* [U-Boot] [PATCH v2 0/3] ARM: DRA7xx: Enable FIT
@ 2016-05-16 5:21 Lokesh Vutla
2016-05-16 5:21 ` [U-Boot] [PATCH v2 1/3] board: dra7: fit: add support for selecting dtb dynamically Lokesh Vutla
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Lokesh Vutla @ 2016-05-16 5:21 UTC (permalink / raw)
To: u-boot
This series enables FIT for DRA7xx platforms.
Depends on the FIT support series posted recently.
Link to v1: https://www.mail-archive.com/u-boot at lists.denx.de/msg211963.html
Lokesh Vutla (3):
board: dra7: fit: add support for selecting dtb dynamically
ARM: DRA7: Enable FIT
ARM: DRA7: configs: Remove obsolete configs
board/ti/dra7xx/MAINTAINERS | 5 +---
board/ti/dra7xx/evm.c | 12 ++++++++
configs/dra72_evm_defconfig | 53 -----------------------------------
configs/dra74_evm_defconfig | 52 ----------------------------------
configs/dra7xx_evm_defconfig | 15 +++++++++-
configs/dra7xx_evm_qspiboot_defconfig | 43 ----------------------------
configs/dra7xx_evm_uart3_defconfig | 44 -----------------------------
7 files changed, 27 insertions(+), 197 deletions(-)
delete mode 100644 configs/dra72_evm_defconfig
delete mode 100644 configs/dra74_evm_defconfig
delete mode 100644 configs/dra7xx_evm_qspiboot_defconfig
delete mode 100644 configs/dra7xx_evm_uart3_defconfig
--
2.8.2
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/3] board: dra7: fit: add support for selecting dtb dynamically
2016-05-16 5:21 [U-Boot] [PATCH v2 0/3] ARM: DRA7xx: Enable FIT Lokesh Vutla
@ 2016-05-16 5:21 ` Lokesh Vutla
2016-05-30 18:03 ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-05-16 5:21 ` [U-Boot] [PATCH v2 2/3] ARM: DRA7: Enable FIT Lokesh Vutla
2016-05-16 5:21 ` [U-Boot] [PATCH v2 3/3] ARM: DRA7: configs: Remove obsolete configs Lokesh Vutla
2 siblings, 1 reply; 8+ messages in thread
From: Lokesh Vutla @ 2016-05-16 5:21 UTC (permalink / raw)
To: u-boot
FIT allows for a multiple dtb in a single image. SPL needs a way to
detect the right dtb to be used. Adding support for the same.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
-Changes since v1:
None
board/ti/dra7xx/evm.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 9bd71d8..5122c3a 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -718,3 +718,15 @@ int board_early_init_f(void)
return 0;
}
#endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ if (is_dra72x() && !strcmp(name, "dra72-evm"))
+ return 0;
+ else if (!is_dra72x() && !strcmp(name, "dra7-evm"))
+ return 0;
+ else
+ return -1;
+}
+#endif
--
2.8.2
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 2/3] ARM: DRA7: Enable FIT
2016-05-16 5:21 [U-Boot] [PATCH v2 0/3] ARM: DRA7xx: Enable FIT Lokesh Vutla
2016-05-16 5:21 ` [U-Boot] [PATCH v2 1/3] board: dra7: fit: add support for selecting dtb dynamically Lokesh Vutla
@ 2016-05-16 5:21 ` Lokesh Vutla
2016-05-17 0:41 ` Tom Rini
2016-05-30 18:03 ` [U-Boot] [U-Boot,v2,2/3] " Tom Rini
2016-05-16 5:21 ` [U-Boot] [PATCH v2 3/3] ARM: DRA7: configs: Remove obsolete configs Lokesh Vutla
2 siblings, 2 replies; 8+ messages in thread
From: Lokesh Vutla @ 2016-05-16 5:21 UTC (permalink / raw)
To: u-boot
Use a single defconfig for all DRA7 platforms by enabling FIT and delete
the platform specific defconfigs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
Changes since v1:
- Removed dra7xx_evm_nodt_defconfig
board/ti/dra7xx/MAINTAINERS | 3 +--
configs/dra72_evm_defconfig | 53 --------------------------------------------
configs/dra74_evm_defconfig | 52 -------------------------------------------
configs/dra7xx_evm_defconfig | 15 ++++++++++++-
4 files changed, 15 insertions(+), 108 deletions(-)
delete mode 100644 configs/dra72_evm_defconfig
delete mode 100644 configs/dra74_evm_defconfig
diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS
index 3f638d0..d6efe26 100644
--- a/board/ti/dra7xx/MAINTAINERS
+++ b/board/ti/dra7xx/MAINTAINERS
@@ -3,8 +3,7 @@ M: Lokesh Vutla <lokeshvutla@ti.com>
S: Maintained
F: board/ti/dra7xx/
F: include/configs/dra7xx_evm.h
-F: configs/dra72_evm_defconfig
-F: configs/dra74_evm_defconfig
F: configs/dra7xx_evm_defconfig
+F: configs/dra7xx_evm_nodt_defconfig
F: configs/dra7xx_evm_qspiboot_defconfig
F: configs/dra7xx_evm_uart3_defconfig
diff --git a/configs/dra72_evm_defconfig b/configs/dra72_evm_defconfig
deleted file mode 100644
index 00c6ac3..0000000
--- a/configs/dra72_evm_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP54XX=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_DRA7XX_EVM=y
-CONFIG_DM_SERIAL=y
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_DEFAULT_DEVICE_TREE="dra72-evm"
-CONFIG_SPL=y
-CONFIG_SPL_STACK_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_DM=y
-CONFIG_DM_MMC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SYS_NS16550=y
-CONFIG_TI_QSPI=y
-CONFIG_TIMER=y
-CONFIG_OMAP_TIMER=y
-CONFIG_USB=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
diff --git a/configs/dra74_evm_defconfig b/configs/dra74_evm_defconfig
deleted file mode 100644
index a11dcd5..0000000
--- a/configs/dra74_evm_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP54XX=y
-CONFIG_TARGET_DRA7XX_EVM=y
-CONFIG_DM_SERIAL=y
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
-CONFIG_SPL=y
-CONFIG_SPL_STACK_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_DM=y
-CONFIG_DM_MMC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SYS_NS16550=y
-CONFIG_TI_QSPI=y
-CONFIG_TIMER=y
-CONFIG_OMAP_TIMER=y
-CONFIG_USB=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index b6458ae..c856eb7 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -1,7 +1,12 @@
CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DM_GPIO=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_HUSH_PARSER=y
@@ -25,11 +30,16 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_MMC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SYS_NS16550=y
CONFIG_TI_QSPI=y
+CONFIG_TIMER=y
+CONFIG_OMAP_TIMER=y
CONFIG_USB=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
@@ -40,4 +50,7 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_SPL_OF_LIBFDT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_LIST="dra7-evm dra72-evm"
--
2.8.2
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 3/3] ARM: DRA7: configs: Remove obsolete configs
2016-05-16 5:21 [U-Boot] [PATCH v2 0/3] ARM: DRA7xx: Enable FIT Lokesh Vutla
2016-05-16 5:21 ` [U-Boot] [PATCH v2 1/3] board: dra7: fit: add support for selecting dtb dynamically Lokesh Vutla
2016-05-16 5:21 ` [U-Boot] [PATCH v2 2/3] ARM: DRA7: Enable FIT Lokesh Vutla
@ 2016-05-16 5:21 ` Lokesh Vutla
2016-05-30 18:03 ` [U-Boot] [U-Boot, v2, " Tom Rini
2 siblings, 1 reply; 8+ messages in thread
From: Lokesh Vutla @ 2016-05-16 5:21 UTC (permalink / raw)
To: u-boot
Removing:
uart3_defconfig:
Now uart3 can be selected using menuconfig, removing separate
config for uart mode. Doing uart boot is not straight forward as ROM uses
uart3 as default serial console. In order to boot to prompt, concole in both
u-boot and kernel needs to be changed.
qspiboot_defconfig:
The only advantage of enabling QSPI_BOOT is selecting env in QSPI.
Eventually env needs to be selected by menuconfig so removing
qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
Changes since v1:
- None
board/ti/dra7xx/MAINTAINERS | 2 --
configs/dra7xx_evm_qspiboot_defconfig | 43 ----------------------------------
configs/dra7xx_evm_uart3_defconfig | 44 -----------------------------------
3 files changed, 89 deletions(-)
delete mode 100644 configs/dra7xx_evm_qspiboot_defconfig
delete mode 100644 configs/dra7xx_evm_uart3_defconfig
diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS
index d6efe26..edfbdb7 100644
--- a/board/ti/dra7xx/MAINTAINERS
+++ b/board/ti/dra7xx/MAINTAINERS
@@ -5,5 +5,3 @@ F: board/ti/dra7xx/
F: include/configs/dra7xx_evm.h
F: configs/dra7xx_evm_defconfig
F: configs/dra7xx_evm_nodt_defconfig
-F: configs/dra7xx_evm_qspiboot_defconfig
-F: configs/dra7xx_evm_uart3_defconfig
diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig
deleted file mode 100644
index 8ebfe49..0000000
--- a/configs/dra7xx_evm_qspiboot_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP54XX=y
-CONFIG_TARGET_DRA7XX_EVM=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SYS_NS16550=y
-CONFIG_TI_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_OF_LIBFDT=y
diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig
deleted file mode 100644
index 54c7ba9..0000000
--- a/configs/dra7xx_evm_uart3_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP54XX=y
-CONFIG_TARGET_DRA7XX_EVM=y
-CONFIG_CONS_INDEX=3
-CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SYS_NS16550=y
-CONFIG_TI_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_OF_LIBFDT=y
--
2.8.2
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 2/3] ARM: DRA7: Enable FIT
2016-05-16 5:21 ` [U-Boot] [PATCH v2 2/3] ARM: DRA7: Enable FIT Lokesh Vutla
@ 2016-05-17 0:41 ` Tom Rini
2016-05-30 18:03 ` [U-Boot] [U-Boot,v2,2/3] " Tom Rini
1 sibling, 0 replies; 8+ messages in thread
From: Tom Rini @ 2016-05-17 0:41 UTC (permalink / raw)
To: u-boot
On Mon, May 16, 2016 at 10:51:24AM +0530, Lokesh Vutla wrote:
> Use a single defconfig for all DRA7 platforms by enabling FIT and delete
> the platform specific defconfigs.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160516/b0d1ab4e/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [U-Boot, v2, 1/3] board: dra7: fit: add support for selecting dtb dynamically
2016-05-16 5:21 ` [U-Boot] [PATCH v2 1/3] board: dra7: fit: add support for selecting dtb dynamically Lokesh Vutla
@ 2016-05-30 18:03 ` Tom Rini
0 siblings, 0 replies; 8+ messages in thread
From: Tom Rini @ 2016-05-30 18:03 UTC (permalink / raw)
To: u-boot
On Mon, May 16, 2016 at 10:51:23AM +0530, Lokesh Vutla wrote:
> FIT allows for a multiple dtb in a single image. SPL needs a way to
> detect the right dtb to be used. Adding support for the same.
>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160530/961ed7ee/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [U-Boot,v2,2/3] ARM: DRA7: Enable FIT
2016-05-16 5:21 ` [U-Boot] [PATCH v2 2/3] ARM: DRA7: Enable FIT Lokesh Vutla
2016-05-17 0:41 ` Tom Rini
@ 2016-05-30 18:03 ` Tom Rini
1 sibling, 0 replies; 8+ messages in thread
From: Tom Rini @ 2016-05-30 18:03 UTC (permalink / raw)
To: u-boot
On Mon, May 16, 2016 at 10:51:24AM +0530, Lokesh Vutla wrote:
> Use a single defconfig for all DRA7 platforms by enabling FIT and delete
> the platform specific defconfigs.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160530/8a68e8c1/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [U-Boot, v2, 3/3] ARM: DRA7: configs: Remove obsolete configs
2016-05-16 5:21 ` [U-Boot] [PATCH v2 3/3] ARM: DRA7: configs: Remove obsolete configs Lokesh Vutla
@ 2016-05-30 18:03 ` Tom Rini
0 siblings, 0 replies; 8+ messages in thread
From: Tom Rini @ 2016-05-30 18:03 UTC (permalink / raw)
To: u-boot
On Mon, May 16, 2016 at 10:51:25AM +0530, Lokesh Vutla wrote:
> Removing:
> uart3_defconfig:
> Now uart3 can be selected using menuconfig, removing separate
> config for uart mode. Doing uart boot is not straight forward as ROM uses
> uart3 as default serial console. In order to boot to prompt, concole in both
> u-boot and kernel needs to be changed.
>
> qspiboot_defconfig:
> The only advantage of enabling QSPI_BOOT is selecting env in QSPI.
> Eventually env needs to be selected by menuconfig so removing
> qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig.
>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160530/e29a2597/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-05-30 18:03 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-16 5:21 [U-Boot] [PATCH v2 0/3] ARM: DRA7xx: Enable FIT Lokesh Vutla
2016-05-16 5:21 ` [U-Boot] [PATCH v2 1/3] board: dra7: fit: add support for selecting dtb dynamically Lokesh Vutla
2016-05-30 18:03 ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-05-16 5:21 ` [U-Boot] [PATCH v2 2/3] ARM: DRA7: Enable FIT Lokesh Vutla
2016-05-17 0:41 ` Tom Rini
2016-05-30 18:03 ` [U-Boot] [U-Boot,v2,2/3] " Tom Rini
2016-05-16 5:21 ` [U-Boot] [PATCH v2 3/3] ARM: DRA7: configs: Remove obsolete configs Lokesh Vutla
2016-05-30 18:03 ` [U-Boot] [U-Boot, v2, " Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.