From: Roger Quadros <rogerq@ti.com> To: <balbi@kernel.org> Cc: <tony@atomide.com>, <Joao.Pinto@synopsys.com>, <sergei.shtylyov@cogentembedded.com>, <peter.chen@freescale.com>, <jun.li@freescale.com>, <grygorii.strashko@ti.com>, <yoshihiro.shimoda.uh@renesas.com>, <nsekhar@ti.com>, <b-liu@ti.com>, <linux-usb@vger.kernel.org>, <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com> Subject: [PATCH v8 3/5] usb: dwc3: omap: Don't set POWERPRESENT Date: Wed, 11 May 2016 17:36:44 +0300 [thread overview] Message-ID: <1462977406-22806-4-git-send-email-rogerq@ti.com> (raw) In-Reply-To: <1462977406-22806-1-git-send-email-rogerq@ti.com> TRM [1] recommends that POWERPRESENT bit must not be set and left at it's default value of 0. [1] OMAP542x TRM - http://www.ti.com/lit/pdf/swpu249 Section 23.11.4.5.1 Mailbox VBUS/ID Management "Because PIPE powerpresent has a different meaning in host and in device mode, and because of the redundancy with the UTMI signals, the controller ORes together the appropriate PIPE and UTMI inputs to create its internal VBUS status. For that reason, it is recommended to leave field USBOTGSS_UTMI_OTG_STATUS[9] POWERPRESENT at its default value (=0), and only to fill in the USB2 VBUS status fields in the same register." Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/usb/dwc3/dwc3-omap.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index b58546c..dd55e08 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -234,8 +234,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID | USBOTGSS_UTMI_OTG_CTRL_SESSEND); - val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID; dwc3_omap_write_utmi_ctrl(omap, val); break; @@ -244,8 +243,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND; val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID - | USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + | USBOTGSS_UTMI_OTG_CTRL_SESSVALID; dwc3_omap_write_utmi_ctrl(omap, val); break; @@ -256,8 +254,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, case OMAP_DWC3_VBUS_OFF: val = dwc3_omap_read_utmi_ctrl(omap); val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT); + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID); val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND | USBOTGSS_UTMI_OTG_CTRL_IDDIG; dwc3_omap_write_utmi_ctrl(omap, val); -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com> To: balbi@kernel.org Cc: tony@atomide.com, Joao.Pinto@synopsys.com, sergei.shtylyov@cogentembedded.com, peter.chen@freescale.com, jun.li@freescale.com, grygorii.strashko@ti.com, yoshihiro.shimoda.uh@renesas.com, nsekhar@ti.com, b-liu@ti.com, linux-usb@vger.kernel.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros <rogerq@ti.com> Subject: [PATCH v8 3/5] usb: dwc3: omap: Don't set POWERPRESENT Date: Wed, 11 May 2016 17:36:44 +0300 [thread overview] Message-ID: <1462977406-22806-4-git-send-email-rogerq@ti.com> (raw) In-Reply-To: <1462977406-22806-1-git-send-email-rogerq@ti.com> TRM [1] recommends that POWERPRESENT bit must not be set and left at it's default value of 0. [1] OMAP542x TRM - http://www.ti.com/lit/pdf/swpu249 Section 23.11.4.5.1 Mailbox VBUS/ID Management "Because PIPE powerpresent has a different meaning in host and in device mode, and because of the redundancy with the UTMI signals, the controller ORes together the appropriate PIPE and UTMI inputs to create its internal VBUS status. For that reason, it is recommended to leave field USBOTGSS_UTMI_OTG_STATUS[9] POWERPRESENT at its default value (=0), and only to fill in the USB2 VBUS status fields in the same register." Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/usb/dwc3/dwc3-omap.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index b58546c..dd55e08 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -234,8 +234,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID | USBOTGSS_UTMI_OTG_CTRL_SESSEND); - val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID; dwc3_omap_write_utmi_ctrl(omap, val); break; @@ -244,8 +243,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND; val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID - | USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + | USBOTGSS_UTMI_OTG_CTRL_SESSVALID; dwc3_omap_write_utmi_ctrl(omap, val); break; @@ -256,8 +254,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, case OMAP_DWC3_VBUS_OFF: val = dwc3_omap_read_utmi_ctrl(omap); val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT); + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID); val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND | USBOTGSS_UTMI_OTG_CTRL_IDDIG; dwc3_omap_write_utmi_ctrl(omap, val); -- 2.7.4
next prev parent reply other threads:[~2016-05-11 14:38 UTC|newest] Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-05-11 14:36 [PATCH v8 0/5] dwc3: omap: fixes and dual-role preparation Roger Quadros 2016-05-11 14:36 ` Roger Quadros 2016-05-11 14:36 ` [PATCH v8 1/5] usb: dwc3: omap: use request_threaded_irq() Roger Quadros 2016-05-11 14:36 ` Roger Quadros 2016-05-11 14:36 ` [PATCH v8 2/5] usb: dwc3: omap: Mark the interrupt handler as shared Roger Quadros 2016-05-11 14:36 ` Roger Quadros 2016-05-11 14:36 ` Roger Quadros [this message] 2016-05-11 14:36 ` [PATCH v8 3/5] usb: dwc3: omap: Don't set POWERPRESENT Roger Quadros 2016-05-11 14:36 ` [PATCH v8 4/5] usb: dwc3: omap: Pass VBUS and ID events transparently Roger Quadros 2016-05-11 14:36 ` Roger Quadros 2016-05-11 14:36 ` [PATCH v8 5/5] usb: dwc3: core: cleanup IRQ resources Roger Quadros 2016-05-11 14:36 ` Roger Quadros 2016-05-24 9:35 ` Felipe Balbi 2016-05-24 9:35 ` Felipe Balbi 2016-05-24 12:35 ` Roger Quadros 2016-05-24 12:35 ` Roger Quadros 2016-06-01 7:46 ` [PATCH v9 " Roger Quadros 2016-06-01 7:46 ` Roger Quadros 2016-06-01 8:06 ` Felipe Balbi 2016-06-01 8:06 ` Felipe Balbi 2016-06-07 9:28 ` Roger Quadros 2016-06-07 9:28 ` Roger Quadros 2016-06-02 11:52 ` Grygorii Strashko 2016-06-02 11:52 ` Grygorii Strashko 2016-06-07 9:34 ` Roger Quadros 2016-06-07 9:34 ` Roger Quadros 2016-06-07 11:49 ` Grygorii Strashko 2016-06-07 11:49 ` Grygorii Strashko 2016-06-07 12:44 ` Roger Quadros 2016-06-07 12:44 ` Roger Quadros 2016-06-07 13:09 ` Felipe Balbi 2016-06-07 14:05 ` Roger Quadros 2016-06-07 14:05 ` Roger Quadros 2016-06-10 7:56 ` Roger Quadros 2016-06-10 7:56 ` Roger Quadros 2016-06-10 8:02 ` Roger Quadros 2016-06-10 8:02 ` Roger Quadros 2016-06-10 8:04 ` Roger Quadros 2016-06-10 8:04 ` Roger Quadros 2016-06-10 8:18 ` Felipe Balbi 2016-06-10 8:32 ` Roger Quadros 2016-06-10 8:32 ` Roger Quadros 2016-06-10 9:18 ` Felipe Balbi 2016-06-10 8:11 ` Felipe Balbi 2016-06-10 9:56 ` [PATCH v10 " Roger Quadros 2016-06-10 9:56 ` Roger Quadros 2016-06-10 10:39 ` Sergei Shtylyov 2016-06-10 11:35 ` Roger Quadros 2016-06-10 11:35 ` Roger Quadros 2016-06-10 11:44 ` Sergei Shtylyov 2016-06-10 11:46 ` Roger Quadros 2016-06-10 11:46 ` Roger Quadros 2016-06-10 12:22 ` Sergei Shtylyov 2016-06-10 11:48 ` [PATCH v11 " Roger Quadros 2016-06-10 11:48 ` Roger Quadros
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1462977406-22806-4-git-send-email-rogerq@ti.com \ --to=rogerq@ti.com \ --cc=Joao.Pinto@synopsys.com \ --cc=b-liu@ti.com \ --cc=balbi@kernel.org \ --cc=grygorii.strashko@ti.com \ --cc=jun.li@freescale.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=nsekhar@ti.com \ --cc=peter.chen@freescale.com \ --cc=sergei.shtylyov@cogentembedded.com \ --cc=tony@atomide.com \ --cc=yoshihiro.shimoda.uh@renesas.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.