All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: "Rafał Miłecki" <zajec5@gmail.com>,
	"Brett Rudley" <brudley@broadcom.com>,
	"Arend van Spriel" <arend@broadcom.com>,
	"Franky (Zhenhui) Lin" <frankyl@broadcom.com>,
	"Hante Meuleman" <meuleman@broadcom.com>,
	"Pieter-Paul Giesberts" <pieterpg@broadcom.com>,
	linux-wireless@vger.kernel.org (open list:BROADCOM BRCM80211
	IEEE802.11n WIRELESS DRIVER),
	brcm80211-dev-list@broadcom.com (open list:BROADCOM BRCM80211
	IEEE802.11n WIRELESS DRIVER),
	netdev@vger.kernel.org (open list:NETWORKING DRIVERS),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V2 4.8 1/2] brcmutil: add field storing control channel to the struct brcmu_chan
Date: Fri, 20 May 2016 13:38:57 +0200	[thread overview]
Message-ID: <1463744355-5528-1-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1463655770-22467-1-git-send-email-zajec5@gmail.com>

Our d11 code supports encoding/decoding channel info into/from chanspec
format used by firmware. Current implementation is quite misleading
because of the way "chnum" field is used.
When encoding channel info, "chnum" has to be filled by a caller with
*center* channel number. However when decoding chanspec the same field
is filled with a *control* channel number.

1) This can be confusing. It's expected for information to be the same
   after encoding and decoding.
2) It doesn't allow accessing all info when decoding. Some functions may
   need to know both channel numbers, e.g. cfg80211 callback getting
   current channel.
Solve this by adding a separated field for control channel.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
V2: Update commit description message.
---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         | 17 +++++++++--------
 .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 10 +++++-----
 .../net/wireless/broadcom/brcm80211/brcmutil/d11.c | 18 ++++++++++--------
 .../broadcom/brcm80211/include/brcmu_d11.h         | 22 ++++++++++++++++++++++
 4 files changed, 46 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index d0631b6..597495d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -2734,7 +2734,7 @@ static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg,
 	if (!bi->ctl_ch) {
 		ch.chspec = le16_to_cpu(bi->chanspec);
 		cfg->d11inf.decchspec(&ch);
-		bi->ctl_ch = ch.chnum;
+		bi->ctl_ch = ch.control_ch_num;
 	}
 	channel = bi->ctl_ch;
 
@@ -2852,7 +2852,7 @@ static s32 brcmf_inform_ibss(struct brcmf_cfg80211_info *cfg,
 	else
 		band = wiphy->bands[NL80211_BAND_5GHZ];
 
-	freq = ieee80211_channel_to_frequency(ch.chnum, band->band);
+	freq = ieee80211_channel_to_frequency(ch.control_ch_num, band->band);
 	cfg->channel = freq;
 	notify_channel = ieee80211_get_channel(wiphy, freq);
 
@@ -2862,7 +2862,7 @@ static s32 brcmf_inform_ibss(struct brcmf_cfg80211_info *cfg,
 	notify_ielen = le32_to_cpu(bi->ie_length);
 	notify_signal = (s16)le16_to_cpu(bi->RSSI) * 100;
 
-	brcmf_dbg(CONN, "channel: %d(%d)\n", ch.chnum, freq);
+	brcmf_dbg(CONN, "channel: %d(%d)\n", ch.control_ch_num, freq);
 	brcmf_dbg(CONN, "capability: %X\n", notify_capability);
 	brcmf_dbg(CONN, "beacon interval: %d\n", notify_interval);
 	brcmf_dbg(CONN, "signal: %d\n", notify_signal);
@@ -5280,7 +5280,7 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg,
 	else
 		band = wiphy->bands[NL80211_BAND_5GHZ];
 
-	freq = ieee80211_channel_to_frequency(ch.chnum, band->band);
+	freq = ieee80211_channel_to_frequency(ch.control_ch_num, band->band);
 	notify_channel = ieee80211_get_channel(wiphy, freq);
 
 done:
@@ -5802,14 +5802,15 @@ static int brcmf_construct_chaninfo(struct brcmf_cfg80211_info *cfg,
 		channel = band->channels;
 		index = band->n_channels;
 		for (j = 0; j < band->n_channels; j++) {
-			if (channel[j].hw_value == ch.chnum) {
+			if (channel[j].hw_value == ch.control_ch_num) {
 				index = j;
 				break;
 			}
 		}
 		channel[index].center_freq =
-			ieee80211_channel_to_frequency(ch.chnum, band->band);
-		channel[index].hw_value = ch.chnum;
+			ieee80211_channel_to_frequency(ch.control_ch_num,
+						       band->band);
+		channel[index].hw_value = ch.control_ch_num;
 
 		/* assuming the chanspecs order is HT20,
 		 * HT40 upper, HT40 lower, and VHT80.
@@ -5911,7 +5912,7 @@ static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg)
 			if (WARN_ON(ch.bw != BRCMU_CHAN_BW_40))
 				continue;
 			for (j = 0; j < band->n_channels; j++) {
-				if (band->channels[j].hw_value == ch.chnum)
+				if (band->channels[j].hw_value == ch.control_ch_num)
 					break;
 			}
 			if (WARN_ON(j == band->n_channels))
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index a70cda6..1652a48 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1246,7 +1246,7 @@ bool brcmf_p2p_scan_finding_common_channel(struct brcmf_cfg80211_info *cfg,
 		if (!bi->ctl_ch) {
 			ch.chspec = le16_to_cpu(bi->chanspec);
 			cfg->d11inf.decchspec(&ch);
-			bi->ctl_ch = ch.chnum;
+			bi->ctl_ch = ch.control_ch_num;
 		}
 		afx_hdl->peer_chan = bi->ctl_ch;
 		brcmf_dbg(TRACE, "ACTION FRAME SCAN : Peer %pM found, channel : %d\n",
@@ -1385,7 +1385,7 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp,
 			if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
 				     &p2p->status) &&
 			    (ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) {
-				afx_hdl->peer_chan = ch.chnum;
+				afx_hdl->peer_chan = ch.control_ch_num;
 				brcmf_dbg(INFO, "GON request: Peer found, channel=%d\n",
 					  afx_hdl->peer_chan);
 				complete(&afx_hdl->act_frm_scan);
@@ -1428,7 +1428,7 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp,
 	memcpy(&mgmt_frame->u, frame, mgmt_frame_len);
 	mgmt_frame_len += offsetof(struct ieee80211_mgmt, u);
 
-	freq = ieee80211_channel_to_frequency(ch.chnum,
+	freq = ieee80211_channel_to_frequency(ch.control_ch_num,
 					      ch.band == BRCMU_CHAN_BAND_2G ?
 					      NL80211_BAND_2GHZ :
 					      NL80211_BAND_5GHZ);
@@ -1873,7 +1873,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp,
 
 	if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status) &&
 	    (ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) {
-		afx_hdl->peer_chan = ch.chnum;
+		afx_hdl->peer_chan = ch.control_ch_num;
 		brcmf_dbg(INFO, "PROBE REQUEST: Peer found, channel=%d\n",
 			  afx_hdl->peer_chan);
 		complete(&afx_hdl->act_frm_scan);
@@ -1898,7 +1898,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp,
 
 	mgmt_frame = (u8 *)(rxframe + 1);
 	mgmt_frame_len = e->datalen - sizeof(*rxframe);
-	freq = ieee80211_channel_to_frequency(ch.chnum,
+	freq = ieee80211_channel_to_frequency(ch.control_ch_num,
 					      ch.band == BRCMU_CHAN_BAND_2G ?
 					      NL80211_BAND_2GHZ :
 					      NL80211_BAND_5GHZ);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
index 2b2522b..d8b79cb 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
@@ -107,6 +107,7 @@ static void brcmu_d11n_decchspec(struct brcmu_chan *ch)
 	u16 val;
 
 	ch->chnum = (u8)(ch->chspec & BRCMU_CHSPEC_CH_MASK);
+	ch->control_ch_num = ch->chnum;
 
 	switch (ch->chspec & BRCMU_CHSPEC_D11N_BW_MASK) {
 	case BRCMU_CHSPEC_D11N_BW_20:
@@ -118,10 +119,10 @@ static void brcmu_d11n_decchspec(struct brcmu_chan *ch)
 		val = ch->chspec & BRCMU_CHSPEC_D11N_SB_MASK;
 		if (val == BRCMU_CHSPEC_D11N_SB_L) {
 			ch->sb = BRCMU_CHAN_SB_L;
-			ch->chnum -= CH_10MHZ_APART;
+			ch->control_ch_num -= CH_10MHZ_APART;
 		} else {
 			ch->sb = BRCMU_CHAN_SB_U;
-			ch->chnum += CH_10MHZ_APART;
+			ch->control_ch_num += CH_10MHZ_APART;
 		}
 		break;
 	default:
@@ -147,6 +148,7 @@ static void brcmu_d11ac_decchspec(struct brcmu_chan *ch)
 	u16 val;
 
 	ch->chnum = (u8)(ch->chspec & BRCMU_CHSPEC_CH_MASK);
+	ch->control_ch_num = ch->chnum;
 
 	switch (ch->chspec & BRCMU_CHSPEC_D11AC_BW_MASK) {
 	case BRCMU_CHSPEC_D11AC_BW_20:
@@ -158,10 +160,10 @@ static void brcmu_d11ac_decchspec(struct brcmu_chan *ch)
 		val = ch->chspec & BRCMU_CHSPEC_D11AC_SB_MASK;
 		if (val == BRCMU_CHSPEC_D11AC_SB_L) {
 			ch->sb = BRCMU_CHAN_SB_L;
-			ch->chnum -= CH_10MHZ_APART;
+			ch->control_ch_num -= CH_10MHZ_APART;
 		} else if (val == BRCMU_CHSPEC_D11AC_SB_U) {
 			ch->sb = BRCMU_CHAN_SB_U;
-			ch->chnum += CH_10MHZ_APART;
+			ch->control_ch_num += CH_10MHZ_APART;
 		} else {
 			WARN_ON_ONCE(1);
 		}
@@ -172,16 +174,16 @@ static void brcmu_d11ac_decchspec(struct brcmu_chan *ch)
 					 BRCMU_CHSPEC_D11AC_SB_SHIFT);
 		switch (ch->sb) {
 		case BRCMU_CHAN_SB_LL:
-			ch->chnum -= CH_30MHZ_APART;
+			ch->control_ch_num -= CH_30MHZ_APART;
 			break;
 		case BRCMU_CHAN_SB_LU:
-			ch->chnum -= CH_10MHZ_APART;
+			ch->control_ch_num -= CH_10MHZ_APART;
 			break;
 		case BRCMU_CHAN_SB_UL:
-			ch->chnum += CH_10MHZ_APART;
+			ch->control_ch_num += CH_10MHZ_APART;
 			break;
 		case BRCMU_CHAN_SB_UU:
-			ch->chnum += CH_30MHZ_APART;
+			ch->control_ch_num += CH_30MHZ_APART;
 			break;
 		default:
 			WARN_ON_ONCE(1);
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_d11.h b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_d11.h
index f9745ea..8b8b2ec 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_d11.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_d11.h
@@ -125,14 +125,36 @@ enum brcmu_chan_sb {
 	BRCMU_CHAN_SB_UU = BRCMU_CHAN_SB_LUU,
 };
 
+/**
+ * struct brcmu_chan - stores channel formats
+ *
+ * This structure can be used with functions translating chanspec into generic
+ * channel info and the other way.
+ *
+ * @chspec: firmware specific format
+ * @chnum: center channel number
+ * @control_ch_num: control channel number
+ * @band: frequency band
+ * @bw: channel width
+ * @sb: control sideband (location of control channel against the center one)
+ */
 struct brcmu_chan {
 	u16 chspec;
 	u8 chnum;
+	u8 control_ch_num;
 	u8 band;
 	enum brcmu_chan_bw bw;
 	enum brcmu_chan_sb sb;
 };
 
+/**
+ * struct brcmu_d11inf - provides functions translating channel format
+ *
+ * @io_type: determines version of channel format used by firmware
+ * @encchspec: encodes channel info into a chanspec, requires center channel
+ *	number, ignores control one
+ * @decchspec: decodes chanspec into generic info
+ */
 struct brcmu_d11inf {
 	u8 io_type;
 
-- 
1.8.4.5


  parent reply	other threads:[~2016-05-20 11:39 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-19 11:02 [PATCH 4.8 1/2] brcmutil: add field storing control channel to the struct brcmu_chan Rafał Miłecki
2016-05-19 11:02 ` [PATCH 4.8 2/2] brcmfmac: support get_channel cfg80211 callback Rafał Miłecki
2016-05-20  7:42   ` Arend Van Spriel
2016-05-20  7:42     ` Arend Van Spriel
2016-05-20 10:54     ` Rafał Miłecki
2016-05-20 10:54       ` Rafał Miłecki
2016-05-20 10:54       ` Rafał Miłecki
2016-05-20  7:52 ` [PATCH 4.8 1/2] brcmutil: add field storing control channel to the struct brcmu_chan Arend Van Spriel
2016-05-20  7:52   ` Arend Van Spriel
2016-05-20 11:38 ` Rafał Miłecki [this message]
2016-05-20 11:38   ` [PATCH V2 4.8 2/2] brcmfmac: support get_channel cfg80211 callback Rafał Miłecki
2016-05-20 11:38     ` Rafał Miłecki
2016-06-14 14:28   ` [V2, 4.8, 1/2] brcmutil: add field storing control channel to the struct brcmu_chan Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463744355-5528-1-git-send-email-zajec5@gmail.com \
    --to=zajec5@gmail.com \
    --cc=arend@broadcom.com \
    --cc=brcm80211-dev-list@broadcom.com \
    --cc=brudley@broadcom.com \
    --cc=frankyl@broadcom.com \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=meuleman@broadcom.com \
    --cc=netdev@vger.kernel.org \
    --cc=pieterpg@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.