All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keerthy <j-keerthy@ti.com>
To: <broonie@kernel.org>, <tony@atomide.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <lee.jones@linaro.org>
Cc: <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <nikita@compulab.co.il>,
	<nm@ti.com>, <j-keerthy@ti.com>
Subject: [PATCH 2/8] Documentation: regulator: tps65218: Update examples
Date: Wed, 11 May 2016 11:18:05 +0530	[thread overview]
Message-ID: <1462945691-904-3-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1462945691-904-1-git-send-email-j-keerthy@ti.com>

This updates the device tree according to the preferred way of parsing
the nodes using the regulator framework.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 .../devicetree/bindings/regulator/tps65218.txt     | 87 ++++++++++++++++++----
 1 file changed, 71 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
index fccc1d2..8d3d919 100644
--- a/Documentation/devicetree/bindings/regulator/tps65218.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -1,23 +1,78 @@
 TPS65218 family of regulators
 
 Required properties:
-For tps65218 regulators/LDOs
-- compatible:
-  - "ti,tps65218-dcdc1" for DCDC1
-  - "ti,tps65218-dcdc2" for DCDC2
-  - "ti,tps65218-dcdc3" for DCDC3
-  - "ti,tps65218-dcdc4" for DCDC4
-  - "ti,tps65218-dcdc5" for DCDC5
-  - "ti,tps65218-dcdc6" for DCDC6
-  - "ti,tps65218-ldo1" for LDO1
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
+- compatible: "ti,tps65218"
+- reg: I2C slave address
+- list of regulators provided by this controller, must be named
+  after their hardware counterparts: dcdc[1-6] and ldo1
+- This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  The valid names for regulators are:
+  tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4,
+  regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3
+  Each regulator is defined using the standard binding for regulators.
 
 Example:
+tps65218: tps65218@24 {
+	reg = <0x24>;
+	compatible = "ti,tps65218";
+	interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	dcdc1: regulator-dcdc1 {
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <912000>;
+		regulator-max-microvolt = <1144000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc2: regulator-dcdc2 {
+		regulator-name = "vdd_mpu";
+		regulator-min-microvolt = <912000>;
+		regulator-max-microvolt = <1378000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc3: regulator-dcdc3 {
+		regulator-name = "vdcdc3";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc5: regulator-dcdc5 {
+		regulator-name = "v1_0bat";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc6: regulator-dcdc6 {
+		regulator-name = "v1_8bat";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ldo1: regulator-ldo1 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 
-	xyz: regulator@0 {
-		compatible = "ti,tps65218-dcdc1";
-		regulator-min-microvolt  = <1000000>;
-		regulator-max-microvolt  = <3000000>;
+	ls3: regulator-ls3 {
+		regulator-min-microvolt = <100000>;
+		regulator-max-microvolt = <1000000>;
 	};
+};
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: broonie@kernel.org, tony@atomide.com, robh+dt@kernel.org,
	mark.rutland@arm.com, lee.jones@linaro.org
Cc: nm@ti.com, devicetree@vger.kernel.org, nikita@compulab.co.il,
	j-keerthy@ti.com, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] Documentation: regulator: tps65218: Update examples
Date: Wed, 11 May 2016 11:18:05 +0530	[thread overview]
Message-ID: <1462945691-904-3-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1462945691-904-1-git-send-email-j-keerthy@ti.com>

This updates the device tree according to the preferred way of parsing
the nodes using the regulator framework.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 .../devicetree/bindings/regulator/tps65218.txt     | 87 ++++++++++++++++++----
 1 file changed, 71 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
index fccc1d2..8d3d919 100644
--- a/Documentation/devicetree/bindings/regulator/tps65218.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -1,23 +1,78 @@
 TPS65218 family of regulators
 
 Required properties:
-For tps65218 regulators/LDOs
-- compatible:
-  - "ti,tps65218-dcdc1" for DCDC1
-  - "ti,tps65218-dcdc2" for DCDC2
-  - "ti,tps65218-dcdc3" for DCDC3
-  - "ti,tps65218-dcdc4" for DCDC4
-  - "ti,tps65218-dcdc5" for DCDC5
-  - "ti,tps65218-dcdc6" for DCDC6
-  - "ti,tps65218-ldo1" for LDO1
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
+- compatible: "ti,tps65218"
+- reg: I2C slave address
+- list of regulators provided by this controller, must be named
+  after their hardware counterparts: dcdc[1-6] and ldo1
+- This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  The valid names for regulators are:
+  tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4,
+  regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3
+  Each regulator is defined using the standard binding for regulators.
 
 Example:
+tps65218: tps65218@24 {
+	reg = <0x24>;
+	compatible = "ti,tps65218";
+	interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	dcdc1: regulator-dcdc1 {
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <912000>;
+		regulator-max-microvolt = <1144000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc2: regulator-dcdc2 {
+		regulator-name = "vdd_mpu";
+		regulator-min-microvolt = <912000>;
+		regulator-max-microvolt = <1378000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc3: regulator-dcdc3 {
+		regulator-name = "vdcdc3";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc5: regulator-dcdc5 {
+		regulator-name = "v1_0bat";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc6: regulator-dcdc6 {
+		regulator-name = "v1_8bat";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ldo1: regulator-ldo1 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 
-	xyz: regulator@0 {
-		compatible = "ti,tps65218-dcdc1";
-		regulator-min-microvolt  = <1000000>;
-		regulator-max-microvolt  = <3000000>;
+	ls3: regulator-ls3 {
+		regulator-min-microvolt = <100000>;
+		regulator-max-microvolt = <1000000>;
 	};
+};
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: j-keerthy@ti.com (Keerthy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] Documentation: regulator: tps65218: Update examples
Date: Wed, 11 May 2016 11:18:05 +0530	[thread overview]
Message-ID: <1462945691-904-3-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1462945691-904-1-git-send-email-j-keerthy@ti.com>

This updates the device tree according to the preferred way of parsing
the nodes using the regulator framework.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 .../devicetree/bindings/regulator/tps65218.txt     | 87 ++++++++++++++++++----
 1 file changed, 71 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
index fccc1d2..8d3d919 100644
--- a/Documentation/devicetree/bindings/regulator/tps65218.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -1,23 +1,78 @@
 TPS65218 family of regulators
 
 Required properties:
-For tps65218 regulators/LDOs
-- compatible:
-  - "ti,tps65218-dcdc1" for DCDC1
-  - "ti,tps65218-dcdc2" for DCDC2
-  - "ti,tps65218-dcdc3" for DCDC3
-  - "ti,tps65218-dcdc4" for DCDC4
-  - "ti,tps65218-dcdc5" for DCDC5
-  - "ti,tps65218-dcdc6" for DCDC6
-  - "ti,tps65218-ldo1" for LDO1
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
+- compatible: "ti,tps65218"
+- reg: I2C slave address
+- list of regulators provided by this controller, must be named
+  after their hardware counterparts: dcdc[1-6] and ldo1
+- This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  The valid names for regulators are:
+  tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4,
+  regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3
+  Each regulator is defined using the standard binding for regulators.
 
 Example:
+tps65218: tps65218 at 24 {
+	reg = <0x24>;
+	compatible = "ti,tps65218";
+	interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	dcdc1: regulator-dcdc1 {
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <912000>;
+		regulator-max-microvolt = <1144000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc2: regulator-dcdc2 {
+		regulator-name = "vdd_mpu";
+		regulator-min-microvolt = <912000>;
+		regulator-max-microvolt = <1378000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc3: regulator-dcdc3 {
+		regulator-name = "vdcdc3";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc5: regulator-dcdc5 {
+		regulator-name = "v1_0bat";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc6: regulator-dcdc6 {
+		regulator-name = "v1_8bat";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ldo1: regulator-ldo1 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 
-	xyz: regulator at 0 {
-		compatible = "ti,tps65218-dcdc1";
-		regulator-min-microvolt  = <1000000>;
-		regulator-max-microvolt  = <3000000>;
+	ls3: regulator-ls3 {
+		regulator-min-microvolt = <100000>;
+		regulator-max-microvolt = <1000000>;
 	};
+};
-- 
1.9.1

  parent reply	other threads:[~2016-05-11  6:03 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-11  5:48 [PATCH 0/8] regulator: tps65218: Clean ups Keerthy
2016-05-11  5:48 ` Keerthy
2016-05-11  5:48 ` Keerthy
2016-05-11  5:48 ` [PATCH 1/8] mfd: tps65218: Remove redundant read wrapper Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48 ` Keerthy [this message]
2016-05-11  5:48   ` [PATCH 2/8] Documentation: regulator: tps65218: Update examples Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-16 14:48   ` Rob Herring
2016-05-16 14:48     ` Rob Herring
2016-05-16 14:48     ` Rob Herring
2016-05-17  3:22     ` Keerthy
2016-05-17  3:22       ` Keerthy
2016-05-17  3:22       ` Keerthy
2016-05-11  5:48 ` [PATCH 3/8] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48   ` Keerthy
2016-06-03 11:08   ` Keerthy
2016-06-03 11:08     ` Keerthy
2016-06-03 11:08     ` Keerthy
2016-06-06  9:00     ` Lee Jones
2016-06-06  9:00       ` Lee Jones
2016-06-08 15:50   ` Lee Jones
2016-06-08 15:50     ` Lee Jones
2016-06-08 16:09     ` Keerthy
2016-06-08 16:09       ` Keerthy
2016-06-08 16:09       ` Keerthy
2016-05-11  5:48 ` [PATCH 4/8] regulator: tps65218: Remove all the compatibles Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11 10:21   ` Mark Brown
2016-05-11  5:48 ` [PATCH 5/8] ARM: dts: AM437X-GP-EVM: Remove redundant regulator compatibles Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-12 17:08   ` Tony Lindgren
2016-05-12 17:08     ` Tony Lindgren
2016-05-12 17:08     ` Tony Lindgren
2016-05-11  5:48 ` [PATCH 6/8] ARM: dts: AM437X-SK-EVM: " Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48 ` [PATCH 7/8] ARM: dts: AM437X-CM-T43: " Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48 ` [PATCH 8/8] ARM: dts: AM43X-EPOS-EVM: " Keerthy
2016-05-11  5:48   ` Keerthy
2016-05-11  5:48   ` Keerthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462945691-904-3-git-send-email-j-keerthy@ti.com \
    --to=j-keerthy@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=nikita@compulab.co.il \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.