[PATCH v3 0/2] drm: Add various helpers for simple drivers

[PATCH v3 0/2] drm: Add various helpers for simple drivers

[Noralf Trønnes]

This patchset adds various helpers that was originally part of the
tinydrm patchset.

4 patches from the previous version have been applied and 2 are now left.

Essentially it adds 2 functions:
- drm_fb_cma_create_with_funcs()
  CMA backed framebuffer supporting a dirty() callback.
- drm_simple_display_pipe_init()
  Plane, crtc and encoder are collapsed into one entity.


Changes since v2:
- drm: Add helper for simple display pipeline
  - Drop Kconfig knob DRM_KMS_HELPER
  - Expand documentation

Changes since v1:
- Drop patch: drm/panel: Add helper for simple panel connector
- Add fb-helper and fb-cma-helper doc patches
- Add drm/atomic: Don't skip drm_bridge_*() calls if !drm_encoder_helper_funcs
- Add drm_atomic_helper_best_encoder()
- drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()
  - Expand docs
- drm: Add helper for simple display pipeline
  - Add DOC header and add to gpu.tmpl
  - Fix docs: @funcs is optional, "negative error code",
    "This hook is optional."
  - Add checks to drm_simple_kms_plane_atomic_check()

Noralf Trønnes (2):
  drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()
  drm: Add helper for simple display pipeline

 Documentation/DocBook/gpu.tmpl          |   6 +
 drivers/gpu/drm/Makefile                |   2 +-
 drivers/gpu/drm/drm_fb_cma_helper.c     |  31 ++++-
 drivers/gpu/drm/drm_simple_kms_helper.c | 209 ++++++++++++++++++++++++++++++++
 include/drm/drm_fb_cma_helper.h         |   3 +
 include/drm/drm_simple_kms_helper.h     |  95 +++++++++++++++
 6 files changed, 339 insertions(+), 7 deletions(-)
 create mode 100644 drivers/gpu/drm/drm_simple_kms_helper.c
 create mode 100644 include/drm/drm_simple_kms_helper.h

--
2.8.2

[PATCH v3 0/2] drm: Add various helpers for simple drivers

[Noralf Trønnes]

This patchset adds various helpers that was originally part of the
tinydrm patchset.

4 patches from the previous version have been applied and 2 are now left.

Essentially it adds 2 functions:
- drm_fb_cma_create_with_funcs()
  CMA backed framebuffer supporting a dirty() callback.
- drm_simple_display_pipe_init()
  Plane, crtc and encoder are collapsed into one entity.


Changes since v2:
- drm: Add helper for simple display pipeline
  - Drop Kconfig knob DRM_KMS_HELPER
  - Expand documentation

Changes since v1:
- Drop patch: drm/panel: Add helper for simple panel connector
- Add fb-helper and fb-cma-helper doc patches
- Add drm/atomic: Don't skip drm_bridge_*() calls if !drm_encoder_helper_funcs
- Add drm_atomic_helper_best_encoder()
- drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()
  - Expand docs
- drm: Add helper for simple display pipeline
  - Add DOC header and add to gpu.tmpl
  - Fix docs: @funcs is optional, "negative error code",
    "This hook is optional."
  - Add checks to drm_simple_kms_plane_atomic_check()

Noralf Trønnes (2):
  drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()
  drm: Add helper for simple display pipeline

 Documentation/DocBook/gpu.tmpl          |   6 +
 drivers/gpu/drm/Makefile                |   2 +-
 drivers/gpu/drm/drm_fb_cma_helper.c     |  31 ++++-
 drivers/gpu/drm/drm_simple_kms_helper.c | 209 ++++++++++++++++++++++++++++++++
 include/drm/drm_fb_cma_helper.h         |   3 +
 include/drm/drm_simple_kms_helper.h     |  95 +++++++++++++++
 6 files changed, 339 insertions(+), 7 deletions(-)
 create mode 100644 drivers/gpu/drm/drm_simple_kms_helper.c
 create mode 100644 include/drm/drm_simple_kms_helper.h

--
2.8.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 1/2] drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()

[Noralf Trønnes]

Add drm_fb_cma_create_with_funcs() for drivers that need to set the
dirty() callback.

Cc: laurent.pinchart@ideasonboard.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---

Changes since v1:
- Expand docs

 drivers/gpu/drm/drm_fb_cma_helper.c | 31 +++++++++++++++++++++++++------
 include/drm/drm_fb_cma_helper.h     |  3 +++
 2 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c
index 3165ac0..ede77c9 100644
--- a/drivers/gpu/drm/drm_fb_cma_helper.c
+++ b/drivers/gpu/drm/drm_fb_cma_helper.c
@@ -159,13 +159,17 @@ static struct drm_fb_cma *drm_fb_cma_alloc(struct drm_device *dev,
 }

 /**
- * drm_fb_cma_create() - (struct drm_mode_config_funcs *)->fb_create callback function
+ * drm_fb_cma_create_with_funcs() - helper function for the
+ *                                  &drm_mode_config_funcs ->fb_create
+ *                                  callback function
  *
- * If your hardware has special alignment or pitch requirements these should be
- * checked before calling this function.
+ * This can be used to set &drm_framebuffer_funcs for drivers that need the
+ * dirty() callback. Use drm_fb_cma_create() if you don't need to change
+ * &drm_framebuffer_funcs.
  */
-struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
-	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
+struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device *dev,
+	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
+	struct drm_framebuffer_funcs *funcs)
 {
 	struct drm_fb_cma *fb_cma;
 	struct drm_gem_cma_object *objs[4];
@@ -202,7 +206,7 @@ struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
 		objs[i] = to_drm_gem_cma_obj(obj);
 	}

-	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, &drm_fb_cma_funcs);
+	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, funcs);
 	if (IS_ERR(fb_cma)) {
 		ret = PTR_ERR(fb_cma);
 		goto err_gem_object_unreference;
@@ -215,6 +219,21 @@ err_gem_object_unreference:
 		drm_gem_object_unreference_unlocked(&objs[i]->base);
 	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(drm_fb_cma_create_with_funcs);
+
+/**
+ * drm_fb_cma_create() - &drm_mode_config_funcs ->fb_create callback function
+ *
+ * If your hardware has special alignment or pitch requirements these should be
+ * checked before calling this function. Use drm_fb_cma_create_with_funcs() if
+ * you need to set &drm_framebuffer_funcs ->dirty.
+ */
+struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
+	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	return drm_fb_cma_create_with_funcs(dev, file_priv, mode_cmd,
+					    &drm_fb_cma_funcs);
+}
 EXPORT_SYMBOL_GPL(drm_fb_cma_create);

 /**
diff --git a/include/drm/drm_fb_cma_helper.h b/include/drm/drm_fb_cma_helper.h
index c6d9c9c..1f9a8bc 100644
--- a/include/drm/drm_fb_cma_helper.h
+++ b/include/drm/drm_fb_cma_helper.h
@@ -31,6 +31,9 @@ void drm_fb_cma_destroy(struct drm_framebuffer *fb);
 int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
 	struct drm_file *file_priv, unsigned int *handle);

+struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device *dev,
+	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
+	struct drm_framebuffer_funcs *funcs);
 struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
 	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd);

--
2.8.2

[PATCH v3 1/2] drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()

[Noralf Trønnes]

Add drm_fb_cma_create_with_funcs() for drivers that need to set the
dirty() callback.

Cc: laurent.pinchart@ideasonboard.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---

Changes since v1:
- Expand docs

 drivers/gpu/drm/drm_fb_cma_helper.c | 31 +++++++++++++++++++++++++------
 include/drm/drm_fb_cma_helper.h     |  3 +++
 2 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c
index 3165ac0..ede77c9 100644
--- a/drivers/gpu/drm/drm_fb_cma_helper.c
+++ b/drivers/gpu/drm/drm_fb_cma_helper.c
@@ -159,13 +159,17 @@ static struct drm_fb_cma *drm_fb_cma_alloc(struct drm_device *dev,
 }

 /**
- * drm_fb_cma_create() - (struct drm_mode_config_funcs *)->fb_create callback function
+ * drm_fb_cma_create_with_funcs() - helper function for the
+ *                                  &drm_mode_config_funcs ->fb_create
+ *                                  callback function
  *
- * If your hardware has special alignment or pitch requirements these should be
- * checked before calling this function.
+ * This can be used to set &drm_framebuffer_funcs for drivers that need the
+ * dirty() callback. Use drm_fb_cma_create() if you don't need to change
+ * &drm_framebuffer_funcs.
  */
-struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
-	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
+struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device *dev,
+	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
+	struct drm_framebuffer_funcs *funcs)
 {
 	struct drm_fb_cma *fb_cma;
 	struct drm_gem_cma_object *objs[4];
@@ -202,7 +206,7 @@ struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
 		objs[i] = to_drm_gem_cma_obj(obj);
 	}

-	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, &drm_fb_cma_funcs);
+	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, funcs);
 	if (IS_ERR(fb_cma)) {
 		ret = PTR_ERR(fb_cma);
 		goto err_gem_object_unreference;
@@ -215,6 +219,21 @@ err_gem_object_unreference:
 		drm_gem_object_unreference_unlocked(&objs[i]->base);
 	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(drm_fb_cma_create_with_funcs);
+
+/**
+ * drm_fb_cma_create() - &drm_mode_config_funcs ->fb_create callback function
+ *
+ * If your hardware has special alignment or pitch requirements these should be
+ * checked before calling this function. Use drm_fb_cma_create_with_funcs() if
+ * you need to set &drm_framebuffer_funcs ->dirty.
+ */
+struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
+	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	return drm_fb_cma_create_with_funcs(dev, file_priv, mode_cmd,
+					    &drm_fb_cma_funcs);
+}
 EXPORT_SYMBOL_GPL(drm_fb_cma_create);

 /**
diff --git a/include/drm/drm_fb_cma_helper.h b/include/drm/drm_fb_cma_helper.h
index c6d9c9c..1f9a8bc 100644
--- a/include/drm/drm_fb_cma_helper.h
+++ b/include/drm/drm_fb_cma_helper.h
@@ -31,6 +31,9 @@ void drm_fb_cma_destroy(struct drm_framebuffer *fb);
 int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
 	struct drm_file *file_priv, unsigned int *handle);

+struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device *dev,
+	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
+	struct drm_framebuffer_funcs *funcs);
 struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
 	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd);

--
2.8.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 2/2] drm: Add helper for simple display pipeline

[Noralf Trønnes]

Provides helper functions for drivers that have a simple display
pipeline. Plane, crtc and encoder are collapsed into one entity.

Cc: jsarha@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---

Changes since v2:
- Drop Kconfig knob DRM_KMS_HELPER
- Expand documentation

Changes since v1:
- Add DOC header and add to gpu.tmpl
- Fix docs: @funcs is optional, "negative error code",
  "This hook is optional."
- Add checks to drm_simple_kms_plane_atomic_check()

 Documentation/DocBook/gpu.tmpl          |   6 +
 drivers/gpu/drm/Makefile                |   2 +-
 drivers/gpu/drm/drm_simple_kms_helper.c | 209 ++++++++++++++++++++++++++++++++
 include/drm/drm_simple_kms_helper.h     |  95 +++++++++++++++
 4 files changed, 311 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/drm_simple_kms_helper.c
 create mode 100644 include/drm/drm_simple_kms_helper.h

diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
index 4a0c599..cf3f5a8 100644
--- a/Documentation/DocBook/gpu.tmpl
+++ b/Documentation/DocBook/gpu.tmpl
@@ -1693,6 +1693,12 @@ void intel_crt_init(struct drm_device *dev)
 !Edrivers/gpu/drm/drm_panel.c
 !Pdrivers/gpu/drm/drm_panel.c drm panel
     </sect2>
+    <sect2>
+      <title>Simple KMS Helper Reference</title>
+!Iinclude/drm/drm_simple_kms_helper.h
+!Edrivers/gpu/drm/drm_simple_kms_helper.c
+!Pdrivers/gpu/drm/drm_simple_kms_helper.c overview
+    </sect2>
   </sect1>

   <!-- Internals: kms properties -->
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 2bd3e5a..31b85df5 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -23,7 +23,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o

 drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
 		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
-		drm_kms_helper_common.o
+		drm_kms_helper_common.o drm_simple_kms_helper.o

 drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
new file mode 100644
index 0000000..74dbada
--- /dev/null
+++ b/drivers/gpu/drm/drm_simple_kms_helper.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2016 Noralf Trønnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <linux/slab.h>
+
+/**
+ * DOC: overview
+ *
+ * This helper library provides helpers for drivers for simple display
+ * hardware.
+ *
+ * drm_simple_display_pipe_init() initializes a simple display pipeline
+ * which has only one full-screen scanout buffer feeding one output. The
+ * pipeline is represented by struct &drm_simple_display_pipe and binds
+ * together &drm_plane, &drm_crtc and &drm_encoder structures into one fixed
+ * entity. Some flexibility for code reuse is provided through a separately
+ * allocated &drm_connector object and supporting optional &drm_bridge
+ * encoder drivers.
+ */
+
+static const struct drm_encoder_funcs drm_simple_kms_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static void drm_simple_kms_crtc_enable(struct drm_crtc *crtc)
+{
+	struct drm_simple_display_pipe *pipe;
+
+	pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
+	if (!pipe->funcs || !pipe->funcs->enable)
+		return;
+
+	pipe->funcs->enable(pipe, crtc->state);
+}
+
+static void drm_simple_kms_crtc_disable(struct drm_crtc *crtc)
+{
+	struct drm_simple_display_pipe *pipe;
+
+	pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
+	if (!pipe->funcs || !pipe->funcs->disable)
+		return;
+
+	pipe->funcs->disable(pipe);
+}
+
+static const struct drm_crtc_helper_funcs drm_simple_kms_crtc_helper_funcs = {
+	.disable = drm_simple_kms_crtc_disable,
+	.enable = drm_simple_kms_crtc_enable,
+};
+
+static const struct drm_crtc_funcs drm_simple_kms_crtc_funcs = {
+	.reset = drm_atomic_helper_crtc_reset,
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static int drm_simple_kms_plane_atomic_check(struct drm_plane *plane,
+					struct drm_plane_state *plane_state)
+{
+	struct drm_rect src = {
+		.x1 = plane_state->src_x,
+		.y1 = plane_state->src_y,
+		.x2 = plane_state->src_x + plane_state->src_w,
+		.y2 = plane_state->src_y + plane_state->src_h,
+	};
+	struct drm_rect dest = {
+		.x1 = plane_state->crtc_x,
+		.y1 = plane_state->crtc_y,
+		.x2 = plane_state->crtc_x + plane_state->crtc_w,
+		.y2 = plane_state->crtc_y + plane_state->crtc_h,
+	};
+	struct drm_rect clip = { 0 };
+	struct drm_simple_display_pipe *pipe;
+	struct drm_crtc_state *crtc_state;
+	bool visible;
+	int ret;
+
+	pipe = container_of(plane, struct drm_simple_display_pipe, plane);
+	crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
+							&pipe->crtc);
+	if (crtc_state->enable != !!plane_state->crtc)
+		return -EINVAL; /* plane must match crtc enable state */
+
+	if (!crtc_state->enable)
+		return 0; /* nothing to check when disabling or disabled */
+
+	clip.x2 = crtc_state->adjusted_mode.hdisplay;
+	clip.y2 = crtc_state->adjusted_mode.vdisplay;
+	ret = drm_plane_helper_check_update(plane, &pipe->crtc,
+					    plane_state->fb,
+					    &src, &dest, &clip,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    false, true, &visible);
+	if (ret)
+		return ret;
+
+	if (!visible)
+		return -EINVAL;
+
+	if (!pipe->funcs || !pipe->funcs->check)
+		return 0;
+
+	return pipe->funcs->check(pipe, plane_state, crtc_state);
+}
+
+static void drm_simple_kms_plane_atomic_update(struct drm_plane *plane,
+					struct drm_plane_state *pstate)
+{
+	struct drm_simple_display_pipe *pipe;
+
+	pipe = container_of(plane, struct drm_simple_display_pipe, plane);
+	if (!pipe->funcs || !pipe->funcs->update)
+		return;
+
+	pipe->funcs->update(pipe, pstate);
+}
+
+static const struct drm_plane_helper_funcs drm_simple_kms_plane_helper_funcs = {
+	.atomic_check = drm_simple_kms_plane_atomic_check,
+	.atomic_update = drm_simple_kms_plane_atomic_update,
+};
+
+static const struct drm_plane_funcs drm_simple_kms_plane_funcs = {
+	.update_plane		= drm_atomic_helper_update_plane,
+	.disable_plane		= drm_atomic_helper_disable_plane,
+	.destroy		= drm_plane_cleanup,
+	.reset			= drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state	= drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
+};
+
+/**
+ * drm_simple_display_pipe_init - Initialize a simple display pipeline
+ * @dev: DRM device
+ * @pipe: simple display pipe object to initialize
+ * @funcs: callbacks for the display pipe (optional)
+ * @formats: array of supported formats (%DRM_FORMAT_*)
+ * @format_count: number of elements in @formats
+ * @connector: connector to attach and register
+ *
+ * Sets up a display pipeline which consist of a really simple
+ * plane-crtc-encoder pipe coupled with the provided connector.
+ * Teardown of a simple display pipe is all handled automatically by the drm
+ * core through calling drm_mode_config_cleanup(). Drivers afterwards need to
+ * release the memory for the structure themselves.
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int drm_simple_display_pipe_init(struct drm_device *dev,
+				 struct drm_simple_display_pipe *pipe,
+				 struct drm_simple_display_pipe_funcs *funcs,
+				 const uint32_t *formats,
+				 unsigned int format_count,
+				 struct drm_connector *connector)
+{
+	struct drm_encoder *encoder = &pipe->encoder;
+	struct drm_plane *plane = &pipe->plane;
+	struct drm_crtc *crtc = &pipe->crtc;
+	int ret;
+
+	pipe->funcs = funcs;
+
+	drm_plane_helper_add(plane, &drm_simple_kms_plane_helper_funcs);
+	ret = drm_universal_plane_init(dev, plane, 0,
+				       &drm_simple_kms_plane_funcs,
+				       formats, format_count,
+				       DRM_PLANE_TYPE_PRIMARY, NULL);
+	if (ret)
+		return ret;
+
+	drm_crtc_helper_add(crtc, &drm_simple_kms_crtc_helper_funcs);
+	ret = drm_crtc_init_with_planes(dev, crtc, plane, NULL,
+					&drm_simple_kms_crtc_funcs, NULL);
+	if (ret)
+		return ret;
+
+	encoder->possible_crtcs = 1 << drm_crtc_index(crtc);
+	ret = drm_encoder_init(dev, encoder, &drm_simple_kms_encoder_funcs,
+			       DRM_MODE_ENCODER_NONE, NULL);
+	if (ret)
+		return ret;
+
+	ret = drm_mode_connector_attach_encoder(connector, encoder);
+	if (ret)
+		return ret;
+
+	return drm_connector_register(connector);
+}
+EXPORT_SYMBOL(drm_simple_display_pipe_init);
+
+MODULE_LICENSE("GPL");
diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
new file mode 100644
index 0000000..01f2e38
--- /dev/null
+++ b/include/drm/drm_simple_kms_helper.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2016 Noralf Trønnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_DRM_SIMPLE_KMS_HELPER_H
+#define __LINUX_DRM_SIMPLE_KMS_HELPER_H
+
+struct drm_simple_display_pipe;
+
+/**
+ * struct drm_simple_display_pipe_funcs - helper operations for a simple
+ *                                        display pipeline
+ */
+struct drm_simple_display_pipe_funcs {
+	/**
+	 * @enable:
+	 *
+	 * This function should be used to enable the pipeline.
+	 * It is called when the underlying crtc is enabled.
+	 * This hook is optional.
+	 */
+	void (*enable)(struct drm_simple_display_pipe *pipe,
+		       struct drm_crtc_state *crtc_state);
+	/**
+	 * @disable:
+	 *
+	 * This function should be used to disable the pipeline.
+	 * It is called when the underlying crtc is disabled.
+	 * This hook is optional.
+	 */
+	void (*disable)(struct drm_simple_display_pipe *pipe);
+
+	/**
+	 * @check:
+	 *
+	 * This function is called in the check phase of an atomic update,
+	 * specifically when the underlying plane is checked.
+	 * The simple display pipeline helpers already check that the plane is
+	 * not scaled, fills the entire visible area and is always enabled
+	 * when the crtc is also enabled.
+	 * This hook is optional.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success, -EINVAL if the state or the transition can't be
+	 * supported, -ENOMEM on memory allocation failure and -EDEADLK if an
+	 * attempt to obtain another state object ran into a &drm_modeset_lock
+	 * deadlock.
+	 */
+	int (*check)(struct drm_simple_display_pipe *pipe,
+		     struct drm_plane_state *plane_state,
+		     struct drm_crtc_state *crtc_state);
+	/**
+	 * @update:
+	 *
+	 * This function is called when the underlying plane state is updated.
+	 * This hook is optional.
+	 */
+	void (*update)(struct drm_simple_display_pipe *pipe,
+		       struct drm_plane_state *plane_state);
+};
+
+/**
+ * struct drm_simple_display_pipe - simple display pipeline
+ * @crtc: CRTC control structure
+ * @plane: Plane control structure
+ * @encoder: Encoder control structure
+ * @connector: Connector control structure
+ * @funcs: Pipeline control functions (optional)
+ *
+ * Simple display pipeline with plane, crtc and encoder collapsed into one
+ * entity. It should be initialized by calling drm_simple_display_pipe_init().
+ */
+struct drm_simple_display_pipe {
+	struct drm_crtc crtc;
+	struct drm_plane plane;
+	struct drm_encoder encoder;
+	struct drm_connector *connector;
+
+	struct drm_simple_display_pipe_funcs *funcs;
+};
+
+int drm_simple_display_pipe_init(struct drm_device *dev,
+				 struct drm_simple_display_pipe *pipe,
+				 struct drm_simple_display_pipe_funcs *funcs,
+				 const uint32_t *formats,
+				 unsigned int format_count,
+				 struct drm_connector *connector);
+
+#endif /* __LINUX_DRM_SIMPLE_KMS_HELPER_H */
--
2.8.2

[PATCH v3 2/2] drm: Add helper for simple display pipeline

[Noralf Trønnes]

Provides helper functions for drivers that have a simple display
pipeline. Plane, crtc and encoder are collapsed into one entity.

Cc: jsarha@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---

Changes since v2:
- Drop Kconfig knob DRM_KMS_HELPER
- Expand documentation

Changes since v1:
- Add DOC header and add to gpu.tmpl
- Fix docs: @funcs is optional, "negative error code",
  "This hook is optional."
- Add checks to drm_simple_kms_plane_atomic_check()

 Documentation/DocBook/gpu.tmpl          |   6 +
 drivers/gpu/drm/Makefile                |   2 +-
 drivers/gpu/drm/drm_simple_kms_helper.c | 209 ++++++++++++++++++++++++++++++++
 include/drm/drm_simple_kms_helper.h     |  95 +++++++++++++++
 4 files changed, 311 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/drm_simple_kms_helper.c
 create mode 100644 include/drm/drm_simple_kms_helper.h

diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
index 4a0c599..cf3f5a8 100644
--- a/Documentation/DocBook/gpu.tmpl
+++ b/Documentation/DocBook/gpu.tmpl
@@ -1693,6 +1693,12 @@ void intel_crt_init(struct drm_device *dev)
 !Edrivers/gpu/drm/drm_panel.c
 !Pdrivers/gpu/drm/drm_panel.c drm panel
     </sect2>
+    <sect2>
+      <title>Simple KMS Helper Reference</title>
+!Iinclude/drm/drm_simple_kms_helper.h
+!Edrivers/gpu/drm/drm_simple_kms_helper.c
+!Pdrivers/gpu/drm/drm_simple_kms_helper.c overview
+    </sect2>
   </sect1>

   <!-- Internals: kms properties -->
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 2bd3e5a..31b85df5 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -23,7 +23,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o

 drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
 		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
-		drm_kms_helper_common.o
+		drm_kms_helper_common.o drm_simple_kms_helper.o

 drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
new file mode 100644
index 0000000..74dbada
--- /dev/null
+++ b/drivers/gpu/drm/drm_simple_kms_helper.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2016 Noralf Trønnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <linux/slab.h>
+
+/**
+ * DOC: overview
+ *
+ * This helper library provides helpers for drivers for simple display
+ * hardware.
+ *
+ * drm_simple_display_pipe_init() initializes a simple display pipeline
+ * which has only one full-screen scanout buffer feeding one output. The
+ * pipeline is represented by struct &drm_simple_display_pipe and binds
+ * together &drm_plane, &drm_crtc and &drm_encoder structures into one fixed
+ * entity. Some flexibility for code reuse is provided through a separately
+ * allocated &drm_connector object and supporting optional &drm_bridge
+ * encoder drivers.
+ */
+
+static const struct drm_encoder_funcs drm_simple_kms_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static void drm_simple_kms_crtc_enable(struct drm_crtc *crtc)
+{
+	struct drm_simple_display_pipe *pipe;
+
+	pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
+	if (!pipe->funcs || !pipe->funcs->enable)
+		return;
+
+	pipe->funcs->enable(pipe, crtc->state);
+}
+
+static void drm_simple_kms_crtc_disable(struct drm_crtc *crtc)
+{
+	struct drm_simple_display_pipe *pipe;
+
+	pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
+	if (!pipe->funcs || !pipe->funcs->disable)
+		return;
+
+	pipe->funcs->disable(pipe);
+}
+
+static const struct drm_crtc_helper_funcs drm_simple_kms_crtc_helper_funcs = {
+	.disable = drm_simple_kms_crtc_disable,
+	.enable = drm_simple_kms_crtc_enable,
+};
+
+static const struct drm_crtc_funcs drm_simple_kms_crtc_funcs = {
+	.reset = drm_atomic_helper_crtc_reset,
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static int drm_simple_kms_plane_atomic_check(struct drm_plane *plane,
+					struct drm_plane_state *plane_state)
+{
+	struct drm_rect src = {
+		.x1 = plane_state->src_x,
+		.y1 = plane_state->src_y,
+		.x2 = plane_state->src_x + plane_state->src_w,
+		.y2 = plane_state->src_y + plane_state->src_h,
+	};
+	struct drm_rect dest = {
+		.x1 = plane_state->crtc_x,
+		.y1 = plane_state->crtc_y,
+		.x2 = plane_state->crtc_x + plane_state->crtc_w,
+		.y2 = plane_state->crtc_y + plane_state->crtc_h,
+	};
+	struct drm_rect clip = { 0 };
+	struct drm_simple_display_pipe *pipe;
+	struct drm_crtc_state *crtc_state;
+	bool visible;
+	int ret;
+
+	pipe = container_of(plane, struct drm_simple_display_pipe, plane);
+	crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
+							&pipe->crtc);
+	if (crtc_state->enable != !!plane_state->crtc)
+		return -EINVAL; /* plane must match crtc enable state */
+
+	if (!crtc_state->enable)
+		return 0; /* nothing to check when disabling or disabled */
+
+	clip.x2 = crtc_state->adjusted_mode.hdisplay;
+	clip.y2 = crtc_state->adjusted_mode.vdisplay;
+	ret = drm_plane_helper_check_update(plane, &pipe->crtc,
+					    plane_state->fb,
+					    &src, &dest, &clip,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    false, true, &visible);
+	if (ret)
+		return ret;
+
+	if (!visible)
+		return -EINVAL;
+
+	if (!pipe->funcs || !pipe->funcs->check)
+		return 0;
+
+	return pipe->funcs->check(pipe, plane_state, crtc_state);
+}
+
+static void drm_simple_kms_plane_atomic_update(struct drm_plane *plane,
+					struct drm_plane_state *pstate)
+{
+	struct drm_simple_display_pipe *pipe;
+
+	pipe = container_of(plane, struct drm_simple_display_pipe, plane);
+	if (!pipe->funcs || !pipe->funcs->update)
+		return;
+
+	pipe->funcs->update(pipe, pstate);
+}
+
+static const struct drm_plane_helper_funcs drm_simple_kms_plane_helper_funcs = {
+	.atomic_check = drm_simple_kms_plane_atomic_check,
+	.atomic_update = drm_simple_kms_plane_atomic_update,
+};
+
+static const struct drm_plane_funcs drm_simple_kms_plane_funcs = {
+	.update_plane		= drm_atomic_helper_update_plane,
+	.disable_plane		= drm_atomic_helper_disable_plane,
+	.destroy		= drm_plane_cleanup,
+	.reset			= drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state	= drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
+};
+
+/**
+ * drm_simple_display_pipe_init - Initialize a simple display pipeline
+ * @dev: DRM device
+ * @pipe: simple display pipe object to initialize
+ * @funcs: callbacks for the display pipe (optional)
+ * @formats: array of supported formats (%DRM_FORMAT_*)
+ * @format_count: number of elements in @formats
+ * @connector: connector to attach and register
+ *
+ * Sets up a display pipeline which consist of a really simple
+ * plane-crtc-encoder pipe coupled with the provided connector.
+ * Teardown of a simple display pipe is all handled automatically by the drm
+ * core through calling drm_mode_config_cleanup(). Drivers afterwards need to
+ * release the memory for the structure themselves.
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int drm_simple_display_pipe_init(struct drm_device *dev,
+				 struct drm_simple_display_pipe *pipe,
+				 struct drm_simple_display_pipe_funcs *funcs,
+				 const uint32_t *formats,
+				 unsigned int format_count,
+				 struct drm_connector *connector)
+{
+	struct drm_encoder *encoder = &pipe->encoder;
+	struct drm_plane *plane = &pipe->plane;
+	struct drm_crtc *crtc = &pipe->crtc;
+	int ret;
+
+	pipe->funcs = funcs;
+
+	drm_plane_helper_add(plane, &drm_simple_kms_plane_helper_funcs);
+	ret = drm_universal_plane_init(dev, plane, 0,
+				       &drm_simple_kms_plane_funcs,
+				       formats, format_count,
+				       DRM_PLANE_TYPE_PRIMARY, NULL);
+	if (ret)
+		return ret;
+
+	drm_crtc_helper_add(crtc, &drm_simple_kms_crtc_helper_funcs);
+	ret = drm_crtc_init_with_planes(dev, crtc, plane, NULL,
+					&drm_simple_kms_crtc_funcs, NULL);
+	if (ret)
+		return ret;
+
+	encoder->possible_crtcs = 1 << drm_crtc_index(crtc);
+	ret = drm_encoder_init(dev, encoder, &drm_simple_kms_encoder_funcs,
+			       DRM_MODE_ENCODER_NONE, NULL);
+	if (ret)
+		return ret;
+
+	ret = drm_mode_connector_attach_encoder(connector, encoder);
+	if (ret)
+		return ret;
+
+	return drm_connector_register(connector);
+}
+EXPORT_SYMBOL(drm_simple_display_pipe_init);
+
+MODULE_LICENSE("GPL");
diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
new file mode 100644
index 0000000..01f2e38
--- /dev/null
+++ b/include/drm/drm_simple_kms_helper.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2016 Noralf Trønnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_DRM_SIMPLE_KMS_HELPER_H
+#define __LINUX_DRM_SIMPLE_KMS_HELPER_H
+
+struct drm_simple_display_pipe;
+
+/**
+ * struct drm_simple_display_pipe_funcs - helper operations for a simple
+ *                                        display pipeline
+ */
+struct drm_simple_display_pipe_funcs {
+	/**
+	 * @enable:
+	 *
+	 * This function should be used to enable the pipeline.
+	 * It is called when the underlying crtc is enabled.
+	 * This hook is optional.
+	 */
+	void (*enable)(struct drm_simple_display_pipe *pipe,
+		       struct drm_crtc_state *crtc_state);
+	/**
+	 * @disable:
+	 *
+	 * This function should be used to disable the pipeline.
+	 * It is called when the underlying crtc is disabled.
+	 * This hook is optional.
+	 */
+	void (*disable)(struct drm_simple_display_pipe *pipe);
+
+	/**
+	 * @check:
+	 *
+	 * This function is called in the check phase of an atomic update,
+	 * specifically when the underlying plane is checked.
+	 * The simple display pipeline helpers already check that the plane is
+	 * not scaled, fills the entire visible area and is always enabled
+	 * when the crtc is also enabled.
+	 * This hook is optional.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success, -EINVAL if the state or the transition can't be
+	 * supported, -ENOMEM on memory allocation failure and -EDEADLK if an
+	 * attempt to obtain another state object ran into a &drm_modeset_lock
+	 * deadlock.
+	 */
+	int (*check)(struct drm_simple_display_pipe *pipe,
+		     struct drm_plane_state *plane_state,
+		     struct drm_crtc_state *crtc_state);
+	/**
+	 * @update:
+	 *
+	 * This function is called when the underlying plane state is updated.
+	 * This hook is optional.
+	 */
+	void (*update)(struct drm_simple_display_pipe *pipe,
+		       struct drm_plane_state *plane_state);
+};
+
+/**
+ * struct drm_simple_display_pipe - simple display pipeline
+ * @crtc: CRTC control structure
+ * @plane: Plane control structure
+ * @encoder: Encoder control structure
+ * @connector: Connector control structure
+ * @funcs: Pipeline control functions (optional)
+ *
+ * Simple display pipeline with plane, crtc and encoder collapsed into one
+ * entity. It should be initialized by calling drm_simple_display_pipe_init().
+ */
+struct drm_simple_display_pipe {
+	struct drm_crtc crtc;
+	struct drm_plane plane;
+	struct drm_encoder encoder;
+	struct drm_connector *connector;
+
+	struct drm_simple_display_pipe_funcs *funcs;
+};
+
+int drm_simple_display_pipe_init(struct drm_device *dev,
+				 struct drm_simple_display_pipe *pipe,
+				 struct drm_simple_display_pipe_funcs *funcs,
+				 const uint32_t *formats,
+				 unsigned int format_count,
+				 struct drm_connector *connector);
+
+#endif /* __LINUX_DRM_SIMPLE_KMS_HELPER_H */
--
2.8.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 1/2] drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()

[Laurent Pinchart]

Hi Noralf,

Thank you for the patch.

On Thursday 12 May 2016 14:53:25 Noralf Trønnes wrote:
> Add drm_fb_cma_create_with_funcs() for drivers that need to set the
> dirty() callback.
> 
> Cc: laurent.pinchart@ideasonboard.com
> Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
> ---
> 
> Changes since v1:
> - Expand docs
> 
>  drivers/gpu/drm/drm_fb_cma_helper.c | 31 +++++++++++++++++++++++++------
>  include/drm/drm_fb_cma_helper.h     |  3 +++
>  2 files changed, 28 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c
> b/drivers/gpu/drm/drm_fb_cma_helper.c index 3165ac0..ede77c9 100644
> --- a/drivers/gpu/drm/drm_fb_cma_helper.c
> +++ b/drivers/gpu/drm/drm_fb_cma_helper.c
> @@ -159,13 +159,17 @@ static struct drm_fb_cma *drm_fb_cma_alloc(struct
> drm_device *dev, }
> 
>  /**
> - * drm_fb_cma_create() - (struct drm_mode_config_funcs *)->fb_create
> callback function
> + * drm_fb_cma_create_with_funcs() - helper function for the
> + *                                  &drm_mode_config_funcs ->fb_create
> + *                                  callback function
>   *
> - * If your hardware has special alignment or pitch requirements these
> should be
> - * checked before calling this function.
> + * This can be used to set &drm_framebuffer_funcs for drivers that need the
> + * dirty() callback. Use drm_fb_cma_create() if you don't need to change +
> * &drm_framebuffer_funcs.
>   */
> -struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
> -	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
> +struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device
> *dev,
> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
> +	struct drm_framebuffer_funcs *funcs)

Shouldn't the funcs argument be const ?

Apart from that,

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>  {
>  	struct drm_fb_cma *fb_cma;
>  	struct drm_gem_cma_object *objs[4];
> @@ -202,7 +206,7 @@ struct drm_framebuffer *drm_fb_cma_create(struct
> drm_device *dev, objs[i] = to_drm_gem_cma_obj(obj);
>  	}
> 
> -	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, &drm_fb_cma_funcs);
> +	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, funcs);
>  	if (IS_ERR(fb_cma)) {
>  		ret = PTR_ERR(fb_cma);
>  		goto err_gem_object_unreference;
> @@ -215,6 +219,21 @@ err_gem_object_unreference:
>  		drm_gem_object_unreference_unlocked(&objs[i]->base);
>  	return ERR_PTR(ret);
>  }
> +EXPORT_SYMBOL_GPL(drm_fb_cma_create_with_funcs);
> +
> +/**
> + * drm_fb_cma_create() - &drm_mode_config_funcs ->fb_create callback
> function
> + *
> + * If your hardware has special alignment or pitch requirements these
> should be
> + * checked before calling this function. Use drm_fb_cma_create_with_funcs()
> if
> + * you need to set &drm_framebuffer_funcs ->dirty.
> + */
> +struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +	return drm_fb_cma_create_with_funcs(dev, file_priv, mode_cmd,
> +					    &drm_fb_cma_funcs);
> +}
>  EXPORT_SYMBOL_GPL(drm_fb_cma_create);
> 
>  /**
> diff --git a/include/drm/drm_fb_cma_helper.h
> b/include/drm/drm_fb_cma_helper.h index c6d9c9c..1f9a8bc 100644
> --- a/include/drm/drm_fb_cma_helper.h
> +++ b/include/drm/drm_fb_cma_helper.h
> @@ -31,6 +31,9 @@ void drm_fb_cma_destroy(struct drm_framebuffer *fb);
>  int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
>  	struct drm_file *file_priv, unsigned int *handle);
> 
> +struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device
> *dev,
> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
> +	struct drm_framebuffer_funcs *funcs);
>  struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
>  	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd);

-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 1/2] drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()

[Laurent Pinchart]

Hi Noralf,

Thank you for the patch.

On Thursday 12 May 2016 14:53:25 Noralf Trønnes wrote:
> Add drm_fb_cma_create_with_funcs() for drivers that need to set the
> dirty() callback.
> 
> Cc: laurent.pinchart@ideasonboard.com
> Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
> ---
> 
> Changes since v1:
> - Expand docs
> 
>  drivers/gpu/drm/drm_fb_cma_helper.c | 31 +++++++++++++++++++++++++------
>  include/drm/drm_fb_cma_helper.h     |  3 +++
>  2 files changed, 28 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c
> b/drivers/gpu/drm/drm_fb_cma_helper.c index 3165ac0..ede77c9 100644
> --- a/drivers/gpu/drm/drm_fb_cma_helper.c
> +++ b/drivers/gpu/drm/drm_fb_cma_helper.c
> @@ -159,13 +159,17 @@ static struct drm_fb_cma *drm_fb_cma_alloc(struct
> drm_device *dev, }
> 
>  /**
> - * drm_fb_cma_create() - (struct drm_mode_config_funcs *)->fb_create
> callback function
> + * drm_fb_cma_create_with_funcs() - helper function for the
> + *                                  &drm_mode_config_funcs ->fb_create
> + *                                  callback function
>   *
> - * If your hardware has special alignment or pitch requirements these
> should be
> - * checked before calling this function.
> + * This can be used to set &drm_framebuffer_funcs for drivers that need the
> + * dirty() callback. Use drm_fb_cma_create() if you don't need to change +
> * &drm_framebuffer_funcs.
>   */
> -struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
> -	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
> +struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device
> *dev,
> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
> +	struct drm_framebuffer_funcs *funcs)

Shouldn't the funcs argument be const ?

Apart from that,

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>  {
>  	struct drm_fb_cma *fb_cma;
>  	struct drm_gem_cma_object *objs[4];
> @@ -202,7 +206,7 @@ struct drm_framebuffer *drm_fb_cma_create(struct
> drm_device *dev, objs[i] = to_drm_gem_cma_obj(obj);
>  	}
> 
> -	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, &drm_fb_cma_funcs);
> +	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, funcs);
>  	if (IS_ERR(fb_cma)) {
>  		ret = PTR_ERR(fb_cma);
>  		goto err_gem_object_unreference;
> @@ -215,6 +219,21 @@ err_gem_object_unreference:
>  		drm_gem_object_unreference_unlocked(&objs[i]->base);
>  	return ERR_PTR(ret);
>  }
> +EXPORT_SYMBOL_GPL(drm_fb_cma_create_with_funcs);
> +
> +/**
> + * drm_fb_cma_create() - &drm_mode_config_funcs ->fb_create callback
> function
> + *
> + * If your hardware has special alignment or pitch requirements these
> should be
> + * checked before calling this function. Use drm_fb_cma_create_with_funcs()
> if
> + * you need to set &drm_framebuffer_funcs ->dirty.
> + */
> +struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +	return drm_fb_cma_create_with_funcs(dev, file_priv, mode_cmd,
> +					    &drm_fb_cma_funcs);
> +}
>  EXPORT_SYMBOL_GPL(drm_fb_cma_create);
> 
>  /**
> diff --git a/include/drm/drm_fb_cma_helper.h
> b/include/drm/drm_fb_cma_helper.h index c6d9c9c..1f9a8bc 100644
> --- a/include/drm/drm_fb_cma_helper.h
> +++ b/include/drm/drm_fb_cma_helper.h
> @@ -31,6 +31,9 @@ void drm_fb_cma_destroy(struct drm_framebuffer *fb);
>  int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
>  	struct drm_file *file_priv, unsigned int *handle);
> 
> +struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device
> *dev,
> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
> +	struct drm_framebuffer_funcs *funcs);
>  struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
>  	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd);

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 1/2] drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()

[Noralf Trønnes]

Den 12.05.2016 15:47, skrev Laurent Pinchart:
> Hi Noralf,
>
> Thank you for the patch.
>
> On Thursday 12 May 2016 14:53:25 Noralf Trønnes wrote:
>> Add drm_fb_cma_create_with_funcs() for drivers that need to set the
>> dirty() callback.
>>
>> Cc: laurent.pinchart@ideasonboard.com
>> Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
>> ---
>>
>> Changes since v1:
>> - Expand docs
>>
>>   drivers/gpu/drm/drm_fb_cma_helper.c | 31 +++++++++++++++++++++++++------
>>   include/drm/drm_fb_cma_helper.h     |  3 +++
>>   2 files changed, 28 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c
>> b/drivers/gpu/drm/drm_fb_cma_helper.c index 3165ac0..ede77c9 100644
>> --- a/drivers/gpu/drm/drm_fb_cma_helper.c
>> +++ b/drivers/gpu/drm/drm_fb_cma_helper.c
>> @@ -159,13 +159,17 @@ static struct drm_fb_cma *drm_fb_cma_alloc(struct
>> drm_device *dev, }
>>
>>   /**
>> - * drm_fb_cma_create() - (struct drm_mode_config_funcs *)->fb_create
>> callback function
>> + * drm_fb_cma_create_with_funcs() - helper function for the
>> + *                                  &drm_mode_config_funcs ->fb_create
>> + *                                  callback function
>>    *
>> - * If your hardware has special alignment or pitch requirements these
>> should be
>> - * checked before calling this function.
>> + * This can be used to set &drm_framebuffer_funcs for drivers that need the
>> + * dirty() callback. Use drm_fb_cma_create() if you don't need to change +
>> * &drm_framebuffer_funcs.
>>    */
>> -struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
>> -	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
>> +struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device
>> *dev,
>> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
>> +	struct drm_framebuffer_funcs *funcs)
> Shouldn't the funcs argument be const ?

Yes you're right, drm_framebuffer_init() uses const.
I missed this in my previous patch as well, so I need to fix up
drm_fb_cma_alloc() and drm_fbdev_cma_create_with_funcs() as well.

Thanks.

Noralf.

> Apart from that,
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
>>   {
>>   	struct drm_fb_cma *fb_cma;
>>   	struct drm_gem_cma_object *objs[4];
>> @@ -202,7 +206,7 @@ struct drm_framebuffer *drm_fb_cma_create(struct
>> drm_device *dev, objs[i] = to_drm_gem_cma_obj(obj);
>>   	}
>>
>> -	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, &drm_fb_cma_funcs);
>> +	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, funcs);
>>   	if (IS_ERR(fb_cma)) {
>>   		ret = PTR_ERR(fb_cma);
>>   		goto err_gem_object_unreference;
>> @@ -215,6 +219,21 @@ err_gem_object_unreference:
>>   		drm_gem_object_unreference_unlocked(&objs[i]->base);
>>   	return ERR_PTR(ret);
>>   }
>> +EXPORT_SYMBOL_GPL(drm_fb_cma_create_with_funcs);
>> +
>> +/**
>> + * drm_fb_cma_create() - &drm_mode_config_funcs ->fb_create callback
>> function
>> + *
>> + * If your hardware has special alignment or pitch requirements these
>> should be
>> + * checked before calling this function. Use drm_fb_cma_create_with_funcs()
>> if
>> + * you need to set &drm_framebuffer_funcs ->dirty.
>> + */
>> +struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
>> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
>> +{
>> +	return drm_fb_cma_create_with_funcs(dev, file_priv, mode_cmd,
>> +					    &drm_fb_cma_funcs);
>> +}
>>   EXPORT_SYMBOL_GPL(drm_fb_cma_create);
>>
>>   /**
>> diff --git a/include/drm/drm_fb_cma_helper.h
>> b/include/drm/drm_fb_cma_helper.h index c6d9c9c..1f9a8bc 100644
>> --- a/include/drm/drm_fb_cma_helper.h
>> +++ b/include/drm/drm_fb_cma_helper.h
>> @@ -31,6 +31,9 @@ void drm_fb_cma_destroy(struct drm_framebuffer *fb);
>>   int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
>>   	struct drm_file *file_priv, unsigned int *handle);
>>
>> +struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device
>> *dev,
>> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
>> +	struct drm_framebuffer_funcs *funcs);
>>   struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
>>   	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd);

Re: [PATCH v3 1/2] drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()

[Noralf Trønnes]

Den 12.05.2016 15:47, skrev Laurent Pinchart:
> Hi Noralf,
>
> Thank you for the patch.
>
> On Thursday 12 May 2016 14:53:25 Noralf Trønnes wrote:
>> Add drm_fb_cma_create_with_funcs() for drivers that need to set the
>> dirty() callback.
>>
>> Cc: laurent.pinchart@ideasonboard.com
>> Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
>> ---
>>
>> Changes since v1:
>> - Expand docs
>>
>>   drivers/gpu/drm/drm_fb_cma_helper.c | 31 +++++++++++++++++++++++++------
>>   include/drm/drm_fb_cma_helper.h     |  3 +++
>>   2 files changed, 28 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c
>> b/drivers/gpu/drm/drm_fb_cma_helper.c index 3165ac0..ede77c9 100644
>> --- a/drivers/gpu/drm/drm_fb_cma_helper.c
>> +++ b/drivers/gpu/drm/drm_fb_cma_helper.c
>> @@ -159,13 +159,17 @@ static struct drm_fb_cma *drm_fb_cma_alloc(struct
>> drm_device *dev, }
>>
>>   /**
>> - * drm_fb_cma_create() - (struct drm_mode_config_funcs *)->fb_create
>> callback function
>> + * drm_fb_cma_create_with_funcs() - helper function for the
>> + *                                  &drm_mode_config_funcs ->fb_create
>> + *                                  callback function
>>    *
>> - * If your hardware has special alignment or pitch requirements these
>> should be
>> - * checked before calling this function.
>> + * This can be used to set &drm_framebuffer_funcs for drivers that need the
>> + * dirty() callback. Use drm_fb_cma_create() if you don't need to change +
>> * &drm_framebuffer_funcs.
>>    */
>> -struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
>> -	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
>> +struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device
>> *dev,
>> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
>> +	struct drm_framebuffer_funcs *funcs)
> Shouldn't the funcs argument be const ?

Yes you're right, drm_framebuffer_init() uses const.
I missed this in my previous patch as well, so I need to fix up
drm_fb_cma_alloc() and drm_fbdev_cma_create_with_funcs() as well.

Thanks.

Noralf.

> Apart from that,
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
>>   {
>>   	struct drm_fb_cma *fb_cma;
>>   	struct drm_gem_cma_object *objs[4];
>> @@ -202,7 +206,7 @@ struct drm_framebuffer *drm_fb_cma_create(struct
>> drm_device *dev, objs[i] = to_drm_gem_cma_obj(obj);
>>   	}
>>
>> -	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, &drm_fb_cma_funcs);
>> +	fb_cma = drm_fb_cma_alloc(dev, mode_cmd, objs, i, funcs);
>>   	if (IS_ERR(fb_cma)) {
>>   		ret = PTR_ERR(fb_cma);
>>   		goto err_gem_object_unreference;
>> @@ -215,6 +219,21 @@ err_gem_object_unreference:
>>   		drm_gem_object_unreference_unlocked(&objs[i]->base);
>>   	return ERR_PTR(ret);
>>   }
>> +EXPORT_SYMBOL_GPL(drm_fb_cma_create_with_funcs);
>> +
>> +/**
>> + * drm_fb_cma_create() - &drm_mode_config_funcs ->fb_create callback
>> function
>> + *
>> + * If your hardware has special alignment or pitch requirements these
>> should be
>> + * checked before calling this function. Use drm_fb_cma_create_with_funcs()
>> if
>> + * you need to set &drm_framebuffer_funcs ->dirty.
>> + */
>> +struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
>> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
>> +{
>> +	return drm_fb_cma_create_with_funcs(dev, file_priv, mode_cmd,
>> +					    &drm_fb_cma_funcs);
>> +}
>>   EXPORT_SYMBOL_GPL(drm_fb_cma_create);
>>
>>   /**
>> diff --git a/include/drm/drm_fb_cma_helper.h
>> b/include/drm/drm_fb_cma_helper.h index c6d9c9c..1f9a8bc 100644
>> --- a/include/drm/drm_fb_cma_helper.h
>> +++ b/include/drm/drm_fb_cma_helper.h
>> @@ -31,6 +31,9 @@ void drm_fb_cma_destroy(struct drm_framebuffer *fb);
>>   int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
>>   	struct drm_file *file_priv, unsigned int *handle);
>>
>> +struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device
>> *dev,
>> +	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
>> +	struct drm_framebuffer_funcs *funcs);
>>   struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev,
>>   	struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd);

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 2/2] drm: Add helper for simple display pipeline

[Daniel Vetter]

On Thu, May 12, 2016 at 02:53:26PM +0200, Noralf Trønnes wrote:
> +/**
> + * struct drm_simple_display_pipe - simple display pipeline
> + * @crtc: CRTC control structure
> + * @plane: Plane control structure
> + * @encoder: Encoder control structure
> + * @connector: Connector control structure
> + * @funcs: Pipeline control functions (optional)
> + *
> + * Simple display pipeline with plane, crtc and encoder collapsed into one
> + * entity. It should be initialized by calling drm_simple_display_pipe_init().
> + */
> +struct drm_simple_display_pipe {
> +	struct drm_crtc crtc;
> +	struct drm_plane plane;
> +	struct drm_encoder encoder;
> +	struct drm_connector *connector;
> +
> +	struct drm_simple_display_pipe_funcs *funcs;
> +};

Same thing as in the previous patch: Function table pointers should be
const. I totally forgot about this.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Re: [PATCH v3 2/2] drm: Add helper for simple display pipeline

[Daniel Vetter]

On Thu, May 12, 2016 at 02:53:26PM +0200, Noralf Trønnes wrote:
> +/**
> + * struct drm_simple_display_pipe - simple display pipeline
> + * @crtc: CRTC control structure
> + * @plane: Plane control structure
> + * @encoder: Encoder control structure
> + * @connector: Connector control structure
> + * @funcs: Pipeline control functions (optional)
> + *
> + * Simple display pipeline with plane, crtc and encoder collapsed into one
> + * entity. It should be initialized by calling drm_simple_display_pipe_init().
> + */
> +struct drm_simple_display_pipe {
> +	struct drm_crtc crtc;
> +	struct drm_plane plane;
> +	struct drm_encoder encoder;
> +	struct drm_connector *connector;
> +
> +	struct drm_simple_display_pipe_funcs *funcs;
> +};

Same thing as in the previous patch: Function table pointers should be
const. I totally forgot about this.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel