* [PATCH v4 1/4] USB: Fix of_usb_get_dr_mode_by_phy with a shared phy block
2016-06-10 19:02 ` Hans de Goede
@ 2016-06-10 19:02 ` Hans de Goede
-1 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2016-06-10 19:02 UTC (permalink / raw)
To: Bin Liu, Greg Kroah-Hartman, Kishon Vijay Abraham I
Cc: Maxime Ripard, Chen-Yu Tsai, linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
Hans de Goede
Some SoCs have a single phy-hw-block with multiple phys, this is
modelled by a single phy dts node, so we end up with multiple
controller nodes with a phys property pointing to the phy-node
of the otg-phy.
Only one of these controllers typically is an otg controller, yet we
were checking the first controller who uses a phy from the block and
then end up looking for a dr_mode property in e.g. the ehci controller.
This commit fixes this by adding an arg0 parameter to
of_usb_get_dr_mode_by_phy and make of_usb_get_dr_mode_by_phy
check that this matches the phandle args[0] value when looking for
the otg controller.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2:
-Add a arg0 parameter instead of looking for nodes with a dr_mode property
Changes in v3:
-No changes
Changes in v4:
-When arg0 == -1, use of_parse_phandle instead of of_parse_phandle_with_args
because using of_parse_phandle_with_args breaks phy's which use the usb-phy
bindings instead of the generic phy bindings
---
drivers/usb/common/common.c | 26 ++++++++++++++++++++------
drivers/usb/phy/phy-am335x.c | 2 +-
include/linux/usb/of.h | 4 ++--
3 files changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index e3d0161..5ef8da6 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -131,15 +131,17 @@ EXPORT_SYMBOL_GPL(usb_get_dr_mode);
* of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
* which is associated with the given phy device_node
* @np: Pointer to the given phy device_node
+ * @arg0: phandle args[0] for phy's with #phy-cells >= 1, or -1 for
+ * phys which do not have phy-cells
*
* In dts a usb controller associates with phy devices. The function gets
* the string from property 'dr_mode' of the controller associated with the
* given phy device node, and returns the correspondig enum usb_dr_mode.
*/
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
{
struct device_node *controller = NULL;
- struct device_node *phy;
+ struct of_phandle_args args;
const char *dr_mode;
int index;
int err;
@@ -148,12 +150,24 @@ enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
controller = of_find_node_with_property(controller, "phys");
index = 0;
do {
- phy = of_parse_phandle(controller, "phys", index);
- of_node_put(phy);
- if (phy == phy_np)
+ if (arg0 == -1) {
+ args.np = of_parse_phandle(controller, "phys",
+ index);
+ args.args_count = 0;
+ } else {
+ err = of_parse_phandle_with_args(controller,
+ "phys", "#phy-cells",
+ index, &args);
+ if (err)
+ break;
+ }
+
+ of_node_put(args.np);
+ if (args.np == np && (args.args_count == 0 ||
+ args.args[0] == arg0))
goto finish;
index++;
- } while (phy);
+ } while (args.np);
} while (controller);
finish:
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index a262a43..7e5aece 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -54,7 +54,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
return am_phy->id;
}
- am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node);
+ am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
if (ret)
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index de3237f..5ff9032 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -12,7 +12,7 @@
#include <linux/usb/phy.h>
#if IS_ENABLED(CONFIG_OF)
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np);
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0);
bool of_usb_host_tpl_support(struct device_node *np);
int of_usb_update_otg_caps(struct device_node *np,
struct usb_otg_caps *otg_caps);
@@ -20,7 +20,7 @@ struct device_node *usb_of_get_child_node(struct device_node *parent,
int portnum);
#else
static inline enum usb_dr_mode
-of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
{
return USB_DR_MODE_UNKNOWN;
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 1/4] USB: Fix of_usb_get_dr_mode_by_phy with a shared phy block
@ 2016-06-10 19:02 ` Hans de Goede
0 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2016-06-10 19:02 UTC (permalink / raw)
To: linux-arm-kernel
Some SoCs have a single phy-hw-block with multiple phys, this is
modelled by a single phy dts node, so we end up with multiple
controller nodes with a phys property pointing to the phy-node
of the otg-phy.
Only one of these controllers typically is an otg controller, yet we
were checking the first controller who uses a phy from the block and
then end up looking for a dr_mode property in e.g. the ehci controller.
This commit fixes this by adding an arg0 parameter to
of_usb_get_dr_mode_by_phy and make of_usb_get_dr_mode_by_phy
check that this matches the phandle args[0] value when looking for
the otg controller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Add a arg0 parameter instead of looking for nodes with a dr_mode property
Changes in v3:
-No changes
Changes in v4:
-When arg0 == -1, use of_parse_phandle instead of of_parse_phandle_with_args
because using of_parse_phandle_with_args breaks phy's which use the usb-phy
bindings instead of the generic phy bindings
---
drivers/usb/common/common.c | 26 ++++++++++++++++++++------
drivers/usb/phy/phy-am335x.c | 2 +-
include/linux/usb/of.h | 4 ++--
3 files changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index e3d0161..5ef8da6 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -131,15 +131,17 @@ EXPORT_SYMBOL_GPL(usb_get_dr_mode);
* of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
* which is associated with the given phy device_node
* @np: Pointer to the given phy device_node
+ * @arg0: phandle args[0] for phy's with #phy-cells >= 1, or -1 for
+ * phys which do not have phy-cells
*
* In dts a usb controller associates with phy devices. The function gets
* the string from property 'dr_mode' of the controller associated with the
* given phy device node, and returns the correspondig enum usb_dr_mode.
*/
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
{
struct device_node *controller = NULL;
- struct device_node *phy;
+ struct of_phandle_args args;
const char *dr_mode;
int index;
int err;
@@ -148,12 +150,24 @@ enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
controller = of_find_node_with_property(controller, "phys");
index = 0;
do {
- phy = of_parse_phandle(controller, "phys", index);
- of_node_put(phy);
- if (phy == phy_np)
+ if (arg0 == -1) {
+ args.np = of_parse_phandle(controller, "phys",
+ index);
+ args.args_count = 0;
+ } else {
+ err = of_parse_phandle_with_args(controller,
+ "phys", "#phy-cells",
+ index, &args);
+ if (err)
+ break;
+ }
+
+ of_node_put(args.np);
+ if (args.np == np && (args.args_count == 0 ||
+ args.args[0] == arg0))
goto finish;
index++;
- } while (phy);
+ } while (args.np);
} while (controller);
finish:
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index a262a43..7e5aece 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -54,7 +54,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
return am_phy->id;
}
- am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node);
+ am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
if (ret)
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index de3237f..5ff9032 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -12,7 +12,7 @@
#include <linux/usb/phy.h>
#if IS_ENABLED(CONFIG_OF)
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np);
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0);
bool of_usb_host_tpl_support(struct device_node *np);
int of_usb_update_otg_caps(struct device_node *np,
struct usb_otg_caps *otg_caps);
@@ -20,7 +20,7 @@ struct device_node *usb_of_get_child_node(struct device_node *parent,
int portnum);
#else
static inline enum usb_dr_mode
-of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
{
return USB_DR_MODE_UNKNOWN;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 2/4] phy-sun4i-usb: Add support for peripheral-only mode
2016-06-10 19:02 ` Hans de Goede
@ 2016-06-10 19:02 ` Hans de Goede
-1 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2016-06-10 19:02 UTC (permalink / raw)
To: Bin Liu, Greg Kroah-Hartman, Kishon Vijay Abraham I
Cc: Maxime Ripard, Chen-Yu Tsai, linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
Hans de Goede
Use the new of_usb_get_dr_mode_by_phy() function to get the dr_mode
from the musb controller node instead of assuming that having an id_det
gpio means otg mode, and not having one means host mode.
Implement peripheral-only mode by adding a sun4i_usb_phy0_get_id_det
helper which looks at the dr_mode, always registering our extcon and
always monitoring vbus.
If dr_mode is not specified in the dts, do not register phy0 as we then
do not know how to treat it. This is actually a good thing as this means
we will not be registering phy0 on devices where the otg controller is
not enabled in the devicetree.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2:
-Adjust for of_usb_get_dr_mode_by_phy now taking an args0 parameter
Changes in v3:
-Only toggle the phy vbus-det bit on id-change on systems without vbus-det
when in otg mode
Changes in v4:
-No changes
---
drivers/phy/phy-sun4i-usb.c | 68 ++++++++++++++++++++++++++++++---------------
1 file changed, 46 insertions(+), 22 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index bae54f7..e3cbaae 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -40,6 +40,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include <linux/usb/of.h>
#include <linux/workqueue.h>
#define REG_ISCR 0x00
@@ -109,6 +110,7 @@ struct sun4i_usb_phy_cfg {
struct sun4i_usb_phy_data {
void __iomem *base;
const struct sun4i_usb_phy_cfg *cfg;
+ enum usb_dr_mode dr_mode;
struct mutex mutex;
struct sun4i_usb_phy {
struct phy *phy;
@@ -119,6 +121,7 @@ struct sun4i_usb_phy_data {
bool regulator_on;
int index;
} phys[MAX_PHYS];
+ int first_phy;
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
@@ -285,16 +288,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN);
sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN);
- if (data->id_det_gpio) {
- /* OTG mode, force ISCR and cable state updates */
- data->id_det = -1;
- data->vbus_det = -1;
- queue_delayed_work(system_wq, &data->detect, 0);
- } else {
- /* Host only mode */
- sun4i_usb_phy0_set_id_detect(_phy, 0);
- sun4i_usb_phy0_set_vbus_detect(_phy, 1);
- }
+ /* Force ISCR and cable state updates */
+ data->id_det = -1;
+ data->vbus_det = -1;
+ queue_delayed_work(system_wq, &data->detect, 0);
}
return 0;
@@ -319,6 +316,19 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
return 0;
}
+static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
+{
+ switch (data->dr_mode) {
+ case USB_DR_MODE_OTG:
+ return gpiod_get_value_cansleep(data->id_det_gpio);
+ case USB_DR_MODE_HOST:
+ return 0;
+ case USB_DR_MODE_PERIPHERAL:
+ default:
+ return 1;
+ }
+}
+
static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data)
{
if (data->vbus_det_gpio)
@@ -414,7 +424,10 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
struct phy *phy0 = data->phys[0].phy;
int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
- id_det = gpiod_get_value_cansleep(data->id_det_gpio);
+ if (phy0 == NULL)
+ return;
+
+ id_det = sun4i_usb_phy0_get_id_det(data);
vbus_det = sun4i_usb_phy0_get_vbus_det(data);
mutex_lock(&phy0->mutex);
@@ -430,7 +443,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
* without vbus detection report vbus low for long enough for
* the musb-ip to end the current device session.
*/
- if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
+ if (data->dr_mode == USB_DR_MODE_OTG &&
+ !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(200);
sun4i_usb_phy0_set_vbus_detect(phy0, 1);
@@ -456,7 +470,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
* without vbus detection report vbus low for long enough to
* the musb-ip to end the current host session.
*/
- if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
+ if (data->dr_mode == USB_DR_MODE_OTG &&
+ !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
mutex_lock(&phy0->mutex);
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(1000);
@@ -501,7 +516,8 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
- if (args->args[0] >= data->cfg->num_phys)
+ if (args->args[0] < data->first_phy ||
+ args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@@ -575,13 +591,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- /* vbus_det without id_det makes no sense, and is not supported */
- if (sun4i_usb_phy0_have_vbus_det(data) && !data->id_det_gpio) {
- dev_err(dev, "usb0_id_det missing or invalid\n");
- return -ENODEV;
- }
-
- if (data->id_det_gpio) {
+ data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
+ switch (data->dr_mode) {
+ case USB_DR_MODE_OTG:
+ /* otg without id_det makes no sense, and is not supported */
+ if (!data->id_det_gpio) {
+ dev_err(dev, "usb0_id_det missing or invalid\n");
+ return -ENODEV;
+ }
+ /* fall through */
+ case USB_DR_MODE_HOST:
+ case USB_DR_MODE_PERIPHERAL:
data->extcon = devm_extcon_dev_allocate(dev,
sun4i_usb_phy0_cable);
if (IS_ERR(data->extcon))
@@ -592,9 +612,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
dev_err(dev, "failed to register extcon: %d\n", ret);
return ret;
}
+ break;
+ default:
+ dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
+ data->first_phy = 1;
}
- for (i = 0; i < data->cfg->num_phys; i++) {
+ for (i = data->first_phy; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 2/4] phy-sun4i-usb: Add support for peripheral-only mode
@ 2016-06-10 19:02 ` Hans de Goede
0 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2016-06-10 19:02 UTC (permalink / raw)
To: linux-arm-kernel
Use the new of_usb_get_dr_mode_by_phy() function to get the dr_mode
from the musb controller node instead of assuming that having an id_det
gpio means otg mode, and not having one means host mode.
Implement peripheral-only mode by adding a sun4i_usb_phy0_get_id_det
helper which looks at the dr_mode, always registering our extcon and
always monitoring vbus.
If dr_mode is not specified in the dts, do not register phy0 as we then
do not know how to treat it. This is actually a good thing as this means
we will not be registering phy0 on devices where the otg controller is
not enabled in the devicetree.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Adjust for of_usb_get_dr_mode_by_phy now taking an args0 parameter
Changes in v3:
-Only toggle the phy vbus-det bit on id-change on systems without vbus-det
when in otg mode
Changes in v4:
-No changes
---
drivers/phy/phy-sun4i-usb.c | 68 ++++++++++++++++++++++++++++++---------------
1 file changed, 46 insertions(+), 22 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index bae54f7..e3cbaae 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -40,6 +40,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include <linux/usb/of.h>
#include <linux/workqueue.h>
#define REG_ISCR 0x00
@@ -109,6 +110,7 @@ struct sun4i_usb_phy_cfg {
struct sun4i_usb_phy_data {
void __iomem *base;
const struct sun4i_usb_phy_cfg *cfg;
+ enum usb_dr_mode dr_mode;
struct mutex mutex;
struct sun4i_usb_phy {
struct phy *phy;
@@ -119,6 +121,7 @@ struct sun4i_usb_phy_data {
bool regulator_on;
int index;
} phys[MAX_PHYS];
+ int first_phy;
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
@@ -285,16 +288,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN);
sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN);
- if (data->id_det_gpio) {
- /* OTG mode, force ISCR and cable state updates */
- data->id_det = -1;
- data->vbus_det = -1;
- queue_delayed_work(system_wq, &data->detect, 0);
- } else {
- /* Host only mode */
- sun4i_usb_phy0_set_id_detect(_phy, 0);
- sun4i_usb_phy0_set_vbus_detect(_phy, 1);
- }
+ /* Force ISCR and cable state updates */
+ data->id_det = -1;
+ data->vbus_det = -1;
+ queue_delayed_work(system_wq, &data->detect, 0);
}
return 0;
@@ -319,6 +316,19 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
return 0;
}
+static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
+{
+ switch (data->dr_mode) {
+ case USB_DR_MODE_OTG:
+ return gpiod_get_value_cansleep(data->id_det_gpio);
+ case USB_DR_MODE_HOST:
+ return 0;
+ case USB_DR_MODE_PERIPHERAL:
+ default:
+ return 1;
+ }
+}
+
static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data)
{
if (data->vbus_det_gpio)
@@ -414,7 +424,10 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
struct phy *phy0 = data->phys[0].phy;
int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
- id_det = gpiod_get_value_cansleep(data->id_det_gpio);
+ if (phy0 == NULL)
+ return;
+
+ id_det = sun4i_usb_phy0_get_id_det(data);
vbus_det = sun4i_usb_phy0_get_vbus_det(data);
mutex_lock(&phy0->mutex);
@@ -430,7 +443,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
* without vbus detection report vbus low for long enough for
* the musb-ip to end the current device session.
*/
- if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
+ if (data->dr_mode == USB_DR_MODE_OTG &&
+ !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(200);
sun4i_usb_phy0_set_vbus_detect(phy0, 1);
@@ -456,7 +470,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
* without vbus detection report vbus low for long enough to
* the musb-ip to end the current host session.
*/
- if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
+ if (data->dr_mode == USB_DR_MODE_OTG &&
+ !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
mutex_lock(&phy0->mutex);
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(1000);
@@ -501,7 +516,8 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
- if (args->args[0] >= data->cfg->num_phys)
+ if (args->args[0] < data->first_phy ||
+ args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@@ -575,13 +591,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- /* vbus_det without id_det makes no sense, and is not supported */
- if (sun4i_usb_phy0_have_vbus_det(data) && !data->id_det_gpio) {
- dev_err(dev, "usb0_id_det missing or invalid\n");
- return -ENODEV;
- }
-
- if (data->id_det_gpio) {
+ data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
+ switch (data->dr_mode) {
+ case USB_DR_MODE_OTG:
+ /* otg without id_det makes no sense, and is not supported */
+ if (!data->id_det_gpio) {
+ dev_err(dev, "usb0_id_det missing or invalid\n");
+ return -ENODEV;
+ }
+ /* fall through */
+ case USB_DR_MODE_HOST:
+ case USB_DR_MODE_PERIPHERAL:
data->extcon = devm_extcon_dev_allocate(dev,
sun4i_usb_phy0_cable);
if (IS_ERR(data->extcon))
@@ -592,9 +612,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
dev_err(dev, "failed to register extcon: %d\n", ret);
return ret;
}
+ break;
+ default:
+ dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
+ data->first_phy = 1;
}
- for (i = 0; i < data->cfg->num_phys; i++) {
+ for (i = data->first_phy; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 3/4] phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31
2016-06-10 19:02 ` Hans de Goede
@ 2016-06-10 19:02 ` Hans de Goede
-1 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2016-06-10 19:02 UTC (permalink / raw)
To: Bin Liu, Greg Kroah-Hartman, Kishon Vijay Abraham I
Cc: Maxime Ripard, Chen-Yu Tsai, linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
Hans de Goede
The A31 companion pmic (axp221) does not generate vbus change interrupts
when the board is driving vbus, so we must poll when using the pmic for
vbus-det _and_ we're driving vbus.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2:
-No changes
Changes in v3:
-No changes
Changes in v4:
-No changes
---
drivers/phy/phy-sun4i-usb.c | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index e3cbaae..a7abae6 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -95,6 +95,7 @@
enum sun4i_usb_phy_type {
sun4i_a10_phy,
+ sun6i_a31_phy,
sun8i_a33_phy,
sun8i_h3_phy,
};
@@ -125,7 +126,6 @@ struct sun4i_usb_phy_data {
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
- bool phy0_poll;
struct gpio_desc *id_det_gpio;
struct gpio_desc *vbus_det_gpio;
struct power_supply *vbus_power_supply;
@@ -353,6 +353,24 @@ static bool sun4i_usb_phy0_have_vbus_det(struct sun4i_usb_phy_data *data)
return data->vbus_det_gpio || data->vbus_power_supply;
}
+static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
+{
+ if ((data->id_det_gpio && data->id_det_irq < 0) ||
+ (data->vbus_det_gpio && data->vbus_det_irq < 0))
+ return true;
+
+ /*
+ * The A31 companion pmic (axp221) does not generate vbus change
+ * interrupts when the board is driving vbus, so we must poll
+ * when using the pmic for vbus-det _and_ we're driving vbus.
+ */
+ if (data->cfg->type == sun6i_a31_phy &&
+ data->vbus_power_supply && data->phys[0].regulator_on)
+ return true;
+
+ return false;
+}
+
static int sun4i_usb_phy_power_on(struct phy *_phy)
{
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
@@ -374,7 +392,7 @@ static int sun4i_usb_phy_power_on(struct phy *_phy)
phy->regulator_on = true;
/* We must report Vbus high within OTG_TIME_A_WAIT_VRISE msec. */
- if (phy->index == 0 && data->vbus_det_gpio && data->phy0_poll)
+ if (phy->index == 0 && sun4i_usb_phy0_poll(data))
mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
return 0;
@@ -395,7 +413,7 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
* phy0 vbus typically slowly discharges, sometimes this causes the
* Vbus gpio to not trigger an edge irq on Vbus off, so force a rescan.
*/
- if (phy->index == 0 && data->vbus_det_gpio && !data->phy0_poll)
+ if (phy->index == 0 && !sun4i_usb_phy0_poll(data))
mod_delayed_work(system_wq, &data->detect, POLL_TIME);
return 0;
@@ -483,7 +501,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
if (vbus_notify)
extcon_set_cable_state_(data->extcon, EXTCON_USB, vbus_det);
- if (data->phy0_poll)
+ if (sun4i_usb_phy0_poll(data))
queue_delayed_work(system_wq, &data->detect, POLL_TIME);
}
@@ -668,11 +686,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
}
data->id_det_irq = gpiod_to_irq(data->id_det_gpio);
- data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio);
- if ((data->id_det_gpio && data->id_det_irq < 0) ||
- (data->vbus_det_gpio && data->vbus_det_irq < 0))
- data->phy0_poll = true;
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 3/4] phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31
@ 2016-06-10 19:02 ` Hans de Goede
0 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2016-06-10 19:02 UTC (permalink / raw)
To: linux-arm-kernel
The A31 companion pmic (axp221) does not generate vbus change interrupts
when the board is driving vbus, so we must poll when using the pmic for
vbus-det _and_ we're driving vbus.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-No changes
Changes in v3:
-No changes
Changes in v4:
-No changes
---
drivers/phy/phy-sun4i-usb.c | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index e3cbaae..a7abae6 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -95,6 +95,7 @@
enum sun4i_usb_phy_type {
sun4i_a10_phy,
+ sun6i_a31_phy,
sun8i_a33_phy,
sun8i_h3_phy,
};
@@ -125,7 +126,6 @@ struct sun4i_usb_phy_data {
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
- bool phy0_poll;
struct gpio_desc *id_det_gpio;
struct gpio_desc *vbus_det_gpio;
struct power_supply *vbus_power_supply;
@@ -353,6 +353,24 @@ static bool sun4i_usb_phy0_have_vbus_det(struct sun4i_usb_phy_data *data)
return data->vbus_det_gpio || data->vbus_power_supply;
}
+static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
+{
+ if ((data->id_det_gpio && data->id_det_irq < 0) ||
+ (data->vbus_det_gpio && data->vbus_det_irq < 0))
+ return true;
+
+ /*
+ * The A31 companion pmic (axp221) does not generate vbus change
+ * interrupts when the board is driving vbus, so we must poll
+ * when using the pmic for vbus-det _and_ we're driving vbus.
+ */
+ if (data->cfg->type == sun6i_a31_phy &&
+ data->vbus_power_supply && data->phys[0].regulator_on)
+ return true;
+
+ return false;
+}
+
static int sun4i_usb_phy_power_on(struct phy *_phy)
{
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
@@ -374,7 +392,7 @@ static int sun4i_usb_phy_power_on(struct phy *_phy)
phy->regulator_on = true;
/* We must report Vbus high within OTG_TIME_A_WAIT_VRISE msec. */
- if (phy->index == 0 && data->vbus_det_gpio && data->phy0_poll)
+ if (phy->index == 0 && sun4i_usb_phy0_poll(data))
mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);
return 0;
@@ -395,7 +413,7 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
* phy0 vbus typically slowly discharges, sometimes this causes the
* Vbus gpio to not trigger an edge irq on Vbus off, so force a rescan.
*/
- if (phy->index == 0 && data->vbus_det_gpio && !data->phy0_poll)
+ if (phy->index == 0 && !sun4i_usb_phy0_poll(data))
mod_delayed_work(system_wq, &data->detect, POLL_TIME);
return 0;
@@ -483,7 +501,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
if (vbus_notify)
extcon_set_cable_state_(data->extcon, EXTCON_USB, vbus_det);
- if (data->phy0_poll)
+ if (sun4i_usb_phy0_poll(data))
queue_delayed_work(system_wq, &data->detect, POLL_TIME);
}
@@ -668,11 +686,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
}
data->id_det_irq = gpiod_to_irq(data->id_det_gpio);
- data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio);
- if ((data->id_det_gpio && data->id_det_irq < 0) ||
- (data->vbus_det_gpio && data->vbus_det_irq < 0))
- data->phy0_poll = true;
-
if (data->id_det_irq >= 0) {
ret = devm_request_irq(dev, data->id_det_irq,
sun4i_usb_phy0_id_vbus_det_irq,
@@ -684,6 +697,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
}
}
+ data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio);
if (data->vbus_det_irq >= 0) {
ret = devm_request_irq(dev, data->vbus_det_irq,
sun4i_usb_phy0_id_vbus_det_irq,
@@ -735,7 +749,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.num_phys = 3,
- .type = sun4i_a10_phy,
+ .type = sun6i_a31_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 4/4] usb: musb: sunxi: Simplify dr_mode handling
2016-06-10 19:02 ` Hans de Goede
@ 2016-06-10 19:02 ` Hans de Goede
-1 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2016-06-10 19:02 UTC (permalink / raw)
To: Bin Liu, Greg Kroah-Hartman, Kishon Vijay Abraham I
Cc: Maxime Ripard, Chen-Yu Tsai, linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
Hans de Goede
phy-sun4i-usb now has proper dr_mode handling, it always registers an
extcon, and sends a notify with the mode (even when in peripheral- /
host-only mode) at least once.
So we can simply the sunxi musb glue by always registering its extcon
notifier and relying on sunxi_musb_work() to enable vbus when in
host-only mode.
This also enables host- and peripheral-only mode with vbus monitoring.
Tested-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Acked-by: Bin Liu <b-liu-l0cyMroinI0@public.gmane.org>
---
Changes in v2:
-No changes
Changes in v3:
-No changes
Changes in v4:
-Add Maxime's Tested-by
-Add Bin Liu's Acked-by
---
drivers/usb/musb/sunxi.c | 68 ++++++++++++++++++------------------------------
1 file changed, 25 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 7650051..a17eb2a 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -256,12 +256,10 @@ static int sunxi_musb_init(struct musb *musb)
writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0);
/* Register notifier before calling phy_init() */
- if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) {
- ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
- &glue->host_nb);
- if (ret)
- goto error_reset_assert;
- }
+ ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
+ &glue->host_nb);
+ if (ret)
+ goto error_reset_assert;
ret = phy_init(glue->phy);
if (ret)
@@ -275,9 +273,8 @@ static int sunxi_musb_init(struct musb *musb)
return 0;
error_unregister_notifier:
- if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
- extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
- &glue->host_nb);
+ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
+ &glue->host_nb);
error_reset_assert:
if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
reset_control_assert(glue->rst);
@@ -301,9 +298,8 @@ static int sunxi_musb_exit(struct musb *musb)
phy_exit(glue->phy);
- if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
- extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
- &glue->host_nb);
+ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
+ &glue->host_nb);
if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
reset_control_assert(glue->rst);
@@ -315,25 +311,6 @@ static int sunxi_musb_exit(struct musb *musb)
return 0;
}
-static int sunxi_set_mode(struct musb *musb, u8 mode)
-{
- struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
- int ret;
-
- if (mode == MUSB_HOST) {
- ret = phy_power_on(glue->phy);
- if (ret)
- return ret;
-
- set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
- /* Stop musb work from turning vbus off again */
- set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
- }
-
- return 0;
-}
-
static void sunxi_musb_enable(struct musb *musb)
{
struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
@@ -582,7 +559,6 @@ static const struct musb_platform_ops sunxi_musb_ops = {
.exit = sunxi_musb_exit,
.enable = sunxi_musb_enable,
.disable = sunxi_musb_disable,
- .set_mode = sunxi_set_mode,
.fifo_offset = sunxi_musb_fifo_offset,
.ep_offset = sunxi_musb_ep_offset,
.busctl_offset = sunxi_musb_busctl_offset,
@@ -638,10 +614,6 @@ static int sunxi_musb_probe(struct platform_device *pdev)
return -EINVAL;
}
- glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
- if (!glue)
- return -ENOMEM;
-
memset(&pdata, 0, sizeof(pdata));
switch (usb_get_dr_mode(&pdev->dev)) {
#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
@@ -649,15 +621,13 @@ static int sunxi_musb_probe(struct platform_device *pdev)
pdata.mode = MUSB_PORT_MODE_HOST;
break;
#endif
+#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET
+ case USB_DR_MODE_PERIPHERAL:
+ pdata.mode = MUSB_PORT_MODE_GADGET;
+ break;
+#endif
#ifdef CONFIG_USB_MUSB_DUAL_ROLE
case USB_DR_MODE_OTG:
- glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
- if (IS_ERR(glue->extcon)) {
- if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- dev_err(&pdev->dev, "Invalid or missing extcon\n");
- return PTR_ERR(glue->extcon);
- }
pdata.mode = MUSB_PORT_MODE_DUAL_ROLE;
break;
#endif
@@ -668,6 +638,10 @@ static int sunxi_musb_probe(struct platform_device *pdev)
pdata.platform_ops = &sunxi_musb_ops;
pdata.config = &sunxi_musb_hdrc_config;
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
+
glue->dev = &pdev->dev;
INIT_WORK(&glue->work, sunxi_musb_work);
glue->host_nb.notifier_call = sunxi_musb_host_notifier;
@@ -701,6 +675,14 @@ static int sunxi_musb_probe(struct platform_device *pdev)
}
}
+ glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
+ if (IS_ERR(glue->extcon)) {
+ if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "Invalid or missing extcon\n");
+ return PTR_ERR(glue->extcon);
+ }
+
glue->phy = devm_phy_get(&pdev->dev, "usb");
if (IS_ERR(glue->phy)) {
if (PTR_ERR(glue->phy) == -EPROBE_DEFER)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 4/4] usb: musb: sunxi: Simplify dr_mode handling
@ 2016-06-10 19:02 ` Hans de Goede
0 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2016-06-10 19:02 UTC (permalink / raw)
To: linux-arm-kernel
phy-sun4i-usb now has proper dr_mode handling, it always registers an
extcon, and sends a notify with the mode (even when in peripheral- /
host-only mode) at least once.
So we can simply the sunxi musb glue by always registering its extcon
notifier and relying on sunxi_musb_work() to enable vbus when in
host-only mode.
This also enables host- and peripheral-only mode with vbus monitoring.
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Bin Liu <b-liu@ti.com>
---
Changes in v2:
-No changes
Changes in v3:
-No changes
Changes in v4:
-Add Maxime's Tested-by
-Add Bin Liu's Acked-by
---
drivers/usb/musb/sunxi.c | 68 ++++++++++++++++++------------------------------
1 file changed, 25 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 7650051..a17eb2a 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -256,12 +256,10 @@ static int sunxi_musb_init(struct musb *musb)
writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0);
/* Register notifier before calling phy_init() */
- if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) {
- ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
- &glue->host_nb);
- if (ret)
- goto error_reset_assert;
- }
+ ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
+ &glue->host_nb);
+ if (ret)
+ goto error_reset_assert;
ret = phy_init(glue->phy);
if (ret)
@@ -275,9 +273,8 @@ static int sunxi_musb_init(struct musb *musb)
return 0;
error_unregister_notifier:
- if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
- extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
- &glue->host_nb);
+ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
+ &glue->host_nb);
error_reset_assert:
if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
reset_control_assert(glue->rst);
@@ -301,9 +298,8 @@ static int sunxi_musb_exit(struct musb *musb)
phy_exit(glue->phy);
- if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
- extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
- &glue->host_nb);
+ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
+ &glue->host_nb);
if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
reset_control_assert(glue->rst);
@@ -315,25 +311,6 @@ static int sunxi_musb_exit(struct musb *musb)
return 0;
}
-static int sunxi_set_mode(struct musb *musb, u8 mode)
-{
- struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
- int ret;
-
- if (mode == MUSB_HOST) {
- ret = phy_power_on(glue->phy);
- if (ret)
- return ret;
-
- set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
- /* Stop musb work from turning vbus off again */
- set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
- }
-
- return 0;
-}
-
static void sunxi_musb_enable(struct musb *musb)
{
struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
@@ -582,7 +559,6 @@ static const struct musb_platform_ops sunxi_musb_ops = {
.exit = sunxi_musb_exit,
.enable = sunxi_musb_enable,
.disable = sunxi_musb_disable,
- .set_mode = sunxi_set_mode,
.fifo_offset = sunxi_musb_fifo_offset,
.ep_offset = sunxi_musb_ep_offset,
.busctl_offset = sunxi_musb_busctl_offset,
@@ -638,10 +614,6 @@ static int sunxi_musb_probe(struct platform_device *pdev)
return -EINVAL;
}
- glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
- if (!glue)
- return -ENOMEM;
-
memset(&pdata, 0, sizeof(pdata));
switch (usb_get_dr_mode(&pdev->dev)) {
#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
@@ -649,15 +621,13 @@ static int sunxi_musb_probe(struct platform_device *pdev)
pdata.mode = MUSB_PORT_MODE_HOST;
break;
#endif
+#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET
+ case USB_DR_MODE_PERIPHERAL:
+ pdata.mode = MUSB_PORT_MODE_GADGET;
+ break;
+#endif
#ifdef CONFIG_USB_MUSB_DUAL_ROLE
case USB_DR_MODE_OTG:
- glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
- if (IS_ERR(glue->extcon)) {
- if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- dev_err(&pdev->dev, "Invalid or missing extcon\n");
- return PTR_ERR(glue->extcon);
- }
pdata.mode = MUSB_PORT_MODE_DUAL_ROLE;
break;
#endif
@@ -668,6 +638,10 @@ static int sunxi_musb_probe(struct platform_device *pdev)
pdata.platform_ops = &sunxi_musb_ops;
pdata.config = &sunxi_musb_hdrc_config;
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
+
glue->dev = &pdev->dev;
INIT_WORK(&glue->work, sunxi_musb_work);
glue->host_nb.notifier_call = sunxi_musb_host_notifier;
@@ -701,6 +675,14 @@ static int sunxi_musb_probe(struct platform_device *pdev)
}
}
+ glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
+ if (IS_ERR(glue->extcon)) {
+ if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "Invalid or missing extcon\n");
+ return PTR_ERR(glue->extcon);
+ }
+
glue->phy = devm_phy_get(&pdev->dev, "usb");
if (IS_ERR(glue->phy)) {
if (PTR_ERR(glue->phy) == -EPROBE_DEFER)
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread