* [meta-fsl-ppc][PATCH 01/13] remove not supported e500v2 machines
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 02/13] u-boot-qoriq: upgrade to 2016.01 ting.liu
` (12 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Remove the below machines which are not supported/tested:
bsc9131rdb, bsc9132qds, p1010rdb, p1020rdb, p1021rdb, p1022ds
p1023rdb, p1025twr, p2020rdb
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/bsc9131rdb.conf | 20 --------------------
conf/machine/bsc9132qds.conf | 32 --------------------------------
conf/machine/p1010rdb.conf | 29 -----------------------------
conf/machine/p1020rdb.conf | 20 --------------------
conf/machine/p1021rdb.conf | 27 ---------------------------
conf/machine/p1022ds.conf | 36 ------------------------------------
conf/machine/p1023rdb.conf | 18 ------------------
conf/machine/p1025twr.conf | 20 --------------------
conf/machine/p2020rdb.conf | 24 ------------------------
9 files changed, 226 deletions(-)
delete mode 100644 conf/machine/bsc9131rdb.conf
delete mode 100644 conf/machine/bsc9132qds.conf
delete mode 100644 conf/machine/p1010rdb.conf
delete mode 100644 conf/machine/p1020rdb.conf
delete mode 100644 conf/machine/p1021rdb.conf
delete mode 100644 conf/machine/p1022ds.conf
delete mode 100644 conf/machine/p1023rdb.conf
delete mode 100644 conf/machine/p1025twr.conf
delete mode 100644 conf/machine/p2020rdb.conf
diff --git a/conf/machine/bsc9131rdb.conf b/conf/machine/bsc9131rdb.conf
deleted file mode 100644
index c40f492..0000000
--- a/conf/machine/bsc9131rdb.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-#@TYPE: Machine
-#@NAME: Freescale BSC9131RDB
-#@SOC: bsc9131
-#@DESCRIPTION: Machine configuration for Freescale QorIQ Qonverge BSC9131
-# Reference Design Board with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "bsc9131"
-UBOOT_CONFIG ??= "nand nand-sysclk100 spi spi-sysclk100"
-UBOOT_CONFIG[nand] = "BSC9131RDB_NAND_config"
-UBOOT_CONFIG[nand-sysclk100] = "BSC9131RDB_NAND_SYSCLK100_config"
-UBOOT_CONFIG[spi] = "BSC9131RDB_SPIFLASH_config"
-UBOOT_CONFIG[spi-sysclk100] = "BSC9131RDB_SPIFLASH_SYSCLK100_config"
-
-KERNEL_DEVICETREE ?= "bsc9131rdb.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/85xx/bsc913x_defconfig"
-
-JFFS2_ERASEBLOCK = "0x10000"
diff --git a/conf/machine/bsc9132qds.conf b/conf/machine/bsc9132qds.conf
deleted file mode 100644
index 48545bc..0000000
--- a/conf/machine/bsc9132qds.conf
+++ /dev/null
@@ -1,32 +0,0 @@
-#@TYPE: Machine
-#@NAME: Freescale BSC9132QDS
-#@SOC: bsc9132
-#@DESCRIPTION: Machine configuration for Freescale QorIQ Qonverge BSC9132
-# Qonverge Development System with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "bsc9132"
-UBOOT_CONFIG ??= "nand-ddrclk133 nand-ddrclk100 nor-ddrclk100 nor-ddrclk133 sdcard-ddrclk100 sdcard-ddrclk133 spi-ddrclk100 spi-ddrclk133 nand-ddrclk100-secure nand-ddrclk133-secure nor-ddrclk100-secure nor-ddrclk133-secure sdcard-ddrclk100-secure sdcard-ddrclk133-secure spi-ddrclk100-secure spi-ddrclk133-secure"
-UBOOT_CONFIG[nand-ddrclk133] = "BSC9132QDS_NAND_DDRCLK133_config"
-UBOOT_CONFIG[nand-ddrclk100] = "BSC9132QDS_NAND_DDRCLK100_config"
-UBOOT_CONFIG[nor-ddrclk100] = "BSC9132QDS_NOR_DDRCLK100_config"
-UBOOT_CONFIG[nor-ddrclk133] = "BSC9132QDS_NOR_DDRCLK133_config"
-UBOOT_CONFIG[sdcard-ddrclk100] = "BSC9132QDS_SDCARD_DDRCLK100_config"
-UBOOT_CONFIG[sdcard-ddrclk133] = "BSC9132QDS_SDCARD_DDRCLK133_config"
-UBOOT_CONFIG[spi-ddrclk100] = "BSC9132QDS_SPIFLASH_DDRCLK100_config"
-UBOOT_CONFIG[spi-ddrclk133] = "BSC9132QDS_SPIFLASH_DDRCLK133_config"
-UBOOT_CONFIG[nand-ddrclk100-secure] = "BSC9132QDS_NAND_DDRCLK100_SECURE_config"
-UBOOT_CONFIG[nand-ddrclk133-secure] = "BSC9132QDS_NAND_DDRCLK133_SECURE_config"
-UBOOT_CONFIG[nor-ddrclk100-secure] = "BSC9132QDS_NOR_DDRCLK100_SECURE_config"
-UBOOT_CONFIG[nor-ddrclk133-secure] = "BSC9132QDS_NOR_DDRCLK133_SECURE_config"
-UBOOT_CONFIG[sdcard-ddrclk100-secure] = "BSC9132QDS_SDCARD_DDRCLK100_SECURE_config"
-UBOOT_CONFIG[sdcard-ddrclk133-secure] = "BSC9132QDS_SDCARD_DDRCLK133_SECURE_config"
-UBOOT_CONFIG[spi-ddrclk100-secure] = "BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_config"
-UBOOT_CONFIG[spi-ddrclk133-secure] = "BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_config"
-
-KERNEL_DEVICETREE ?= "bsc9132qds.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/85xx/bsc913x_smp_defconfig"
-
-JFFS2_ERASEBLOCK = "0x10000"
diff --git a/conf/machine/p1010rdb.conf b/conf/machine/p1010rdb.conf
deleted file mode 100644
index abb4076..0000000
--- a/conf/machine/p1010rdb.conf
+++ /dev/null
@@ -1,29 +0,0 @@
-#@TYPE: Machine
-#@Name: Freescale P1010RDB
-#@SOC: p1010
-#@DESCRIPTION: Machine configuration for Freescale QorIQ P1010 Reference
-# Design Board with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "p1010"
-BOOTFORMAT_CONFIG = "config_sram_p1010rdb.dat"
-UBOOT_CONFIG ??= "nand spi 36bit-nor 36bit-nand 36bit-spi 36bit-nand-secboot 36bit-nor-secboot 36bit-spi-secboot nand-secboot nor-secboot spi-secboot nor"
-UBOOT_CONFIG[nor] = "P1010RDB-PB_NOR_config"
-UBOOT_CONFIG[nand] = "P1010RDB-PB_NAND_config"
-UBOOT_CONFIG[spi] = "P1010RDB-PB_SPIFLASH_config"
-UBOOT_CONFIG[36bit-nor] = "P1010RDB-PB_36BIT_NOR_config"
-UBOOT_CONFIG[36bit-nand] = "P1010RDB-PB_36BIT_NAND_config"
-UBOOT_CONFIG[36bit-spi] = "P1010RDB-PB_36BIT_SPIFLASH_config"
-UBOOT_CONFIG[36bit-nand-secboot] = "P1010RDB-PB_36BIT_NAND_SECBOOT_config"
-UBOOT_CONFIG[36bit-nor-secboot] = "P1010RDB-PB_36BIT_NOR_SECBOOT_config"
-UBOOT_CONFIG[36bit-spi-secboot] = "P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_config"
-UBOOT_CONFIG[nand-secboot] = "P1010RDB-PB_NAND_SECBOOT_config"
-UBOOT_CONFIG[nor-secboot] = "P1010RDB-PB_NOR_SECBOOT_config"
-UBOOT_CONFIG[spi-secboot] = "P1010RDB-PB_SPIFLASH_SECBOOT_config"
-
-KERNEL_DEVICETREE ?= "p1010rdb-pa.dtb p1010rdb-pb.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/mpc85xx_defconfig"
-
-JFFS2_ERASEBLOCK = "0x20000"
diff --git a/conf/machine/p1020rdb.conf b/conf/machine/p1020rdb.conf
deleted file mode 100644
index adfa02f..0000000
--- a/conf/machine/p1020rdb.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-#@TYPE: Machine
-#@NAME: Freescale P1020RDB
-#@SOC: p1020
-#@DESCRIPTION: Machine configuration for Freescale QorIQ P1020 Reference
-# Design Board, revD with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "p1020"
-BOOTFORMAT_CONFIG = "config_sram_p1022ds.dat"
-UBOOT_CONFIG ??= "nand sdcard spi nor"
-UBOOT_CONFIG[nor] = "P1020RDB-PD_config"
-UBOOT_CONFIG[nand] = "P1020RDB-PD_NAND_config"
-UBOOT_CONFIG[sdcard] = "P1020RDB-PD_SDCARD_config"
-UBOOT_CONFIG[spi] = "P1020RDB-PD_SPIFLASH_config"
-KERNEL_DEVICETREE ?= "p1020rdb-pd_32b.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
-
-JFFS2_ERASEBLOCK = "0x20000"
diff --git a/conf/machine/p1021rdb.conf b/conf/machine/p1021rdb.conf
deleted file mode 100644
index f587d46..0000000
--- a/conf/machine/p1021rdb.conf
+++ /dev/null
@@ -1,27 +0,0 @@
-#@TYPE: Machine
-#@Name: Freescale P1021RDB
-#@SOC: p1021
-#@DESCRIPTION: Machine configuration for Freescale QorIQ P1021 Reference
-# Design Board, revC with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "p1021"
-BOOTFORMAT_CONFIG = "config_sram_p1022ds.dat"
-UBOOT_CONFIG ??= "nand sdcard spi 36bit-nor 36bit-spi 36bit-nand 36bit-sdcard nor"
-UBOOT_CONFIG[nor] = "P1021RDB-PC_config"
-UBOOT_CONFIG[nand] = "P1021RDB-PC_NAND_config"
-UBOOT_CONFIG[sdcard] = "P1021RDB-PC_SDCARD_config"
-UBOOT_CONFIG[spi] = "P1021RDB-PC_SPIFLASH_config"
-UBOOT_CONFIG[36bit-nor] = "P1021RDB-PC_36BIT_config"
-UBOOT_CONFIG[36bit-spi] = "P1021RDB-PC_36BIT_SPIFLASH_config"
-UBOOT_CONFIG[36bit-nand] = "P1021RDB-PC_36BIT_NAND_config"
-UBOOT_CONFIG[36bit-sdcard] = "P1021RDB-PC_36BIT_SDCARD_config"
-
-KERNEL_DEVICETREE ?= "p1021rdb-pc_32b.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
-
-JFFS2_ERASEBLOCK = "0x20000"
-QE_UCODE ?= "fsl_qe_ucode_1021_10_A.bin"
-EXTRA_IMAGEDEPENDS += "qe-ucode"
diff --git a/conf/machine/p1022ds.conf b/conf/machine/p1022ds.conf
deleted file mode 100644
index 8c7dcf6..0000000
--- a/conf/machine/p1022ds.conf
+++ /dev/null
@@ -1,36 +0,0 @@
-#@TYPE: Machine
-#@NAME: Freescale P1022DS
-#@SOC: p1022
-#@DESCRIPTION: Machine configuration for Freescale QorIQ P1022 Development
-# System, revB with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "p1022"
-BOOTFORMAT_CONFIG = "config_sram_p1022ds.dat"
-
-UBOOT_CONFIG ??= "nand spi sdcard 36bit-nor 36bit-spi 36bit-nand 36bit-sdcard nor"
-UBOOT_CONFIG[nor] = "P1022DS_config"
-UBOOT_CONFIG[nand] = "P1022DS_NAND_config"
-UBOOT_CONFIG[spi] = "P1022DS_SPIFLASH_config"
-UBOOT_CONFIG[sdcard] = "P1022DS_SDCARD_config"
-UBOOT_CONFIG[36bit-nor] = "P1022DS_36BIT_config"
-UBOOT_CONFIG[36bit-spi] = "P1022DS_36BIT_SPIFLASH_config"
-UBOOT_CONFIG[36bit-nand] = "P1022DS_36BIT_NAND_config"
-UBOOT_CONFIG[36bit-sdcard] = "P1022DS_36BIT_SDCARD_config"
-
-KERNEL_DEVICETREE ?= "p1022ds_32b.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
-
-PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
-
-XSERVER = " \
- xserver-xorg \
- xf86-input-evdev \
- xf86-input-mouse \
- xf86-input-keyboard \
- xf86-video-fbdev \
-"
-
-JFFS2_ERASEBLOCK = "0x20000"
diff --git a/conf/machine/p1023rdb.conf b/conf/machine/p1023rdb.conf
deleted file mode 100644
index af93d1e..0000000
--- a/conf/machine/p1023rdb.conf
+++ /dev/null
@@ -1,18 +0,0 @@
-#@TYPE: Machine
-#@NAME: Freescale P1023RDB
-#@SOC: p1023
-#@DESCRIPTION: Machine configuration for Freescale QorIQ P1023 Reference
-# Design Board, revA with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "p1023"
-UBOOT_CONFIG ??= "nor"
-UBOOT_CONFIG[nor] = "P1023RDB_config"
-KERNEL_DEVICETREE ?= "p1023rdb.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/85xx/p1023_defconfig"
-
-JFFS2_ERASEBLOCK = "0x10000"
-
-EXTRA_IMAGEDEPENDS += "fm-ucode"
diff --git a/conf/machine/p1025twr.conf b/conf/machine/p1025twr.conf
deleted file mode 100644
index 8e7e7ab..0000000
--- a/conf/machine/p1025twr.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-#@TYPE: Machine
-#@Name: Freescale P1025TWR
-#@SOC: p1025
-#@DESCRIPTION: Machine configuration for Freescale QorIQ P1025 MPU Tower
-# System Module with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "p1025"
-BOOTFORMAT_CONFIG = "config_ddr3_1gb_p1_p2_rdb_pc_667M.dat"
-UBOOT_CONFIG ??= "nor"
-UBOOT_CONFIG[nor] = "TWR-P1025_config"
-KERNEL_DEVICETREE ?= "p1025twr_32b.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
-
-JFFS2_ERASEBLOCK = "0x20000"
-QE_UCODE ?= "fsl_qe_ucode_1021_10_A.bin"
-
-EXTRA_IMAGEDEPENDS += "qe-ucode"
diff --git a/conf/machine/p2020rdb.conf b/conf/machine/p2020rdb.conf
deleted file mode 100644
index 3621031..0000000
--- a/conf/machine/p2020rdb.conf
+++ /dev/null
@@ -1,24 +0,0 @@
-#@TYPE: Machine
-#@Name: Freescale P2020RDB
-#@SOC: p2020
-#@DESCRIPTION: Machine configuration for Freescale QorIQ P2020 Reference
-# Design Board with ppce500v2 core
-#@MAINTAINER: Chunrong Guo <B40290@freescale.com>
-
-require conf/machine/include/e500v2.inc
-
-SOC_FAMILY = "p2020"
-BOOTFORMAT_CONFIG = "config_sram_p1022ds.dat"
-UBOOT_CONFIG ??= "nand sdcard spi 36bit-nor 36bit-spi 36bit-nand 36bit-sdcard nor"
-UBOOT_CONFIG[nor] = "P2020RDB-PC_config"
-UBOOT_CONFIG[nand] = "P2020RDB-PC_NAND_config"
-UBOOT_CONFIG[sdcard] = "P2020RDB-PC_SDCARD_config"
-UBOOT_CONFIG[spi] = "P2020RDB-PC_SPIFLASH_config"
-UBOOT_CONFIG[36bit-nor] = "P2020RDB-PC_36BIT_config"
-UBOOT_CONFIG[36bit-spi] = "P2020RDB-PC_36BIT_SPIFLASH_config"
-UBOOT_CONFIG[36bit-nand] = "P2020RDB-PC_36BIT_NAND_config"
-UBOOT_CONFIG[36bit-sdcard] = "P2020RDB-PC_36BIT_SDCARD_config"
-KERNEL_DEVICETREE ?= "p2020rdb-pc_32b.dtb"
-KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
-
-JFFS2_ERASEBLOCK = "0x20000"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 02/13] u-boot-qoriq: upgrade to 2016.01
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 01/13] remove not supported e500v2 machines ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 03/13] u-boot-qoriq: switch to new UBOOT_CONFIG format ting.liu
` (11 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
The main features are:
* Upgrade to 2016.01
* On ARM platforms, the U-Boot image includes the device tree
* Non-secure and Secure Boot (ESBC)
* Primary Protected Application (PPA) firmware integration [LS1043A]
* Clock, CPLD, DUART, DDR3, DDR4, DSPI, eSDHC, GIC-400, GIC-500, I2C, OCRAM, PCIe, USB 2 & 3, SATA, UART
* Networking support using eTSEC, FMAN Independent Mode or DPAA2 networking
* DCU, eMMC 4.5, I2C3, LPUART, QSPI [LS1021A]
* eLBC and IFC access to NOR and NAND flash
* Boot from NOR, NAND flash, eSPI, SDHC
* Boot from SRIO [B4860, P5020, P4080]
* Voltage ID (board specific)
* CodeWarrior debug patch for U-Boot
Detailed commit log can be found at:
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/log/?h=sdk-v2.0.x
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
...5xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch | 77 ------------------
.../u-boot/files/Fix-the-depend-race-issue.patch | 38 ---------
.../files/add-fgnu89-inline-option-for-gcc5.patch | 39 ----------
recipes-bsp/u-boot/files/gcc5.patch | 91 ----------------------
...ot-qoriq_2015.01.bb => u-boot-qoriq_2016.01.bb} | 6 +-
5 files changed, 2 insertions(+), 249 deletions(-)
delete mode 100644 recipes-bsp/u-boot/files/0001-u-boot-mpc85xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch
delete mode 100644 recipes-bsp/u-boot/files/Fix-the-depend-race-issue.patch
delete mode 100644 recipes-bsp/u-boot/files/add-fgnu89-inline-option-for-gcc5.patch
delete mode 100644 recipes-bsp/u-boot/files/gcc5.patch
rename recipes-bsp/u-boot/{u-boot-qoriq_2015.01.bb => u-boot-qoriq_2016.01.bb} (97%)
diff --git a/recipes-bsp/u-boot/files/0001-u-boot-mpc85xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch b/recipes-bsp/u-boot/files/0001-u-boot-mpc85xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch
deleted file mode 100644
index e6b8d2e..0000000
--- a/recipes-bsp/u-boot/files/0001-u-boot-mpc85xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 9ba002f1b1afc7af84a352f4ecab32a30d7ba353 Mon Sep 17 00:00:00 2001
-From: Zhenhua Luo <zhenhua.luo@freescale.com>
-Date: Mon, 9 Feb 2015 18:33:56 +0800
-Subject: [PATCH] u-boot/mpc85xx/u-boot*.lds: remove _GLOBAL_OFFSET_TABLE_
- definition
-
-In binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbols defined by PROVIDE in
-u-boot.lds overrides the linker built-in symbols
-(https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=b893397a4b1316610f49819344817715e4305de9),
-so the linker is treating _GLOBAL_OFFSET_TABLE_ as a definition into the .reloc section.
-
-To align with the change of binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbol
-should not be defined in sections, and the symbols in linker generated .got
-section should be used(https://sourceware.org/ml/binutils/2008-09/msg00122.html).
-
-Fixed the following build errors with binutils-2.25:
-| powerpc-poky-linux-gnuspe-ld.bfd: _GLOBAL_OFFSET_TABLE_ not defined in linker created .got
-
-Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
----
- arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 1 -
- arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds | 1 -
- arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 1 -
- arch/powerpc/cpu/mpc85xx/u-boot.lds | 1 -
- 4 files changed, 4 deletions(-)
-
-diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
-index f933b21..0399f93 100644
---- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
-+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
-@@ -44,7 +44,6 @@ SECTIONS
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
-- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
-diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
-index b83c553..f044564 100644
---- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
-+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
-@@ -22,7 +22,6 @@ SECTIONS
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
-- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
-diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
-index 5ae7b3e..889a4c2 100644
---- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
-+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
-@@ -29,7 +29,6 @@ SECTIONS
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
-- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
-diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds
-index 2cf0b25..f15eaf3 100644
---- a/arch/powerpc/cpu/mpc85xx/u-boot.lds
-+++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds
-@@ -50,7 +50,6 @@ SECTIONS
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
-- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
---
-2.1.0
-
diff --git a/recipes-bsp/u-boot/files/Fix-the-depend-race-issue.patch b/recipes-bsp/u-boot/files/Fix-the-depend-race-issue.patch
deleted file mode 100644
index 1ddc667..0000000
--- a/recipes-bsp/u-boot/files/Fix-the-depend-race-issue.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Upstream-Status: Pending
-
-From 301832414369b749918e0d5db850eed19b81c0fc Mon Sep 17 00:00:00 2001
-From: Zhenhua Luo <zhenhua.luo@freescale.com>
-Date: Tue, 24 Sep 2013 00:54:40 -0500
-Subject: [PATCH] Fix the depend race issue
-
-| make[3]: Entering directory `/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-fsl-ppc/build/build/tmp/work/p1022ds-poky-linux-gnuspe/u-boot/git-r30/git/arch/powerpc/cpu/mpc85xx'
-| /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-fsl-ppc/build/build/tmp/work/p1022ds-poky-linux-gnuspe/u-boot/git-r30/git/P1022DS_NAND/spl/arch/powerpc/cpu/mpc85xx/.depend:125: *** missing separator. Stop.
-| make[3]: Leaving directory `/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-fsl-ppc/build/build/tmp/work/p1022ds-poky-linux-gnuspe/u-boot/git-r30/git/arch/powerpc/cpu/mpc85xx'
-| make[2]: *** [/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-fsl-ppc/build/build/tmp/work/p1022ds-poky-linux-gnuspe/u-boot/git-r30/git/P1022DS_NAND/spl/arch/powerpc/cpu/mpc85xx/start.o] Error 2
-| make[2]: *** Waiting for unfinished jobs....
-
-Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
----
- spl/Makefile | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
-diff --git a/spl/Makefile b/spl/Makefile
-index 6dbb105..3156d87 100644
---- a/spl/Makefile
-+++ b/spl/Makefile
-@@ -185,7 +185,11 @@ $(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS)))
- $(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@
-
--depend: $(obj).depend
-+# Explicitly make _depend in subdirs containing multiple targets to prevent
-+# parallel sub-makes creating .depend files simultaneously.
-+depend dep: $(obj).depend
-+ for dir in $(SUBDIRS) $(CPUDIR) $(LDSCRIPT_MAKEFILE_DIR) ; do \
-+ $(MAKE) -C $(SRCTREE)/$$dir _depend ; done
- .PHONY: depend
-
- # defines $(obj).depend target
---
-1.8.2.1
-
diff --git a/recipes-bsp/u-boot/files/add-fgnu89-inline-option-for-gcc5.patch b/recipes-bsp/u-boot/files/add-fgnu89-inline-option-for-gcc5.patch
deleted file mode 100644
index cfe1c07..0000000
--- a/recipes-bsp/u-boot/files/add-fgnu89-inline-option-for-gcc5.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Upstream-Status: Pending
-
-From 4d4fcfc41288134b48b72ac69702f68741d7631f Mon Sep 17 00:00:00 2001
-From: Ting Liu <ting.liu@freescale.com>
-Date: Tue, 28 Jul 2015 16:29:26 +0800
-Subject: [PATCH] add -fgnu89-inline option for gcc5
-
-Fix the below build issues:
- CC drivers/crypto/fsl/sec.o
- LD arch/powerpc/cpu/mpc8xxx/built-in.o
-arch/powerpc/cpu/mpc8xxx/fdt.o: In function `ld_le16':
-../arch/powerpc/include/asm/byteorder.h:12: multiple definition of `ld_le16'
-
-The problem is the change of the default C standard from gnu89 to gnu11
-which changes the semantics of 'inline'. The issue is described in the
-Porting guide at https://gcc.gnu.org/gcc-5/porting_to.html. Adding the
-'-fgnu89-inline' option fixes the issue.
-
-Signed-off-by: Ting Liu <ting.liu@freescale.com>
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 9995e00..00497cc 100644
---- a/Makefile
-+++ b/Makefile
-@@ -349,7 +349,7 @@ CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-
- KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
-
--KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
-+KBUILD_CFLAGS := -fgnu89-inline -Wall -Wstrict-prototypes \
- -Wno-format-security \
- -fno-builtin -ffreestanding
- KBUILD_AFLAGS := -D__ASSEMBLY__
---
-1.9.2
-
diff --git a/recipes-bsp/u-boot/files/gcc5.patch b/recipes-bsp/u-boot/files/gcc5.patch
deleted file mode 100644
index 12db94c..0000000
--- a/recipes-bsp/u-boot/files/gcc5.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-Upstream-Status: Backport
-
-From 478b02f1a7043b673565075ea5016376f3293b23 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 7 Feb 2015 22:52:40 +0100
-Subject: [PATCH] Add linux/compiler-gcc5.h to fix builds with gcc5
-
-Add linux/compiler-gcc5/h from the kernel sources at:
-
-commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
-Author: Steven Noonan <steven@uplinklabs.net>
-Date: Sat Oct 25 15:09:42 2014 -0700
-
- compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 65 insertions(+)
- create mode 100644 include/linux/compiler-gcc5.h
-
-Index: git/include/linux/compiler-gcc5.h
-===================================================================
---- /dev/null
-+++ git/include/linux/compiler-gcc5.h
-@@ -0,0 +1,65 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ in the preprocessor, but we can live with this because they're unreleased.
-+ Maketime probing would be overkill here.
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased. Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb b/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
similarity index 97%
rename from recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb
rename to recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
index 4a89b30..55e5700 100644
--- a/recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb
+++ b/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
@@ -21,12 +21,10 @@ DEPENDS_append_qoriq-ppc = " boot-format-native"
inherit deploy
-SRC_URI = "git://git.freescale.com/ppc/sdk/u-boot.git;branch=sdk-v1.9.x \
- file://gcc5.patch \
- file://add-fgnu89-inline-option-for-gcc5.patch \
+SRC_URI = "git://git.freescale.com/ppc/sdk/u-boot.git;branch=sdk-v2.0.x \
file://fix-build-error-under-gcc6.patch \
"
-SRCREV = "eb3d4fc5759729d7af71ac31ebf6a7e8d0e79da3"
+SRCREV = "a9b437f50e2051f8d42ec9e1a6df52de4bc00e1e"
python () {
if d.getVar("TCMODE", True) == "external-fsl":
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 03/13] u-boot-qoriq: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 01/13] remove not supported e500v2 machines ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 02/13] u-boot-qoriq: upgrade to 2016.01 ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 04/13] u-boot-qoriq: sync with u-boot.inc from poky ting.liu
` (10 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
By using the new UBOOT_CONFIG format, the final u-boot binary will be
configured in machine config file, and will be processed in upstream
u-boot.inc.
Remove the codes to copy final u-boot binary, and append the special
steps which need boot-format tool.
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb | 53 +++++++-----------------------
1 file changed, 12 insertions(+), 41 deletions(-)
diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb b/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
index 55e5700..d43a4a6 100644
--- a/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
+++ b/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
@@ -55,52 +55,23 @@ LOCALVERSION = "+fsl"
EXTRA_OEMAKE = 'CROSS_COMPILE=${WRAP_TARGET_PREFIX} CC="${WRAP_TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}"'
do_compile_append_qoriq-ppc () {
- # some board's final nand/spi/sdcard binary was not named as u-boot.bin
unset i j
- if [ "x${UBOOT_CONFIG}" != "x" ]; then
+ if [ -n "${UBOOT_CONFIG}" ];then
for config in ${UBOOT_MACHINE}; do
i=`expr $i + 1`;
- UBOOT_SOURCE=${UBOOT_BINARY}
- if echo ${config} |egrep -v "SECBOOT|SECURE" |egrep -qi "SDCARD|SPIFLASH|NAND"; then
- if echo ${config} |egrep -qi "NAND";then
- if echo ${config} |egrep -qi "^(BSC|C29|P10|P2020RDB)";then
- UBOOT_SOURCE=u-boot-with-spl.bin
- elif echo ${config} |egrep -qi "^(B4|T1|T2|T4)";then
- UBOOT_SOURCE=u-boot-with-spl-pbl.bin
- elif echo ${config} |egrep -qi "^(P2041|P3|P4|P5)";then
- UBOOT_SOURCE=u-boot.pbl
- fi
- elif echo ${config} |egrep -qi "SPIFLASH";then
- if echo ${config} |egrep -qi "^(P10|P2020RDB)";then
- UBOOT_SOURCE=u-boot-with-spl.bin
- elif echo ${config} |egrep -qi "^(T1|T2)";then
- UBOOT_SOURCE=u-boot-with-spl-pbl.bin
- elif echo ${config} |egrep -qi "^(B4|P2041|P3|P4|P5|T4)";then
- UBOOT_SOURCE=u-boot.pbl
- fi
- elif echo ${config} |egrep -qi "SDCARD";then
- if echo ${config} |egrep -qi "^(P10|P2020RDB)";then
- UBOOT_SOURCE=u-boot-with-spl.bin
- elif echo ${config} |egrep -qi "^(B4|T1|T2|T4)";then
- UBOOT_SOURCE=u-boot-with-spl-pbl.bin
- elif echo ${config} |egrep -qi "^(P2041|P3|P4|P5)";then
- UBOOT_SOURCE=u-boot.pbl
- fi
- fi
- for type in ${UBOOT_CONFIG}; do
- j=`expr $j + 1`;
- if [ $j -eq $i ]; then
- cp ${S}/${config}/${UBOOT_SOURCE} ${S}/${config}/u-boot-${type}.${UBOOT_SUFFIX}
- # use boot-format to regenerate spi image if BOOTFORMAT_CONFIG is not empty
- if echo ${config} |egrep -qi "SPIFLASH" && [ -n "${BOOTFORMAT_CONFIG}" ];then
- ${STAGING_BINDIR_NATIVE}/boot_format \
+ for type in ${UBOOT_CONFIG}; do
+ j=`expr $j + 1`;
+ if [ $j -eq $i ]; then
+ # use boot-format to regenerate spi image if BOOTFORMAT_CONFIG is not empty
+ if [ -n "${BOOTFORMAT_CONFIG}" ] && echo "${type}" |grep -q spi;then
+ ${STAGING_BINDIR_NATIVE}/boot_format \
${STAGING_DATADIR_NATIVE}/boot_format/${BOOTFORMAT_CONFIG} \
- ${S}/${config}/${UBOOT_SOURCE} -spi ${S}/${config}/u-boot-${type}.${UBOOT_SUFFIX}
- fi
+ ${config}/u-boot-${type}.${UBOOT_SUFFIX} -spi ${config}/u-boot.format.bin
+ cp ${config}/u-boot.format.bin ${config}/u-boot-${type}.${UBOOT_SUFFIX}
fi
- done
- unset j
- fi
+ fi
+ done
+ unset j
done
unset i
fi
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 04/13] u-boot-qoriq: sync with u-boot.inc from poky
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (2 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 03/13] u-boot-qoriq: switch to new UBOOT_CONFIG format ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 05/13] p2041rdb: switch to new UBOOT_CONFIG format ting.liu
` (9 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
* remove duplicate settings
* sync the definition of EXTRA_OEMAKE
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb | 18 +++++-------------
1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb b/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
index d43a4a6..9128c65 100644
--- a/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
+++ b/recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
@@ -2,9 +2,7 @@ require recipes-bsp/u-boot/u-boot.inc
inherit fsl-u-boot-localversion
DESCRIPTION = "U-boot provided by Freescale with focus on QorIQ boards"
-HOMEPAGE = "http://u-boot.sf.net"
-SECTION = "bootloaders"
-PROVIDES = "virtual/bootloader u-boot"
+PROVIDES += "u-boot"
LICENSE = "GPLv2 & BSD-3-Clause & BSD-2-Clause & LGPL-2.0 & LGPL-2.1"
LIC_FILES_CHKSUM = " \
file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
@@ -19,20 +17,19 @@ INHIBIT_DEFAULT_DEPS = "1"
DEPENDS = "libgcc virtual/${TARGET_PREFIX}gcc"
DEPENDS_append_qoriq-ppc = " boot-format-native"
-inherit deploy
-
SRC_URI = "git://git.freescale.com/ppc/sdk/u-boot.git;branch=sdk-v2.0.x \
file://fix-build-error-under-gcc6.patch \
"
SRCREV = "a9b437f50e2051f8d42ec9e1a6df52de4bc00e1e"
+S = "${WORKDIR}/git"
+
python () {
if d.getVar("TCMODE", True) == "external-fsl":
return
ml = d.getVar("MULTILIB_VARIANTS", True)
arch = d.getVar("OVERRIDES", True)
-
if "e5500-64b:" in arch or "e6500-64b:" in arch:
if not "lib32" in ml:
raise bb.parse.SkipPackage("Building the u-boot for this arch requires multilib to be enabled")
@@ -44,16 +41,11 @@ python () {
}
WRAP_TARGET_PREFIX ?= "${TARGET_PREFIX}"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-USRC ?= ""
-S = '${@base_conditional("USRC", "", "${WORKDIR}/git", "${USRC}", d)}'
+EXTRA_OEMAKE = 'CROSS_COMPILE=${WRAP_TARGET_PREFIX} CC="${WRAP_TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'
+EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'
LOCALVERSION = "+fsl"
-EXTRA_OEMAKE = 'CROSS_COMPILE=${WRAP_TARGET_PREFIX} CC="${WRAP_TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}"'
-
do_compile_append_qoriq-ppc () {
unset i j
if [ -n "${UBOOT_CONFIG}" ];then
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 05/13] p2041rdb: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (3 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 04/13] u-boot-qoriq: sync with u-boot.inc from poky ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 06/13] p3041ds: " ting.liu
` (8 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/p2041rdb.conf | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/conf/machine/p2041rdb.conf b/conf/machine/p2041rdb.conf
index 41de1d4..aaa3804 100644
--- a/conf/machine/p2041rdb.conf
+++ b/conf/machine/p2041rdb.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e500mc.inc
SOC_FAMILY = "p2041"
+
UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
UBOOT_CONFIG[nor] = "P2041RDB_config"
-UBOOT_CONFIG[nand] = "P2041RDB_NAND_config"
+UBOOT_CONFIG[nand] = "P2041RDB_NAND_config,,u-boot.pbl"
UBOOT_CONFIG[secure-boot] = "P2041RDB_SECURE_BOOT_config"
-UBOOT_CONFIG[sdcard] = "P2041RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "P2041RDB_SPIFLASH_config"
+UBOOT_CONFIG[sdcard] = "P2041RDB_SDCARD_config,,u-boot.pbl"
+UBOOT_CONFIG[spi] = "P2041RDB_SPIFLASH_config,,u-boot.pbl"
+
KERNEL_DEVICETREE ?= "p2041rdb.dtb p2041rdb-usdpaa.dtb \
p2041rdb-usdpaa-shared-interfaces.dtb \
"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 06/13] p3041ds: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (4 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 05/13] p2041rdb: switch to new UBOOT_CONFIG format ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 07/13] p4080ds: " ting.liu
` (7 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/p3041ds.conf | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/conf/machine/p3041ds.conf b/conf/machine/p3041ds.conf
index d2464e3..863a179 100644
--- a/conf/machine/p3041ds.conf
+++ b/conf/machine/p3041ds.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e500mc.inc
SOC_FAMILY = "p3041"
+
UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
UBOOT_CONFIG[nor] = "P3041DS_config"
-UBOOT_CONFIG[nand] = "P3041DS_NAND_config"
+UBOOT_CONFIG[nand] = "P3041DS_NAND_config,,u-boot.pbl"
UBOOT_CONFIG[secure-boot] = "P3041DS_SECURE_BOOT_config"
-UBOOT_CONFIG[sdcard] = "P3041DS_SDCARD_config"
-UBOOT_CONFIG[spi] = "P3041DS_SPIFLASH_config"
+UBOOT_CONFIG[sdcard] = "P3041DS_SDCARD_config,,u-boot.pbl"
+UBOOT_CONFIG[spi] = "P3041DS_SPIFLASH_config,,u-boot.pbl"
+
KERNEL_DEVICETREE ?= "p3041ds.dtb p3041ds-usdpaa.dtb \
p3041ds-usdpaa-shared-interfaces.dtb \
"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 07/13] p4080ds: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (5 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 06/13] p3041ds: " ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 08/13] p5020: " ting.liu
` (6 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/p4080ds.conf | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/conf/machine/p4080ds.conf b/conf/machine/p4080ds.conf
index c035fc6..f033869 100644
--- a/conf/machine/p4080ds.conf
+++ b/conf/machine/p4080ds.conf
@@ -8,11 +8,13 @@
require conf/machine/include/e500mc.inc
SOC_FAMILY = "p4080"
+
UBOOT_CONFIG ??= "secure-boot sdcard spi nor"
UBOOT_CONFIG[nor] = "P4080DS_config"
UBOOT_CONFIG[secure-boot] = "P4080DS_SECURE_BOOT_config"
-UBOOT_CONFIG[sdcard] = "P4080DS_SDCARD_config"
-UBOOT_CONFIG[spi] = "P4080DS_SPIFLASH_config"
+UBOOT_CONFIG[sdcard] = "P4080DS_SDCARD_config,,u-boot.pbl"
+UBOOT_CONFIG[spi] = "P4080DS_SPIFLASH_config,,u-boot.pbl"
+
KERNEL_DEVICETREE ?= "p4080ds.dtb p4080ds-usdpaa.dtb \
p4080ds-usdpaa-shared-interfaces.dtb \
"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 08/13] p5020: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (6 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 07/13] p4080ds: " ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 09/13] p5040: " ting.liu
` (5 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/p5020ds-64b.conf | 9 +++++----
conf/machine/p5020ds.conf | 10 +++++-----
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/conf/machine/p5020ds-64b.conf b/conf/machine/p5020ds-64b.conf
index b02de94..a359130 100644
--- a/conf/machine/p5020ds-64b.conf
+++ b/conf/machine/p5020ds-64b.conf
@@ -8,17 +8,18 @@
require conf/machine/include/e5500-64b.inc
SOC_FAMILY = "p5020"
+
UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
UBOOT_CONFIG[nor] = "P5020DS_config"
-UBOOT_CONFIG[nand] = "P5020DS_NAND_config"
+UBOOT_CONFIG[nand] = "P5020DS_NAND_config,,u-boot.pbl"
UBOOT_CONFIG[secure-boot] = "P5020DS_SECURE_BOOT_config"
-UBOOT_CONFIG[sdcard] = "P5020DS_SDCARD_config"
-UBOOT_CONFIG[spi] = "P5020DS_SPIFLASH_config"
+UBOOT_CONFIG[sdcard] = "P5020DS_SDCARD_config,,u-boot.pbl"
+UBOOT_CONFIG[spi] = "P5020DS_SPIFLASH_config,,u-boot.pbl"
+
KERNEL_DEVICETREE ?= "p5020ds.dtb p5020ds-usdpaa.dtb \
p5020ds-usdpaa-shared-interfaces.dtb \
"
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet64_smp_defconfig"
JFFS2_ERASEBLOCK = "0x10000"
-
EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
diff --git a/conf/machine/p5020ds.conf b/conf/machine/p5020ds.conf
index 95be344..5249f28 100644
--- a/conf/machine/p5020ds.conf
+++ b/conf/machine/p5020ds.conf
@@ -8,18 +8,18 @@
require conf/machine/include/e5500.inc
SOC_FAMILY = "p5020"
+
UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
UBOOT_CONFIG[nor] = "P5020DS_config"
-UBOOT_CONFIG[nand] = "P5020DS_NAND_config"
+UBOOT_CONFIG[nand] = "P5020DS_NAND_config,,u-boot.pbl"
UBOOT_CONFIG[secure-boot] = "P5020DS_SECURE_BOOT_config"
-UBOOT_CONFIG[sdcard] = "P5020DS_SDCARD_config"
-UBOOT_CONFIG[spi] = "P5020DS_SPIFLASH_config"
+UBOOT_CONFIG[sdcard] = "P5020DS_SDCARD_config,,u-boot.pbl"
+UBOOT_CONFIG[spi] = "P5020DS_SPIFLASH_config,,u-boot.pbl"
+
KERNEL_DEVICETREE ?= "p5020ds.dtb p5020ds-usdpaa.dtb \
p5020ds-usdpaa-shared-interfaces.dtb \
"
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet32_smp_defconfig"
JFFS2_ERASEBLOCK = "0x10000"
-
-
EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 09/13] p5040: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (7 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 08/13] p5020: " ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 10/13] t1023: " ting.liu
` (4 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/p5040ds-64b.conf | 8 +++++---
conf/machine/p5040ds.conf | 8 +++++---
2 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/conf/machine/p5040ds-64b.conf b/conf/machine/p5040ds-64b.conf
index 0ff19d3..32b4c3e 100644
--- a/conf/machine/p5040ds-64b.conf
+++ b/conf/machine/p5040ds-64b.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e5500-64b.inc
SOC_FAMILY = "p5040"
+
UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
UBOOT_CONFIG[nor] = "P5040DS_config"
-UBOOT_CONFIG[nand] = "P5040DS_NAND_config"
+UBOOT_CONFIG[nand] = "P5040DS_NAND_config,,u-boot.pbl"
UBOOT_CONFIG[secure-boot] = "P5040DS_SECURE_BOOT_config"
-UBOOT_CONFIG[sdcard] = "P5040DS_SDCARD_config"
-UBOOT_CONFIG[spi] = "P5040DS_SPIFLASH_config"
+UBOOT_CONFIG[sdcard] = "P5040DS_SDCARD_config,,u-boot.pbl"
+UBOOT_CONFIG[spi] = "P5040DS_SPIFLASH_config,,u-boot.pbl"
+
KERNEL_DEVICETREE ?= "p5040ds.dtb p5040ds-usdpaa.dtb \
p5040ds-usdpaa-shared-interfaces.dtb \
"
diff --git a/conf/machine/p5040ds.conf b/conf/machine/p5040ds.conf
index 48675ac..2ca3def 100644
--- a/conf/machine/p5040ds.conf
+++ b/conf/machine/p5040ds.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e5500.inc
SOC_FAMILY = "p5040"
+
UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
UBOOT_CONFIG[nor] = "P5040DS_config"
-UBOOT_CONFIG[nand] = "P5040DS_NAND_config"
+UBOOT_CONFIG[nand] = "P5040DS_NAND_config,,u-boot.pbl"
UBOOT_CONFIG[secure-boot] = "P5040DS_SECURE_BOOT_config"
-UBOOT_CONFIG[sdcard] = "P5040DS_SDCARD_config"
-UBOOT_CONFIG[spi] = "P5040DS_SPIFLASH_config"
+UBOOT_CONFIG[sdcard] = "P5040DS_SDCARD_config,,u-boot.pbl"
+UBOOT_CONFIG[spi] = "P5040DS_SPIFLASH_config,,u-boot.pbl"
+
KERNEL_DEVICETREE ?= "p5040ds.dtb p5040ds-usdpaa.dtb \
p5040ds-usdpaa-shared-interfaces.dtb \
"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 10/13] t1023: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (8 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 09/13] p5040: " ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 11/13] t1024: " ting.liu
` (3 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/t1023rdb-64b.conf | 11 +++++++----
conf/machine/t1023rdb.conf | 11 +++++++----
2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/conf/machine/t1023rdb-64b.conf b/conf/machine/t1023rdb-64b.conf
index 2d38bf8..2cfb4ef 100644
--- a/conf/machine/t1023rdb-64b.conf
+++ b/conf/machine/t1023rdb-64b.conf
@@ -8,11 +8,14 @@
require conf/machine/include/e5500-64b.inc
SOC_FAMILY = "t1:t1023"
-UBOOT_CONFIG ??= "nand sdcard spi nor"
+
+UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
UBOOT_CONFIG[nor] = "T1023RDB_config"
-UBOOT_CONFIG[nand] = "T1023RDB_NAND_config"
-UBOOT_CONFIG[sdcard] = "T1023RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T1023RDB_SPIFLASH_config"
+UBOOT_CONFIG[nand] = "T1023RDB_NAND_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "T1023RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T1023RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[secure-boot] = "T1023RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t1023rdb.dtb t1023rdb-usdpaa.dtb t1023rdb-usdpaa-shared-interfaces.dtb"
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet64_fmanv3l_smp_defconfig"
diff --git a/conf/machine/t1023rdb.conf b/conf/machine/t1023rdb.conf
index 4e7cc06..3715ad3 100644
--- a/conf/machine/t1023rdb.conf
+++ b/conf/machine/t1023rdb.conf
@@ -8,11 +8,14 @@
require conf/machine/include/e5500.inc
SOC_FAMILY = "t1:t1023"
-UBOOT_CONFIG ??= "nand sdcard spi nor"
+
+UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
UBOOT_CONFIG[nor] = "T1023RDB_config"
-UBOOT_CONFIG[nand] = "T1023RDB_NAND_config"
-UBOOT_CONFIG[sdcard] = "T1023RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T1023RDB_SPIFLASH_config"
+UBOOT_CONFIG[nand] = "T1023RDB_NAND_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "T1023RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T1023RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[secure-boot] = "T1023RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t1023rdb.dtb t1023rdb-usdpaa.dtb t1023rdb-usdpaa-shared-interfaces.dtb"
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet32_fmanv3l_smp_defconfig"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 11/13] t1024: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (9 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 10/13] t1023: " ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 12/13] t104x: " ting.liu
` (2 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/t1024rdb-64b.conf | 8 +++++---
conf/machine/t1024rdb.conf | 8 +++++---
2 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/conf/machine/t1024rdb-64b.conf b/conf/machine/t1024rdb-64b.conf
index 9c86430..8691633 100644
--- a/conf/machine/t1024rdb-64b.conf
+++ b/conf/machine/t1024rdb-64b.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e5500-64b.inc
SOC_FAMILY = "t1:t1024"
+
UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
UBOOT_CONFIG[nor] = "T1024RDB_config"
-UBOOT_CONFIG[nand] = "T1024RDB_NAND_config"
-UBOOT_CONFIG[sdcard] = "T1024RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T1024RDB_SPIFLASH_config"
+UBOOT_CONFIG[nand] = "T1024RDB_NAND_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "T1024RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T1024RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[secure-boot] = "T1024RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t1024rdb.dtb t1024rdb-usdpaa.dtb t1024rdb-usdpaa-capwap.dtb"
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet64_fmanv3l_smp_defconfig"
diff --git a/conf/machine/t1024rdb.conf b/conf/machine/t1024rdb.conf
index 4f6c3aa..45c4764 100644
--- a/conf/machine/t1024rdb.conf
+++ b/conf/machine/t1024rdb.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e5500.inc
SOC_FAMILY = "t1:t1024"
+
UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
UBOOT_CONFIG[nor] = "T1024RDB_config"
-UBOOT_CONFIG[nand] = "T1024RDB_NAND_config"
-UBOOT_CONFIG[sdcard] = "T1024RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T1024RDB_SPIFLASH_config"
+UBOOT_CONFIG[nand] = "T1024RDB_NAND_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "T1024RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T1024RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[secure-boot] = "T1024RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t1024rdb.dtb t1024rdb-usdpaa.dtb t1024rdb-usdpaa-capwap.dtb"
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet32_fmanv3l_smp_defconfig"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 12/13] t104x: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (10 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 11/13] t1024: " ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 13/13] t2080: " ting.liu
2016-06-21 13:47 ` [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I Robert E. Cochran
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/t1040d4rdb-64b.conf | 8 +++++---
conf/machine/t1040d4rdb.conf | 8 +++++---
conf/machine/t1042d4rdb-64b.conf | 8 +++++---
conf/machine/t1042d4rdb.conf | 8 +++++---
4 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/conf/machine/t1040d4rdb-64b.conf b/conf/machine/t1040d4rdb-64b.conf
index f40dbcf..120e905 100644
--- a/conf/machine/t1040d4rdb-64b.conf
+++ b/conf/machine/t1040d4rdb-64b.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e5500-64b.inc
SOC_FAMILY = "t1:t1040"
+
UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
UBOOT_CONFIG[nor] = "T1040D4RDB_config"
-UBOOT_CONFIG[nand] = "T1040D4RDB_NAND_config"
-UBOOT_CONFIG[sdcard] = "T1040D4RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T1040D4RDB_SPIFLASH_config"
+UBOOT_CONFIG[nand] = "T1040D4RDB_NAND_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "T1040D4RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T1040D4RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[secure-boot] = "T1040D4RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t1040d4rdb.dtb t1040d4rdb-usdpaa.dtb \
t1040d4rdb-usdpaa-lag.dtb t1040d4rdb-usdpaa-shared-interfaces.dtb \
"
diff --git a/conf/machine/t1040d4rdb.conf b/conf/machine/t1040d4rdb.conf
index 5a0faa4..a202daa 100644
--- a/conf/machine/t1040d4rdb.conf
+++ b/conf/machine/t1040d4rdb.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e5500.inc
SOC_FAMILY = "t1:t1040"
+
UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
UBOOT_CONFIG[nor] = "T1040D4RDB_config"
-UBOOT_CONFIG[nand] = "T1040D4RDB_NAND_config"
-UBOOT_CONFIG[sdcard] = "T1040D4RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T1040D4RDB_SPIFLASH_config"
+UBOOT_CONFIG[nand] = "T1040D4RDB_NAND_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "T1040D4RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T1040D4RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[secure-boot] = "T1040D4RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t1040d4rdb.dtb t1040d4rdb-usdpaa.dtb \
t1040d4rdb-usdpaa-lag.dtb t1040d4rdb-usdpaa-shared-interfaces.dtb \
"
diff --git a/conf/machine/t1042d4rdb-64b.conf b/conf/machine/t1042d4rdb-64b.conf
index 18e8b2b..c8814b5 100644
--- a/conf/machine/t1042d4rdb-64b.conf
+++ b/conf/machine/t1042d4rdb-64b.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e5500-64b.inc
SOC_FAMILY = "t1:t1042"
+
UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
UBOOT_CONFIG[nor] = "T1042D4RDB_config"
-UBOOT_CONFIG[nand] = "T1042D4RDB_NAND_config"
-UBOOT_CONFIG[sdcard] = "T1042D4RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T1042D4RDB_SPIFLASH_config"
+UBOOT_CONFIG[nand] = "T1042D4RDB_NAND_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "T1042D4RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T1042D4RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[secure-boot] = "T1042D4RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t1042d4rdb.dtb t1042d4rdb-usdpaa.dtb \
t1042d4rdb-usdpaa-shared-interfaces.dtb \
"
diff --git a/conf/machine/t1042d4rdb.conf b/conf/machine/t1042d4rdb.conf
index 430cd42..3372302 100644
--- a/conf/machine/t1042d4rdb.conf
+++ b/conf/machine/t1042d4rdb.conf
@@ -8,12 +8,14 @@
require conf/machine/include/e5500.inc
SOC_FAMILY = "t1:t1042"
+
UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
UBOOT_CONFIG[nor] = "T1042D4RDB_config"
-UBOOT_CONFIG[nand] = "T1042D4RDB_NAND_config"
-UBOOT_CONFIG[sdcard] = "T1042D4RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T1042D4RDB_SPIFLASH_config"
+UBOOT_CONFIG[nand] = "T1042D4RDB_NAND_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[sdcard] = "T1042D4RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T1042D4RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[secure-boot] = "T1042D4RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t1042d4rdb.dtb t1042d4rdb-usdpaa.dtb \
t1042d4rdb-usdpaa-shared-interfaces.dtb \
"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* [meta-fsl-ppc][PATCH 13/13] t2080: switch to new UBOOT_CONFIG format
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (11 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 12/13] t104x: " ting.liu
@ 2016-06-17 7:36 ` ting.liu
2016-06-21 13:47 ` [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I Robert E. Cochran
13 siblings, 0 replies; 17+ messages in thread
From: ting.liu @ 2016-06-17 7:36 UTC (permalink / raw)
To: meta-freescale
From: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ting Liu <ting.liu@nxp.com>
---
conf/machine/t2080qds-64b.conf | 9 +++++----
conf/machine/t2080qds.conf | 8 ++++----
conf/machine/t2080rdb-64b.conf | 11 ++++++-----
conf/machine/t2080rdb.conf | 8 ++++----
4 files changed, 19 insertions(+), 17 deletions(-)
diff --git a/conf/machine/t2080qds-64b.conf b/conf/machine/t2080qds-64b.conf
index 83babf5..b4316f6 100644
--- a/conf/machine/t2080qds-64b.conf
+++ b/conf/machine/t2080qds-64b.conf
@@ -8,18 +8,19 @@
require conf/machine/include/e6500-64b.inc
SOC_FAMILY = "t2:t2080"
+
UBOOT_CONFIG ??= "sdcard spi nand srio-pcie-boot secure-boot nor"
UBOOT_CONFIG[nor] = "T2080QDS_config"
-UBOOT_CONFIG[sdcard] = "T2080QDS_SDCARD_config"
-UBOOT_CONFIG[spi] = "T2080QDS_SPIFLASH_config"
-UBOOT_CONFIG[nand] = "T2080QDS_NAND_config"
+UBOOT_CONFIG[sdcard] = "T2080QDS_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T2080QDS_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[nand] = "T2080QDS_NAND_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[srio-pcie-boot] = "T2080QDS_SRIO_PCIE_BOOT_config"
UBOOT_CONFIG[secure-boot] = "T2080QDS_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t2080qds.dtb t2080qds-usdpaa.dtb \
t2080qds-usdpaa-shared-interfaces.dtb \
"
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
JFFS2_ERASEBLOCK = "0x10000"
-
EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
diff --git a/conf/machine/t2080qds.conf b/conf/machine/t2080qds.conf
index 790a60e..a14b6c9 100644
--- a/conf/machine/t2080qds.conf
+++ b/conf/machine/t2080qds.conf
@@ -8,11 +8,12 @@
require conf/machine/include/e6500.inc
SOC_FAMILY = "t2:t2080"
+
UBOOT_CONFIG ??= "sdcard spi nand srio-pcie-boot secure-boot nor"
UBOOT_CONFIG[nor] = "T2080QDS_config"
-UBOOT_CONFIG[sdcard] = "T2080QDS_SDCARD_config"
-UBOOT_CONFIG[spi] = "T2080QDS_SPIFLASH_config"
-UBOOT_CONFIG[nand] = "T2080QDS_NAND_config"
+UBOOT_CONFIG[sdcard] = "T2080QDS_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T2080QDS_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[nand] = "T2080QDS_NAND_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[srio-pcie-boot] = "T2080QDS_SRIO_PCIE_BOOT_config"
UBOOT_CONFIG[secure-boot] = "T2080QDS_SECURE_BOOT_config"
@@ -22,5 +23,4 @@ KERNEL_DEVICETREE ?= "t2080qds.dtb t2080qds-usdpaa.dtb \
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
JFFS2_ERASEBLOCK = "0x10000"
-
EXTRA_IMAGEDEPENDS += "fm-ucode rcw lib64-hypervisor hv-cfg"
diff --git a/conf/machine/t2080rdb-64b.conf b/conf/machine/t2080rdb-64b.conf
index 9421603..868056e 100644
--- a/conf/machine/t2080rdb-64b.conf
+++ b/conf/machine/t2080rdb-64b.conf
@@ -8,18 +8,19 @@
require conf/machine/include/e6500-64b.inc
SOC_FAMILY = "t2:t2080"
-UBOOT_CONFIG ??= "nor sdcard spi nand srio-pcie-boot secure-boot nor"
+
+UBOOT_CONFIG ??= "sdcard spi nand srio-pcie-boot secure-boot nor"
UBOOT_CONFIG[nor] = "T2080RDB_config"
-UBOOT_CONFIG[sdcard] = "T2080RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T2080RDB_SPIFLASH_config"
-UBOOT_CONFIG[nand] = "T2080RDB_NAND_config"
+UBOOT_CONFIG[sdcard] = "T2080RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T2080RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[nand] = "T2080RDB_NAND_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[srio-pcie-boot] = "T2080RDB_SRIO_PCIE_BOOT_config"
UBOOT_CONFIG[secure-boot] = "T2080RDB_SECURE_BOOT_config"
+
KERNEL_DEVICETREE ?= "t2080rdb.dtb t2080rdb-usdpaa.dtb \
t2080rdb-usdpaa-shared-interfaces.dtb \
"
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
JFFS2_ERASEBLOCK = "0x10000"
-
EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
diff --git a/conf/machine/t2080rdb.conf b/conf/machine/t2080rdb.conf
index d1f8c09..7b0e241 100644
--- a/conf/machine/t2080rdb.conf
+++ b/conf/machine/t2080rdb.conf
@@ -8,11 +8,12 @@
require conf/machine/include/e6500.inc
SOC_FAMILY = "t2:t2080"
+
UBOOT_CONFIG ??= "sdcard spi nand srio-pcie-boot secure-boot nor"
UBOOT_CONFIG[nor] = "T2080RDB_config"
-UBOOT_CONFIG[sdcard] = "T2080RDB_SDCARD_config"
-UBOOT_CONFIG[spi] = "T2080RDB_SPIFLASH_config"
-UBOOT_CONFIG[nand] = "T2080RDB_NAND_config"
+UBOOT_CONFIG[sdcard] = "T2080RDB_SDCARD_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[spi] = "T2080RDB_SPIFLASH_config,,u-boot-with-spl-pbl.bin"
+UBOOT_CONFIG[nand] = "T2080RDB_NAND_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[srio-pcie-boot] = "T2080RDB_SRIO_PCIE_BOOT_config"
UBOOT_CONFIG[secure-boot] = "T2080RDB_SECURE_BOOT_config"
@@ -22,5 +23,4 @@ KERNEL_DEVICETREE ?= "t2080rdb.dtb t2080rdb-usdpaa.dtb \
KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
JFFS2_ERASEBLOCK = "0x10000"
-
EXTRA_IMAGEDEPENDS += "fm-ucode rcw lib64-hypervisor hv-cfg"
--
1.9.2
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I
2016-06-17 7:36 [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I ting.liu
` (12 preceding siblings ...)
2016-06-17 7:36 ` [meta-fsl-ppc][PATCH 13/13] t2080: " ting.liu
@ 2016-06-21 13:47 ` Robert E. Cochran
2016-06-22 2:00 ` Ting Liu
13 siblings, 1 reply; 17+ messages in thread
From: Robert E. Cochran @ 2016-06-21 13:47 UTC (permalink / raw)
To: ting.liu; +Cc: meta-freescale
Thank you Ting.
In which of the following repos will we find these patches? Please give
us an idea when they will be applied and which branch(es).
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/
https://github.com/Freescale/meta-freescale.git
git://git.freescale.com/yocto/meta-freescale.git
Thank you,
Bob
On 06/17/2016 03:36 AM, ting.liu@nxp.com wrote:
> From: Ting Liu <ting.liu@nxp.com>
>
> These changes need the below oe-core patch to be applied:
> http://patchwork.openembedded.org/patch/124953/
>
> Ting Liu (13):
> remove not supported e500v2 machines
> u-boot-qoriq: upgrade to 2016.01
> u-boot-qoriq: switch to new UBOOT_CONFIG format
> u-boot-qoriq: sync with u-boot.inc from poky
> p2041rdb: switch to new UBOOT_CONFIG format
> p3041ds: switch to new UBOOT_CONFIG format
> p4080ds: switch to new UBOOT_CONFIG format
> p5020: switch to new UBOOT_CONFIG format
> p5040: switch to new UBOOT_CONFIG format
> t1023: switch to new UBOOT_CONFIG format
> t1024: switch to new UBOOT_CONFIG format
> t104x: switch to new UBOOT_CONFIG format
> t2080: switch to new UBOOT_CONFIG format
>
> conf/machine/bsc9131rdb.conf | 20 ----
> conf/machine/bsc9132qds.conf | 32 ------
> conf/machine/p1010rdb.conf | 29 ------
> conf/machine/p1020rdb.conf | 20 ----
> conf/machine/p1021rdb.conf | 27 -----
> conf/machine/p1022ds.conf | 36 -------
> conf/machine/p1023rdb.conf | 18 ----
> conf/machine/p1025twr.conf | 20 ----
> conf/machine/p2020rdb.conf | 24 -----
> conf/machine/p2041rdb.conf | 8 +-
> conf/machine/p3041ds.conf | 8 +-
> conf/machine/p4080ds.conf | 6 +-
> conf/machine/p5020ds-64b.conf | 9 +-
> conf/machine/p5020ds.conf | 10 +-
> conf/machine/p5040ds-64b.conf | 8 +-
> conf/machine/p5040ds.conf | 8 +-
> conf/machine/t1023rdb-64b.conf | 11 +-
> conf/machine/t1023rdb.conf | 11 +-
> conf/machine/t1024rdb-64b.conf | 8 +-
> conf/machine/t1024rdb.conf | 8 +-
> conf/machine/t1040d4rdb-64b.conf | 8 +-
> conf/machine/t1040d4rdb.conf | 8 +-
> conf/machine/t1042d4rdb-64b.conf | 8 +-
> conf/machine/t1042d4rdb.conf | 8 +-
> conf/machine/t2080qds-64b.conf | 9 +-
> conf/machine/t2080qds.conf | 8 +-
> conf/machine/t2080rdb-64b.conf | 11 +-
> conf/machine/t2080rdb.conf | 8 +-
> ...5xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch | 77 --------------
> .../u-boot/files/Fix-the-depend-race-issue.patch | 38 -------
> .../files/add-fgnu89-inline-option-for-gcc5.patch | 39 -------
> recipes-bsp/u-boot/files/gcc5.patch | 91 -----------------
> recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb | 113 ---------------------
> recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb | 74 ++++++++++++++
> 34 files changed, 171 insertions(+), 650 deletions(-)
> delete mode 100644 conf/machine/bsc9131rdb.conf
> delete mode 100644 conf/machine/bsc9132qds.conf
> delete mode 100644 conf/machine/p1010rdb.conf
> delete mode 100644 conf/machine/p1020rdb.conf
> delete mode 100644 conf/machine/p1021rdb.conf
> delete mode 100644 conf/machine/p1022ds.conf
> delete mode 100644 conf/machine/p1023rdb.conf
> delete mode 100644 conf/machine/p1025twr.conf
> delete mode 100644 conf/machine/p2020rdb.conf
> delete mode 100644 recipes-bsp/u-boot/files/0001-u-boot-mpc85xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch
> delete mode 100644 recipes-bsp/u-boot/files/Fix-the-depend-race-issue.patch
> delete mode 100644 recipes-bsp/u-boot/files/add-fgnu89-inline-option-for-gcc5.patch
> delete mode 100644 recipes-bsp/u-boot/files/gcc5.patch
> delete mode 100644 recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb
> create mode 100644 recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
>
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I
2016-06-21 13:47 ` [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I Robert E. Cochran
@ 2016-06-22 2:00 ` Ting Liu
2016-06-22 5:58 ` Zhenhua Luo
0 siblings, 1 reply; 17+ messages in thread
From: Ting Liu @ 2016-06-22 2:00 UTC (permalink / raw)
To: Robert E. Cochran; +Cc: meta-freescale
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/
master branch
> -----Original Message-----
> From: Robert E. Cochran [mailto:yocto@mindchasers.com]
> Sent: Tuesday, June 21, 2016 9:47 PM
> To: Ting Liu <ting.liu@nxp.com>
> Cc: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0
> patches - Part I
>
> Thank you Ting.
>
> In which of the following repos will we find these patches? Please give us an
> idea when they will be applied and which branch(es).
>
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/
>
> https://github.com/Freescale/meta-freescale.git
>
> git://git.freescale.com/yocto/meta-freescale.git
>
> Thank you,
>
> Bob
>
>
>
> On 06/17/2016 03:36 AM, ting.liu@nxp.com wrote:
> > From: Ting Liu <ting.liu@nxp.com>
> >
> > These changes need the below oe-core patch to be applied:
> > http://patchwork.openembedded.org/patch/124953/
> >
> > Ting Liu (13):
> > remove not supported e500v2 machines
> > u-boot-qoriq: upgrade to 2016.01
> > u-boot-qoriq: switch to new UBOOT_CONFIG format
> > u-boot-qoriq: sync with u-boot.inc from poky
> > p2041rdb: switch to new UBOOT_CONFIG format
> > p3041ds: switch to new UBOOT_CONFIG format
> > p4080ds: switch to new UBOOT_CONFIG format
> > p5020: switch to new UBOOT_CONFIG format
> > p5040: switch to new UBOOT_CONFIG format
> > t1023: switch to new UBOOT_CONFIG format
> > t1024: switch to new UBOOT_CONFIG format
> > t104x: switch to new UBOOT_CONFIG format
> > t2080: switch to new UBOOT_CONFIG format
> >
> > conf/machine/bsc9131rdb.conf | 20 ----
> > conf/machine/bsc9132qds.conf | 32 ------
> > conf/machine/p1010rdb.conf | 29 ------
> > conf/machine/p1020rdb.conf | 20 ----
> > conf/machine/p1021rdb.conf | 27 -----
> > conf/machine/p1022ds.conf | 36 -------
> > conf/machine/p1023rdb.conf | 18 ----
> > conf/machine/p1025twr.conf | 20 ----
> > conf/machine/p2020rdb.conf | 24 -----
> > conf/machine/p2041rdb.conf | 8 +-
> > conf/machine/p3041ds.conf | 8 +-
> > conf/machine/p4080ds.conf | 6 +-
> > conf/machine/p5020ds-64b.conf | 9 +-
> > conf/machine/p5020ds.conf | 10 +-
> > conf/machine/p5040ds-64b.conf | 8 +-
> > conf/machine/p5040ds.conf | 8 +-
> > conf/machine/t1023rdb-64b.conf | 11 +-
> > conf/machine/t1023rdb.conf | 11 +-
> > conf/machine/t1024rdb-64b.conf | 8 +-
> > conf/machine/t1024rdb.conf | 8 +-
> > conf/machine/t1040d4rdb-64b.conf | 8 +-
> > conf/machine/t1040d4rdb.conf | 8 +-
> > conf/machine/t1042d4rdb-64b.conf | 8 +-
> > conf/machine/t1042d4rdb.conf | 8 +-
> > conf/machine/t2080qds-64b.conf | 9 +-
> > conf/machine/t2080qds.conf | 8 +-
> > conf/machine/t2080rdb-64b.conf | 11 +-
> > conf/machine/t2080rdb.conf | 8 +-
> > ...5xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch | 77 --------------
> > .../u-boot/files/Fix-the-depend-race-issue.patch | 38 -------
> > .../files/add-fgnu89-inline-option-for-gcc5.patch | 39 -------
> > recipes-bsp/u-boot/files/gcc5.patch | 91 -----------------
> > recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb | 113 ---------------------
> > recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb | 74 ++++++++++++++
> > 34 files changed, 171 insertions(+), 650 deletions(-)
> > delete mode 100644 conf/machine/bsc9131rdb.conf
> > delete mode 100644 conf/machine/bsc9132qds.conf
> > delete mode 100644 conf/machine/p1010rdb.conf
> > delete mode 100644 conf/machine/p1020rdb.conf
> > delete mode 100644 conf/machine/p1021rdb.conf
> > delete mode 100644 conf/machine/p1022ds.conf
> > delete mode 100644 conf/machine/p1023rdb.conf
> > delete mode 100644 conf/machine/p1025twr.conf
> > delete mode 100644 conf/machine/p2020rdb.conf
> > delete mode 100644 recipes-bsp/u-boot/files/0001-u-boot-mpc85xx-u-
> boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch
> > delete mode 100644 recipes-bsp/u-boot/files/Fix-the-depend-race-
> issue.patch
> > delete mode 100644 recipes-bsp/u-boot/files/add-fgnu89-inline-option-
> for-gcc5.patch
> > delete mode 100644 recipes-bsp/u-boot/files/gcc5.patch
> > delete mode 100644 recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb
> > create mode 100644 recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0 patches - Part I
2016-06-22 2:00 ` Ting Liu
@ 2016-06-22 5:58 ` Zhenhua Luo
0 siblings, 0 replies; 17+ messages in thread
From: Zhenhua Luo @ 2016-06-22 5:58 UTC (permalink / raw)
To: Ting Liu, Robert E. Cochran; +Cc: meta-freescale
The patches are under review and testing, those patches plan to be merged by the end of this month.
BTW, the u-boot related patches depend on http://patchwork.openembedded.org/patch/124953/.
Best Regards,
Zhenhua
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Ting Liu
> Sent: Wednesday, June 22, 2016 10:00 AM
> To: Robert E. Cochran <yocto@mindchasers.com>
> Cc: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-ppc][PATCH 00/13] QorIQ SDK V2.0
> patches - Part I
>
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/
> master branch
>
> > -----Original Message-----
> > From: Robert E. Cochran [mailto:yocto@mindchasers.com]
> > Sent: Tuesday, June 21, 2016 9:47 PM
> > To: Ting Liu <ting.liu@nxp.com>
> > Cc: meta-freescale@yoctoproject.org
> > Subject: Re: [meta-freescale] [meta-fsl-ppc][PATCH 00/13] QorIQ SDK
> > V2.0 patches - Part I
> >
> > Thank you Ting.
> >
> > In which of the following repos will we find these patches? Please
> > give us an idea when they will be applied and which branch(es).
> >
> > http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/
> >
> > https://github.com/Freescale/meta-freescale.git
> >
> > git://git.freescale.com/yocto/meta-freescale.git
> >
> > Thank you,
> >
> > Bob
> >
> >
> >
> > On 06/17/2016 03:36 AM, ting.liu@nxp.com wrote:
> > > From: Ting Liu <ting.liu@nxp.com>
> > >
> > > These changes need the below oe-core patch to be applied:
> > > http://patchwork.openembedded.org/patch/124953/
> > >
> > > Ting Liu (13):
> > > remove not supported e500v2 machines
> > > u-boot-qoriq: upgrade to 2016.01
> > > u-boot-qoriq: switch to new UBOOT_CONFIG format
> > > u-boot-qoriq: sync with u-boot.inc from poky
> > > p2041rdb: switch to new UBOOT_CONFIG format
> > > p3041ds: switch to new UBOOT_CONFIG format
> > > p4080ds: switch to new UBOOT_CONFIG format
> > > p5020: switch to new UBOOT_CONFIG format
> > > p5040: switch to new UBOOT_CONFIG format
> > > t1023: switch to new UBOOT_CONFIG format
> > > t1024: switch to new UBOOT_CONFIG format
> > > t104x: switch to new UBOOT_CONFIG format
> > > t2080: switch to new UBOOT_CONFIG format
> > >
> > > conf/machine/bsc9131rdb.conf | 20 ----
> > > conf/machine/bsc9132qds.conf | 32 ------
> > > conf/machine/p1010rdb.conf | 29 ------
> > > conf/machine/p1020rdb.conf | 20 ----
> > > conf/machine/p1021rdb.conf | 27 -----
> > > conf/machine/p1022ds.conf | 36 -------
> > > conf/machine/p1023rdb.conf | 18 ----
> > > conf/machine/p1025twr.conf | 20 ----
> > > conf/machine/p2020rdb.conf | 24 -----
> > > conf/machine/p2041rdb.conf | 8 +-
> > > conf/machine/p3041ds.conf | 8 +-
> > > conf/machine/p4080ds.conf | 6 +-
> > > conf/machine/p5020ds-64b.conf | 9 +-
> > > conf/machine/p5020ds.conf | 10 +-
> > > conf/machine/p5040ds-64b.conf | 8 +-
> > > conf/machine/p5040ds.conf | 8 +-
> > > conf/machine/t1023rdb-64b.conf | 11 +-
> > > conf/machine/t1023rdb.conf | 11 +-
> > > conf/machine/t1024rdb-64b.conf | 8 +-
> > > conf/machine/t1024rdb.conf | 8 +-
> > > conf/machine/t1040d4rdb-64b.conf | 8 +-
> > > conf/machine/t1040d4rdb.conf | 8 +-
> > > conf/machine/t1042d4rdb-64b.conf | 8 +-
> > > conf/machine/t1042d4rdb.conf | 8 +-
> > > conf/machine/t2080qds-64b.conf | 9 +-
> > > conf/machine/t2080qds.conf | 8 +-
> > > conf/machine/t2080rdb-64b.conf | 11 +-
> > > conf/machine/t2080rdb.conf | 8 +-
> > > ...5xx-u-boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch | 77 --------------
> > > .../u-boot/files/Fix-the-depend-race-issue.patch | 38 -------
> > > .../files/add-fgnu89-inline-option-for-gcc5.patch | 39 -------
> > > recipes-bsp/u-boot/files/gcc5.patch | 91 -----------------
> > > recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb | 113 ---------------------
> > > recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb | 74 ++++++++++++++
> > > 34 files changed, 171 insertions(+), 650 deletions(-)
> > > delete mode 100644 conf/machine/bsc9131rdb.conf
> > > delete mode 100644 conf/machine/bsc9132qds.conf
> > > delete mode 100644 conf/machine/p1010rdb.conf
> > > delete mode 100644 conf/machine/p1020rdb.conf
> > > delete mode 100644 conf/machine/p1021rdb.conf
> > > delete mode 100644 conf/machine/p1022ds.conf
> > > delete mode 100644 conf/machine/p1023rdb.conf
> > > delete mode 100644 conf/machine/p1025twr.conf
> > > delete mode 100644 conf/machine/p2020rdb.conf
> > > delete mode 100644 recipes-bsp/u-boot/files/0001-u-boot-mpc85xx-u-
> > boot-.lds-remove-_GLOBAL_OFFSET_TAB.patch
> > > delete mode 100644 recipes-bsp/u-boot/files/Fix-the-depend-race-
> > issue.patch
> > > delete mode 100644
> > > recipes-bsp/u-boot/files/add-fgnu89-inline-option-
> > for-gcc5.patch
> > > delete mode 100644 recipes-bsp/u-boot/files/gcc5.patch
> > > delete mode 100644 recipes-bsp/u-boot/u-boot-qoriq_2015.01.bb
> > > create mode 100644 recipes-bsp/u-boot/u-boot-qoriq_2016.01.bb
> > >
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 17+ messages in thread