[Qemu-devel] [PATCH 07/13] pckbd: handle A20 IRQ as GPIO

[Efimov Vasily <real@ispras.ru>]

The i8042 device has outgouing IRQ line A20. Currently the IRQ is referenced
by a pointer which normally is set during machine initialization. The pointer
is never changed at runtime. So common GPIO model can be applied to A20 IRQ
line. Note that checking for IRQ to be connected as in previous version
of code is not required because qemu_set_irq will do it.

Signed-off-by: Efimov Vasily <real@ispras.ru>
---
 hw/input/pckbd.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c
index 1d932ec..1406b6b 100644
--- a/hw/input/pckbd.c
+++ b/hw/input/pckbd.c
@@ -146,7 +146,7 @@ typedef struct KBDState {
 
     qemu_irq irq_kbd;
     qemu_irq irq_mouse;
-    qemu_irq *a20_out;
+    qemu_irq a20_out;
     hwaddr mask;
 } KBDState;
 
@@ -224,9 +224,7 @@ static void outport_write(KBDState *s, uint32_t val)
 {
     DPRINTF("kbd: write outport=0x%02x\n", val);
     s->outport = val;
-    if (s->a20_out) {
-        qemu_set_irq(*s->a20_out, (val >> 1) & 1);
-    }
+    qemu_set_irq(s->a20_out, (val >> 1) & 1);
     if (!(val & 1)) {
         qemu_system_reset_request();
     }
@@ -295,15 +293,11 @@ static void kbd_write_command(void *opaque, hwaddr addr,
         kbd_queue(s, s->outport, 0);
         break;
     case KBD_CCMD_ENABLE_A20:
-        if (s->a20_out) {
-            qemu_irq_raise(*s->a20_out);
-        }
+        qemu_irq_raise(s->a20_out);
         s->outport |= KBD_OUT_A20;
         break;
     case KBD_CCMD_DISABLE_A20:
-        if (s->a20_out) {
-            qemu_irq_lower(*s->a20_out);
-        }
+        qemu_irq_lower(s->a20_out);
         s->outport &= ~KBD_OUT_A20;
         break;
     case KBD_CCMD_RESET:
@@ -507,10 +501,7 @@ void i8042_isa_mouse_fake_event(void *opaque)
 
 void i8042_setup_a20_line(ISADevice *dev, qemu_irq *a20_out)
 {
-    ISAKBDState *isa = I8042(dev);
-    KBDState *s = &isa->kbd;
-
-    s->a20_out = a20_out;
+    qdev_connect_gpio_out(DEVICE(dev), 0, *a20_out);
 }
 
 static const VMStateDescription vmstate_kbd_isa = {
@@ -552,6 +543,8 @@ static void i8042_initfn(Object *obj)
                           "i8042-data", 1);
     memory_region_init_io(isa_s->io + 1, obj, &i8042_cmd_ops, s,
                           "i8042-cmd", 1);
+
+    qdev_init_gpio_out(DEVICE(obj), &s->a20_out, 1);
 }
 
 static void i8042_realizefn(DeviceState *dev, Error **errp)
-- 
2.7.4