* [PATCH 0/2] Input: surface3_spi: Surface Pen Support @ 2016-05-23 13:55 Stephen Just 2016-05-23 13:55 ` [PATCH 1/2] Input - surface3_spi: Prepare to add support for Surface Pen Stephen Just ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Stephen Just @ 2016-05-23 13:55 UTC (permalink / raw) To: linux-input, Dmitry Torokhov, Benjamin Tissoires Cc: Stephen Just, Bastien Nocera This series adds support for Surface Pen devices to the Surface 3 touchscreen input driver. This series works with both styles of pen: the old style with pressure sensitive tip, an eraser button, and a secondary input button, as well as the new style pen which does not have a dedicated eraser button. The top button on the pen is not supported by this patch. Those buttons are a separate Bluetooth device. Stephen Just (2): Input - surface3_spi: Prepare to add support for Surface Pen Input - surface3_spi: add surface pen support for Surface 3 drivers/input/touchscreen/surface3_spi.c | 140 ++++++++++++++++++++++++++++--- 1 file changed, 127 insertions(+), 13 deletions(-) -- 2.8.2 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] Input - surface3_spi: Prepare to add support for Surface Pen 2016-05-23 13:55 [PATCH 0/2] Input: surface3_spi: Surface Pen Support Stephen Just @ 2016-05-23 13:55 ` Stephen Just 2016-05-23 13:55 ` [PATCH 2/2] Input - surface3_spi: add surface pen support for Surface 3 Stephen Just 2016-05-24 13:43 ` [PATCH v2 0/2] Input: surface3_spi: Surface Pen Support Stephen Just 2 siblings, 0 replies; 9+ messages in thread From: Stephen Just @ 2016-05-23 13:55 UTC (permalink / raw) To: linux-input, Dmitry Torokhov, Benjamin Tissoires Cc: Stephen Just, Bastien Nocera Surface Pens can be supported by handling a second report type. Prepare for this change. Signed-off-by: Stephen Just <stephenjust@gmail.com> --- drivers/input/touchscreen/surface3_spi.c | 38 +++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 13 deletions(-) diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c index 58631d1..204a162 100644 --- a/drivers/input/touchscreen/surface3_spi.c +++ b/drivers/input/touchscreen/surface3_spi.c @@ -27,6 +27,8 @@ #define SURFACE3_PACKET_SIZE 264 +#define SURFACE3_REPORT_TOUCH 0xd2 + struct surface3_ts_data { struct spi_device *spi; struct gpio_desc *gpiod_rst[2]; @@ -84,19 +86,10 @@ static void surface3_spi_report_touch(struct surface3_ts_data *ts_data, } } -static void surface3_spi_process(struct surface3_ts_data *ts_data) +static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *data) { - const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, - 0x01, 0xd2, 0x00, 0x80, 0x01, 0x03, 0x03}; - u8 *data = ts_data->rd_buf; u16 timestamp; unsigned int i; - - if (memcmp(header, data, sizeof(header))) - dev_err(&ts_data->spi->dev, - "%s header error: %*ph, ignoring...\n", - __func__, (int)sizeof(header), data); - timestamp = get_unaligned_le16(&data[15]); for (i = 0; i < 13; i++) { @@ -121,6 +114,25 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data) input_sync(ts_data->input_dev); } +static void surface3_spi_process(struct surface3_ts_data *ts_data) +{ + const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01}; + + u8 *data = ts_data->rd_buf; + + if (memcmp(header, data, sizeof(header))) + dev_err(&ts_data->spi->dev, + "%s header error: %*ph, ignoring...\n", + __func__, (int)sizeof(header), data); + + if (data[9] == SURFACE3_REPORT_TOUCH) + surface3_spi_process_touch(ts_data, data); + else + dev_err(&ts_data->spi->dev, + "%s unknown packet type: %x, ignoring...\n", + __func__, data[9]); +} + static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id) { struct surface3_ts_data *data = dev_id; @@ -176,7 +188,7 @@ static int surface3_spi_get_gpio_config(struct surface3_ts_data *data) return 0; } -static int surface3_spi_create_input(struct surface3_ts_data *data) +static int surface3_spi_create_touch_input(struct surface3_ts_data *data) { struct input_dev *input; int error; @@ -199,7 +211,7 @@ static int surface3_spi_create_input(struct surface3_ts_data *data) input->phys = "input/ts"; input->id.bustype = BUS_SPI; input->id.vendor = 0x045e; /* Microsoft */ - input->id.product = 0x0000; + input->id.product = 0x0001; input->id.version = 0x0000; error = input_register_device(input); @@ -239,7 +251,7 @@ static int surface3_spi_probe(struct spi_device *spi) surface3_spi_power(data, false); surface3_spi_power(data, true); - error = surface3_spi_create_input(data); + error = surface3_spi_create_touch_input(data); if (error) return error; -- 2.8.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] Input - surface3_spi: add surface pen support for Surface 3 2016-05-23 13:55 [PATCH 0/2] Input: surface3_spi: Surface Pen Support Stephen Just 2016-05-23 13:55 ` [PATCH 1/2] Input - surface3_spi: Prepare to add support for Surface Pen Stephen Just @ 2016-05-23 13:55 ` Stephen Just 2016-05-24 10:05 ` Benjamin Tissoires 2016-05-24 13:43 ` [PATCH v2 0/2] Input: surface3_spi: Surface Pen Support Stephen Just 2 siblings, 1 reply; 9+ messages in thread From: Stephen Just @ 2016-05-23 13:55 UTC (permalink / raw) To: linux-input, Dmitry Torokhov, Benjamin Tissoires Cc: Stephen Just, Bastien Nocera This change creates a second input device which will handle input from a Surface Pen. The Surface Pen supplies a different packet header than touch events, so it is simple to handle one or the other. This patch handles both the newer Surface Pen with one button, and the older variant with a second button to switch to Eraser mode. Signed-off-by: Stephen Just <stephenjust@gmail.com> --- drivers/input/touchscreen/surface3_spi.c | 102 +++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c index 204a162..52a2cde 100644 --- a/drivers/input/touchscreen/surface3_spi.c +++ b/drivers/input/touchscreen/surface3_spi.c @@ -28,11 +28,13 @@ #define SURFACE3_PACKET_SIZE 264 #define SURFACE3_REPORT_TOUCH 0xd2 +#define SURFACE3_REPORT_PEN 0x16 struct surface3_ts_data { struct spi_device *spi; struct gpio_desc *gpiod_rst[2]; struct input_dev *input_dev; + struct input_dev *pen_input_dev; u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned; }; @@ -49,6 +51,14 @@ struct surface3_ts_data_finger { u32 padding; } __packed; +struct surface3_ts_data_pen { + u8 status; + __le16 x; + __le16 y; + __le16 pressure; + u8 padding; +} __packed; + static int surface3_spi_read(struct surface3_ts_data *ts_data) { struct spi_device *spi = ts_data->spi; @@ -114,6 +124,52 @@ static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *dat input_sync(ts_data->input_dev); } +static void surface3_spi_report_pen(struct surface3_ts_data *ts_data, + struct surface3_ts_data_pen *pen) +{ + int st = pen->status; + int prox = st & 0x01; + int rubber = st & 0x18; + + input_report_key(ts_data->pen_input_dev, + BTN_TOUCH, + (st & 0x12)); + + input_report_key(ts_data->pen_input_dev, + BTN_TOOL_PEN, + prox && !rubber); + + input_report_key(ts_data->pen_input_dev, + BTN_TOOL_RUBBER, + prox && rubber); + + if (st) { + input_report_key(ts_data->pen_input_dev, + BTN_STYLUS, + st & 0x04); + + input_report_abs(ts_data->pen_input_dev, + ABS_X, + get_unaligned_le16(&pen->x)); + input_report_abs(ts_data->pen_input_dev, + ABS_Y, + get_unaligned_le16(&pen->y)); + input_report_abs(ts_data->pen_input_dev, + ABS_PRESSURE, + get_unaligned_le16(&pen->pressure)); + } +} + +static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data) +{ + struct surface3_ts_data_pen *pen; + + pen = (struct surface3_ts_data_pen *)&data[15]; + + surface3_spi_report_pen(ts_data, pen); + input_sync(ts_data->pen_input_dev); +} + static void surface3_spi_process(struct surface3_ts_data *ts_data) { const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01}; @@ -127,6 +183,8 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data) if (data[9] == SURFACE3_REPORT_TOUCH) surface3_spi_process_touch(ts_data, data); + else if (data[9] == SURFACE3_REPORT_PEN) + surface3_spi_process_pen(ts_data, data); else dev_err(&ts_data->spi->dev, "%s unknown packet type: %x, ignoring...\n", @@ -224,6 +282,46 @@ static int surface3_spi_create_touch_input(struct surface3_ts_data *data) return 0; } +static int surface3_spi_create_pen_input(struct surface3_ts_data *data) +{ + struct input_dev *input; + int error; + + input = devm_input_allocate_device(&data->spi->dev); + if (!input) + return -ENOMEM; + + data->pen_input_dev = input; + + __set_bit(INPUT_PROP_DIRECT, input->propbit); + __set_bit(INPUT_PROP_POINTER, input->propbit); + input_set_abs_params(input, ABS_X, 0, 9600, 0, 0); + input_abs_set_res(input, ABS_X, 40); + input_set_abs_params(input, ABS_Y, 0, 7200, 0, 0); + input_abs_set_res(input, ABS_Y, 48); + input_set_abs_params(input, ABS_PRESSURE, 0, 1024, 0, 0); + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_STYLUS); + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); + input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER); + + input->name = "Surface3 SPI Pen Input"; + input->phys = "input/ts"; + input->id.bustype = BUS_SPI; + input->id.vendor = 0x045e; /* Microsoft */ + input->id.product = 0x0002; + input->id.version = 0x0000; + + error = input_register_device(input); + if (error) { + dev_err(&data->spi->dev, + "Failed to register input device: %d", error); + return error; + } + + return 0; +} + static int surface3_spi_probe(struct spi_device *spi) { struct surface3_ts_data *data; @@ -255,6 +353,10 @@ static int surface3_spi_probe(struct spi_device *spi) if (error) return error; + error = surface3_spi_create_pen_input(data); + if (error) + return error; + error = devm_request_threaded_irq(&spi->dev, spi->irq, NULL, surface3_spi_irq_handler, IRQF_ONESHOT, -- 2.8.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] Input - surface3_spi: add surface pen support for Surface 3 2016-05-23 13:55 ` [PATCH 2/2] Input - surface3_spi: add surface pen support for Surface 3 Stephen Just @ 2016-05-24 10:05 ` Benjamin Tissoires 2016-05-24 19:15 ` Stephen J 0 siblings, 1 reply; 9+ messages in thread From: Benjamin Tissoires @ 2016-05-24 10:05 UTC (permalink / raw) To: Stephen Just; +Cc: linux-input, Dmitry Torokhov, Bastien Nocera Hi Stephen, thanks for the submission. On May 23 2016 or thereabouts, Stephen Just wrote: > This change creates a second input device which will handle input from > a Surface Pen. The Surface Pen supplies a different packet header than > touch events, so it is simple to handle one or the other. > > This patch handles both the newer Surface Pen with one button, and the > older variant with a second button to switch to Eraser mode. Oh... Would you mind sharing an evemu-record of such older variant with the Eraser mode? We might need to deal with that differently in libinput... > > Signed-off-by: Stephen Just <stephenjust@gmail.com> > --- > drivers/input/touchscreen/surface3_spi.c | 102 +++++++++++++++++++++++++++++++ > 1 file changed, 102 insertions(+) > > diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c > index 204a162..52a2cde 100644 > --- a/drivers/input/touchscreen/surface3_spi.c > +++ b/drivers/input/touchscreen/surface3_spi.c > @@ -28,11 +28,13 @@ > #define SURFACE3_PACKET_SIZE 264 > > #define SURFACE3_REPORT_TOUCH 0xd2 > +#define SURFACE3_REPORT_PEN 0x16 > > struct surface3_ts_data { > struct spi_device *spi; > struct gpio_desc *gpiod_rst[2]; > struct input_dev *input_dev; > + struct input_dev *pen_input_dev; > > u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned; > }; > @@ -49,6 +51,14 @@ struct surface3_ts_data_finger { > u32 padding; > } __packed; > > +struct surface3_ts_data_pen { > + u8 status; > + __le16 x; > + __le16 y; > + __le16 pressure; > + u8 padding; > +} __packed; > + > static int surface3_spi_read(struct surface3_ts_data *ts_data) > { > struct spi_device *spi = ts_data->spi; > @@ -114,6 +124,52 @@ static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *dat > input_sync(ts_data->input_dev); > } > > +static void surface3_spi_report_pen(struct surface3_ts_data *ts_data, > + struct surface3_ts_data_pen *pen) > +{ > + int st = pen->status; > + int prox = st & 0x01; > + int rubber = st & 0x18; > + > + input_report_key(ts_data->pen_input_dev, > + BTN_TOUCH, > + (st & 0x12)); > + > + input_report_key(ts_data->pen_input_dev, > + BTN_TOOL_PEN, > + prox && !rubber); > + > + input_report_key(ts_data->pen_input_dev, > + BTN_TOOL_RUBBER, > + prox && rubber); > + > + if (st) { > + input_report_key(ts_data->pen_input_dev, > + BTN_STYLUS, > + st & 0x04); > + > + input_report_abs(ts_data->pen_input_dev, > + ABS_X, > + get_unaligned_le16(&pen->x)); > + input_report_abs(ts_data->pen_input_dev, > + ABS_Y, > + get_unaligned_le16(&pen->y)); > + input_report_abs(ts_data->pen_input_dev, > + ABS_PRESSURE, > + get_unaligned_le16(&pen->pressure)); > + } > +} > + > +static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data) > +{ > + struct surface3_ts_data_pen *pen; > + > + pen = (struct surface3_ts_data_pen *)&data[15]; > + > + surface3_spi_report_pen(ts_data, pen); > + input_sync(ts_data->pen_input_dev); > +} > + > static void surface3_spi_process(struct surface3_ts_data *ts_data) > { > const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01}; > @@ -127,6 +183,8 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data) > > if (data[9] == SURFACE3_REPORT_TOUCH) > surface3_spi_process_touch(ts_data, data); > + else if (data[9] == SURFACE3_REPORT_PEN) > + surface3_spi_process_pen(ts_data, data); nitpicking: a switch/case would present better :) The series is Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cheers, Benjamin > else > dev_err(&ts_data->spi->dev, > "%s unknown packet type: %x, ignoring...\n", > @@ -224,6 +282,46 @@ static int surface3_spi_create_touch_input(struct surface3_ts_data *data) > return 0; > } > > +static int surface3_spi_create_pen_input(struct surface3_ts_data *data) > +{ > + struct input_dev *input; > + int error; > + > + input = devm_input_allocate_device(&data->spi->dev); > + if (!input) > + return -ENOMEM; > + > + data->pen_input_dev = input; > + > + __set_bit(INPUT_PROP_DIRECT, input->propbit); > + __set_bit(INPUT_PROP_POINTER, input->propbit); > + input_set_abs_params(input, ABS_X, 0, 9600, 0, 0); > + input_abs_set_res(input, ABS_X, 40); > + input_set_abs_params(input, ABS_Y, 0, 7200, 0, 0); > + input_abs_set_res(input, ABS_Y, 48); > + input_set_abs_params(input, ABS_PRESSURE, 0, 1024, 0, 0); > + input_set_capability(input, EV_KEY, BTN_TOUCH); > + input_set_capability(input, EV_KEY, BTN_STYLUS); > + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); > + input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER); > + > + input->name = "Surface3 SPI Pen Input"; > + input->phys = "input/ts"; > + input->id.bustype = BUS_SPI; > + input->id.vendor = 0x045e; /* Microsoft */ > + input->id.product = 0x0002; > + input->id.version = 0x0000; > + > + error = input_register_device(input); > + if (error) { > + dev_err(&data->spi->dev, > + "Failed to register input device: %d", error); > + return error; > + } > + > + return 0; > +} > + > static int surface3_spi_probe(struct spi_device *spi) > { > struct surface3_ts_data *data; > @@ -255,6 +353,10 @@ static int surface3_spi_probe(struct spi_device *spi) > if (error) > return error; > > + error = surface3_spi_create_pen_input(data); > + if (error) > + return error; > + > error = devm_request_threaded_irq(&spi->dev, spi->irq, > NULL, surface3_spi_irq_handler, > IRQF_ONESHOT, > -- > 2.8.2 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] Input - surface3_spi: add surface pen support for Surface 3 2016-05-24 10:05 ` Benjamin Tissoires @ 2016-05-24 19:15 ` Stephen J 0 siblings, 0 replies; 9+ messages in thread From: Stephen J @ 2016-05-24 19:15 UTC (permalink / raw) To: Benjamin Tissoires; +Cc: linux-input, Dmitry Torokhov, Bastien Nocera On Tue, May 24, 2016 at 4:05 AM, Benjamin Tissoires <benjamin.tissoires@redhat.com> wrote: > Hi Stephen, > > thanks for the submission. > > On May 23 2016 or thereabouts, Stephen Just wrote: >> This change creates a second input device which will handle input from >> a Surface Pen. The Surface Pen supplies a different packet header than >> touch events, so it is simple to handle one or the other. >> >> This patch handles both the newer Surface Pen with one button, and the >> older variant with a second button to switch to Eraser mode. > > Oh... Would you mind sharing an evemu-record of such older variant with > the Eraser mode? We might need to deal with that differently in > libinput... > I have uploaded several evemu-record logs to https://gist.github.com/stephenjust/6f00811a2b9a6eccca506ea3f9f5d870 I think the most notable thing is that the pen seems to be able to report its position at a further distance than it is able to determine which buttons are pressed, i.e. if you hold the eraser button down and bring the pen towards the screen, there will be a point where the pen is detected, and then as you get closer, it will change tool types. The same is true for detecting the other stylus button, you need to get closer for it to be detected. >> [snip] >> >> static void surface3_spi_process(struct surface3_ts_data *ts_data) >> { >> const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01}; >> @@ -127,6 +183,8 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data) >> >> if (data[9] == SURFACE3_REPORT_TOUCH) >> surface3_spi_process_touch(ts_data, data); >> + else if (data[9] == SURFACE3_REPORT_PEN) >> + surface3_spi_process_pen(ts_data, data); > > nitpicking: a switch/case would present better :) > I will send out another revision with a switch/case shortly. Regards, Stephen Just ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 0/2] Input: surface3_spi: Surface Pen Support 2016-05-23 13:55 [PATCH 0/2] Input: surface3_spi: Surface Pen Support Stephen Just 2016-05-23 13:55 ` [PATCH 1/2] Input - surface3_spi: Prepare to add support for Surface Pen Stephen Just 2016-05-23 13:55 ` [PATCH 2/2] Input - surface3_spi: add surface pen support for Surface 3 Stephen Just @ 2016-05-24 13:43 ` Stephen Just 2016-05-24 13:43 ` [PATCH v2 1/2] Input - surface3_spi: Prepare to add support for Surface Pen Stephen Just 2016-05-24 13:43 ` [PATCH v2 2/2] Input - surface3_spi: add surface pen support for Surface 3 Stephen Just 2 siblings, 2 replies; 9+ messages in thread From: Stephen Just @ 2016-05-24 13:43 UTC (permalink / raw) To: linux-input, Dmitry Torokhov, Benjamin Tissoires Cc: Stephen Just, Bastien Nocera This series adds support for Surface Pen devices to the Surface 3 touchscreen input driver. This series works with both styles of pen: the old style with pressure sensitive tip, an eraser button, and a secondary input button, as well as the new style pen which does not have a dedicated eraser button. The top button on the pen is not supported by this patch. Those buttons are a separate Bluetooth device. This is v2 of the series with a minor code cleanup to use a switch/case as suggested by Benjamin. Regards, Stephen Just Stephen Just (2): Input - surface3_spi: Prepare to add support for Surface Pen Input - surface3_spi: add surface pen support for Surface 3 drivers/input/touchscreen/surface3_spi.c | 145 ++++++++++++++++++++++++++++--- 1 file changed, 132 insertions(+), 13 deletions(-) -- 2.8.2 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/2] Input - surface3_spi: Prepare to add support for Surface Pen 2016-05-24 13:43 ` [PATCH v2 0/2] Input: surface3_spi: Surface Pen Support Stephen Just @ 2016-05-24 13:43 ` Stephen Just 2016-05-24 13:43 ` [PATCH v2 2/2] Input - surface3_spi: add surface pen support for Surface 3 Stephen Just 1 sibling, 0 replies; 9+ messages in thread From: Stephen Just @ 2016-05-24 13:43 UTC (permalink / raw) To: linux-input, Dmitry Torokhov, Benjamin Tissoires Cc: Stephen Just, Bastien Nocera Surface Pens can be supported by handling a second report type. Prepare for this change. Signed-off-by: Stephen Just <stephenjust@gmail.com> --- drivers/input/touchscreen/surface3_spi.c | 38 +++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 13 deletions(-) diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c index 58631d1..204a162 100644 --- a/drivers/input/touchscreen/surface3_spi.c +++ b/drivers/input/touchscreen/surface3_spi.c @@ -27,6 +27,8 @@ #define SURFACE3_PACKET_SIZE 264 +#define SURFACE3_REPORT_TOUCH 0xd2 + struct surface3_ts_data { struct spi_device *spi; struct gpio_desc *gpiod_rst[2]; @@ -84,19 +86,10 @@ static void surface3_spi_report_touch(struct surface3_ts_data *ts_data, } } -static void surface3_spi_process(struct surface3_ts_data *ts_data) +static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *data) { - const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, - 0x01, 0xd2, 0x00, 0x80, 0x01, 0x03, 0x03}; - u8 *data = ts_data->rd_buf; u16 timestamp; unsigned int i; - - if (memcmp(header, data, sizeof(header))) - dev_err(&ts_data->spi->dev, - "%s header error: %*ph, ignoring...\n", - __func__, (int)sizeof(header), data); - timestamp = get_unaligned_le16(&data[15]); for (i = 0; i < 13; i++) { @@ -121,6 +114,25 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data) input_sync(ts_data->input_dev); } +static void surface3_spi_process(struct surface3_ts_data *ts_data) +{ + const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01}; + + u8 *data = ts_data->rd_buf; + + if (memcmp(header, data, sizeof(header))) + dev_err(&ts_data->spi->dev, + "%s header error: %*ph, ignoring...\n", + __func__, (int)sizeof(header), data); + + if (data[9] == SURFACE3_REPORT_TOUCH) + surface3_spi_process_touch(ts_data, data); + else + dev_err(&ts_data->spi->dev, + "%s unknown packet type: %x, ignoring...\n", + __func__, data[9]); +} + static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id) { struct surface3_ts_data *data = dev_id; @@ -176,7 +188,7 @@ static int surface3_spi_get_gpio_config(struct surface3_ts_data *data) return 0; } -static int surface3_spi_create_input(struct surface3_ts_data *data) +static int surface3_spi_create_touch_input(struct surface3_ts_data *data) { struct input_dev *input; int error; @@ -199,7 +211,7 @@ static int surface3_spi_create_input(struct surface3_ts_data *data) input->phys = "input/ts"; input->id.bustype = BUS_SPI; input->id.vendor = 0x045e; /* Microsoft */ - input->id.product = 0x0000; + input->id.product = 0x0001; input->id.version = 0x0000; error = input_register_device(input); @@ -239,7 +251,7 @@ static int surface3_spi_probe(struct spi_device *spi) surface3_spi_power(data, false); surface3_spi_power(data, true); - error = surface3_spi_create_input(data); + error = surface3_spi_create_touch_input(data); if (error) return error; -- 2.8.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 2/2] Input - surface3_spi: add surface pen support for Surface 3 2016-05-24 13:43 ` [PATCH v2 0/2] Input: surface3_spi: Surface Pen Support Stephen Just 2016-05-24 13:43 ` [PATCH v2 1/2] Input - surface3_spi: Prepare to add support for Surface Pen Stephen Just @ 2016-05-24 13:43 ` Stephen Just 2016-05-25 9:24 ` Benjamin Tissoires 1 sibling, 1 reply; 9+ messages in thread From: Stephen Just @ 2016-05-24 13:43 UTC (permalink / raw) To: linux-input, Dmitry Torokhov, Benjamin Tissoires Cc: Stephen Just, Bastien Nocera This change creates a second input device which will handle input from a Surface Pen. The Surface Pen supplies a different packet header than touch events, so it is simple to handle one or the other. This patch handles both the newer Surface Pen with one button, and the older variant with a second button to switch to Eraser mode. Signed-off-by: Stephen Just <stephenjust@gmail.com> --- drivers/input/touchscreen/surface3_spi.c | 111 ++++++++++++++++++++++++++++++- 1 file changed, 109 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c index 204a162..665b02c 100644 --- a/drivers/input/touchscreen/surface3_spi.c +++ b/drivers/input/touchscreen/surface3_spi.c @@ -28,11 +28,13 @@ #define SURFACE3_PACKET_SIZE 264 #define SURFACE3_REPORT_TOUCH 0xd2 +#define SURFACE3_REPORT_PEN 0x16 struct surface3_ts_data { struct spi_device *spi; struct gpio_desc *gpiod_rst[2]; struct input_dev *input_dev; + struct input_dev *pen_input_dev; u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned; }; @@ -49,6 +51,14 @@ struct surface3_ts_data_finger { u32 padding; } __packed; +struct surface3_ts_data_pen { + u8 status; + __le16 x; + __le16 y; + __le16 pressure; + u8 padding; +} __packed; + static int surface3_spi_read(struct surface3_ts_data *ts_data) { struct spi_device *spi = ts_data->spi; @@ -114,6 +124,52 @@ static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *dat input_sync(ts_data->input_dev); } +static void surface3_spi_report_pen(struct surface3_ts_data *ts_data, + struct surface3_ts_data_pen *pen) +{ + int st = pen->status; + int prox = st & 0x01; + int rubber = st & 0x18; + + input_report_key(ts_data->pen_input_dev, + BTN_TOUCH, + (st & 0x12)); + + input_report_key(ts_data->pen_input_dev, + BTN_TOOL_PEN, + prox && !rubber); + + input_report_key(ts_data->pen_input_dev, + BTN_TOOL_RUBBER, + prox && rubber); + + if (st) { + input_report_key(ts_data->pen_input_dev, + BTN_STYLUS, + st & 0x04); + + input_report_abs(ts_data->pen_input_dev, + ABS_X, + get_unaligned_le16(&pen->x)); + input_report_abs(ts_data->pen_input_dev, + ABS_Y, + get_unaligned_le16(&pen->y)); + input_report_abs(ts_data->pen_input_dev, + ABS_PRESSURE, + get_unaligned_le16(&pen->pressure)); + } +} + +static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data) +{ + struct surface3_ts_data_pen *pen; + + pen = (struct surface3_ts_data_pen *)&data[15]; + + surface3_spi_report_pen(ts_data, pen); + input_sync(ts_data->pen_input_dev); +} + static void surface3_spi_process(struct surface3_ts_data *ts_data) { const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01}; @@ -125,12 +181,19 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data) "%s header error: %*ph, ignoring...\n", __func__, (int)sizeof(header), data); - if (data[9] == SURFACE3_REPORT_TOUCH) + switch (data[9]) { + case SURFACE3_REPORT_TOUCH: surface3_spi_process_touch(ts_data, data); - else + break; + case SURFACE3_REPORT_PEN: + surface3_spi_process_pen(ts_data, data); + break; + default: dev_err(&ts_data->spi->dev, "%s unknown packet type: %x, ignoring...\n", __func__, data[9]); + break; + } } static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id) @@ -224,6 +287,46 @@ static int surface3_spi_create_touch_input(struct surface3_ts_data *data) return 0; } +static int surface3_spi_create_pen_input(struct surface3_ts_data *data) +{ + struct input_dev *input; + int error; + + input = devm_input_allocate_device(&data->spi->dev); + if (!input) + return -ENOMEM; + + data->pen_input_dev = input; + + __set_bit(INPUT_PROP_DIRECT, input->propbit); + __set_bit(INPUT_PROP_POINTER, input->propbit); + input_set_abs_params(input, ABS_X, 0, 9600, 0, 0); + input_abs_set_res(input, ABS_X, 40); + input_set_abs_params(input, ABS_Y, 0, 7200, 0, 0); + input_abs_set_res(input, ABS_Y, 48); + input_set_abs_params(input, ABS_PRESSURE, 0, 1024, 0, 0); + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_STYLUS); + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); + input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER); + + input->name = "Surface3 SPI Pen Input"; + input->phys = "input/ts"; + input->id.bustype = BUS_SPI; + input->id.vendor = 0x045e; /* Microsoft */ + input->id.product = 0x0002; + input->id.version = 0x0000; + + error = input_register_device(input); + if (error) { + dev_err(&data->spi->dev, + "Failed to register input device: %d", error); + return error; + } + + return 0; +} + static int surface3_spi_probe(struct spi_device *spi) { struct surface3_ts_data *data; @@ -255,6 +358,10 @@ static int surface3_spi_probe(struct spi_device *spi) if (error) return error; + error = surface3_spi_create_pen_input(data); + if (error) + return error; + error = devm_request_threaded_irq(&spi->dev, spi->irq, NULL, surface3_spi_irq_handler, IRQF_ONESHOT, -- 2.8.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] Input - surface3_spi: add surface pen support for Surface 3 2016-05-24 13:43 ` [PATCH v2 2/2] Input - surface3_spi: add surface pen support for Surface 3 Stephen Just @ 2016-05-25 9:24 ` Benjamin Tissoires 0 siblings, 0 replies; 9+ messages in thread From: Benjamin Tissoires @ 2016-05-25 9:24 UTC (permalink / raw) To: Stephen Just; +Cc: linux-input, Dmitry Torokhov, Bastien Nocera, Peter Hutterer Hi Stephen, On May 24 2016 or thereabouts, Stephen Just wrote: > This change creates a second input device which will handle input from > a Surface Pen. The Surface Pen supplies a different packet header than > touch events, so it is simple to handle one or the other. > > This patch handles both the newer Surface Pen with one button, and the > older variant with a second button to switch to Eraser mode. > > Signed-off-by: Stephen Just <stephenjust@gmail.com> > --- > drivers/input/touchscreen/surface3_spi.c | 111 ++++++++++++++++++++++++++++++- > 1 file changed, 109 insertions(+), 2 deletions(-) > > diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c > index 204a162..665b02c 100644 > --- a/drivers/input/touchscreen/surface3_spi.c > +++ b/drivers/input/touchscreen/surface3_spi.c > @@ -28,11 +28,13 @@ > #define SURFACE3_PACKET_SIZE 264 > > #define SURFACE3_REPORT_TOUCH 0xd2 > +#define SURFACE3_REPORT_PEN 0x16 > > struct surface3_ts_data { > struct spi_device *spi; > struct gpio_desc *gpiod_rst[2]; > struct input_dev *input_dev; > + struct input_dev *pen_input_dev; > > u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned; > }; > @@ -49,6 +51,14 @@ struct surface3_ts_data_finger { > u32 padding; > } __packed; > > +struct surface3_ts_data_pen { > + u8 status; > + __le16 x; > + __le16 y; > + __le16 pressure; > + u8 padding; > +} __packed; > + > static int surface3_spi_read(struct surface3_ts_data *ts_data) > { > struct spi_device *spi = ts_data->spi; > @@ -114,6 +124,52 @@ static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *dat > input_sync(ts_data->input_dev); > } > > +static void surface3_spi_report_pen(struct surface3_ts_data *ts_data, > + struct surface3_ts_data_pen *pen) > +{ > + int st = pen->status; > + int prox = st & 0x01; > + int rubber = st & 0x18; > + > + input_report_key(ts_data->pen_input_dev, > + BTN_TOUCH, > + (st & 0x12)); > + > + input_report_key(ts_data->pen_input_dev, > + BTN_TOOL_PEN, > + prox && !rubber); > + > + input_report_key(ts_data->pen_input_dev, > + BTN_TOOL_RUBBER, > + prox && rubber); I just had a call with Peter, and I noticed a small issue here (see https://bugs.freedesktop.org/show_bug.cgi?id=96182) On the out of proximity event, we switches back from tool_pen and release the tool_rubber in the very same frame, and this messes things in user space. I first thought it was easier to fix libinput, but this behavior (having a tool in/out prox in its own prox) is the de facto standard and the current stylus (new style) behavior will break xorg-evdev, xorg-wacom and libinput. Would you mind adding a check in the driver if the tool changed and add the input_sync() accordingly? Cheers, Benjamin > + > + if (st) { > + input_report_key(ts_data->pen_input_dev, > + BTN_STYLUS, > + st & 0x04); > + > + input_report_abs(ts_data->pen_input_dev, > + ABS_X, > + get_unaligned_le16(&pen->x)); > + input_report_abs(ts_data->pen_input_dev, > + ABS_Y, > + get_unaligned_le16(&pen->y)); > + input_report_abs(ts_data->pen_input_dev, > + ABS_PRESSURE, > + get_unaligned_le16(&pen->pressure)); > + } > +} > + > +static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data) > +{ > + struct surface3_ts_data_pen *pen; > + > + pen = (struct surface3_ts_data_pen *)&data[15]; > + > + surface3_spi_report_pen(ts_data, pen); > + input_sync(ts_data->pen_input_dev); > +} > + > static void surface3_spi_process(struct surface3_ts_data *ts_data) > { > const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01}; > @@ -125,12 +181,19 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data) > "%s header error: %*ph, ignoring...\n", > __func__, (int)sizeof(header), data); > > - if (data[9] == SURFACE3_REPORT_TOUCH) > + switch (data[9]) { > + case SURFACE3_REPORT_TOUCH: > surface3_spi_process_touch(ts_data, data); > - else > + break; > + case SURFACE3_REPORT_PEN: > + surface3_spi_process_pen(ts_data, data); > + break; > + default: > dev_err(&ts_data->spi->dev, > "%s unknown packet type: %x, ignoring...\n", > __func__, data[9]); > + break; > + } > } > > static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id) > @@ -224,6 +287,46 @@ static int surface3_spi_create_touch_input(struct surface3_ts_data *data) > return 0; > } > > +static int surface3_spi_create_pen_input(struct surface3_ts_data *data) > +{ > + struct input_dev *input; > + int error; > + > + input = devm_input_allocate_device(&data->spi->dev); > + if (!input) > + return -ENOMEM; > + > + data->pen_input_dev = input; > + > + __set_bit(INPUT_PROP_DIRECT, input->propbit); > + __set_bit(INPUT_PROP_POINTER, input->propbit); > + input_set_abs_params(input, ABS_X, 0, 9600, 0, 0); > + input_abs_set_res(input, ABS_X, 40); > + input_set_abs_params(input, ABS_Y, 0, 7200, 0, 0); > + input_abs_set_res(input, ABS_Y, 48); > + input_set_abs_params(input, ABS_PRESSURE, 0, 1024, 0, 0); > + input_set_capability(input, EV_KEY, BTN_TOUCH); > + input_set_capability(input, EV_KEY, BTN_STYLUS); > + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); > + input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER); > + > + input->name = "Surface3 SPI Pen Input"; > + input->phys = "input/ts"; > + input->id.bustype = BUS_SPI; > + input->id.vendor = 0x045e; /* Microsoft */ > + input->id.product = 0x0002; > + input->id.version = 0x0000; > + > + error = input_register_device(input); > + if (error) { > + dev_err(&data->spi->dev, > + "Failed to register input device: %d", error); > + return error; > + } > + > + return 0; > +} > + > static int surface3_spi_probe(struct spi_device *spi) > { > struct surface3_ts_data *data; > @@ -255,6 +358,10 @@ static int surface3_spi_probe(struct spi_device *spi) > if (error) > return error; > > + error = surface3_spi_create_pen_input(data); > + if (error) > + return error; > + > error = devm_request_threaded_irq(&spi->dev, spi->irq, > NULL, surface3_spi_irq_handler, > IRQF_ONESHOT, > -- > 2.8.2 > ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-05-25 9:24 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-05-23 13:55 [PATCH 0/2] Input: surface3_spi: Surface Pen Support Stephen Just 2016-05-23 13:55 ` [PATCH 1/2] Input - surface3_spi: Prepare to add support for Surface Pen Stephen Just 2016-05-23 13:55 ` [PATCH 2/2] Input - surface3_spi: add surface pen support for Surface 3 Stephen Just 2016-05-24 10:05 ` Benjamin Tissoires 2016-05-24 19:15 ` Stephen J 2016-05-24 13:43 ` [PATCH v2 0/2] Input: surface3_spi: Surface Pen Support Stephen Just 2016-05-24 13:43 ` [PATCH v2 1/2] Input - surface3_spi: Prepare to add support for Surface Pen Stephen Just 2016-05-24 13:43 ` [PATCH v2 2/2] Input - surface3_spi: add surface pen support for Surface 3 Stephen Just 2016-05-25 9:24 ` Benjamin Tissoires
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.