Last try)
> > Read the modeline from "PowerStrip" from a running windows on the
> > same machine that actually runs the wanted resolution:
> > xrandr --newmode "2560x1440" 200.002 2560 2608 2640 2720 1440 1443
> > 1448 1474 -hsync -vsync
> > But this only switches to a black screen and causes the "pipe_off
> > wait timed out" message in dmesg below...
> >
> > I've found the following two graphics related problems in the logs
> > (dmesg) which might help as well:
> > [ 2.625304] ------------[ cut here ]------------
> > [ 2.625335] WARNING: CPU: 0 PID: 6 at
> > drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x1b5/0x1c0
> > [drm]()
> > [ 2.625335] vblank wait timed out on crtc 0
> > [ 2.625362] Modules linked in: i915 rtsx_usb_sdmmc mmc_core
> > rtsx_usb hid_logitech_hidpp i2c_algo_bit drm_kms_helper drm serio_raw
> > video fjes hid_logitech_dj
> > [ 2.625368] CPU: 0 PID: 6 Comm: kworker/u8:0 Tainted: G
> > U 4.4.7-300.fc23.x86_64 #1
> > [ 2.625370] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS
> > UX31A.219 06/14/2013
> > [ 2.625380] Workqueue: events_unbound async_run_entry_fn
> > [ 2.625385] 0000000000000286 00000000d003577f ffff88011a03f818
> > ffffffff813b5f8e
> > [ 2.625389] ffff88011a03f860 ffffffffa007e772 ffff88011a03f850
> > ffffffff810a4122
> > [ 2.625392] ffff88003e677000 0000000000000000 0000000000000000
> > 0000000000000006
> > [ 2.625394] Call Trace:
> > [ 2.625405] [<ffffffff813b5f8e>] dump_stack+0x63/0x85
> > [ 2.625413] [<ffffffff810a4122>] warn_slowpath_common+0x82/0xc0
> > [ 2.625418] [<ffffffff810a41bc>] warn_slowpath_fmt+0x5c/0x80
> > [ 2.625426] [<ffffffff810e6023>] ? finish_wait+0x53/0x70
> > [ 2.625450] [<ffffffffa0052c15>] drm_wait_one_vblank+0x1b5/0x1c0
> > [drm]
> > [ 2.625456] [<ffffffff810e62e0>] ?
> > wake_atomic_t_function+0x70/0x70
> > [ 2.625552] [<ffffffffa01736d5>] intel_atomic_commit+0x475/0x1420
> > [i915]
> > [ 2.625588] [<ffffffffa006b1be>] ?
> > drm_atomic_check_only+0x18e/0x590 [drm]
> > [ 2.625618] [<ffffffffa006b5f7>] drm_atomic_commit+0x37/0x60
> > [drm]
> > [ 2.625634] [<ffffffffa00c409f>] restore_fbdev_mode+0x22f/0x260
> > [drm_kms_helper]
> > [ 2.625649] [<ffffffffa00c6273>]
> > drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
> > [ 2.625660] [<ffffffffa00c62ed>] drm_fb_helper_set_par+0x2d/0x50
> > [drm_kms_helper]
> > [ 2.625744] [<ffffffffa018a3ba>] intel_fbdev_set_par+0x1a/0x60
> > [i915]
> > [ 2.625750] [<ffffffff81428050>] fbcon_init+0x570/0x5f0
> > [ 2.625755] [<ffffffff814a9aea>] visual_init+0xca/0x130
> > [ 2.625759] [<ffffffff814ab981>] do_bind_con_driver+0x1c1/0x3a0
> > [ 2.625764] [<ffffffff814abe99>] do_take_over_console+0x149/0x1a0
> > [ 2.625769] [<ffffffff81423eb7>] do_fbcon_takeover+0x57/0xb0
> > [ 2.625773] [<ffffffff81428ac8>] fbcon_event_notify+0x658/0x750
> > [ 2.625778] [<ffffffff810c355a>] notifier_call_chain+0x4a/0x70
> > [ 2.625783] [<ffffffff810c3897>]
> > __blocking_notifier_call_chain+0x47/0x60
> > [ 2.625787] [<ffffffff810c38c6>]
> > blocking_notifier_call_chain+0x16/0x20
> > [ 2.625792] [<ffffffff8142e71b>] fb_notifier_call_chain+0x1b/0x20
> > [ 2.625798] [<ffffffff81430a3f>] register_framebuffer+0x20f/0x350
> > [ 2.625812] [<ffffffffa00c659a>]
> > drm_fb_helper_initial_config+0x28a/0x410 [drm_kms_helper]
> > [ 2.625889] [<ffffffffa018aebb>]
> > intel_fbdev_initial_config+0x1b/0x20 [i915]
> > [ 2.625894] [<ffffffff810c4fca>] async_run_entry_fn+0x4a/0x140
> > [ 2.625900] [<ffffffff810bc5c6>] process_one_work+0x156/0x430
> > [ 2.625904] [<ffffffff810bc8ee>] worker_thread+0x4e/0x450
> > [ 2.625909] [<ffffffff810bc8a0>] ? process_one_work+0x430/0x430
> > [ 2.625912] [<ffffffff810c2678>] kthread+0xd8/0xf0
> > [ 2.625916] [<ffffffff810c25a0>] ? kthread_worker_fn+0x160/0x160
> > [ 2.625921] [<ffffffff817a144f>] ret_from_fork+0x3f/0x70
> > [ 2.625925] [<ffffffff810c25a0>] ? kthread_worker_fn+0x160/0x160
> > [ 2.625928] ---[ end trace cec8cc6321f01362 ]---
> >
> > 2) And this one as well:
> >
> > [ 13.375747] ------------[ cut here ]------------
> > [ 13.375827] WARNING: CPU: 3 PID: 1894 at
> > drivers/gpu/drm/i915/intel_display.c:1144
> > intel_disable_pipe+0x2b6/0x2c0 [i915]()
> > [ 13.375831] pipe_off wait timed out
> > [ 13.375834] Modules linked in: cmac fuse xt_CHECKSUM
> > iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat
> > nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
> > nf_conntrack tun bridge stp llc ebtable_filter ebtables
> > ip6table_filter ip6_tables evdi(OE) uhid bnep rtsx_usb_ms memstick
> > arc4 intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp kvm_intel
> > btusb iTCO_wdt asus_nb_wmi kvm iTCO_vendor_support asus_wmi
> > sparse_keymap btrtl btbcm btintel bluetooth uvcvideo
> > videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core
> > irqbypass v4l2_common crct10dif_pclmul iwlmvm crc32_pclmul vfat fat
> > snd_hda_codec_hdmi videodev mac80211 crc32c_intel
> > snd_hda_codec_realtek snd_hda_codec_generic media snd_hda_intel
> > iwlwifi snd_hda_codec cfg80211 snd_hda_core snd_hwdep snd_seq joydev
> > snd_seq_device
> > [ 13.375920] snd_pcm i2c_i801 lpc_ich rfkill wmi int3403_thermal
> > acpi_als mei_me kfifo_buf industrialio snd_timer int3402_thermal mei
> > int3400_thermal int340x_thermal_zone acpi_thermal_rel snd tpm_tis
> > shpchp soundcore tpm nfsd binfmt_misc nfs_acl lockd auth_rpcgss grace
> > sunrpc i915 rtsx_usb_sdmmc mmc_core rtsx_usb hid_logitech_hidpp
> > i2c_algo_bit drm_kms_helper drm serio_raw video fjes hid_logitech_dj
> > [ 13.375971] CPU: 3 PID: 1894 Comm: gnome-shell Tainted: G U
> > W OE 4.4.7-300.fc23.x86_64 #1
> > [ 13.375975] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS
> > UX31A.219 06/14/2013
> > [ 13.375979] 0000000000200286 00000000827c27d7 ffff880115447a78
> > ffffffff813b5f8e
> > [ 13.375985] ffff880115447ac0 ffffffffa01d6de8 ffff880115447ab0
> > ffffffff810a4122
> > [ 13.375991] ffff88003d940000 0000000000070008 00000000fffb9ff6
> > 0000000000070008
> > [ 13.375996] Call Trace:
> > [ 13.376011] [<ffffffff813b5f8e>] dump_stack+0x63/0x85
> > [ 13.376021] [<ffffffff810a4122>] warn_slowpath_common+0x82/0xc0
> > [ 13.376027] [<ffffffff810a41bc>] warn_slowpath_fmt+0x5c/0x80
> > [ 13.376086] [<ffffffffa016a446>] intel_disable_pipe+0x2b6/0x2c0
> > [i915]
> > [ 13.376137] [<ffffffffa016a7fc>] ironlake_crtc_disable+0x8c/0x7c0
> > [i915]
> > [ 13.376182] [<ffffffffa0166adc>] ?
> > intel_crtc_disable_planes+0xdc/0xf0 [i915]
> > [ 13.376231] [<ffffffffa0173387>] intel_atomic_commit+0x127/0x1420
> > [i915]
> > [ 13.376283] [<ffffffffa006b1be>] ?
> > drm_atomic_check_only+0x18e/0x590 [drm]
> > [ 13.376320] [<ffffffffa006acbd>] ?
> > drm_atomic_set_mode_prop_for_crtc+0x2d/0x110 [drm]
> > [ 13.376350] [<ffffffffa006b5f7>] drm_atomic_commit+0x37/0x60
> > [drm]
> > [ 13.376373] [<ffffffffa00c34c6>]
> > drm_atomic_helper_set_config+0x76/0xb0 [drm_kms_helper]
> > [ 13.376405] [<ffffffffa005ab62>]
> > drm_mode_set_config_internal+0x62/0x100 [drm]
> > [ 13.376434] [<ffffffffa005eee2>] drm_mode_setcrtc+0x3d2/0x4f0
> > [drm]
> > [ 13.376457] [<ffffffffa0050602>] drm_ioctl+0x152/0x540 [drm]
> > [ 13.376485] [<ffffffffa005eb10>] ? drm_mode_setplane+0x1b0/0x1b0
> > [drm]
> > [ 13.376494] [<ffffffff813407fc>] ? selinux_file_ioctl+0x10c/0x1c0
> > [ 13.376503] [<ffffffff81241428>] do_vfs_ioctl+0x298/0x480
> > [ 13.376510] [<ffffffff8122ff5e>] ? ____fput+0xe/0x10
> > [ 13.376518] [<ffffffff813380b3>] ? security_file_ioctl+0x43/0x60
> > [ 13.376524] [<ffffffff81241689>] SyS_ioctl+0x79/0x90
> > [ 13.376533] [<ffffffff817a10ee>]
> > entry_SYSCALL_64_fastpath+0x12/0x71
> > [ 13.376592] ---[ end trace cec8cc6321f01363 ]---
> > I've tried this using Wayland and Classic X as well ...
> > Any hints on how to get this thing up and running with this stuff -
> > attached Display is a DELL U2715H ?? -
> > Any more helpful information needed ?
> > lspci -kvnn
> > 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen
> > Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00
> > [VGA controller])
> > Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
> > Flags: bus master, fast devsel, latency 0, IRQ 28
> > Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
> > Memory at e0000000 (64-bit, prefetchable) [size=256M]
> > I/O ports at f000 [size=64]
> > Expansion ROM at <unassigned> [disabled]
> > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> > Capabilities: [d0] Power Management version 2
> > Capabilities: [a4] PCI Advanced Features
> > Kernel driver in use: i915
> > Kernel modules: i915
> >
> > modinfo i915
> > filename: /lib/modules/4.4.7-
> > 300.fc23.x86_64/kernel/drivers/gpu/drm/i915/i915.ko.xz
> > license: GPL and additional rights
> > description: Intel Graphics
> > author: Intel Corporation
> > author: Tungsten Graphics, Inc.
> > firmware: i915/bxt_dmc_ver1.bin
> > firmware: i915/skl_dmc_ver1.bin
> > firmware: i915/skl_guc_ver4.bin
> >
> >
> > Hoping to see any more hints that I did not think about so far ...
> > Cheers..
> > Andreas
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-05-10 16:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-26 17:07 driver crashes if I try to het 2560 x 1440 @ 50Hz CVT-RB running under Linux... Ideas? Andreas Balg
2016-04-26 17:18 ` Parenteau, Paul A
2016-04-26 20:05 ` Andreas Balg
2016-05-10 16:25 ` Marius Vlad
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.