From: Carlo Caione <carlo@caione.org> To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH v2 1/2] configs: gxbb: Introduce a common config header file Date: Fri, 10 Jun 2016 20:18:22 +0200 [thread overview] Message-ID: <1465582703-20895-2-git-send-email-carlo@caione.org> (raw) In-Reply-To: <1465582703-20895-1-git-send-email-carlo@caione.org> From: Carlo Caione <carlo@endlessm.com> Introduce a meson-gxbb-common.h header file and derive the configuration for Hardkernel Odroid-C2 board from that. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> --- include/configs/meson-gxbb-common.h | 45 +++++++++++++++++++++++++++++++++++++ include/configs/odroid-c2.h | 34 +--------------------------- 2 files changed, 46 insertions(+), 33 deletions(-) create mode 100644 include/configs/meson-gxbb-common.h diff --git a/include/configs/meson-gxbb-common.h b/include/configs/meson-gxbb-common.h new file mode 100644 index 0000000..d1c0050 --- /dev/null +++ b/include/configs/meson-gxbb-common.h @@ -0,0 +1,45 @@ +/* + * Configuration for Amlogic Meson GXBB SoCs + * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MESON_GXBB_COMMON_CONFIG_H +#define __MESON_GXBB_COMMON_CONFIG_H + +#define CONFIG_CPU_ARMV8 +#define CONFIG_REMAKE_ELF +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_NO_FLASH +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MAXARGS 32 +#define CONFIG_SYS_MALLOC_LEN (32 << 20) +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_MISC_INIT_R + +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_TEXT_BASE 0x01000000 +#define CONFIG_SYS_INIT_SP_ADDR 0x20000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0xc4301000 +#define GICC_BASE 0xc4302000 + +#define CONFIG_CMD_ENV + +/* Monitor Command Prompt */ +/* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING + +#include <config_distro_defaults.h> + +#endif /* __MESON_GXBB_COMMON_CONFIG_H */ diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h index 37a5671..bf5df9c 100644 --- a/include/configs/odroid-c2.h +++ b/include/configs/odroid-c2.h @@ -8,44 +8,12 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_CPU_ARMV8 -#define CONFIG_REMAKE_ELF -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_ENV_IS_NOWHERE 1 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_MALLOC_LEN (32 << 20) -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_TEXT_BASE 0x01000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x20000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE - -/* Generic Interrupt Controller Definitions */ -#define GICD_BASE 0xc4301000 -#define GICC_BASE 0xc4302000 - #define CONFIG_IDENT_STRING " odroid-c2" /* Serial setup */ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 -#define CONFIG_CMD_ENV - -/* Monitor Command Prompt */ -/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -#include <config_distro_defaults.h> +#include <configs/meson-gxbb-common.h> #endif /* __CONFIG_H */ -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: carlo@caione.org (Carlo Caione) To: linus-amlogic@lists.infradead.org Subject: [PATCH v2 1/2] configs: gxbb: Introduce a common config header file Date: Fri, 10 Jun 2016 20:18:22 +0200 [thread overview] Message-ID: <1465582703-20895-2-git-send-email-carlo@caione.org> (raw) In-Reply-To: <1465582703-20895-1-git-send-email-carlo@caione.org> From: Carlo Caione <carlo@endlessm.com> Introduce a meson-gxbb-common.h header file and derive the configuration for Hardkernel Odroid-C2 board from that. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> --- include/configs/meson-gxbb-common.h | 45 +++++++++++++++++++++++++++++++++++++ include/configs/odroid-c2.h | 34 +--------------------------- 2 files changed, 46 insertions(+), 33 deletions(-) create mode 100644 include/configs/meson-gxbb-common.h diff --git a/include/configs/meson-gxbb-common.h b/include/configs/meson-gxbb-common.h new file mode 100644 index 0000000..d1c0050 --- /dev/null +++ b/include/configs/meson-gxbb-common.h @@ -0,0 +1,45 @@ +/* + * Configuration for Amlogic Meson GXBB SoCs + * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MESON_GXBB_COMMON_CONFIG_H +#define __MESON_GXBB_COMMON_CONFIG_H + +#define CONFIG_CPU_ARMV8 +#define CONFIG_REMAKE_ELF +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_NO_FLASH +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MAXARGS 32 +#define CONFIG_SYS_MALLOC_LEN (32 << 20) +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_MISC_INIT_R + +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_TEXT_BASE 0x01000000 +#define CONFIG_SYS_INIT_SP_ADDR 0x20000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0xc4301000 +#define GICC_BASE 0xc4302000 + +#define CONFIG_CMD_ENV + +/* Monitor Command Prompt */ +/* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING + +#include <config_distro_defaults.h> + +#endif /* __MESON_GXBB_COMMON_CONFIG_H */ diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h index 37a5671..bf5df9c 100644 --- a/include/configs/odroid-c2.h +++ b/include/configs/odroid-c2.h @@ -8,44 +8,12 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_CPU_ARMV8 -#define CONFIG_REMAKE_ELF -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_ENV_IS_NOWHERE 1 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_MALLOC_LEN (32 << 20) -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_TEXT_BASE 0x01000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x20000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE - -/* Generic Interrupt Controller Definitions */ -#define GICD_BASE 0xc4301000 -#define GICC_BASE 0xc4302000 - #define CONFIG_IDENT_STRING " odroid-c2" /* Serial setup */ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 -#define CONFIG_CMD_ENV - -/* Monitor Command Prompt */ -/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -#include <config_distro_defaults.h> +#include <configs/meson-gxbb-common.h> #endif /* __CONFIG_H */ -- 2.7.4
next prev parent reply other threads:[~2016-06-10 18:18 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-10 18:18 [U-Boot] [PATCH v2 0/2] Prepare U-Boot for more Amlogic boards Carlo Caione 2016-06-10 18:18 ` Carlo Caione 2016-06-10 18:18 ` Carlo Caione [this message] 2016-06-10 18:18 ` [PATCH v2 1/2] configs: gxbb: Introduce a common config header file Carlo Caione 2016-06-12 21:03 ` [U-Boot] " Beniamino Galvani 2016-06-12 21:03 ` Beniamino Galvani 2016-06-25 2:51 ` [U-Boot] [U-Boot, v2, " Tom Rini 2016-06-25 2:51 ` [U-Boot,v2,1/2] " Tom Rini 2016-06-10 18:18 ` [U-Boot] [PATCH v2 2/2] board: amlogic: Rename folder for Amlogic boards Carlo Caione 2016-06-10 18:18 ` Carlo Caione 2016-06-12 21:05 ` [U-Boot] " Beniamino Galvani 2016-06-12 21:05 ` Beniamino Galvani 2016-06-25 2:52 ` [U-Boot] [U-Boot, v2, " Tom Rini 2016-06-25 2:52 ` [U-Boot,v2,2/2] " Tom Rini 2016-06-24 21:01 ` [U-Boot] [PATCH v2 0/2] Prepare U-Boot for more " Carlo Caione 2016-06-24 21:01 ` Carlo Caione 2016-06-24 21:11 ` [U-Boot] " Tom Rini 2016-06-24 21:11 ` Tom Rini
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1465582703-20895-2-git-send-email-carlo@caione.org \ --to=carlo@caione.org \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.