[U-Boot] [PATCH v3 0/5] Malta UART using device model & device tree

[U-Boot] [PATCH v3 0/5] Malta UART using device model & device tree

[Paul Burton]

This series converts the MIPS Malta development board to make use of
device model & device tree to probe the UART. This results in a tidier
way to handle differences between Malta boards & starts Malta on the
path to device model conversion.

Paul Burton (5):
  fdt: Support for ISA busses
  fdt: Document the rest of struct of_bus
  dm: ns16550: Don't map_physmem for I/O ports
  malta: Tidy up UART address selection
  malta: Use device model & tree for UART

 arch/mips/Kconfig           |   4 ++
 arch/mips/dts/Makefile      |   1 +
 arch/mips/dts/mti,malta.dts |  32 ++++++++++++
 board/imgtec/malta/malta.c  |  13 -----
 common/fdt_support.c        | 120 ++++++++++++++++++++++++++++++++++++++++++--
 configs/malta_defconfig     |   2 +
 configs/maltael_defconfig   |   2 +
 drivers/core/Kconfig        |  23 +++++++++
 drivers/serial/ns16550.c    |   8 +++
 include/configs/malta.h     |   8 +--
 10 files changed, 190 insertions(+), 23 deletions(-)
 create mode 100644 arch/mips/dts/mti,malta.dts

-- 
2.8.2

[U-Boot] [PATCH v3 1/5] fdt: Support for ISA busses

[Paul Burton]

Support ISA busses in much the same way as Linux does. This allows for
ISA bus addresses to be translated, and only if CONFIG_OF_ISA_BUS is
selected in order to avoid including the code in builds which won't need
it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---

Changes in v3: None
Changes in v2:
- Document the match function pointer in struct of_bus.
- Make CONFIG_OF_ISA_BUS not user-selectable, and explain it in help text.
- assert() that of_match_bus didn't fail instead of BUG(), and comment why.
- s/&of_busses[0]/of_busses/

 common/fdt_support.c | 101 +++++++++++++++++++++++++++++++++++++++++++++++++--
 drivers/core/Kconfig |  23 ++++++++++++
 2 files changed, 121 insertions(+), 3 deletions(-)

diff --git a/common/fdt_support.c b/common/fdt_support.c
index 42e5d8a..96b5d0a 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -964,10 +964,21 @@ static void of_dump_addr(const char *s, const fdt32_t *addr, int na)
 static void of_dump_addr(const char *s, const fdt32_t *addr, int na) { }
 #endif
 
-/* Callbacks for bus specific translators */
+/**
+ * struct of_bus - Callbacks for bus specific translators
+ * @match:	Return non-zero if the node whose parent is at
+ *		parentoffset in the FDT blob corresponds to a bus
+ *		of this type, otherwise return zero. If NULL a match
+ *		is assumed.
+ *
+ * Each bus type will include a struct of_bus in the of_busses array,
+ * providing implementations of some or all of the functions used to
+ * match the bus & handle address translation for its children.
+ */
 struct of_bus {
 	const char	*name;
 	const char	*addresses;
+	int		(*match)(void *blob, int parentoffset);
 	void		(*count_cells)(void *blob, int parentoffset,
 				int *addrc, int *sizec);
 	u64		(*map)(fdt32_t *addr, const fdt32_t *range,
@@ -1022,8 +1033,70 @@ static int of_bus_default_translate(fdt32_t *addr, u64 offset, int na)
 	return 0;
 }
 
+#ifdef CONFIG_OF_ISA_BUS
+
+/* ISA bus translator */
+static int of_bus_isa_match(void *blob, int parentoffset)
+{
+	const char *name;
+
+	name = fdt_get_name(blob, parentoffset, NULL);
+	if (!name)
+		return 0;
+
+	return !strcmp(name, "isa");
+}
+
+static void of_bus_isa_count_cells(void *blob, int parentoffset,
+				   int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = 2;
+	if (sizec)
+		*sizec = 1;
+}
+
+static u64 of_bus_isa_map(fdt32_t *addr, const fdt32_t *range,
+			  int na, int ns, int pna)
+{
+	u64 cp, s, da;
+
+	/* Check address type match */
+	if ((addr[0] ^ range[0]) & cpu_to_be32(1))
+		return OF_BAD_ADDR;
+
+	cp = of_read_number(range + 1, na - 1);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr + 1, na - 1);
+
+	debug("OF: ISA map, cp=%" PRIu64 ", s=%" PRIu64
+	      ", da=%" PRIu64 "\n", cp, s, da);
+
+	if (da < cp || da >= (cp + s))
+		return OF_BAD_ADDR;
+	return da - cp;
+}
+
+static int of_bus_isa_translate(fdt32_t *addr, u64 offset, int na)
+{
+	return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+#endif /* CONFIG_OF_ISA_BUS */
+
 /* Array of bus specific translators */
 static struct of_bus of_busses[] = {
+#ifdef CONFIG_OF_ISA_BUS
+	/* ISA */
+	{
+		.name = "isa",
+		.addresses = "reg",
+		.match = of_bus_isa_match,
+		.count_cells = of_bus_isa_count_cells,
+		.map = of_bus_isa_map,
+		.translate = of_bus_isa_translate,
+	},
+#endif /* CONFIG_OF_ISA_BUS */
 	/* Default */
 	{
 		.name = "default",
@@ -1034,6 +1107,28 @@ static struct of_bus of_busses[] = {
 	},
 };
 
+static struct of_bus *of_match_bus(void *blob, int parentoffset)
+{
+	struct of_bus *bus;
+
+	if (ARRAY_SIZE(of_busses) == 1)
+		return of_busses;
+
+	for (bus = of_busses; bus; bus++) {
+		if (!bus->match || bus->match(blob, parentoffset))
+			return bus;
+	}
+
+	/*
+	 * We should always have matched the default bus at least, since
+	 * it has a NULL match field. If we didn't then it somehow isn't
+	 * in the of_busses array or something equally catastrophic has
+	 * gone wrong.
+	 */
+	assert(0);
+	return NULL;
+}
+
 static int of_translate_one(void * blob, int parent, struct of_bus *bus,
 			    struct of_bus *pbus, fdt32_t *addr,
 			    int na, int ns, int pna, const char *rprop)
@@ -1113,7 +1208,7 @@ static u64 __of_translate_address(void *blob, int node_offset, const fdt32_t *in
 	parent = fdt_parent_offset(blob, node_offset);
 	if (parent < 0)
 		goto bail;
-	bus = &of_busses[0];
+	bus = of_match_bus(blob, parent);
 
 	/* Cound address cells & copy address locally */
 	bus->count_cells(blob, parent, &na, &ns);
@@ -1142,7 +1237,7 @@ static u64 __of_translate_address(void *blob, int node_offset, const fdt32_t *in
 		}
 
 		/* Get new parent bus and counts */
-		pbus = &of_busses[0];
+		pbus = of_match_bus(blob, parent);
 		pbus->count_cells(blob, parent, &pna, &pns);
 		if (!OF_CHECK_COUNTS(pna, pns)) {
 			printf("%s: Bad cell count for %s\n", __FUNCTION__,
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index c5c9d2a..8749561 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -178,4 +178,27 @@ config SPL_OF_TRANSLATE
 	  used for the address translation. This function is faster and
 	  smaller in size than fdt_translate_address().
 
+config OF_ISA_BUS
+	bool
+	depends on OF_TRANSLATE
+	help
+	  Is this option is enabled then support for the ISA bus will
+	  be included for addresses read from DT. This is something that
+	  should be known to be required or not based upon the board
+	  being targetted, and whether or not it makes use of an ISA bus.
+
+	  The bus is matched based upon its node name equalling "isa". The
+	  busses #address-cells should equal 2, with the first cell being
+	  used to hold flags & flag 0x1 indicating that the address range
+	  should be accessed using I/O port in/out accessors. The second
+	  cell holds the offset into ISA bus address space. The #size-cells
+	  property should equal 1, and of course holds the size of the
+	  address range used by a device.
+
+	  If this option is not enabled then support for the ISA bus is
+	  not included and any such busses used in DT will be treated as
+	  typical simple-bus compatible busses. This will lead to
+	  mistranslation of device addresses, so ensure that this is
+	  enabled if your board does include an ISA bus.
+
 endmenu
-- 
2.8.2

[U-Boot] [PATCH v3 2/5] fdt: Document the rest of struct of_bus

[Paul Burton]

Provide some documentation for the fields of struct of_bus, for
consistency with that provided for the new match field.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---

Changes in v3: None
Changes in v2:
- New patch.

 common/fdt_support.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/common/fdt_support.c b/common/fdt_support.c
index 96b5d0a..5d8eb12 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -966,10 +966,29 @@ static void of_dump_addr(const char *s, const fdt32_t *addr, int na) { }
 
 /**
  * struct of_bus - Callbacks for bus specific translators
+ * @name:	A string used to identify this bus in debug output.
+ * @addresses:	The name of the DT property from which addresses are
+ *		to be read, typically "reg".
  * @match:	Return non-zero if the node whose parent is at
  *		parentoffset in the FDT blob corresponds to a bus
  *		of this type, otherwise return zero. If NULL a match
  *		is assumed.
+ * @count_cells:Count how many cells (be32 values) a node whose parent
+ *		is at parentoffset in the FDT blob will require to
+ *		represent its address (written to *addrc) & size
+ *		(written to *sizec).
+ * @map:	Map the address addr from the address space of this
+ *		bus to that of its parent, making use of the ranges
+ *		read from DT to an array at range. na and ns are the
+ *		number of cells (be32 values) used to hold and address
+ *		or size, respectively, for this bus. pna is the number
+ *		of cells used to hold an address for the parent bus.
+ *		Returns the address in the address space of the parent
+ *		bus.
+ * @translate:	Update the value of the address cells at addr within an
+ *		FDT by adding offset to it. na specifies the number of
+ *		cells used to hold the address being translated. Returns
+ *		zero on success, non-zero on error.
  *
  * Each bus type will include a struct of_bus in the of_busses array,
  * providing implementations of some or all of the functions used to
-- 
2.8.2

[U-Boot] [PATCH v3 3/5] dm: ns16550: Don't map_physmem for I/O ports

[Paul Burton]

If the UART is to be accessed using I/O port accessors (inb & outb) then
using map_physmem doesn't make sense, since it operates in a different
memory space. Remove the call to map_physmem when
CONFIG_SYS_NS16550_PORT_MAPPED is defined, allowing I/O port addresses
to not be mangled by the incorrect mapping.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---

Changes in v3: None
Changes in v2:
- New patch, part of a simplified approach tackling only a single Malta UART.

 drivers/serial/ns16550.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 28da9dd..e58e6aa 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -100,7 +100,11 @@ static void ns16550_writeb(NS16550_t port, int offset, int value)
 	unsigned char *addr;
 
 	offset *= 1 << plat->reg_shift;
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
+	addr = (unsigned char *)plat->base + offset;
+#else
 	addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset;
+#endif
 	/*
 	 * As far as we know it doesn't make sense to support selection of
 	 * these options at run-time, so use the existing CONFIG options.
@@ -114,7 +118,11 @@ static int ns16550_readb(NS16550_t port, int offset)
 	unsigned char *addr;
 
 	offset *= 1 << plat->reg_shift;
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
+	addr = (unsigned char *)plat->base + offset;
+#else
 	addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset;
+#endif
 
 	return serial_in_shift(addr + plat->reg_offset, plat->reg_shift);
 }
-- 
2.8.2

[U-Boot] [PATCH v3 4/5] malta: Tidy up UART address selection

[Paul Burton]

The address of the UART differs based upon the system controller because
it's actually within the I/O port region, which is in a different
location for each system controller. Rather than handling this as 2
UARTs with the correct one selected at runtime, use I/O port accessors
for the UART such that access to it gets translated into the I/O port
region automatically.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---

Changes in v3: None
Changes in v2:
- New patch, simplifying the later DT conversion.

 board/imgtec/malta/malta.c | 13 -------------
 include/configs/malta.h    |  4 ++--
 2 files changed, 2 insertions(+), 15 deletions(-)

diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
index 3a9e780..4955043 100644
--- a/board/imgtec/malta/malta.c
+++ b/board/imgtec/malta/malta.c
@@ -12,7 +12,6 @@
 #include <pci_gt64120.h>
 #include <pci_msc01.h>
 #include <rtc.h>
-#include <serial.h>
 
 #include <asm/addrspace.h>
 #include <asm/io.h>
@@ -161,18 +160,6 @@ int misc_init_r(void)
 	return 0;
 }
 
-struct serial_device *default_serial_console(void)
-{
-	switch (malta_sys_con()) {
-	case SYSCON_GT64120:
-		return &eserial1_device;
-
-	default:
-	case SYSCON_MSC01:
-		return &eserial2_device;
-	}
-}
-
 void pci_init_board(void)
 {
 	pci_dev_t bdf;
diff --git a/include/configs/malta.h b/include/configs/malta.h
index 04dca71..1c3c83c 100644
--- a/include/configs/malta.h
+++ b/include/configs/malta.h
@@ -67,10 +67,10 @@
 #define CONFIG_BAUDRATE			115200
 
 #define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_PORT_MAPPED
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		(115200 * 16)
-#define CONFIG_SYS_NS16550_COM1		0xb80003f8
-#define CONFIG_SYS_NS16550_COM2		0xbb0003f8
+#define CONFIG_SYS_NS16550_COM1		0x3f8
 #define CONFIG_CONS_INDEX		1
 
 /*
-- 
2.8.2

[U-Boot] [PATCH v3 5/5] malta: Use device model & tree for UART

[Paul Burton]

Make use of device model & device tree to probe the UART driver. This is
the initial step in bringing Malta up to date with driver model, and
allows for cleaner handling of the different I/O addresses for different
system controllers by specifying the ISA bus address instead of a
translated memory address.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---

Changes in v3:
- Don't select CONFIG_OF_EMBED for Malta, but add it to defconfigs.
- Add @0 to isa node name to satisfy DTC master.
- Rebase atop u-boot-mips/next.

Changes in v2:
- Only handle the UART we already use, for simplicity.

 arch/mips/Kconfig           |  4 ++++
 arch/mips/dts/Makefile      |  1 +
 arch/mips/dts/mti,malta.dts | 32 ++++++++++++++++++++++++++++++++
 configs/malta_defconfig     |  2 ++
 configs/maltael_defconfig   |  2 ++
 include/configs/malta.h     |  6 ------
 6 files changed, 41 insertions(+), 6 deletions(-)
 create mode 100644 arch/mips/dts/mti,malta.dts

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dc34c18..53363e3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -23,7 +23,11 @@ config TARGET_QEMU_MIPS
 
 config TARGET_MALTA
 	bool "Support malta"
+	select DM
+	select DM_SERIAL
 	select DYNAMIC_IO_PORT_BASE
+	select OF_CONTROL
+	select OF_ISA_BUS
 	select SUPPORTS_BIG_ENDIAN
 	select SUPPORTS_LITTLE_ENDIAN
 	select SUPPORTS_CPU_MIPS32_R1
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index a94b745..2f04d73 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -4,6 +4,7 @@
 
 dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
 dtb-$(CONFIG_TARGET_AP143) += ap143.dtb
+dtb-$(CONFIG_TARGET_MALTA) += mti,malta.dtb
 dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
 dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
 
diff --git a/arch/mips/dts/mti,malta.dts b/arch/mips/dts/mti,malta.dts
new file mode 100644
index 0000000..d339229
--- /dev/null
+++ b/arch/mips/dts/mti,malta.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00001000;	/* Exception vectors */
+/memreserve/ 0x000f0000 0x00010000;	/* PIIX4 ISA memory */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mti,malta";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	isa at 0 {
+		compatible = "isa";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0 0x1000>;
+
+		uart0: serial at 3f8 {
+			compatible = "ns16550a";
+
+			reg = <1 0x3f8 0x40>;
+			reg-shift = <0>;
+
+			clock-frequency = <1843200>;
+
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
diff --git a/configs/malta_defconfig b/configs/malta_defconfig
index a16f10b..3c3bb16 100644
--- a/configs/malta_defconfig
+++ b/configs/malta_defconfig
@@ -1,5 +1,6 @@
 CONFIG_MIPS=y
 CONFIG_TARGET_MALTA=y
+CONFIG_DEFAULT_DEVICE_TREE="mti,malta"
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="malta # "
 # CONFIG_CMD_LOADB is not set
@@ -9,5 +10,6 @@ CONFIG_SYS_PROMPT="malta # "
 CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_PING=y
+CONFIG_OF_EMBED=y
 CONFIG_SYS_NS16550=y
 CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig
index 5289797..b245d91 100644
--- a/configs/maltael_defconfig
+++ b/configs/maltael_defconfig
@@ -1,6 +1,7 @@
 CONFIG_MIPS=y
 CONFIG_TARGET_MALTA=y
 CONFIG_SYS_LITTLE_ENDIAN=y
+CONFIG_DEFAULT_DEVICE_TREE="mti,malta"
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="maltael # "
 # CONFIG_CMD_LOADB is not set
@@ -10,5 +11,6 @@ CONFIG_SYS_PROMPT="maltael # "
 CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_PING=y
+CONFIG_OF_EMBED=y
 CONFIG_SYS_NS16550=y
 CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/include/configs/malta.h b/include/configs/malta.h
index 1c3c83c..e03935b 100644
--- a/include/configs/malta.h
+++ b/include/configs/malta.h
@@ -65,13 +65,7 @@
  * Serial driver
  */
 #define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_PORT_MAPPED
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(115200 * 16)
-#define CONFIG_SYS_NS16550_COM1		0x3f8
-#define CONFIG_CONS_INDEX		1
 
 /*
  * Flash configuration
-- 
2.8.2

[U-Boot] [PATCH v4 3/5] dm: ns16550: Don't map_physmem for I/O ports

[Daniel Schwierzeck]

From: Paul Burton <paul.burton@imgtec.com>

If the UART is to be accessed using I/O port accessors (inb & outb) then
using map_physmem doesn't make sense, since it operates in a different
memory space. Remove the call to map_physmem when
CONFIG_SYS_NS16550_PORT_MAPPED is defined, allowing I/O port addresses
to not be mangled by the incorrect mapping.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---

Updated patch due to discussion in:
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/261776/focus=262627

Changes in v4: 
- Only do map_physmem() once in ns16550_serial_ofdata_to_platdata().
Changes in v3: None
Changes in v2:
- New patch, part of a simplified approach tackling only a single Malta UART.


 drivers/serial/ns16550.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 28da9dd..b6eac1c 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -100,7 +100,8 @@ static void ns16550_writeb(NS16550_t port, int offset, int value)
 	unsigned char *addr;
 
 	offset *= 1 << plat->reg_shift;
-	addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset;
+	addr = (unsigned char *)plat->base + offset;
+
 	/*
 	 * As far as we know it doesn't make sense to support selection of
 	 * these options at run-time, so use the existing CONFIG options.
@@ -114,7 +115,7 @@ static int ns16550_readb(NS16550_t port, int offset)
 	unsigned char *addr;
 
 	offset *= 1 << plat->reg_shift;
-	addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset;
+	addr = (unsigned char *)plat->base + offset;
 
 	return serial_in_shift(addr + plat->reg_offset, plat->reg_shift);
 }
@@ -400,7 +401,12 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
 	if (addr == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
 	plat->base = addr;
+#else
+	plat->base = map_physmem(addr, 0, MAP_NOCACHE);
+#endif
+
 	plat->reg_offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
 				     "reg-offset", 0);
 	plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
-- 
2.7.4

[U-Boot] [PATCH v3 1/5] fdt: Support for ISA busses

[Daniel Schwierzeck]

Am 17.05.2016 um 08:43 schrieb Paul Burton:
> Support ISA busses in much the same way as Linux does. This allows for
> ISA bus addresses to be translated, and only if CONFIG_OF_ISA_BUS is
> selected in order to avoid including the code in builds which won't need
> it.
> 
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
> 
> Changes in v3: None
> Changes in v2:
> - Document the match function pointer in struct of_bus.
> - Make CONFIG_OF_ISA_BUS not user-selectable, and explain it in help text.
> - assert() that of_match_bus didn't fail instead of BUG(), and comment why.
> - s/&of_busses[0]/of_busses/
> 
>  common/fdt_support.c | 101 +++++++++++++++++++++++++++++++++++++++++++++++++--
>  drivers/core/Kconfig |  23 ++++++++++++
>  2 files changed, 121 insertions(+), 3 deletions(-)

applied to u-boot-mips, thanks.

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160526/94b3e775/attachment.sig>

[U-Boot] [PATCH v3 2/5] fdt: Document the rest of struct of_bus

[Daniel Schwierzeck]

Am 17.05.2016 um 08:43 schrieb Paul Burton:
> Provide some documentation for the fields of struct of_bus, for
> consistency with that provided for the new match field.
> 
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
> 
> Changes in v3: None
> Changes in v2:
> - New patch.
> 
>  common/fdt_support.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 

applied to u-boot-mips, thanks.

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160526/fc130e90/attachment.sig>

[U-Boot] [PATCH v4 3/5] dm: ns16550: Don't map_physmem for I/O ports

[Daniel Schwierzeck]

Am 26.05.2016 um 00:01 schrieb Daniel Schwierzeck:
> From: Paul Burton <paul.burton@imgtec.com>
> 
> If the UART is to be accessed using I/O port accessors (inb & outb) then
> using map_physmem doesn't make sense, since it operates in a different
> memory space. Remove the call to map_physmem when
> CONFIG_SYS_NS16550_PORT_MAPPED is defined, allowing I/O port addresses
> to not be mangled by the incorrect mapping.
> 
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
> ---
> 
> Updated patch due to discussion in:
> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/261776/focus=262627
> 
> Changes in v4: 
> - Only do map_physmem() once in ns16550_serial_ofdata_to_platdata().
> Changes in v3: None
> Changes in v2:
> - New patch, part of a simplified approach tackling only a single Malta UART.
> 
> 
>  drivers/serial/ns16550.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 

applied to u-boot-mips, thanks.

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160526/92e9c4d5/attachment.sig>

[U-Boot] [PATCH v3 4/5] malta: Tidy up UART address selection

[Daniel Schwierzeck]

Am 17.05.2016 um 08:43 schrieb Paul Burton:
> The address of the UART differs based upon the system controller because
> it's actually within the I/O port region, which is in a different
> location for each system controller. Rather than handling this as 2
> UARTs with the correct one selected at runtime, use I/O port accessors
> for the UART such that access to it gets translated into the I/O port
> region automatically.
> 
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
> ---
> 
> Changes in v3: None
> Changes in v2:
> - New patch, simplifying the later DT conversion.
> 
>  board/imgtec/malta/malta.c | 13 -------------
>  include/configs/malta.h    |  4 ++--
>  2 files changed, 2 insertions(+), 15 deletions(-)
> 

applied to u-boot-mips, thanks.

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160526/1e8a646a/attachment.sig>

[U-Boot] [PATCH v3 5/5] malta: Use device model & tree for UART

[Daniel Schwierzeck]

Am 17.05.2016 um 08:43 schrieb Paul Burton:
> Make use of device model & device tree to probe the UART driver. This is
> the initial step in bringing Malta up to date with driver model, and
> allows for cleaner handling of the different I/O addresses for different
> system controllers by specifying the ISA bus address instead of a
> translated memory address.
> 
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
> ---
> 
> Changes in v3:
> - Don't select CONFIG_OF_EMBED for Malta, but add it to defconfigs.
> - Add @0 to isa node name to satisfy DTC master.
> - Rebase atop u-boot-mips/next.
> 
> Changes in v2:
> - Only handle the UART we already use, for simplicity.
> 
>  arch/mips/Kconfig           |  4 ++++
>  arch/mips/dts/Makefile      |  1 +
>  arch/mips/dts/mti,malta.dts | 32 ++++++++++++++++++++++++++++++++
>  configs/malta_defconfig     |  2 ++
>  configs/maltael_defconfig   |  2 ++
>  include/configs/malta.h     |  6 ------
>  6 files changed, 41 insertions(+), 6 deletions(-)
>  create mode 100644 arch/mips/dts/mti,malta.dts
> 

applied to u-boot-mips, thanks.

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160526/e753b46f/attachment.sig>