[PATCH v10 0/3] gpio: dwapb: add gpio-signaled acpi event support for power button

[PATCH v10 0/3] gpio: dwapb: add gpio-signaled acpi event support for power button

[Jiang Qiu]

This patchset adds gpio-signaled acpi events support for power button on hisilicon
D02 board.

The three patches respectively:
        - remove name from dwapb_port_property
        - convert device node to fwnode
        - add gpio-signaled acpi event support

   This patchset is based on
   https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
   branch "devel"

Changes v9 -> v10:
   - fixed one minor

Changes v8 -> v9:
   - fixed a low-level compile warning

Changes v7 -> v8:
   - fixed few minors

Changes v6 -> v7:
   - add patch1 by Alan's suggestion

Changes v5 -> v6:
   - merge patch 2~3 to one patch
   - small fixed from Alan's suggestion
   - fixed subject title reference commit history

Changes v4 -> v5:
   - split into three patchs
   - add Andy's ACKs
   
Changes v3 -> v4:
   - re-organize this two patchs by Andy's suggestion

Changes v2 -> v3:
   - fixed the build error reported by Kbuild test robot

Changes v1 -> v2: 
   - rebase to branch "devel" of Linus Walleij's repository
   - split in two patch as suggested by Andy S
   - add Mika's ACKs

Jiang Qiu (3):
  gpio: dwapb: remove name from dwapb_port_property
  gpio: dwapb: convert device node to fwnode
  gpio: dwapb: add gpio-signaled acpi event support

 drivers/gpio/gpio-dwapb.c                | 77 +++++++++++++++++++-------------
 drivers/mfd/intel_quark_i2c_gpio.c       |  3 +-
 include/linux/platform_data/gpio-dwapb.h |  3 +-
 3 files changed, 47 insertions(+), 36 deletions(-)

-- 
1.9.1

[PATCH v10 0/3] gpio: dwapb: add gpio-signaled acpi event support for power button

[Jiang Qiu]

This patchset adds gpio-signaled acpi events support for power button on hisilicon
D02 board.

The three patches respectively:
        - remove name from dwapb_port_property
        - convert device node to fwnode
        - add gpio-signaled acpi event support

   This patchset is based on
   https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
   branch "devel"

Changes v9 -> v10:
   - fixed one minor

Changes v8 -> v9:
   - fixed a low-level compile warning

Changes v7 -> v8:
   - fixed few minors

Changes v6 -> v7:
   - add patch1 by Alan's suggestion

Changes v5 -> v6:
   - merge patch 2~3 to one patch
   - small fixed from Alan's suggestion
   - fixed subject title reference commit history

Changes v4 -> v5:
   - split into three patchs
   - add Andy's ACKs
   
Changes v3 -> v4:
   - re-organize this two patchs by Andy's suggestion

Changes v2 -> v3:
   - fixed the build error reported by Kbuild test robot

Changes v1 -> v2: 
   - rebase to branch "devel" of Linus Walleij's repository
   - split in two patch as suggested by Andy S
   - add Mika's ACKs

Jiang Qiu (3):
  gpio: dwapb: remove name from dwapb_port_property
  gpio: dwapb: convert device node to fwnode
  gpio: dwapb: add gpio-signaled acpi event support

 drivers/gpio/gpio-dwapb.c                | 77 +++++++++++++++++++-------------
 drivers/mfd/intel_quark_i2c_gpio.c       |  3 +-
 include/linux/platform_data/gpio-dwapb.h |  3 +-
 3 files changed, 47 insertions(+), 36 deletions(-)

-- 
1.9.1

[PATCH v10 1/3] gpio: dwapb: remove name from dwapb_port_property

[Jiang Qiu]

This patch removed the name property from dwapb_port_property.
The name property is redundant, since we can get this info
from dwapb_gpio dev node.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiang Qiu <qiujiang@huawei.com>
---
 drivers/gpio/gpio-dwapb.c                | 24 +++++++++++-------------
 drivers/mfd/intel_quark_i2c_gpio.c       |  1 -
 include/linux/platform_data/gpio-dwapb.h |  1 -
 3 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 597de1e..772d743 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -409,8 +409,8 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 	err = bgpio_init(&port->gc, gpio->dev, 4, dat, set, NULL, dirout,
 			 NULL, false);
 	if (err) {
-		dev_err(gpio->dev, "failed to init gpio chip for %s\n",
-			pp->name);
+		dev_err(gpio->dev, "failed to init gpio chip for port%d\n",
+			port->idx);
 		return err;
 	}
 
@@ -429,8 +429,8 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 
 	err = gpiochip_add_data(&port->gc, port);
 	if (err)
-		dev_err(gpio->dev, "failed to register gpiochip for %s\n",
-			pp->name);
+		dev_err(gpio->dev, "failed to register gpiochip for port%d\n",
+			port->idx);
 	else
 		port->is_registered = true;
 
@@ -480,15 +480,16 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 
 		if (of_property_read_u32(port_np, "reg", &pp->idx) ||
 		    pp->idx >= DWAPB_MAX_PORTS) {
-			dev_err(dev, "missing/invalid port index for %s\n",
-				port_np->full_name);
+			dev_err(dev,
+				"missing/invalid port index for port%d\n", i);
 			return ERR_PTR(-EINVAL);
 		}
 
 		if (of_property_read_u32(port_np, "snps,nr-gpios",
 					 &pp->ngpio)) {
-			dev_info(dev, "failed to get number of gpios for %s\n",
-				 port_np->full_name);
+			dev_info(dev,
+				 "failed to get number of gpios for port%d\n",
+				 i);
 			pp->ngpio = 32;
 		}
 
@@ -499,15 +500,12 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 		if (pp->idx == 0 &&
 		    of_property_read_bool(port_np, "interrupt-controller")) {
 			pp->irq = irq_of_parse_and_map(port_np, 0);
-			if (!pp->irq) {
-				dev_warn(dev, "no irq for bank %s\n",
-					 port_np->full_name);
-			}
+			if (!pp->irq)
+				dev_warn(dev, "no irq for port%d\n", pp->idx);
 		}
 
 		pp->irq_shared	= false;
 		pp->gpio_base	= -1;
-		pp->name	= port_np->full_name;
 	}
 
 	return pdata;
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index bdc5e27..a4ef99b 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -220,7 +220,6 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
 
 	/* Set the properties for portA */
 	pdata->properties->node		= NULL;
-	pdata->properties->name		= "intel-quark-x1000-gpio-portA";
 	pdata->properties->idx		= 0;
 	pdata->properties->ngpio	= INTEL_QUARK_MFD_NGPIO;
 	pdata->properties->gpio_base	= INTEL_QUARK_MFD_GPIO_BASE;
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
index 28702c8..955b579 100644
--- a/include/linux/platform_data/gpio-dwapb.h
+++ b/include/linux/platform_data/gpio-dwapb.h
@@ -16,7 +16,6 @@
 
 struct dwapb_port_property {
 	struct device_node *node;
-	const char	*name;
 	unsigned int	idx;
 	unsigned int	ngpio;
 	unsigned int	gpio_base;
-- 
1.9.1

[PATCH v10 1/3] gpio: dwapb: remove name from dwapb_port_property

[Jiang Qiu]

This patch removed the name property from dwapb_port_property.
The name property is redundant, since we can get this info
from dwapb_gpio dev node.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiang Qiu <qiujiang@huawei.com>
---
 drivers/gpio/gpio-dwapb.c                | 24 +++++++++++-------------
 drivers/mfd/intel_quark_i2c_gpio.c       |  1 -
 include/linux/platform_data/gpio-dwapb.h |  1 -
 3 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 597de1e..772d743 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -409,8 +409,8 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 	err = bgpio_init(&port->gc, gpio->dev, 4, dat, set, NULL, dirout,
 			 NULL, false);
 	if (err) {
-		dev_err(gpio->dev, "failed to init gpio chip for %s\n",
-			pp->name);
+		dev_err(gpio->dev, "failed to init gpio chip for port%d\n",
+			port->idx);
 		return err;
 	}
 
@@ -429,8 +429,8 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 
 	err = gpiochip_add_data(&port->gc, port);
 	if (err)
-		dev_err(gpio->dev, "failed to register gpiochip for %s\n",
-			pp->name);
+		dev_err(gpio->dev, "failed to register gpiochip for port%d\n",
+			port->idx);
 	else
 		port->is_registered = true;
 
@@ -480,15 +480,16 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 
 		if (of_property_read_u32(port_np, "reg", &pp->idx) ||
 		    pp->idx >= DWAPB_MAX_PORTS) {
-			dev_err(dev, "missing/invalid port index for %s\n",
-				port_np->full_name);
+			dev_err(dev,
+				"missing/invalid port index for port%d\n", i);
 			return ERR_PTR(-EINVAL);
 		}
 
 		if (of_property_read_u32(port_np, "snps,nr-gpios",
 					 &pp->ngpio)) {
-			dev_info(dev, "failed to get number of gpios for %s\n",
-				 port_np->full_name);
+			dev_info(dev,
+				 "failed to get number of gpios for port%d\n",
+				 i);
 			pp->ngpio = 32;
 		}
 
@@ -499,15 +500,12 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 		if (pp->idx == 0 &&
 		    of_property_read_bool(port_np, "interrupt-controller")) {
 			pp->irq = irq_of_parse_and_map(port_np, 0);
-			if (!pp->irq) {
-				dev_warn(dev, "no irq for bank %s\n",
-					 port_np->full_name);
-			}
+			if (!pp->irq)
+				dev_warn(dev, "no irq for port%d\n", pp->idx);
 		}
 
 		pp->irq_shared	= false;
 		pp->gpio_base	= -1;
-		pp->name	= port_np->full_name;
 	}
 
 	return pdata;
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index bdc5e27..a4ef99b 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -220,7 +220,6 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
 
 	/* Set the properties for portA */
 	pdata->properties->node		= NULL;
-	pdata->properties->name		= "intel-quark-x1000-gpio-portA";
 	pdata->properties->idx		= 0;
 	pdata->properties->ngpio	= INTEL_QUARK_MFD_NGPIO;
 	pdata->properties->gpio_base	= INTEL_QUARK_MFD_GPIO_BASE;
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
index 28702c8..955b579 100644
--- a/include/linux/platform_data/gpio-dwapb.h
+++ b/include/linux/platform_data/gpio-dwapb.h
@@ -16,7 +16,6 @@
 
 struct dwapb_port_property {
 	struct device_node *node;
-	const char	*name;
 	unsigned int	idx;
 	unsigned int	ngpio;
 	unsigned int	gpio_base;
-- 
1.9.1

Re: [PATCH v10 1/3] gpio: dwapb: remove name from dwapb_port_property

[Linus Walleij]

On Thu, Apr 28, 2016 at 11:32 AM, Jiang Qiu <qiujiang@huawei.com> wrote:

> This patch removed the name property from dwapb_port_property.
> The name property is redundant, since we can get this info
> from dwapb_gpio dev node.
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Jiang Qiu <qiujiang@huawei.com>

Hmmm just applied another version. Oh well, applying this
instead.

Yours,
Linus Walleij

Re: [PATCH v10 1/3] gpio: dwapb: remove name from dwapb_port_property

[Jiang Qiu]

在 4/29/2016 5:22 PM, Linus Walleij 写道:
> On Thu, Apr 28, 2016 at 11:32 AM, Jiang Qiu <qiujiang@huawei.com> wrote:
> 
>> This patch removed the name property from dwapb_port_property.
>> The name property is redundant, since we can get this info
>> from dwapb_gpio dev node.
>>
>> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>> Signed-off-by: Jiang Qiu <qiujiang@huawei.com>
> 
> Hmmm just applied another version. Oh well, applying this
> instead.

Hi, Linux, many thanks for applying.
> 
> Yours,
> Linus Walleij
> 
> .
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v10 1/3] gpio: dwapb: remove name from dwapb_port_property

[Jiang Qiu]

在 4/29/2016 5:22 PM, Linus Walleij 写道:
> On Thu, Apr 28, 2016 at 11:32 AM, Jiang Qiu <qiujiang@huawei.com> wrote:
> 
>> This patch removed the name property from dwapb_port_property.
>> The name property is redundant, since we can get this info
>> from dwapb_gpio dev node.
>>
>> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>> Signed-off-by: Jiang Qiu <qiujiang@huawei.com>
> 
> Hmmm just applied another version. Oh well, applying this
> instead.

Hi, Linux, many thanks for applying.
> 
> Yours,
> Linus Walleij
> 
> .
> 

[PATCH v10 2/3] gpio: dwapb: convert device node to fwnode

[Jiang Qiu]

This patch converts device node to fwnode for dwapb driver, so
as to provide a unified fwnode for DT and ACPI bindings.

Tested-by: Alan Tull <delicious.quinoa@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiang Qiu <qiujiang@huawei.com>
---
 drivers/gpio/gpio-dwapb.c                | 36 +++++++++++++++-----------------
 drivers/mfd/intel_quark_i2c_gpio.c       |  2 +-
 include/linux/platform_data/gpio-dwapb.h |  2 +-
 3 files changed, 19 insertions(+), 21 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 772d743..7517c2f 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -22,6 +22,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/spinlock.h>
 #include <linux/platform_data/gpio-dwapb.h>
 #include <linux/slab.h>
@@ -290,14 +291,14 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 				 struct dwapb_port_property *pp)
 {
 	struct gpio_chip *gc = &port->gc;
-	struct device_node *node = pp->node;
+	struct fwnode_handle  *fwnode = pp->fwnode;
 	struct irq_chip_generic	*irq_gc = NULL;
 	unsigned int hwirq, ngpio = gc->ngpio;
 	struct irq_chip_type *ct;
 	int err, i;
 
-	gpio->domain = irq_domain_add_linear(node, ngpio,
-					     &irq_generic_chip_ops, gpio);
+	gpio->domain = irq_domain_create_linear(fwnode, ngpio,
+						 &irq_generic_chip_ops, gpio);
 	if (!gpio->domain)
 		return;
 
@@ -415,7 +416,7 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 	}
 
 #ifdef CONFIG_OF_GPIO
-	port->gc.of_node = pp->node;
+	port->gc.of_node = to_of_node(pp->fwnode);
 #endif
 	port->gc.ngpio = pp->ngpio;
 	port->gc.base = pp->gpio_base;
@@ -447,19 +448,15 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
 }
 
 static struct dwapb_platform_data *
-dwapb_gpio_get_pdata_of(struct device *dev)
+dwapb_gpio_get_pdata(struct device *dev)
 {
-	struct device_node *node, *port_np;
+	struct fwnode_handle *fwnode;
 	struct dwapb_platform_data *pdata;
 	struct dwapb_port_property *pp;
 	int nports;
 	int i;
 
-	node = dev->of_node;
-	if (!IS_ENABLED(CONFIG_OF_GPIO) || !node)
-		return ERR_PTR(-ENODEV);
-
-	nports = of_get_child_count(node);
+	nports = device_get_child_node_count(dev);
 	if (nports == 0)
 		return ERR_PTR(-ENODEV);
 
@@ -474,18 +471,18 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 	pdata->nports = nports;
 
 	i = 0;
-	for_each_child_of_node(node, port_np) {
+	device_for_each_child_node(dev, fwnode)  {
 		pp = &pdata->properties[i++];
-		pp->node = port_np;
+		pp->fwnode = fwnode;
 
-		if (of_property_read_u32(port_np, "reg", &pp->idx) ||
+		if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) ||
 		    pp->idx >= DWAPB_MAX_PORTS) {
 			dev_err(dev,
 				"missing/invalid port index for port%d\n", i);
 			return ERR_PTR(-EINVAL);
 		}
 
-		if (of_property_read_u32(port_np, "snps,nr-gpios",
+		if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
 					 &pp->ngpio)) {
 			dev_info(dev,
 				 "failed to get number of gpios for port%d\n",
@@ -497,9 +494,10 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 		 * Only port A can provide interrupts in all configurations of
 		 * the IP.
 		 */
-		if (pp->idx == 0 &&
-		    of_property_read_bool(port_np, "interrupt-controller")) {
-			pp->irq = irq_of_parse_and_map(port_np, 0);
+		if (dev->of_node && pp->idx == 0 &&
+			fwnode_property_read_bool(fwnode,
+						  "interrupt-controller")) {
+			pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
 			if (!pp->irq)
 				dev_warn(dev, "no irq for port%d\n", pp->idx);
 		}
@@ -521,7 +519,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
 	struct dwapb_platform_data *pdata = dev_get_platdata(dev);
 
 	if (!pdata) {
-		pdata = dwapb_gpio_get_pdata_of(dev);
+		pdata = dwapb_gpio_get_pdata(dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
 	}
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index a4ef99b..a24b35f 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -219,7 +219,7 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
 		return -ENOMEM;
 
 	/* Set the properties for portA */
-	pdata->properties->node		= NULL;
+	pdata->properties->fwnode	= NULL;
 	pdata->properties->idx		= 0;
 	pdata->properties->ngpio	= INTEL_QUARK_MFD_NGPIO;
 	pdata->properties->gpio_base	= INTEL_QUARK_MFD_GPIO_BASE;
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
index 955b579..2dc7f4a 100644
--- a/include/linux/platform_data/gpio-dwapb.h
+++ b/include/linux/platform_data/gpio-dwapb.h
@@ -15,7 +15,7 @@
 #define GPIO_DW_APB_H
 
 struct dwapb_port_property {
-	struct device_node *node;
+	struct fwnode_handle *fwnode;
 	unsigned int	idx;
 	unsigned int	ngpio;
 	unsigned int	gpio_base;
-- 
1.9.1

[PATCH v10 2/3] gpio: dwapb: convert device node to fwnode

[Jiang Qiu]

This patch converts device node to fwnode for dwapb driver, so
as to provide a unified fwnode for DT and ACPI bindings.

Tested-by: Alan Tull <delicious.quinoa@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiang Qiu <qiujiang@huawei.com>
---
 drivers/gpio/gpio-dwapb.c                | 36 +++++++++++++++-----------------
 drivers/mfd/intel_quark_i2c_gpio.c       |  2 +-
 include/linux/platform_data/gpio-dwapb.h |  2 +-
 3 files changed, 19 insertions(+), 21 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 772d743..7517c2f 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -22,6 +22,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/spinlock.h>
 #include <linux/platform_data/gpio-dwapb.h>
 #include <linux/slab.h>
@@ -290,14 +291,14 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 				 struct dwapb_port_property *pp)
 {
 	struct gpio_chip *gc = &port->gc;
-	struct device_node *node = pp->node;
+	struct fwnode_handle  *fwnode = pp->fwnode;
 	struct irq_chip_generic	*irq_gc = NULL;
 	unsigned int hwirq, ngpio = gc->ngpio;
 	struct irq_chip_type *ct;
 	int err, i;
 
-	gpio->domain = irq_domain_add_linear(node, ngpio,
-					     &irq_generic_chip_ops, gpio);
+	gpio->domain = irq_domain_create_linear(fwnode, ngpio,
+						 &irq_generic_chip_ops, gpio);
 	if (!gpio->domain)
 		return;
 
@@ -415,7 +416,7 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 	}
 
 #ifdef CONFIG_OF_GPIO
-	port->gc.of_node = pp->node;
+	port->gc.of_node = to_of_node(pp->fwnode);
 #endif
 	port->gc.ngpio = pp->ngpio;
 	port->gc.base = pp->gpio_base;
@@ -447,19 +448,15 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
 }
 
 static struct dwapb_platform_data *
-dwapb_gpio_get_pdata_of(struct device *dev)
+dwapb_gpio_get_pdata(struct device *dev)
 {
-	struct device_node *node, *port_np;
+	struct fwnode_handle *fwnode;
 	struct dwapb_platform_data *pdata;
 	struct dwapb_port_property *pp;
 	int nports;
 	int i;
 
-	node = dev->of_node;
-	if (!IS_ENABLED(CONFIG_OF_GPIO) || !node)
-		return ERR_PTR(-ENODEV);
-
-	nports = of_get_child_count(node);
+	nports = device_get_child_node_count(dev);
 	if (nports == 0)
 		return ERR_PTR(-ENODEV);
 
@@ -474,18 +471,18 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 	pdata->nports = nports;
 
 	i = 0;
-	for_each_child_of_node(node, port_np) {
+	device_for_each_child_node(dev, fwnode)  {
 		pp = &pdata->properties[i++];
-		pp->node = port_np;
+		pp->fwnode = fwnode;
 
-		if (of_property_read_u32(port_np, "reg", &pp->idx) ||
+		if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) ||
 		    pp->idx >= DWAPB_MAX_PORTS) {
 			dev_err(dev,
 				"missing/invalid port index for port%d\n", i);
 			return ERR_PTR(-EINVAL);
 		}
 
-		if (of_property_read_u32(port_np, "snps,nr-gpios",
+		if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
 					 &pp->ngpio)) {
 			dev_info(dev,
 				 "failed to get number of gpios for port%d\n",
@@ -497,9 +494,10 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 		 * Only port A can provide interrupts in all configurations of
 		 * the IP.
 		 */
-		if (pp->idx == 0 &&
-		    of_property_read_bool(port_np, "interrupt-controller")) {
-			pp->irq = irq_of_parse_and_map(port_np, 0);
+		if (dev->of_node && pp->idx == 0 &&
+			fwnode_property_read_bool(fwnode,
+						  "interrupt-controller")) {
+			pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
 			if (!pp->irq)
 				dev_warn(dev, "no irq for port%d\n", pp->idx);
 		}
@@ -521,7 +519,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
 	struct dwapb_platform_data *pdata = dev_get_platdata(dev);
 
 	if (!pdata) {
-		pdata = dwapb_gpio_get_pdata_of(dev);
+		pdata = dwapb_gpio_get_pdata(dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
 	}
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index a4ef99b..a24b35f 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -219,7 +219,7 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
 		return -ENOMEM;
 
 	/* Set the properties for portA */
-	pdata->properties->node		= NULL;
+	pdata->properties->fwnode	= NULL;
 	pdata->properties->idx		= 0;
 	pdata->properties->ngpio	= INTEL_QUARK_MFD_NGPIO;
 	pdata->properties->gpio_base	= INTEL_QUARK_MFD_GPIO_BASE;
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
index 955b579..2dc7f4a 100644
--- a/include/linux/platform_data/gpio-dwapb.h
+++ b/include/linux/platform_data/gpio-dwapb.h
@@ -15,7 +15,7 @@
 #define GPIO_DW_APB_H
 
 struct dwapb_port_property {
-	struct device_node *node;
+	struct fwnode_handle *fwnode;
 	unsigned int	idx;
 	unsigned int	ngpio;
 	unsigned int	gpio_base;
-- 
1.9.1

Re: [PATCH v10 2/3] gpio: dwapb: convert device node to fwnode

[Linus Walleij]

On Thu, Apr 28, 2016 at 11:32 AM, Jiang Qiu <qiujiang@huawei.com> wrote:

> This patch converts device node to fwnode for dwapb driver, so
> as to provide a unified fwnode for DT and ACPI bindings.
>
> Tested-by: Alan Tull <delicious.quinoa@gmail.com>
> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Jiang Qiu <qiujiang@huawei.com>

Patch applied.

Yours,
Linus Walleij

[PATCH v10 3/3] gpio: dwapb: add gpio-signaled acpi event support

[Jiang Qiu]

This patch adds gpio-signaled acpi event support. It is used for
power button on hisilicon D02 board, an arm64 platform.

The corresponding DSDT file is defined as follows:
Device(GPI0) {
	Name(_HID, "HISI0181")
	Name(_ADR, 0)
	Name(_UID, 0)

	Name (_CRS, ResourceTemplate ()  {
		Memory32Fixed (ReadWrite, 0x802e0000, 0x10000)
		Interrupt (ResourceConsumer, Level, ActiveHigh,
		Exclusive,,,)  {344}
	})

	Device(PRTa) {
		Name (_DSD, Package () {
		Package () {
			Package () {"reg",0},
			Package () {"snps,nr-gpios",32},
		}
		})
	}

	Name (_AEI, ResourceTemplate () {
		GpioInt(Edge, ActiveLow, ExclusiveAndWake,
		PullUp, , " \\_SB.GPI0") {8}
	})

	Method (_E08, 0x0, NotSerialized) {
		Notify (\_SB.PWRB, 0x80)
	}
}

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiang Qiu <qiujiang@huawei.com>
---
 drivers/gpio/gpio-dwapb.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 7517c2f..b235d70 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -7,6 +7,7 @@
  *
  * All enquiries to support@picochip.com
  */
+#include <linux/acpi.h>
 #include <linux/gpio/driver.h>
 /* FIXME: for gpio_get_value(), replace this with direct register read */
 #include <linux/gpio.h>
@@ -27,6 +28,8 @@
 #include <linux/platform_data/gpio-dwapb.h>
 #include <linux/slab.h>
 
+#include "gpiolib.h"
+
 #define GPIO_SWPORTA_DR		0x00
 #define GPIO_SWPORTA_DDR	0x04
 #define GPIO_SWPORTB_DR		0x0c
@@ -435,6 +438,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 	else
 		port->is_registered = true;
 
+	/* Add GPIO-signaled ACPI event support */
+	if (pp->irq)
+		acpi_gpiochip_request_interrupts(&port->gc);
+
 	return err;
 }
 
@@ -502,6 +509,9 @@ dwapb_gpio_get_pdata(struct device *dev)
 				dev_warn(dev, "no irq for port%d\n", pp->idx);
 		}
 
+		if (has_acpi_companion(dev) && pp->idx == 0)
+			pp->irq = platform_get_irq(to_platform_device(dev), 0);
+
 		pp->irq_shared	= false;
 		pp->gpio_base	= -1;
 	}
@@ -576,6 +586,12 @@ static const struct of_device_id dwapb_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dwapb_of_match);
 
+static const struct acpi_device_id dwapb_acpi_match[] = {
+	{"HISI0181", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, dwapb_acpi_match);
+
 #ifdef CONFIG_PM_SLEEP
 static int dwapb_gpio_suspend(struct device *dev)
 {
@@ -670,6 +686,7 @@ static struct platform_driver dwapb_gpio_driver = {
 		.name	= "gpio-dwapb",
 		.pm	= &dwapb_gpio_pm_ops,
 		.of_match_table = of_match_ptr(dwapb_of_match),
+		.acpi_match_table = ACPI_PTR(dwapb_acpi_match),
 	},
 	.probe		= dwapb_gpio_probe,
 	.remove		= dwapb_gpio_remove,
-- 
1.9.1

[PATCH v10 3/3] gpio: dwapb: add gpio-signaled acpi event support

[Jiang Qiu]

This patch adds gpio-signaled acpi event support. It is used for
power button on hisilicon D02 board, an arm64 platform.

The corresponding DSDT file is defined as follows:
Device(GPI0) {
	Name(_HID, "HISI0181")
	Name(_ADR, 0)
	Name(_UID, 0)

	Name (_CRS, ResourceTemplate ()  {
		Memory32Fixed (ReadWrite, 0x802e0000, 0x10000)
		Interrupt (ResourceConsumer, Level, ActiveHigh,
		Exclusive,,,)  {344}
	})

	Device(PRTa) {
		Name (_DSD, Package () {
		Package () {
			Package () {"reg",0},
			Package () {"snps,nr-gpios",32},
		}
		})
	}

	Name (_AEI, ResourceTemplate () {
		GpioInt(Edge, ActiveLow, ExclusiveAndWake,
		PullUp, , " \\_SB.GPI0") {8}
	})

	Method (_E08, 0x0, NotSerialized) {
		Notify (\_SB.PWRB, 0x80)
	}
}

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiang Qiu <qiujiang@huawei.com>
---
 drivers/gpio/gpio-dwapb.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 7517c2f..b235d70 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -7,6 +7,7 @@
  *
  * All enquiries to support@picochip.com
  */
+#include <linux/acpi.h>
 #include <linux/gpio/driver.h>
 /* FIXME: for gpio_get_value(), replace this with direct register read */
 #include <linux/gpio.h>
@@ -27,6 +28,8 @@
 #include <linux/platform_data/gpio-dwapb.h>
 #include <linux/slab.h>
 
+#include "gpiolib.h"
+
 #define GPIO_SWPORTA_DR		0x00
 #define GPIO_SWPORTA_DDR	0x04
 #define GPIO_SWPORTB_DR		0x0c
@@ -435,6 +438,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 	else
 		port->is_registered = true;
 
+	/* Add GPIO-signaled ACPI event support */
+	if (pp->irq)
+		acpi_gpiochip_request_interrupts(&port->gc);
+
 	return err;
 }
 
@@ -502,6 +509,9 @@ dwapb_gpio_get_pdata(struct device *dev)
 				dev_warn(dev, "no irq for port%d\n", pp->idx);
 		}
 
+		if (has_acpi_companion(dev) && pp->idx == 0)
+			pp->irq = platform_get_irq(to_platform_device(dev), 0);
+
 		pp->irq_shared	= false;
 		pp->gpio_base	= -1;
 	}
@@ -576,6 +586,12 @@ static const struct of_device_id dwapb_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dwapb_of_match);
 
+static const struct acpi_device_id dwapb_acpi_match[] = {
+	{"HISI0181", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, dwapb_acpi_match);
+
 #ifdef CONFIG_PM_SLEEP
 static int dwapb_gpio_suspend(struct device *dev)
 {
@@ -670,6 +686,7 @@ static struct platform_driver dwapb_gpio_driver = {
 		.name	= "gpio-dwapb",
 		.pm	= &dwapb_gpio_pm_ops,
 		.of_match_table = of_match_ptr(dwapb_of_match),
+		.acpi_match_table = ACPI_PTR(dwapb_acpi_match),
 	},
 	.probe		= dwapb_gpio_probe,
 	.remove		= dwapb_gpio_remove,
-- 
1.9.1

Re: [PATCH v10 3/3] gpio: dwapb: add gpio-signaled acpi event support

[Linus Walleij]

On Thu, Apr 28, 2016 at 11:32 AM, Jiang Qiu <qiujiang@huawei.com> wrote:

> This patch adds gpio-signaled acpi event support. It is used for
> power button on hisilicon D02 board, an arm64 platform.
>
> The corresponding DSDT file is defined as follows:
> Device(GPI0) {
>         Name(_HID, "HISI0181")
>         Name(_ADR, 0)
>         Name(_UID, 0)
>
>         Name (_CRS, ResourceTemplate ()  {
>                 Memory32Fixed (ReadWrite, 0x802e0000, 0x10000)
>                 Interrupt (ResourceConsumer, Level, ActiveHigh,
>                 Exclusive,,,)  {344}
>         })
>
>         Device(PRTa) {
>                 Name (_DSD, Package () {
>                 Package () {
>                         Package () {"reg",0},
>                         Package () {"snps,nr-gpios",32},
>                 }
>                 })
>         }
>
>         Name (_AEI, ResourceTemplate () {
>                 GpioInt(Edge, ActiveLow, ExclusiveAndWake,
>                 PullUp, , " \\_SB.GPI0") {8}
>         })
>
>         Method (_E08, 0x0, NotSerialized) {
>                 Notify (\_SB.PWRB, 0x80)
>         }
> }
>
> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Jiang Qiu <qiujiang@huawei.com>

Patch applied.

Yours,
Linus Walleij