From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Andy Gross <andy.gross@linaro.org>
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org,
David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/8] arm64: dts: db820c: add support to LS-UART0
Date: Tue, 21 Jun 2016 18:22:43 +0100 [thread overview]
Message-ID: <1466529769-2674-3-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1466529769-2674-1-git-send-email-srinivas.kandagatla@linaro.org>
This patch adds support to 4 pin UART0 on LS expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 01916a5..2851442 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -16,6 +16,7 @@
/ {
aliases {
serial0 = &blsp2_uart1;
+ serial1 = &blsp2_uart2;
};
chosen {
@@ -30,5 +31,13 @@
pinctrl-0 = <&blsp2_uart1_2pins_default>;
pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
};
+
+ serial@75b1000 {
+ label = "LS-UART0";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_4pins_default>;
+ pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+ };
};
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Andy Gross <andy.gross@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
David Brown <david.brown@linaro.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 2/8] arm64: dts: db820c: add support to LS-UART0
Date: Tue, 21 Jun 2016 18:22:43 +0100 [thread overview]
Message-ID: <1466529769-2674-3-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1466529769-2674-1-git-send-email-srinivas.kandagatla@linaro.org>
This patch adds support to 4 pin UART0 on LS expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 01916a5..2851442 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -16,6 +16,7 @@
/ {
aliases {
serial0 = &blsp2_uart1;
+ serial1 = &blsp2_uart2;
};
chosen {
@@ -30,5 +31,13 @@
pinctrl-0 = <&blsp2_uart1_2pins_default>;
pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
};
+
+ serial@75b1000 {
+ label = "LS-UART0";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_4pins_default>;
+ pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+ };
};
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: srinivas.kandagatla@linaro.org (Srinivas Kandagatla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/8] arm64: dts: db820c: add support to LS-UART0
Date: Tue, 21 Jun 2016 18:22:43 +0100 [thread overview]
Message-ID: <1466529769-2674-3-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1466529769-2674-1-git-send-email-srinivas.kandagatla@linaro.org>
This patch adds support to 4 pin UART0 on LS expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 01916a5..2851442 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -16,6 +16,7 @@
/ {
aliases {
serial0 = &blsp2_uart1;
+ serial1 = &blsp2_uart2;
};
chosen {
@@ -30,5 +31,13 @@
pinctrl-0 = <&blsp2_uart1_2pins_default>;
pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
};
+
+ serial at 75b1000 {
+ label = "LS-UART0";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_4pins_default>;
+ pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+ };
};
};
--
2.7.4
next prev parent reply other threads:[~2016-06-21 17:22 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 17:22 [PATCH v2 0/8] arm64: dts: db820c: Add basic board support Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` [PATCH v2 1/8] arm64: dts: db820c: add " Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-22 4:49 ` Bjorn Andersson
2016-06-22 4:49 ` Bjorn Andersson
2016-06-22 8:52 ` Srinivas Kandagatla
2016-06-22 8:52 ` Srinivas Kandagatla
[not found] ` <576A51BC.5090108-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-06-22 16:04 ` Bjorn Andersson
2016-06-22 16:04 ` Bjorn Andersson
2016-06-22 16:04 ` Bjorn Andersson
2016-06-22 13:06 ` Mark Rutland
2016-06-22 13:06 ` Mark Rutland
2016-06-21 17:22 ` Srinivas Kandagatla [this message]
2016-06-21 17:22 ` [PATCH v2 2/8] arm64: dts: db820c: add support to LS-UART0 Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` [PATCH v2 3/8] arm64: dts: db820c: add support to LS-I2C0 Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` [PATCH v2 4/8] arm64: dts: db820c: add support to LS-I2C1 Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` [PATCH v2 5/8] arm64: dts: db820c: add support to I2C on HS Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` [PATCH v2 6/8] arm64: dts: db820c: add support to LS-SPI0 Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` [PATCH v2 7/8] arm64: dts: db820c: add support to SPI on HS Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` [PATCH v2 8/8] arm64: dts: db820c: add support to external sd card Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
2016-06-21 17:22 ` Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466529769-2674-3-git-send-email-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.