All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <tony@atomide.com>, <jarkko.nikula@bitmer.com>, <paul@pwsan.com>,
	<lgirdwood@gmail.com>, <broonie@kernel.org>
Cc: <t-kristo@ti.com>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<alsa-devel@alsa-project.org>
Subject: [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
Date: Fri, 29 Apr 2016 13:53:16 +0300	[thread overview]
Message-ID: <1461927202-17677-2-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1461927202-17677-1-git-send-email-peter.ujfalusi@ti.com>

The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
sidetone only receives the ICLK from the main McBSP module.
Since the McBSP and sidetone is using the very same clock from PRCM level
the sidetone must not have the prcm section to check the clock status since
the sidetone is only used when McBSP is already configured.
If two separate hwmods looking at the same bit and they would use
pm_runtime in nested way (as it must happen with McBSP and it's ST module)
the hwmod would warn, because the idlest will not match what it is expected
after enable/disable of the clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9869a75c5d96..d72ee6185d5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1322,16 +1322,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp2_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
@@ -1344,16 +1336,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp3_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* SR common */
-- 
2.8.1

WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: tony@atomide.com, jarkko.nikula@bitmer.com, paul@pwsan.com,
	lgirdwood@gmail.com, broonie@kernel.org
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org, t-kristo@ti.com,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
Date: Fri, 29 Apr 2016 13:53:16 +0300	[thread overview]
Message-ID: <1461927202-17677-2-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1461927202-17677-1-git-send-email-peter.ujfalusi@ti.com>

The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
sidetone only receives the ICLK from the main McBSP module.
Since the McBSP and sidetone is using the very same clock from PRCM level
the sidetone must not have the prcm section to check the clock status since
the sidetone is only used when McBSP is already configured.
If two separate hwmods looking at the same bit and they would use
pm_runtime in nested way (as it must happen with McBSP and it's ST module)
the hwmod would warn, because the idlest will not match what it is expected
after enable/disable of the clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9869a75c5d96..d72ee6185d5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1322,16 +1322,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp2_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
@@ -1344,16 +1336,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp3_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* SR common */
-- 
2.8.1

WARNING: multiple messages have this Message-ID (diff)
From: peter.ujfalusi@ti.com (Peter Ujfalusi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
Date: Fri, 29 Apr 2016 13:53:16 +0300	[thread overview]
Message-ID: <1461927202-17677-2-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1461927202-17677-1-git-send-email-peter.ujfalusi@ti.com>

The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
sidetone only receives the ICLK from the main McBSP module.
Since the McBSP and sidetone is using the very same clock from PRCM level
the sidetone must not have the prcm section to check the clock status since
the sidetone is only used when McBSP is already configured.
If two separate hwmods looking at the same bit and they would use
pm_runtime in nested way (as it must happen with McBSP and it's ST module)
the hwmod would warn, because the idlest will not match what it is expected
after enable/disable of the clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9869a75c5d96..d72ee6185d5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1322,16 +1322,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp2_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
@@ -1344,16 +1336,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp3_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* SR common */
-- 
2.8.1

  reply	other threads:[~2016-04-29 10:55 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-29 10:53 [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support Peter Ujfalusi
2016-04-29 10:53 ` Peter Ujfalusi
2016-04-29 10:53 ` Peter Ujfalusi
2016-04-29 10:53 ` Peter Ujfalusi [this message]
2016-04-29 10:53   ` [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 15:34   ` Tony Lindgren
2016-04-29 15:34     ` Tony Lindgren
2016-04-29 15:34     ` Tony Lindgren
2016-04-29 10:53 ` [PATCH v3 2/7] ARM: dts: omap3: Add clocks to McBSP nodes Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53 ` [PATCH v3 3/7] ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53 ` [PATCH v3 4/7] ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53 ` [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup() Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-05-02 10:41   ` Mark Brown
2016-05-02 10:41     ` Mark Brown
2016-05-02 10:41     ` Mark Brown
2016-04-29 10:53 ` [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-05-02 10:42   ` Mark Brown
2016-05-02 10:42     ` Mark Brown
2016-04-29 10:53 ` [PATCH v3 7/7] ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-05-11  8:44 ` [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support Peter Ujfalusi
2016-05-11  8:44   ` Peter Ujfalusi
2016-05-11  8:44   ` Peter Ujfalusi
2016-05-12 16:42   ` Tony Lindgren
2016-05-12 16:42     ` Tony Lindgren
2016-05-12 16:42     ` Tony Lindgren
2016-05-13 11:45     ` Peter Ujfalusi
2016-05-13 11:45       ` Peter Ujfalusi
2016-05-13 11:45       ` Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461927202-17677-2-git-send-email-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jarkko.nikula@bitmer.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.