From: Janusz Krzysztofik <jmkrzyszt@gmail.com> To: Russell King <linux@armlinux.org.uk>, Tony Lindgren <tony@atomide.com> Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Janusz Krzysztofik <jmkrzyszt@gmail.com> Subject: [PATCH] arm: omap1: fix ams-delta FIQ handler to work with sparse IRQ Date: Thu, 16 Jun 2016 21:56:30 +0200 [thread overview] Message-ID: <1466106990-9556-1-git-send-email-jmkrzyszt@gmail.com> (raw) After OMAP1 IRQ definitions have been changed by commit 685e2d08c54b ("ARM: OMAP1: Change interrupt numbering for sparse IRQ") introduced in v4.2, ams-delta FIQ handler which depends on them no longer works as expected. Fix it. Created and tested on Amstrad Delta against Linux-4.7-rc3 Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> --- arch/arm/mach-omap1/ams-delta-fiq-handler.S | 6 +++--- arch/arm/mach-omap1/ams-delta-fiq.c | 5 +++-- arch/arm/mach-omap1/include/mach/ams-delta-fiq.h | 2 ++ 3 files changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 5d7fb59..bf60844 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -43,8 +43,8 @@ #define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK) /* IRQ handler register bitmasks */ -#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE)) -#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1) +#define DEFERRED_FIQ_MASK OMAP_IRQ_BIT(INT_DEFERRED_FIQ) +#define GPIO_BANK1_MASK OMAP_IRQ_BIT(INT_GPIO_BANK1) /* Driver buffer byte offsets */ #define BUF_MASK (FIQ_MASK * 4) @@ -110,7 +110,7 @@ ENTRY(qwerty_fiqin_start) mov r8, #2 @ reset FIQ agreement str r8, [r12, #IRQ_CONTROL_REG_OFFSET] - cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt? + cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY) @ is it GPIO interrupt? beq gpio @ yes - process it mov r8, #1 diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index d1f1209..ec760ae 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -109,7 +109,8 @@ void __init ams_delta_init_fiq(void) * Since no set_type() method is provided by OMAP irq chip, * switch to edge triggered interrupt type manually. */ - offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4; + offset = IRQ_ILR0_REG_OFFSET + + ((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4; val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1); omap_writel(val, DEFERRED_FIQ_IH_BASE + offset); @@ -149,7 +150,7 @@ void __init ams_delta_init_fiq(void) /* * Redirect GPIO interrupts to FIQ */ - offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4; + offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4; val = omap_readl(OMAP_IH1_BASE + offset) | 1; omap_writel(val, OMAP_IH1_BASE + offset); } diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index adb5e76..6dfc3e1 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -14,6 +14,8 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H +#include <mach/irqs.h> + /* * Interrupt number used for passing control from FIQ to IRQ. * IRQ12, described as reserved, has been selected. -- 2.7.3
WARNING: multiple messages have this Message-ID (diff)
From: jmkrzyszt@gmail.com (Janusz Krzysztofik) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] arm: omap1: fix ams-delta FIQ handler to work with sparse IRQ Date: Thu, 16 Jun 2016 21:56:30 +0200 [thread overview] Message-ID: <1466106990-9556-1-git-send-email-jmkrzyszt@gmail.com> (raw) After OMAP1 IRQ definitions have been changed by commit 685e2d08c54b ("ARM: OMAP1: Change interrupt numbering for sparse IRQ") introduced in v4.2, ams-delta FIQ handler which depends on them no longer works as expected. Fix it. Created and tested on Amstrad Delta against Linux-4.7-rc3 Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> --- arch/arm/mach-omap1/ams-delta-fiq-handler.S | 6 +++--- arch/arm/mach-omap1/ams-delta-fiq.c | 5 +++-- arch/arm/mach-omap1/include/mach/ams-delta-fiq.h | 2 ++ 3 files changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 5d7fb59..bf60844 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -43,8 +43,8 @@ #define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK) /* IRQ handler register bitmasks */ -#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE)) -#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1) +#define DEFERRED_FIQ_MASK OMAP_IRQ_BIT(INT_DEFERRED_FIQ) +#define GPIO_BANK1_MASK OMAP_IRQ_BIT(INT_GPIO_BANK1) /* Driver buffer byte offsets */ #define BUF_MASK (FIQ_MASK * 4) @@ -110,7 +110,7 @@ ENTRY(qwerty_fiqin_start) mov r8, #2 @ reset FIQ agreement str r8, [r12, #IRQ_CONTROL_REG_OFFSET] - cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt? + cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY) @ is it GPIO interrupt? beq gpio @ yes - process it mov r8, #1 diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index d1f1209..ec760ae 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -109,7 +109,8 @@ void __init ams_delta_init_fiq(void) * Since no set_type() method is provided by OMAP irq chip, * switch to edge triggered interrupt type manually. */ - offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4; + offset = IRQ_ILR0_REG_OFFSET + + ((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4; val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1); omap_writel(val, DEFERRED_FIQ_IH_BASE + offset); @@ -149,7 +150,7 @@ void __init ams_delta_init_fiq(void) /* * Redirect GPIO interrupts to FIQ */ - offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4; + offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4; val = omap_readl(OMAP_IH1_BASE + offset) | 1; omap_writel(val, OMAP_IH1_BASE + offset); } diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index adb5e76..6dfc3e1 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -14,6 +14,8 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H +#include <mach/irqs.h> + /* * Interrupt number used for passing control from FIQ to IRQ. * IRQ12, described as reserved, has been selected. -- 2.7.3
next reply other threads:[~2016-06-16 19:56 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-16 19:56 Janusz Krzysztofik [this message] 2016-06-16 19:56 ` [PATCH] arm: omap1: fix ams-delta FIQ handler to work with sparse IRQ Janusz Krzysztofik 2016-06-17 9:39 ` Tony Lindgren 2016-06-17 9:39 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1466106990-9556-1-git-send-email-jmkrzyszt@gmail.com \ --to=jmkrzyszt@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.