[CI 01/15] drm/i915: Move panel's backlight setup next to panel init

[CI 01/15] drm/i915: Move panel's backlight setup next to panel init

[Chris Wilson]

Currently setting up the backlight for a panel is sometimes done
together with initialising the panel, and sometimes after the connector
is registered. The backlight setup does not depend upon connector
registration (i.e. access to sysfs/debugfs and the kobject hierachy) so
perform it consistently just after panel initialisation.

Note the discrepancy here as destroying the panel is done during
connector unregistration...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_drv.h  | 3 ++-
 drivers/gpu/drm/i915/intel_dsi.c  | 3 +--
 drivers/gpu/drm/i915/intel_lvds.c | 3 +--
 3 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 1f82dccfcd58..ca2de043b9ce 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1496,7 +1496,8 @@ void intel_gmch_panel_fitting(struct intel_crtc *crtc,
 			      int fitting_mode);
 void intel_panel_set_backlight_acpi(struct intel_connector *connector,
 				    u32 level, u32 max);
-int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe);
+int intel_panel_setup_backlight(struct drm_connector *connector,
+				enum pipe pipe);
 void intel_panel_enable_backlight(struct intel_connector *connector);
 void intel_panel_disable_backlight(struct intel_connector *connector);
 void intel_panel_destroy_backlight(struct drm_connector *connector);
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index b444d0e35a98..ae2dcaf1b52e 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1587,13 +1587,12 @@ void intel_dsi_init(struct drm_device *dev)
 	connector->display_info.height_mm = fixed_mode->height_mm;
 
 	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
+	intel_panel_setup_backlight(connector, INVALID_PIPE);
 
 	intel_dsi_add_properties(intel_connector);
 
 	drm_connector_register(connector);
 
-	intel_panel_setup_backlight(connector, INVALID_PIPE);
-
 	return;
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 935b53642948..6306c5499587 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -1120,6 +1120,7 @@ out:
 	mutex_unlock(&dev->mode_config.mutex);
 
 	intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
+	intel_panel_setup_backlight(connector, INVALID_PIPE);
 
 	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
 	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
@@ -1134,8 +1135,6 @@ out:
 	}
 	drm_connector_register(connector);
 
-	intel_panel_setup_backlight(connector, INVALID_PIPE);
-
 	return;
 
 failed:
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 02/15] drm/i915: Move registration actions to connector->late_register

[Chris Wilson]

With the introduction of a connector->func for callback from
drm_connector_register() we can move all the tasks that we want to do
upon registration into that callback. Later, this will allow us to
reorder the registration and defer it until after the device is setup
and ready for userspace.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c     | 48 ++++++++++++++++---------------------
 drivers/gpu/drm/i915/intel_dp_mst.c |  2 ++
 drivers/gpu/drm/i915/intel_sdvo.c   | 19 ++++++++-------
 3 files changed, 34 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 85f2801b16ed..d4e037e20fa1 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1249,35 +1249,18 @@ intel_dp_aux_fini(struct intel_dp *intel_dp)
 	kfree(intel_dp->aux.name);
 }
 
-static int
+static void
 intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	enum port port = intel_dig_port->port;
-	int ret;
 
 	intel_aux_reg_init(intel_dp);
+	drm_dp_aux_init(&intel_dp->aux);
 
+	/* Failure to allocate our preferred name is not critical */
 	intel_dp->aux.name = kasprintf(GFP_KERNEL, "DPDDC-%c", port_name(port));
-	if (!intel_dp->aux.name)
-		return -ENOMEM;
-
-	intel_dp->aux.dev = connector->base.kdev;
 	intel_dp->aux.transfer = intel_dp_aux_transfer;
-
-	DRM_DEBUG_KMS("registering %s bus for %s\n",
-		      intel_dp->aux.name,
-		      connector->base.kdev->kobj.name);
-
-	ret = drm_dp_aux_register(&intel_dp->aux);
-	if (ret < 0) {
-		DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
-			  intel_dp->aux.name, ret);
-		kfree(intel_dp->aux.name);
-		return ret;
-	}
-
-	return 0;
 }
 
 static int
@@ -4520,6 +4503,20 @@ done:
 	return 0;
 }
 
+static int
+intel_dp_connector_register(struct drm_connector *connector)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+
+	i915_debugfs_connector_add(connector);
+
+	DRM_DEBUG_KMS("registering %s bus for %s\n",
+		      intel_dp->aux.name, connector->kdev->kobj.name);
+
+	intel_dp->aux.dev = connector->kdev;
+	return drm_dp_aux_register(&intel_dp->aux);
+}
+
 static void
 intel_dp_connector_unregister(struct drm_connector *connector)
 {
@@ -4648,6 +4645,7 @@ static const struct drm_connector_funcs intel_dp_connector_funcs = {
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_dp_set_property,
 	.atomic_get_property = intel_connector_atomic_get_property,
+	.late_register = intel_dp_connector_register,
 	.early_unregister = intel_dp_connector_unregister,
 	.destroy = intel_dp_connector_destroy,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
@@ -5515,7 +5513,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	struct drm_device *dev = intel_encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum port port = intel_dig_port->port;
-	int type, ret;
+	int type;
 
 	if (WARN(intel_dig_port->max_lanes < 1,
 		 "Not enough lanes (%d) for DP on port %c\n",
@@ -5574,6 +5572,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	connector->interlace_allowed = true;
 	connector->doublescan_allowed = 0;
 
+	intel_dp_aux_init(intel_dp, intel_connector);
+
 	INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
 			  edp_panel_vdd_work);
 
@@ -5608,10 +5608,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		BUG();
 	}
 
-	ret = intel_dp_aux_init(intel_dp, intel_connector);
-	if (ret)
-		goto fail;
-
 	/* init MST on ports that can support it */
 	if (HAS_DP_MST(dev) &&
 	    (port == PORT_B || port == PORT_C || port == PORT_D))
@@ -5635,8 +5631,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
 	}
 
-	i915_debugfs_connector_add(connector);
-
 	return true;
 
 fail:
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 9646816604be..89e7c98f5693 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -477,9 +477,11 @@ static void intel_dp_register_mst_connector(struct drm_connector *connector)
 {
 	struct intel_connector *intel_connector = to_intel_connector(connector);
 	struct drm_device *dev = connector->dev;
+
 	drm_modeset_lock_all(dev);
 	intel_connector_add_to_fbdev(intel_connector);
 	drm_modeset_unlock_all(dev);
+
 	drm_connector_register(&intel_connector->base);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 02b4a6695528..580cc876a90f 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2177,6 +2177,16 @@ done:
 #undef CHECK_PROPERTY
 }
 
+static int
+intel_sdvo_connector_register(struct drm_connector *connector)
+{
+	struct intel_sdvo *sdvo = intel_attached_sdvo(connector);
+
+	return sysfs_create_link(&connector->kdev->kobj,
+				 &sdvo->ddc.dev.kobj,
+				 sdvo->ddc.dev.kobj.name);
+}
+
 static void
 intel_sdvo_connector_unregister(struct drm_connector *connector)
 {
@@ -2193,6 +2203,7 @@ static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_sdvo_set_property,
 	.atomic_get_property = intel_connector_atomic_get_property,
+	.late_register = intel_sdvo_connector_register,
 	.early_unregister = intel_sdvo_connector_unregister,
 	.destroy = intel_sdvo_destroy,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
@@ -2384,16 +2395,8 @@ intel_sdvo_connector_init(struct intel_sdvo_connector *connector,
 	if (ret < 0)
 		goto err1;
 
-	ret = sysfs_create_link(&drm_connector->kdev->kobj,
-				&encoder->ddc.dev.kobj,
-				encoder->ddc.dev.kobj.name);
-	if (ret < 0)
-		goto err2;
-
 	return 0;
 
-err2:
-	drm_connector_unregister(drm_connector);
 err1:
 	drm_connector_cleanup(drm_connector);
 
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 03/15] drm/i915: Move backlight registration to connector registration

[Chris Wilson]

Currently the backlight is being registered in the load phase (before
the display and its objects are registered). Move the backlight
registration into the analogous phase by performing it from the
connector registration, just after its creation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.h      |  1 +
 drivers/gpu/drm/i915/intel_crt.c     |  1 +
 drivers/gpu/drm/i915/intel_display.c | 15 ++++++++++++++-
 drivers/gpu/drm/i915/intel_dp.c      |  5 +++++
 drivers/gpu/drm/i915/intel_dp_mst.c  |  1 +
 drivers/gpu/drm/i915/intel_drv.h     |  6 +++++-
 drivers/gpu/drm/i915/intel_dsi.c     |  1 +
 drivers/gpu/drm/i915/intel_dvo.c     |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c    |  1 +
 drivers/gpu/drm/i915/intel_lvds.c    |  1 +
 drivers/gpu/drm/i915/intel_panel.c   | 15 +--------------
 drivers/gpu/drm/i915/intel_sdvo.c    |  5 +++++
 drivers/gpu/drm/i915/intel_tv.c      |  1 +
 13 files changed, 38 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6d96b14b53c8..42298a87db7e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3734,6 +3734,7 @@ extern void intel_modeset_init_hw(struct drm_device *dev);
 extern void intel_modeset_init(struct drm_device *dev);
 extern void intel_modeset_gem_init(struct drm_device *dev);
 extern void intel_modeset_cleanup(struct drm_device *dev);
+extern int intel_connector_register(struct drm_connector *);
 extern void intel_connector_unregister(struct drm_connector *);
 extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
 extern void intel_display_resume(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index e115bcc6766f..8d7d48c74751 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -743,6 +743,7 @@ static const struct drm_connector_funcs intel_crt_connector_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
+	.late_register = intel_connector_register,
 	.early_unregister = intel_connector_unregister,
 	.destroy = intel_crt_destroy,
 	.set_property = intel_crt_set_property,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 1141b8699dbe..12897d11df60 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -16314,8 +16314,21 @@ void intel_modeset_gem_init(struct drm_device *dev)
 			c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
 		}
 	}
+}
+
+int intel_connector_register(struct drm_connector *connector)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+	int ret;
+
+	ret = intel_backlight_device_register(intel_connector);
+	if (ret)
+		goto err;
+
+	return 0;
 
-	intel_backlight_register(dev);
+err:
+	return ret;
 }
 
 void intel_connector_unregister(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index d4e037e20fa1..30d410173816 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4507,6 +4507,11 @@ static int
 intel_dp_connector_register(struct drm_connector *connector)
 {
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	int ret;
+
+	ret = intel_connector_register(connector);
+	if (ret)
+		return ret;
 
 	i915_debugfs_connector_add(connector);
 
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 89e7c98f5693..5f88e12575ac 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -336,6 +336,7 @@ static const struct drm_connector_funcs intel_dp_mst_connector_funcs = {
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_dp_mst_set_property,
 	.atomic_get_property = intel_connector_atomic_get_property,
+	.late_register = intel_connector_register,
 	.early_unregister = intel_connector_unregister,
 	.destroy = intel_dp_mst_connector_destroy,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ca2de043b9ce..3156d8df7921 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1506,11 +1506,15 @@ extern struct drm_display_mode *intel_find_panel_downclock(
 				struct drm_device *dev,
 				struct drm_display_mode *fixed_mode,
 				struct drm_connector *connector);
-void intel_backlight_register(struct drm_device *dev);
 
 #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
+int intel_backlight_device_register(struct intel_connector *connector);
 void intel_backlight_device_unregister(struct intel_connector *connector);
 #else /* CONFIG_BACKLIGHT_CLASS_DEVICE */
+static int intel_backlight_device_register(struct intel_connector *connector)
+{
+	return 0;
+}
 static inline void intel_backlight_device_unregister(struct intel_connector *connector)
 {
 }
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index ae2dcaf1b52e..80cc0f9de6c9 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1390,6 +1390,7 @@ static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs
 static const struct drm_connector_funcs intel_dsi_connector_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = intel_dsi_detect,
+	.late_register = intel_connector_register,
 	.early_unregister = intel_connector_unregister,
 	.destroy = intel_dsi_connector_destroy,
 	.fill_modes = drm_helper_probe_single_connector_modes,
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 60e4ddf2ec6d..669eae46ffa9 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -341,6 +341,7 @@ static void intel_dvo_destroy(struct drm_connector *connector)
 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = intel_dvo_detect,
+	.late_register = intel_connector_register,
 	.early_unregister = intel_connector_unregister,
 	.destroy = intel_dvo_destroy,
 	.fill_modes = drm_helper_probe_single_connector_modes,
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index fb21626ada64..48ca48c9faff 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1774,6 +1774,7 @@ static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_hdmi_set_property,
 	.atomic_get_property = intel_connector_atomic_get_property,
+	.late_register = intel_connector_register,
 	.early_unregister = intel_connector_unregister,
 	.destroy = intel_hdmi_destroy,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6306c5499587..d4d06fb8de2e 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -555,6 +555,7 @@ static const struct drm_connector_funcs intel_lvds_connector_funcs = {
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_lvds_set_property,
 	.atomic_get_property = intel_connector_atomic_get_property,
+	.late_register = intel_connector_register,
 	.early_unregister = intel_connector_unregister,
 	.destroy = intel_lvds_destroy,
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index bf721781c259..3c0b97f0bfae 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1163,7 +1163,7 @@ static const struct backlight_ops intel_backlight_device_ops = {
 	.get_brightness = intel_backlight_device_get_brightness,
 };
 
-static int intel_backlight_device_register(struct intel_connector *connector)
+int intel_backlight_device_register(struct intel_connector *connector)
 {
 	struct intel_panel *panel = &connector->panel;
 	struct backlight_properties props;
@@ -1225,11 +1225,6 @@ void intel_backlight_device_unregister(struct intel_connector *connector)
 		panel->backlight.device = NULL;
 	}
 }
-#else /* CONFIG_BACKLIGHT_CLASS_DEVICE */
-static int intel_backlight_device_register(struct intel_connector *connector)
-{
-	return 0;
-}
 #endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */
 
 /*
@@ -1809,11 +1804,3 @@ void intel_panel_fini(struct intel_panel *panel)
 		drm_mode_destroy(intel_connector->base.dev,
 				panel->downclock_mode);
 }
-
-void intel_backlight_register(struct drm_device *dev)
-{
-	struct intel_connector *connector;
-
-	for_each_intel_connector(dev, connector)
-		intel_backlight_device_register(connector);
-}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 580cc876a90f..c0c0a65fabf3 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2181,6 +2181,11 @@ static int
 intel_sdvo_connector_register(struct drm_connector *connector)
 {
 	struct intel_sdvo *sdvo = intel_attached_sdvo(connector);
+	int ret;
+
+	ret = intel_connector_register(connector);
+	if (ret)
+		return ret;
 
 	return sysfs_create_link(&connector->kdev->kobj,
 				 &sdvo->ddc.dev.kobj,
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 4ce70a9f9df2..83fe6706a188 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1501,6 +1501,7 @@ out:
 static const struct drm_connector_funcs intel_tv_connector_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = intel_tv_detect,
+	.late_register = intel_connector_register,
 	.early_unregister = intel_connector_unregister,
 	.destroy = intel_tv_destroy,
 	.set_property = intel_tv_set_property,
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 04/15] drm/i915: Move connector registration to driver registration

[Chris Wilson]

Defer connector registration from during construction to the driver
registration phase. This is important for ordering the action correctly,
e.g. not using debugfs before it is ready.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c      |  2 ++
 drivers/gpu/drm/i915/i915_drv.h      |  2 ++
 drivers/gpu/drm/i915/intel_crt.c     |  2 --
 drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++--
 drivers/gpu/drm/i915/intel_dp.c      |  2 --
 drivers/gpu/drm/i915/intel_dsi.c     |  2 --
 drivers/gpu/drm/i915/intel_dvo.c     |  1 -
 drivers/gpu/drm/i915/intel_hdmi.c    |  1 -
 drivers/gpu/drm/i915/intel_lvds.c    |  1 -
 drivers/gpu/drm/i915/intel_sdvo.c    | 10 ----------
 drivers/gpu/drm/i915/intel_tv.c      |  1 -
 11 files changed, 14 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index e28c0ddc0837..29521c4b87a5 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1398,6 +1398,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 		I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
 
 	i915_setup_sysfs(dev);
+	intel_modeset_register(dev_priv);
 
 	if (INTEL_INFO(dev_priv)->num_pipes) {
 		/* Must be done after probing outputs */
@@ -1430,6 +1431,7 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
 	intel_gpu_ips_teardown();
 	acpi_video_unregister();
 	intel_opregion_unregister(dev_priv);
+	intel_modeset_unregister(dev_priv);
 	i915_teardown_sysfs(dev_priv->dev);
 	i915_gem_shrinker_cleanup(dev_priv);
 }
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 42298a87db7e..73683b54da7a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3734,6 +3734,8 @@ extern void intel_modeset_init_hw(struct drm_device *dev);
 extern void intel_modeset_init(struct drm_device *dev);
 extern void intel_modeset_gem_init(struct drm_device *dev);
 extern void intel_modeset_cleanup(struct drm_device *dev);
+extern void intel_modeset_register(struct drm_i915_private *dev_priv);
+extern void intel_modeset_unregister(struct drm_i915_private *dev_priv);
 extern int intel_connector_register(struct drm_connector *);
 extern void intel_connector_unregister(struct drm_connector *);
 extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 8d7d48c74751..165e4b901548 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -880,8 +880,6 @@ void intel_crt_init(struct drm_device *dev)
 
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
-	drm_connector_register(connector);
-
 	if (!I915_HAS_HOTPLUG(dev))
 		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 12897d11df60..798c175c37bf 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15551,6 +15551,16 @@ void intel_modeset_init_hw(struct drm_device *dev)
 	intel_enable_gt_powersave(dev_priv);
 }
 
+void intel_modeset_register(struct drm_i915_private *dev_priv)
+{
+	drm_connector_register_all(dev_priv->dev);
+}
+
+void intel_modeset_unregister(struct drm_i915_private *dev_priv)
+{
+	drm_connector_unregister_all(dev_priv->dev);
+}
+
 /*
  * Calculate what we think the watermarks should be for the state we've read
  * out of the hardware and then immediately program those watermarks so that
@@ -16365,8 +16375,6 @@ void intel_modeset_cleanup(struct drm_device *dev)
 	/* flush any delayed tasks or pending work */
 	flush_scheduled_work();
 
-	drm_connector_unregister_all(dev);
-
 	drm_mode_config_cleanup(dev);
 
 	intel_cleanup_overlay(dev_priv);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 30d410173816..c3742a04f611 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5583,7 +5583,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 			  edp_panel_vdd_work);
 
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
-	drm_connector_register(connector);
 
 	if (HAS_DDI(dev))
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
@@ -5639,7 +5638,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	return true;
 
 fail:
-	drm_connector_unregister(connector);
 	drm_connector_cleanup(connector);
 
 	return false;
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 80cc0f9de6c9..63b720061bd2 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1592,8 +1592,6 @@ void intel_dsi_init(struct drm_device *dev)
 
 	intel_dsi_add_properties(intel_connector);
 
-	drm_connector_register(connector);
-
 	return;
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 669eae46ffa9..14b1d3f333a4 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -551,7 +551,6 @@ void intel_dvo_init(struct drm_device *dev)
 			intel_dvo->panel_wants_dither = true;
 		}
 
-		drm_connector_register(connector);
 		return;
 	}
 
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 48ca48c9faff..86e1fdb70141 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1915,7 +1915,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 	intel_hdmi_add_properties(intel_hdmi, connector);
 
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
-	drm_connector_register(connector);
 	intel_hdmi->attached_connector = intel_connector;
 
 	/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index d4d06fb8de2e..cf680661454b 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -1134,7 +1134,6 @@ out:
 		DRM_DEBUG_KMS("lid notifier registration failed\n");
 		lvds_connector->lid_notifier.notifier_call = NULL;
 	}
-	drm_connector_register(connector);
 
 	return;
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index c0c0a65fabf3..ba28f5141687 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2396,16 +2396,8 @@ intel_sdvo_connector_init(struct intel_sdvo_connector *connector,
 	connector->base.get_hw_state = intel_sdvo_connector_get_hw_state;
 
 	intel_connector_attach_encoder(&connector->base, &encoder->base);
-	ret = drm_connector_register(drm_connector);
-	if (ret < 0)
-		goto err1;
 
 	return 0;
-
-err1:
-	drm_connector_cleanup(drm_connector);
-
-	return ret;
 }
 
 static void
@@ -2532,7 +2524,6 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
 	return true;
 
 err:
-	drm_connector_unregister(connector);
 	intel_sdvo_destroy(connector);
 	return false;
 }
@@ -2611,7 +2602,6 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
 	return true;
 
 err:
-	drm_connector_unregister(connector);
 	intel_sdvo_destroy(connector);
 	return false;
 }
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 83fe6706a188..153190475ebd 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1642,5 +1642,4 @@ intel_tv_init(struct drm_device *dev)
 	drm_object_attach_property(&connector->base,
 				   dev->mode_config.tv_bottom_margin_property,
 				   intel_tv->margin[TV_MARGIN_BOTTOM]);
-	drm_connector_register(connector);
 }
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 05/15] drm/i915: Register debugfs interface last

[Chris Wilson]

Currently debugfs files are created before the driver is even loads.
This gives the opportunity for userspace to open that interface and poke
around before the backing data structures are initialised - with the
possibility of oopsing or worse.

Move the creation of the debugfs files to our registration phase, where
we announce our presence to the world when we are ready, i.e the
sequence changes from

	drm_dev_register()
	 -> drm_minor_register()
	  -> drm_debugfs_init()
	   -> i915_debugfs_init()
	 -> i915_driver_load()

to

	drm_dev_register()
	 -> drm_minor_register()
	  -> drm_debugfs_init()
	 -> i915_driver_load()
	  -> i915_debugfs_register()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 6 ++++--
 drivers/gpu/drm/i915/i915_dma.c     | 2 ++
 drivers/gpu/drm/i915/i915_drv.c     | 4 ----
 drivers/gpu/drm/i915/i915_drv.h     | 6 ++++--
 4 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 9989b6a26b17..a8e0eb7e146c 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -5508,8 +5508,9 @@ void intel_display_crc_init(struct drm_device *dev)
 	}
 }
 
-int i915_debugfs_init(struct drm_minor *minor)
+int i915_debugfs_register(struct drm_i915_private *dev_priv)
 {
+	struct drm_minor *minor = dev_priv->dev->primary;
 	int ret, i;
 
 	ret = i915_forcewake_create(minor->debugfs_root, minor);
@@ -5535,8 +5536,9 @@ int i915_debugfs_init(struct drm_minor *minor)
 					minor->debugfs_root, minor);
 }
 
-void i915_debugfs_cleanup(struct drm_minor *minor)
+void i915_debugfs_unregister(struct drm_i915_private *dev_priv)
 {
+	struct drm_minor *minor = dev_priv->dev->primary;
 	int i;
 
 	drm_debugfs_remove_files(i915_debugfs_list,
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 29521c4b87a5..91623874f9a3 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1397,6 +1397,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 	if (intel_vgpu_active(dev_priv))
 		I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
 
+	i915_debugfs_register(dev_priv);
 	i915_setup_sysfs(dev);
 	intel_modeset_register(dev_priv);
 
@@ -1433,6 +1434,7 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
 	intel_opregion_unregister(dev_priv);
 	intel_modeset_unregister(dev_priv);
 	i915_teardown_sysfs(dev_priv->dev);
+	i915_debugfs_unregister(dev_priv);
 	i915_gem_shrinker_cleanup(dev_priv);
 }
 
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 3eb47fbcea73..3ea09bd83a5a 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1756,10 +1756,6 @@ static struct drm_driver driver = {
 	.postclose = i915_driver_postclose,
 	.set_busid = drm_pci_set_busid,
 
-#if defined(CONFIG_DEBUG_FS)
-	.debugfs_init = i915_debugfs_init,
-	.debugfs_cleanup = i915_debugfs_cleanup,
-#endif
 	.gem_free_object = i915_gem_free_object,
 	.gem_vm_ops = &i915_gem_vm_ops,
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 73683b54da7a..fe75f11d5e1b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3603,12 +3603,14 @@ int i915_verify_lists(struct drm_device *dev);
 #endif
 
 /* i915_debugfs.c */
-int i915_debugfs_init(struct drm_minor *minor);
-void i915_debugfs_cleanup(struct drm_minor *minor);
 #ifdef CONFIG_DEBUG_FS
+int i915_debugfs_register(struct drm_i915_private *dev_priv);
+void i915_debugfs_unregister(struct drm_i915_private *dev_priv);
 int i915_debugfs_connector_add(struct drm_connector *connector);
 void intel_display_crc_init(struct drm_device *dev);
 #else
+static inline int i915_debugfs_register(struct drm_i915_private *) {return 0;}
+static inline void i915_debugfs_unregister(struct drm_i915_private *) {}
 static inline int i915_debugfs_connector_add(struct drm_connector *connector)
 { return 0; }
 static inline void intel_display_crc_init(struct drm_device *dev) {}
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 06/15] drm/i915: Demidlayer driver loading

[Chris Wilson]

Take control over allocating, loading and registering the driver from the
DRM midlayer by performing it manually from i915_pci_probe. This allows
us to carefully control the order of when we setup the hardware vs when
it becomes visible to third parties (including userspace). The current
ordering makes the driver visible to userspace first (in order to
coordinate with removed DRI1 userspace), but that ordering incurs risk.
The risk increases as we strive for more asynchronous loading.

One side effect of controlling the allocation is that we can allocate
both the drm_device + drm_i915_private in one block, the next step
towards subclassing.

Unload is still left as before, a mix of midlayer and driver.

v2: After drm_dev_init(), we should call drm_dev_unref() so that we call
drm_dev_release() and free everything from drm_dev_init().
v3: Fixup missed error code for failing to allocate dev_priv

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c | 78 ++++++++++++++++++++++++++---------------
 drivers/gpu/drm/i915/i915_drv.c |  3 +-
 drivers/gpu/drm/i915/i915_drv.h |  6 +++-
 3 files changed, 55 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 91623874f9a3..5003962ec5b8 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1075,9 +1075,10 @@ static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
  * function hooks not requiring accessing the device.
  */
 static int i915_driver_init_early(struct drm_i915_private *dev_priv,
-				  struct drm_device *dev,
-				  struct intel_device_info *info)
+				  const struct pci_device_id *ent)
 {
+	const struct intel_device_info *match_info =
+		(struct intel_device_info *)ent->driver_data;
 	struct intel_device_info *device_info;
 	int ret = 0;
 
@@ -1086,8 +1087,8 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
 
 	/* Setup the write-once "constant" device info */
 	device_info = (struct intel_device_info *)&dev_priv->info;
-	memcpy(device_info, info, sizeof(dev_priv->info));
-	device_info->device_id = dev->pdev->device;
+	memcpy(device_info, match_info, sizeof(*device_info));
+	device_info->device_id = dev_priv->drm.pdev->device;
 
 	BUG_ON(device_info->gen > sizeof(device_info->gen_mask) * BITS_PER_BYTE);
 	device_info->gen_mask = BIT(device_info->gen - 1);
@@ -1113,18 +1114,18 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
 		goto err_workqueues;
 
 	/* This must be called before any calls to HAS_PCH_* */
-	intel_detect_pch(dev);
+	intel_detect_pch(&dev_priv->drm);
 
-	intel_pm_setup(dev);
+	intel_pm_setup(&dev_priv->drm);
 	intel_init_dpio(dev_priv);
 	intel_power_domains_init(dev_priv);
 	intel_irq_init(dev_priv);
 	intel_init_display_hooks(dev_priv);
 	intel_init_clock_gating_hooks(dev_priv);
 	intel_init_audio_hooks(dev_priv);
-	i915_gem_load_init(dev);
+	i915_gem_load_init(&dev_priv->drm);
 
-	intel_display_crc_init(dev);
+	intel_display_crc_init(&dev_priv->drm);
 
 	i915_dump_device_info(dev_priv);
 
@@ -1132,7 +1133,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
 	 * very first ones. Almost everything should work, except for maybe
 	 * suspend/resume. And we don't implement workarounds that affect only
 	 * pre-production machines. */
-	if (IS_HSW_EARLY_SDV(dev))
+	if (IS_HSW_EARLY_SDV(dev_priv))
 		DRM_INFO("This is an early pre-production Haswell machine. "
 			 "It may not be fully functional.\n");
 
@@ -1390,6 +1391,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 	struct drm_device *dev = dev_priv->dev;
 
 	i915_gem_shrinker_init(dev_priv);
+
 	/*
 	 * Notify a valid surface after modesetting,
 	 * when running inside a VM.
@@ -1397,9 +1399,13 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 	if (intel_vgpu_active(dev_priv))
 		I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
 
-	i915_debugfs_register(dev_priv);
-	i915_setup_sysfs(dev);
-	intel_modeset_register(dev_priv);
+	/* Reveal our presence to userspace */
+	if (drm_dev_register(dev, 0) == 0) {
+		i915_debugfs_register(dev_priv);
+		i915_setup_sysfs(dev);
+		intel_modeset_register(dev_priv);
+	} else
+		DRM_ERROR("Failed to register driver for userspace access!\n");
 
 	if (INTEL_INFO(dev_priv)->num_pipes) {
 		/* Must be done after probing outputs */
@@ -1449,24 +1455,38 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
  *   - allocate initial config memory
  *   - setup the DRM framebuffer with the allocated memory
  */
-int i915_driver_load(struct drm_device *dev, unsigned long flags)
+int i915_driver_load(struct pci_dev *pdev,
+		     const struct pci_device_id *ent,
+		     struct drm_driver *driver)
 {
 	struct drm_i915_private *dev_priv;
-	int ret = 0;
+	int ret;
 
+	ret = -ENOMEM;
 	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
-	if (dev_priv == NULL)
-		return -ENOMEM;
+	if (dev_priv)
+		ret = drm_dev_init(&dev_priv->drm, driver, &pdev->dev);
+	if (ret) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "[" DRM_NAME ":%s] allocation failed\n", __func__);
+		kfree(dev_priv);
+		return ret;
+	}
 
-	dev->dev_private = dev_priv;
 	/* Must be set before calling __i915_printk */
-	dev_priv->dev = dev;
+	dev_priv->drm.pdev = pdev;
+	dev_priv->drm.dev_private = dev_priv;
+	dev_priv->dev = &dev_priv->drm;
 
-	ret = i915_driver_init_early(dev_priv, dev,
-				     (struct intel_device_info *)flags);
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto out_free_priv;
+
+	pci_set_drvdata(pdev, &dev_priv->drm);
 
+	ret = i915_driver_init_early(dev_priv, ent);
 	if (ret < 0)
-		goto out_free_priv;
+		goto out_pci_disable;
 
 	intel_runtime_pm_get(dev_priv);
 
@@ -1483,13 +1503,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	 * of the i915_driver_init_/i915_driver_register functions according
 	 * to the role/effect of the given init step.
 	 */
-	if (INTEL_INFO(dev)->num_pipes) {
-		ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes);
+	if (INTEL_INFO(dev_priv)->num_pipes) {
+		ret = drm_vblank_init(dev_priv->dev,
+				      INTEL_INFO(dev_priv)->num_pipes);
 		if (ret)
 			goto out_cleanup_hw;
 	}
 
-	ret = i915_load_modeset_init(dev);
+	ret = i915_load_modeset_init(dev_priv->dev);
 	if (ret < 0)
 		goto out_cleanup_vblank;
 
@@ -1502,7 +1523,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	return 0;
 
 out_cleanup_vblank:
-	drm_vblank_cleanup(dev);
+	drm_vblank_cleanup(dev_priv->dev);
 out_cleanup_hw:
 	i915_driver_cleanup_hw(dev_priv);
 out_cleanup_mmio:
@@ -1510,11 +1531,11 @@ out_cleanup_mmio:
 out_runtime_pm_put:
 	intel_runtime_pm_put(dev_priv);
 	i915_driver_cleanup_early(dev_priv);
+out_pci_disable:
+	pci_disable_device(pdev);
 out_free_priv:
 	i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
-
-	kfree(dev_priv);
-
+	drm_dev_unref(&dev_priv->drm);
 	return ret;
 }
 
@@ -1579,7 +1600,6 @@ int i915_driver_unload(struct drm_device *dev)
 	intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
 
 	i915_driver_cleanup_early(dev_priv);
-	kfree(dev_priv);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 3ea09bd83a5a..1a335e1a8b62 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1034,7 +1034,7 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (vga_switcheroo_client_probe_defer(pdev))
 		return -EPROBE_DEFER;
 
-	return drm_get_pci_dev(pdev, ent, &driver);
+	return i915_driver_load(pdev, ent, &driver);
 }
 
 static void
@@ -1748,7 +1748,6 @@ static struct drm_driver driver = {
 	.driver_features =
 	    DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
 	    DRIVER_RENDER | DRIVER_MODESET,
-	.load = i915_driver_load,
 	.unload = i915_driver_unload,
 	.open = i915_driver_open,
 	.lastclose = i915_driver_lastclose,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index fe75f11d5e1b..3e94edb1a9e1 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1733,6 +1733,8 @@ struct intel_wm_config {
 };
 
 struct drm_i915_private {
+	struct drm_device drm;
+
 	struct drm_device *dev;
 	struct kmem_cache *objects;
 	struct kmem_cache *vmas;
@@ -2909,7 +2911,9 @@ __i915_printk(struct drm_i915_private *dev_priv, const char *level,
 #define i915_report_error(dev_priv, fmt, ...)				   \
 	__i915_printk(dev_priv, KERN_ERR, fmt, ##__VA_ARGS__)
 
-extern int i915_driver_load(struct drm_device *, unsigned long flags);
+extern int i915_driver_load(struct pci_dev *pdev,
+			    const struct pci_device_id *ent,
+			    struct drm_driver *driver);
 extern int i915_driver_unload(struct drm_device *);
 extern int i915_driver_open(struct drm_device *dev, struct drm_file *file);
 extern void i915_driver_lastclose(struct drm_device * dev);
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 07/15] drm/i915: Demidlayer driver unloading

[Chris Wilson]

To complete the transition to manual control of load/unload, we need to
take over unloading from i915_pci_remove(). This allows us to correctly
order our unregister vs shutdown phases, which currently are inverted
due to the midlayer.

However, the unload sequence is still invalid as we shutdown the driver
with the last reference. Ideally, all we want to do is remove the
userspace access on device removal, deferring the cleanup to the
drm_dev_release() - breaking the reference cycles is then left as an
exercise for the reader.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c | 4 ++++
 drivers/gpu/drm/i915/i915_drv.c | 4 ++--
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5003962ec5b8..a9c2f635aaab 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1435,12 +1435,16 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 static void i915_driver_unregister(struct drm_i915_private *dev_priv)
 {
 	i915_audio_component_cleanup(dev_priv);
+
 	intel_gpu_ips_teardown();
 	acpi_video_unregister();
 	intel_opregion_unregister(dev_priv);
+
 	intel_modeset_unregister(dev_priv);
 	i915_teardown_sysfs(dev_priv->dev);
 	i915_debugfs_unregister(dev_priv);
+	drm_dev_unregister(dev_priv->dev);
+
 	i915_gem_shrinker_cleanup(dev_priv);
 }
 
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 1a335e1a8b62..9ddae6add9e0 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1042,7 +1042,8 @@ i915_pci_remove(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
 
-	drm_put_dev(dev);
+	i915_driver_unload(dev);
+	drm_dev_unref(dev);
 }
 
 static int i915_pm_suspend(struct device *dev)
@@ -1748,7 +1749,6 @@ static struct drm_driver driver = {
 	.driver_features =
 	    DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
 	    DRIVER_RENDER | DRIVER_MODESET,
-	.unload = i915_driver_unload,
 	.open = i915_driver_open,
 	.lastclose = i915_driver_lastclose,
 	.preclose = i915_driver_preclose,
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 08/15] drm/i915: Remove redundant drm_connector_register_all()

[Chris Wilson]

drm_connector_register_all() is now automatically called by
drm_dev_register(), and so we no longer have to do so ourselves (via
intel_modeset_register() after calling drm_dev_register()). Similarly
for unregistering.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_dma.c      |  2 --
 drivers/gpu/drm/i915/i915_drv.h      |  2 --
 drivers/gpu/drm/i915/intel_display.c | 10 ----------
 3 files changed, 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index a9c2f635aaab..77c3e2373ad9 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1403,7 +1403,6 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 	if (drm_dev_register(dev, 0) == 0) {
 		i915_debugfs_register(dev_priv);
 		i915_setup_sysfs(dev);
-		intel_modeset_register(dev_priv);
 	} else
 		DRM_ERROR("Failed to register driver for userspace access!\n");
 
@@ -1440,7 +1439,6 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
 	acpi_video_unregister();
 	intel_opregion_unregister(dev_priv);
 
-	intel_modeset_unregister(dev_priv);
 	i915_teardown_sysfs(dev_priv->dev);
 	i915_debugfs_unregister(dev_priv);
 	drm_dev_unregister(dev_priv->dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 3e94edb1a9e1..520ee8a6bb7a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3740,8 +3740,6 @@ extern void intel_modeset_init_hw(struct drm_device *dev);
 extern void intel_modeset_init(struct drm_device *dev);
 extern void intel_modeset_gem_init(struct drm_device *dev);
 extern void intel_modeset_cleanup(struct drm_device *dev);
-extern void intel_modeset_register(struct drm_i915_private *dev_priv);
-extern void intel_modeset_unregister(struct drm_i915_private *dev_priv);
 extern int intel_connector_register(struct drm_connector *);
 extern void intel_connector_unregister(struct drm_connector *);
 extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 798c175c37bf..c3257177d527 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15551,16 +15551,6 @@ void intel_modeset_init_hw(struct drm_device *dev)
 	intel_enable_gt_powersave(dev_priv);
 }
 
-void intel_modeset_register(struct drm_i915_private *dev_priv)
-{
-	drm_connector_register_all(dev_priv->dev);
-}
-
-void intel_modeset_unregister(struct drm_i915_private *dev_priv)
-{
-	drm_connector_unregister_all(dev_priv->dev);
-}
-
 /*
  * Calculate what we think the watermarks should be for the state we've read
  * out of the hardware and then immediately program those watermarks so that
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 09/15] drm/i915: Start exploiting drm_device subclassing

[Chris Wilson]

Baby step, update to_i915() conversion from drm_device to
drm_i915_private:

   text	   data	    bss	    dec	    hex	filename
1108812	  23207	    416	1132435	 114793	i915.ko (before)
1104999	  23207	    416	1128622	 1138ae	i915.ko (after)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 520ee8a6bb7a..e0fc47b8b7ee 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2046,7 +2046,7 @@ struct drm_i915_private {
 
 static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
 {
-	return dev->dev_private;
+	return container_of(dev, struct drm_i915_private, drm);
 }
 
 static inline struct drm_i915_private *dev_to_i915(struct device *dev)
@@ -2622,7 +2622,7 @@ struct drm_i915_cmd_table {
 #define INTEL_DEVID(p)	(INTEL_INFO(p)->device_id)
 
 #define REVID_FOREVER		0xff
-#define INTEL_REVID(p)	(__I915__(p)->dev->pdev->revision)
+#define INTEL_REVID(p)	(__I915__(p)->drm.pdev->revision)
 
 #define GEN_FOREVER (0)
 /*
@@ -3501,7 +3501,7 @@ i915_gem_context_lookup(struct drm_i915_file_private *file_priv, u32 id)
 {
 	struct i915_gem_context *ctx;
 
-	lockdep_assert_held(&file_priv->dev_priv->dev->struct_mutex);
+	lockdep_assert_held(&file_priv->dev_priv->drm.struct_mutex);
 
 	ctx = idr_find(&file_priv->context_idr, id);
 	if (!ctx)
@@ -3517,7 +3517,7 @@ static inline void i915_gem_context_reference(struct i915_gem_context *ctx)
 
 static inline void i915_gem_context_unreference(struct i915_gem_context *ctx)
 {
-	lockdep_assert_held(&ctx->i915->dev->struct_mutex);
+	lockdep_assert_held(&ctx->i915->drm.struct_mutex);
 	kref_put(&ctx->ref, i915_gem_context_free);
 }
 
@@ -3593,7 +3593,7 @@ void i915_gem_shrinker_cleanup(struct drm_i915_private *dev_priv);
 /* i915_gem_tiling.c */
 static inline bool i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
 {
-	struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+	struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
 
 	return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
 		obj->tiling_mode != I915_TILING_NONE;
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 10/15] drm/i915: Merge i915_dma.c into i915_drv.c

[Chris Wilson]

i915_dma.c used to contain the DRI1/UMS horror show, but now all that
remains are the out-of-place driver level interfaces (such as
allocating, initialising and registering the driver). These should be in
i915_drv.c alongside similar routines for suspend/resume.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/Makefile   |    3 -
 drivers/gpu/drm/i915/i915_dma.c | 1715 --------------------------------
 drivers/gpu/drm/i915/i915_drv.c | 2085 +++++++++++++++++++++++++++++++++++----
 drivers/gpu/drm/i915/i915_drv.h |   16 +-
 4 files changed, 1876 insertions(+), 1943 deletions(-)
 delete mode 100644 drivers/gpu/drm/i915/i915_dma.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 276abf1cac2b..c07cfb649f32 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -101,9 +101,6 @@ i915-y += dvo_ch7017.o \
 # virtual gpu code
 i915-y += i915_vgpu.o
 
-# legacy horrors
-i915-y += i915_dma.o
-
 ifeq ($(CONFIG_DRM_I915_GVT),y)
 i915-y += intel_gvt.o
 include $(src)/gvt/Makefile
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
deleted file mode 100644
index 77c3e2373ad9..000000000000
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ /dev/null
@@ -1,1715 +0,0 @@
-/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
- */
-/*
- * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sub license, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
- * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
- * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
- * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
- * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_helper.h>
-#include <drm/drm_legacy.h>
-#include "intel_drv.h"
-#include <drm/i915_drm.h>
-#include "i915_drv.h"
-#include "i915_vgpu.h"
-#include "i915_trace.h"
-#include <linux/pci.h>
-#include <linux/console.h>
-#include <linux/vt.h>
-#include <linux/vgaarb.h>
-#include <linux/acpi.h>
-#include <linux/pnp.h>
-#include <linux/vga_switcheroo.h>
-#include <linux/slab.h>
-#include <acpi/video.h>
-#include <linux/pm.h>
-#include <linux/pm_runtime.h>
-#include <linux/oom.h>
-
-static unsigned int i915_load_fail_count;
-
-bool __i915_inject_load_failure(const char *func, int line)
-{
-	if (i915_load_fail_count >= i915.inject_load_failure)
-		return false;
-
-	if (++i915_load_fail_count == i915.inject_load_failure) {
-		DRM_INFO("Injecting failure at checkpoint %u [%s:%d]\n",
-			 i915.inject_load_failure, func, line);
-		return true;
-	}
-
-	return false;
-}
-
-#define FDO_BUG_URL "https://bugs.freedesktop.org/enter_bug.cgi?product=DRI"
-#define FDO_BUG_MSG "Please file a bug at " FDO_BUG_URL " against DRM/Intel " \
-		    "providing the dmesg log by booting with drm.debug=0xf"
-
-void
-__i915_printk(struct drm_i915_private *dev_priv, const char *level,
-	      const char *fmt, ...)
-{
-	static bool shown_bug_once;
-	struct device *dev = dev_priv->dev->dev;
-	bool is_error = level[1] <= KERN_ERR[1];
-	bool is_debug = level[1] == KERN_DEBUG[1];
-	struct va_format vaf;
-	va_list args;
-
-	if (is_debug && !(drm_debug & DRM_UT_DRIVER))
-		return;
-
-	va_start(args, fmt);
-
-	vaf.fmt = fmt;
-	vaf.va = &args;
-
-	dev_printk(level, dev, "[" DRM_NAME ":%ps] %pV",
-		   __builtin_return_address(0), &vaf);
-
-	if (is_error && !shown_bug_once) {
-		dev_notice(dev, "%s", FDO_BUG_MSG);
-		shown_bug_once = true;
-	}
-
-	va_end(args);
-}
-
-static bool i915_error_injected(struct drm_i915_private *dev_priv)
-{
-	return i915.inject_load_failure &&
-	       i915_load_fail_count == i915.inject_load_failure;
-}
-
-#define i915_load_error(dev_priv, fmt, ...)				     \
-	__i915_printk(dev_priv,						     \
-		      i915_error_injected(dev_priv) ? KERN_DEBUG : KERN_ERR, \
-		      fmt, ##__VA_ARGS__)
-
-static int i915_getparam(struct drm_device *dev, void *data,
-			 struct drm_file *file_priv)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	drm_i915_getparam_t *param = data;
-	int value;
-
-	switch (param->param) {
-	case I915_PARAM_IRQ_ACTIVE:
-	case I915_PARAM_ALLOW_BATCHBUFFER:
-	case I915_PARAM_LAST_DISPATCH:
-		/* Reject all old ums/dri params. */
-		return -ENODEV;
-	case I915_PARAM_CHIPSET_ID:
-		value = dev->pdev->device;
-		break;
-	case I915_PARAM_REVISION:
-		value = dev->pdev->revision;
-		break;
-	case I915_PARAM_HAS_GEM:
-		value = 1;
-		break;
-	case I915_PARAM_NUM_FENCES_AVAIL:
-		value = dev_priv->num_fence_regs;
-		break;
-	case I915_PARAM_HAS_OVERLAY:
-		value = dev_priv->overlay ? 1 : 0;
-		break;
-	case I915_PARAM_HAS_PAGEFLIPPING:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_EXECBUF2:
-		/* depends on GEM */
-		value = 1;
-		break;
-	case I915_PARAM_HAS_BSD:
-		value = intel_engine_initialized(&dev_priv->engine[VCS]);
-		break;
-	case I915_PARAM_HAS_BLT:
-		value = intel_engine_initialized(&dev_priv->engine[BCS]);
-		break;
-	case I915_PARAM_HAS_VEBOX:
-		value = intel_engine_initialized(&dev_priv->engine[VECS]);
-		break;
-	case I915_PARAM_HAS_BSD2:
-		value = intel_engine_initialized(&dev_priv->engine[VCS2]);
-		break;
-	case I915_PARAM_HAS_RELAXED_FENCING:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_COHERENT_RINGS:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_EXEC_CONSTANTS:
-		value = INTEL_INFO(dev)->gen >= 4;
-		break;
-	case I915_PARAM_HAS_RELAXED_DELTA:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_GEN7_SOL_RESET:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_LLC:
-		value = HAS_LLC(dev);
-		break;
-	case I915_PARAM_HAS_WT:
-		value = HAS_WT(dev);
-		break;
-	case I915_PARAM_HAS_ALIASING_PPGTT:
-		value = USES_PPGTT(dev);
-		break;
-	case I915_PARAM_HAS_WAIT_TIMEOUT:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_SEMAPHORES:
-		value = i915_semaphore_is_enabled(dev_priv);
-		break;
-	case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_SECURE_BATCHES:
-		value = capable(CAP_SYS_ADMIN);
-		break;
-	case I915_PARAM_HAS_PINNED_BATCHES:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_EXEC_NO_RELOC:
-		value = 1;
-		break;
-	case I915_PARAM_HAS_EXEC_HANDLE_LUT:
-		value = 1;
-		break;
-	case I915_PARAM_CMD_PARSER_VERSION:
-		value = i915_cmd_parser_get_version(dev_priv);
-		break;
-	case I915_PARAM_HAS_COHERENT_PHYS_GTT:
-		value = 1;
-		break;
-	case I915_PARAM_MMAP_VERSION:
-		value = 1;
-		break;
-	case I915_PARAM_SUBSLICE_TOTAL:
-		value = INTEL_INFO(dev)->subslice_total;
-		if (!value)
-			return -ENODEV;
-		break;
-	case I915_PARAM_EU_TOTAL:
-		value = INTEL_INFO(dev)->eu_total;
-		if (!value)
-			return -ENODEV;
-		break;
-	case I915_PARAM_HAS_GPU_RESET:
-		value = i915.enable_hangcheck && intel_has_gpu_reset(dev_priv);
-		break;
-	case I915_PARAM_HAS_RESOURCE_STREAMER:
-		value = HAS_RESOURCE_STREAMER(dev);
-		break;
-	case I915_PARAM_HAS_EXEC_SOFTPIN:
-		value = 1;
-		break;
-	default:
-		DRM_DEBUG("Unknown parameter %d\n", param->param);
-		return -EINVAL;
-	}
-
-	if (copy_to_user(param->value, &value, sizeof(int))) {
-		DRM_ERROR("copy_to_user failed\n");
-		return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int i915_get_bridge_dev(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
-	if (!dev_priv->bridge_dev) {
-		DRM_ERROR("bridge device not found\n");
-		return -1;
-	}
-	return 0;
-}
-
-/* Allocate space for the MCH regs if needed, return nonzero on error */
-static int
-intel_alloc_mchbar_resource(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
-	u32 temp_lo, temp_hi = 0;
-	u64 mchbar_addr;
-	int ret;
-
-	if (INTEL_INFO(dev)->gen >= 4)
-		pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
-	pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
-	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
-
-	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
-#ifdef CONFIG_PNP
-	if (mchbar_addr &&
-	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
-		return 0;
-#endif
-
-	/* Get some space for it */
-	dev_priv->mch_res.name = "i915 MCHBAR";
-	dev_priv->mch_res.flags = IORESOURCE_MEM;
-	ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
-				     &dev_priv->mch_res,
-				     MCHBAR_SIZE, MCHBAR_SIZE,
-				     PCIBIOS_MIN_MEM,
-				     0, pcibios_align_resource,
-				     dev_priv->bridge_dev);
-	if (ret) {
-		DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
-		dev_priv->mch_res.start = 0;
-		return ret;
-	}
-
-	if (INTEL_INFO(dev)->gen >= 4)
-		pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
-				       upper_32_bits(dev_priv->mch_res.start));
-
-	pci_write_config_dword(dev_priv->bridge_dev, reg,
-			       lower_32_bits(dev_priv->mch_res.start));
-	return 0;
-}
-
-/* Setup MCHBAR if possible, return true if we should disable it again */
-static void
-intel_setup_mchbar(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
-	u32 temp;
-	bool enabled;
-
-	if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
-		return;
-
-	dev_priv->mchbar_need_disable = false;
-
-	if (IS_I915G(dev) || IS_I915GM(dev)) {
-		pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp);
-		enabled = !!(temp & DEVEN_MCHBAR_EN);
-	} else {
-		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
-		enabled = temp & 1;
-	}
-
-	/* If it's already enabled, don't have to do anything */
-	if (enabled)
-		return;
-
-	if (intel_alloc_mchbar_resource(dev))
-		return;
-
-	dev_priv->mchbar_need_disable = true;
-
-	/* Space is allocated or reserved, so enable it. */
-	if (IS_I915G(dev) || IS_I915GM(dev)) {
-		pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
-				       temp | DEVEN_MCHBAR_EN);
-	} else {
-		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
-		pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
-	}
-}
-
-static void
-intel_teardown_mchbar(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
-
-	if (dev_priv->mchbar_need_disable) {
-		if (IS_I915G(dev) || IS_I915GM(dev)) {
-			u32 deven_val;
-
-			pci_read_config_dword(dev_priv->bridge_dev, DEVEN,
-					      &deven_val);
-			deven_val &= ~DEVEN_MCHBAR_EN;
-			pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
-					       deven_val);
-		} else {
-			u32 mchbar_val;
-
-			pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg,
-					      &mchbar_val);
-			mchbar_val &= ~1;
-			pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg,
-					       mchbar_val);
-		}
-	}
-
-	if (dev_priv->mch_res.start)
-		release_resource(&dev_priv->mch_res);
-}
-
-/* true = enable decode, false = disable decoder */
-static unsigned int i915_vga_set_decode(void *cookie, bool state)
-{
-	struct drm_device *dev = cookie;
-
-	intel_modeset_vga_set_state(dev, state);
-	if (state)
-		return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
-		       VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
-	else
-		return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
-}
-
-static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
-{
-	struct drm_device *dev = pci_get_drvdata(pdev);
-	pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
-
-	if (state == VGA_SWITCHEROO_ON) {
-		pr_info("switched on\n");
-		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
-		/* i915 resume handler doesn't set to D0 */
-		pci_set_power_state(dev->pdev, PCI_D0);
-		i915_resume_switcheroo(dev);
-		dev->switch_power_state = DRM_SWITCH_POWER_ON;
-	} else {
-		pr_info("switched off\n");
-		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
-		i915_suspend_switcheroo(dev, pmm);
-		dev->switch_power_state = DRM_SWITCH_POWER_OFF;
-	}
-}
-
-static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
-{
-	struct drm_device *dev = pci_get_drvdata(pdev);
-
-	/*
-	 * FIXME: open_count is protected by drm_global_mutex but that would lead to
-	 * locking inversion with the driver load path. And the access here is
-	 * completely racy anyway. So don't bother with locking for now.
-	 */
-	return dev->open_count == 0;
-}
-
-static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
-	.set_gpu_state = i915_switcheroo_set_state,
-	.reprobe = NULL,
-	.can_switch = i915_switcheroo_can_switch,
-};
-
-static void i915_gem_fini(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-
-	/*
-	 * Neither the BIOS, ourselves or any other kernel
-	 * expects the system to be in execlists mode on startup,
-	 * so we need to reset the GPU back to legacy mode. And the only
-	 * known way to disable logical contexts is through a GPU reset.
-	 *
-	 * So in order to leave the system in a known default configuration,
-	 * always reset the GPU upon unload. Afterwards we then clean up the
-	 * GEM state tracking, flushing off the requests and leaving the
-	 * system in a known idle state.
-	 *
-	 * Note that is of the upmost importance that the GPU is idle and
-	 * all stray writes are flushed *before* we dismantle the backing
-	 * storage for the pinned objects.
-	 *
-	 * However, since we are uncertain that reseting the GPU on older
-	 * machines is a good idea, we don't - just in case it leaves the
-	 * machine in an unusable condition.
-	 */
-	if (HAS_HW_CONTEXTS(dev)) {
-		int reset = intel_gpu_reset(dev_priv, ALL_ENGINES);
-		WARN_ON(reset && reset != -ENODEV);
-	}
-
-	mutex_lock(&dev->struct_mutex);
-	i915_gem_reset(dev);
-	i915_gem_cleanup_engines(dev);
-	i915_gem_context_fini(dev);
-	mutex_unlock(&dev->struct_mutex);
-
-	WARN_ON(!list_empty(&to_i915(dev)->context_list));
-}
-
-static int i915_load_modeset_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret;
-
-	if (i915_inject_load_failure())
-		return -ENODEV;
-
-	ret = intel_bios_init(dev_priv);
-	if (ret)
-		DRM_INFO("failed to find VBIOS tables\n");
-
-	/* If we have > 1 VGA cards, then we need to arbitrate access
-	 * to the common VGA resources.
-	 *
-	 * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
-	 * then we do not take part in VGA arbitration and the
-	 * vga_client_register() fails with -ENODEV.
-	 */
-	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
-	if (ret && ret != -ENODEV)
-		goto out;
-
-	intel_register_dsm_handler();
-
-	ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false);
-	if (ret)
-		goto cleanup_vga_client;
-
-	/* must happen before intel_power_domains_init_hw() on VLV/CHV */
-	intel_update_rawclk(dev_priv);
-
-	intel_power_domains_init_hw(dev_priv, false);
-
-	intel_csr_ucode_init(dev_priv);
-
-	ret = intel_irq_install(dev_priv);
-	if (ret)
-		goto cleanup_csr;
-
-	intel_setup_gmbus(dev);
-
-	/* Important: The output setup functions called by modeset_init need
-	 * working irqs for e.g. gmbus and dp aux transfers. */
-	intel_modeset_init(dev);
-
-	intel_guc_init(dev);
-
-	ret = i915_gem_init(dev);
-	if (ret)
-		goto cleanup_irq;
-
-	intel_modeset_gem_init(dev);
-
-	if (INTEL_INFO(dev)->num_pipes == 0)
-		return 0;
-
-	ret = intel_fbdev_init(dev);
-	if (ret)
-		goto cleanup_gem;
-
-	/* Only enable hotplug handling once the fbdev is fully set up. */
-	intel_hpd_init(dev_priv);
-
-	drm_kms_helper_poll_init(dev);
-
-	return 0;
-
-cleanup_gem:
-	i915_gem_fini(dev);
-cleanup_irq:
-	intel_guc_fini(dev);
-	drm_irq_uninstall(dev);
-	intel_teardown_gmbus(dev);
-cleanup_csr:
-	intel_csr_ucode_fini(dev_priv);
-	intel_power_domains_fini(dev_priv);
-	vga_switcheroo_unregister_client(dev->pdev);
-cleanup_vga_client:
-	vga_client_register(dev->pdev, NULL, NULL, NULL);
-out:
-	return ret;
-}
-
-#if IS_ENABLED(CONFIG_FB)
-static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
-{
-	struct apertures_struct *ap;
-	struct pci_dev *pdev = dev_priv->dev->pdev;
-	struct i915_ggtt *ggtt = &dev_priv->ggtt;
-	bool primary;
-	int ret;
-
-	ap = alloc_apertures(1);
-	if (!ap)
-		return -ENOMEM;
-
-	ap->ranges[0].base = ggtt->mappable_base;
-	ap->ranges[0].size = ggtt->mappable_end;
-
-	primary =
-		pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
-
-	ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
-
-	kfree(ap);
-
-	return ret;
-}
-#else
-static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
-{
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_VGA_CONSOLE)
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
-	return 0;
-}
-#elif !defined(CONFIG_DUMMY_CONSOLE)
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
-	return -ENODEV;
-}
-#else
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
-	int ret = 0;
-
-	DRM_INFO("Replacing VGA console driver\n");
-
-	console_lock();
-	if (con_is_bound(&vga_con))
-		ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
-	if (ret == 0) {
-		ret = do_unregister_con_driver(&vga_con);
-
-		/* Ignore "already unregistered". */
-		if (ret == -ENODEV)
-			ret = 0;
-	}
-	console_unlock();
-
-	return ret;
-}
-#endif
-
-static void i915_dump_device_info(struct drm_i915_private *dev_priv)
-{
-	const struct intel_device_info *info = &dev_priv->info;
-
-#define PRINT_S(name) "%s"
-#define SEP_EMPTY
-#define PRINT_FLAG(name) info->name ? #name "," : ""
-#define SEP_COMMA ,
-	DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
-			 DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
-			 info->gen,
-			 dev_priv->dev->pdev->device,
-			 dev_priv->dev->pdev->revision,
-			 DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
-#undef PRINT_S
-#undef SEP_EMPTY
-#undef PRINT_FLAG
-#undef SEP_COMMA
-}
-
-static void cherryview_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	u32 fuse, eu_dis;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	fuse = I915_READ(CHV_FUSE_GT);
-
-	info->slice_total = 1;
-
-	if (!(fuse & CHV_FGT_DISABLE_SS0)) {
-		info->subslice_per_slice++;
-		eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
-				 CHV_FGT_EU_DIS_SS0_R1_MASK);
-		info->eu_total += 8 - hweight32(eu_dis);
-	}
-
-	if (!(fuse & CHV_FGT_DISABLE_SS1)) {
-		info->subslice_per_slice++;
-		eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
-				 CHV_FGT_EU_DIS_SS1_R1_MASK);
-		info->eu_total += 8 - hweight32(eu_dis);
-	}
-
-	info->subslice_total = info->subslice_per_slice;
-	/*
-	 * CHV expected to always have a uniform distribution of EU
-	 * across subslices.
-	*/
-	info->eu_per_subslice = info->subslice_total ?
-				info->eu_total / info->subslice_total :
-				0;
-	/*
-	 * CHV supports subslice power gating on devices with more than
-	 * one subslice, and supports EU power gating on devices with
-	 * more than one EU pair per subslice.
-	*/
-	info->has_slice_pg = 0;
-	info->has_subslice_pg = (info->subslice_total > 1);
-	info->has_eu_pg = (info->eu_per_subslice > 2);
-}
-
-static void gen9_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	int s_max = 3, ss_max = 4, eu_max = 8;
-	int s, ss;
-	u32 fuse2, s_enable, ss_disable, eu_disable;
-	u8 eu_mask = 0xff;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	fuse2 = I915_READ(GEN8_FUSE2);
-	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
-		   GEN8_F2_S_ENA_SHIFT;
-	ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
-		     GEN9_F2_SS_DIS_SHIFT;
-
-	info->slice_total = hweight32(s_enable);
-	/*
-	 * The subslice disable field is global, i.e. it applies
-	 * to each of the enabled slices.
-	*/
-	info->subslice_per_slice = ss_max - hweight32(ss_disable);
-	info->subslice_total = info->slice_total *
-			       info->subslice_per_slice;
-
-	/*
-	 * Iterate through enabled slices and subslices to
-	 * count the total enabled EU.
-	*/
-	for (s = 0; s < s_max; s++) {
-		if (!(s_enable & (0x1 << s)))
-			/* skip disabled slice */
-			continue;
-
-		eu_disable = I915_READ(GEN9_EU_DISABLE(s));
-		for (ss = 0; ss < ss_max; ss++) {
-			int eu_per_ss;
-
-			if (ss_disable & (0x1 << ss))
-				/* skip disabled subslice */
-				continue;
-
-			eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
-						      eu_mask);
-
-			/*
-			 * Record which subslice(s) has(have) 7 EUs. we
-			 * can tune the hash used to spread work among
-			 * subslices if they are unbalanced.
-			 */
-			if (eu_per_ss == 7)
-				info->subslice_7eu[s] |= 1 << ss;
-
-			info->eu_total += eu_per_ss;
-		}
-	}
-
-	/*
-	 * SKL is expected to always have a uniform distribution
-	 * of EU across subslices with the exception that any one
-	 * EU in any one subslice may be fused off for die
-	 * recovery. BXT is expected to be perfectly uniform in EU
-	 * distribution.
-	*/
-	info->eu_per_subslice = info->subslice_total ?
-				DIV_ROUND_UP(info->eu_total,
-					     info->subslice_total) : 0;
-	/*
-	 * SKL supports slice power gating on devices with more than
-	 * one slice, and supports EU power gating on devices with
-	 * more than one EU pair per subslice. BXT supports subslice
-	 * power gating on devices with more than one subslice, and
-	 * supports EU power gating on devices with more than one EU
-	 * pair per subslice.
-	*/
-	info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
-			       (info->slice_total > 1));
-	info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
-	info->has_eu_pg = (info->eu_per_subslice > 2);
-
-	if (IS_BROXTON(dev)) {
-#define IS_SS_DISABLED(_ss_disable, ss)    (_ss_disable & (0x1 << ss))
-		/*
-		 * There is a HW issue in 2x6 fused down parts that requires
-		 * Pooled EU to be enabled as a WA. The pool configuration
-		 * changes depending upon which subslice is fused down. This
-		 * doesn't affect if the device has all 3 subslices enabled.
-		 */
-		/* WaEnablePooledEuFor2x6:bxt */
-		info->has_pooled_eu = ((info->subslice_per_slice == 3) ||
-				       (info->subslice_per_slice == 2 &&
-					INTEL_REVID(dev) < BXT_REVID_C0));
-
-		info->min_eu_in_pool = 0;
-		if (info->has_pooled_eu) {
-			if (IS_SS_DISABLED(ss_disable, 0) ||
-			    IS_SS_DISABLED(ss_disable, 2))
-				info->min_eu_in_pool = 3;
-			else if (IS_SS_DISABLED(ss_disable, 1))
-				info->min_eu_in_pool = 6;
-			else
-				info->min_eu_in_pool = 9;
-		}
-#undef IS_SS_DISABLED
-	}
-}
-
-static void broadwell_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	const int s_max = 3, ss_max = 3, eu_max = 8;
-	int s, ss;
-	u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
-
-	fuse2 = I915_READ(GEN8_FUSE2);
-	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
-	ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
-
-	eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
-	eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
-			((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
-			 (32 - GEN8_EU_DIS0_S1_SHIFT));
-	eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
-			((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
-			 (32 - GEN8_EU_DIS1_S2_SHIFT));
-
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	info->slice_total = hweight32(s_enable);
-
-	/*
-	 * The subslice disable field is global, i.e. it applies
-	 * to each of the enabled slices.
-	 */
-	info->subslice_per_slice = ss_max - hweight32(ss_disable);
-	info->subslice_total = info->slice_total * info->subslice_per_slice;
-
-	/*
-	 * Iterate through enabled slices and subslices to
-	 * count the total enabled EU.
-	 */
-	for (s = 0; s < s_max; s++) {
-		if (!(s_enable & (0x1 << s)))
-			/* skip disabled slice */
-			continue;
-
-		for (ss = 0; ss < ss_max; ss++) {
-			u32 n_disabled;
-
-			if (ss_disable & (0x1 << ss))
-				/* skip disabled subslice */
-				continue;
-
-			n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
-
-			/*
-			 * Record which subslices have 7 EUs.
-			 */
-			if (eu_max - n_disabled == 7)
-				info->subslice_7eu[s] |= 1 << ss;
-
-			info->eu_total += eu_max - n_disabled;
-		}
-	}
-
-	/*
-	 * BDW is expected to always have a uniform distribution of EU across
-	 * subslices with the exception that any one EU in any one subslice may
-	 * be fused off for die recovery.
-	 */
-	info->eu_per_subslice = info->subslice_total ?
-		DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
-
-	/*
-	 * BDW supports slice power gating on devices with more than
-	 * one slice.
-	 */
-	info->has_slice_pg = (info->slice_total > 1);
-	info->has_subslice_pg = 0;
-	info->has_eu_pg = 0;
-}
-
-/*
- * Determine various intel_device_info fields at runtime.
- *
- * Use it when either:
- *   - it's judged too laborious to fill n static structures with the limit
- *     when a simple if statement does the job,
- *   - run-time checks (eg read fuse/strap registers) are needed.
- *
- * This function needs to be called:
- *   - after the MMIO has been setup as we are reading registers,
- *   - after the PCH has been detected,
- *   - before the first usage of the fields it can tweak.
- */
-static void intel_device_info_runtime_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	enum pipe pipe;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-
-	/*
-	 * Skylake and Broxton currently don't expose the topmost plane as its
-	 * use is exclusive with the legacy cursor and we only want to expose
-	 * one of those, not both. Until we can safely expose the topmost plane
-	 * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
-	 * we don't expose the topmost plane at all to prevent ABI breakage
-	 * down the line.
-	 */
-	if (IS_BROXTON(dev)) {
-		info->num_sprites[PIPE_A] = 2;
-		info->num_sprites[PIPE_B] = 2;
-		info->num_sprites[PIPE_C] = 1;
-	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
-		for_each_pipe(dev_priv, pipe)
-			info->num_sprites[pipe] = 2;
-	else
-		for_each_pipe(dev_priv, pipe)
-			info->num_sprites[pipe] = 1;
-
-	if (i915.disable_display) {
-		DRM_INFO("Display disabled (module parameter)\n");
-		info->num_pipes = 0;
-	} else if (info->num_pipes > 0 &&
-		   (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
-		   HAS_PCH_SPLIT(dev)) {
-		u32 fuse_strap = I915_READ(FUSE_STRAP);
-		u32 sfuse_strap = I915_READ(SFUSE_STRAP);
-
-		/*
-		 * SFUSE_STRAP is supposed to have a bit signalling the display
-		 * is fused off. Unfortunately it seems that, at least in
-		 * certain cases, fused off display means that PCH display
-		 * reads don't land anywhere. In that case, we read 0s.
-		 *
-		 * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
-		 * should be set when taking over after the firmware.
-		 */
-		if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
-		    sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
-		    (dev_priv->pch_type == PCH_CPT &&
-		     !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
-			DRM_INFO("Display fused off, disabling\n");
-			info->num_pipes = 0;
-		} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
-			DRM_INFO("PipeC fused off\n");
-			info->num_pipes -= 1;
-		}
-	} else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
-		u32 dfsm = I915_READ(SKL_DFSM);
-		u8 disabled_mask = 0;
-		bool invalid;
-		int num_bits;
-
-		if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
-			disabled_mask |= BIT(PIPE_A);
-		if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
-			disabled_mask |= BIT(PIPE_B);
-		if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
-			disabled_mask |= BIT(PIPE_C);
-
-		num_bits = hweight8(disabled_mask);
-
-		switch (disabled_mask) {
-		case BIT(PIPE_A):
-		case BIT(PIPE_B):
-		case BIT(PIPE_A) | BIT(PIPE_B):
-		case BIT(PIPE_A) | BIT(PIPE_C):
-			invalid = true;
-			break;
-		default:
-			invalid = false;
-		}
-
-		if (num_bits > info->num_pipes || invalid)
-			DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
-				  disabled_mask);
-		else
-			info->num_pipes -= num_bits;
-	}
-
-	/* Initialize slice/subslice/EU info */
-	if (IS_CHERRYVIEW(dev))
-		cherryview_sseu_info_init(dev);
-	else if (IS_BROADWELL(dev))
-		broadwell_sseu_info_init(dev);
-	else if (INTEL_INFO(dev)->gen >= 9)
-		gen9_sseu_info_init(dev);
-
-	info->has_snoop = !info->has_llc;
-
-	/* Snooping is broken on BXT A stepping. */
-	if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
-		info->has_snoop = false;
-
-	DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
-	DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
-	DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
-	DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
-	DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
-	DRM_DEBUG_DRIVER("Has Pooled EU: %s\n", HAS_POOLED_EU(dev) ? "y" : "n");
-	if (HAS_POOLED_EU(dev))
-		DRM_DEBUG_DRIVER("Min EU in pool: %u\n", info->min_eu_in_pool);
-	DRM_DEBUG_DRIVER("has slice power gating: %s\n",
-			 info->has_slice_pg ? "y" : "n");
-	DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
-			 info->has_subslice_pg ? "y" : "n");
-	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
-			 info->has_eu_pg ? "y" : "n");
-
-	i915.enable_execlists =
-		intel_sanitize_enable_execlists(dev_priv,
-					       	i915.enable_execlists);
-
-	/*
-	 * i915.enable_ppgtt is read-only, so do an early pass to validate the
-	 * user's requested state against the hardware/driver capabilities.  We
-	 * do this now so that we can print out any log messages once rather
-	 * than every time we check intel_enable_ppgtt().
-	 */
-	i915.enable_ppgtt =
-		intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
-	DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
-}
-
-static void intel_init_dpio(struct drm_i915_private *dev_priv)
-{
-	/*
-	 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
-	 * CHV x1 PHY (DP/HDMI D)
-	 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
-	 */
-	if (IS_CHERRYVIEW(dev_priv)) {
-		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
-		DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
-	} else if (IS_VALLEYVIEW(dev_priv)) {
-		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
-	}
-}
-
-static int i915_workqueues_init(struct drm_i915_private *dev_priv)
-{
-	/*
-	 * The i915 workqueue is primarily used for batched retirement of
-	 * requests (and thus managing bo) once the task has been completed
-	 * by the GPU. i915_gem_retire_requests() is called directly when we
-	 * need high-priority retirement, such as waiting for an explicit
-	 * bo.
-	 *
-	 * It is also used for periodic low-priority events, such as
-	 * idle-timers and recording error state.
-	 *
-	 * All tasks on the workqueue are expected to acquire the dev mutex
-	 * so there is no point in running more than one instance of the
-	 * workqueue at any time.  Use an ordered one.
-	 */
-	dev_priv->wq = alloc_ordered_workqueue("i915", 0);
-	if (dev_priv->wq == NULL)
-		goto out_err;
-
-	dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
-	if (dev_priv->hotplug.dp_wq == NULL)
-		goto out_free_wq;
-
-	dev_priv->gpu_error.hangcheck_wq =
-		alloc_ordered_workqueue("i915-hangcheck", 0);
-	if (dev_priv->gpu_error.hangcheck_wq == NULL)
-		goto out_free_dp_wq;
-
-	return 0;
-
-out_free_dp_wq:
-	destroy_workqueue(dev_priv->hotplug.dp_wq);
-out_free_wq:
-	destroy_workqueue(dev_priv->wq);
-out_err:
-	DRM_ERROR("Failed to allocate workqueues.\n");
-
-	return -ENOMEM;
-}
-
-static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
-{
-	destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
-	destroy_workqueue(dev_priv->hotplug.dp_wq);
-	destroy_workqueue(dev_priv->wq);
-}
-
-/**
- * i915_driver_init_early - setup state not requiring device access
- * @dev_priv: device private
- *
- * Initialize everything that is a "SW-only" state, that is state not
- * requiring accessing the device or exposing the driver via kernel internal
- * or userspace interfaces. Example steps belonging here: lock initialization,
- * system memory allocation, setting up device specific attributes and
- * function hooks not requiring accessing the device.
- */
-static int i915_driver_init_early(struct drm_i915_private *dev_priv,
-				  const struct pci_device_id *ent)
-{
-	const struct intel_device_info *match_info =
-		(struct intel_device_info *)ent->driver_data;
-	struct intel_device_info *device_info;
-	int ret = 0;
-
-	if (i915_inject_load_failure())
-		return -ENODEV;
-
-	/* Setup the write-once "constant" device info */
-	device_info = (struct intel_device_info *)&dev_priv->info;
-	memcpy(device_info, match_info, sizeof(*device_info));
-	device_info->device_id = dev_priv->drm.pdev->device;
-
-	BUG_ON(device_info->gen > sizeof(device_info->gen_mask) * BITS_PER_BYTE);
-	device_info->gen_mask = BIT(device_info->gen - 1);
-
-	spin_lock_init(&dev_priv->irq_lock);
-	spin_lock_init(&dev_priv->gpu_error.lock);
-	mutex_init(&dev_priv->backlight_lock);
-	spin_lock_init(&dev_priv->uncore.lock);
-	spin_lock_init(&dev_priv->mm.object_stat_lock);
-	spin_lock_init(&dev_priv->mmio_flip_lock);
-	mutex_init(&dev_priv->sb_lock);
-	mutex_init(&dev_priv->modeset_restore_lock);
-	mutex_init(&dev_priv->av_mutex);
-	mutex_init(&dev_priv->wm.wm_mutex);
-	mutex_init(&dev_priv->pps_mutex);
-
-	ret = i915_workqueues_init(dev_priv);
-	if (ret < 0)
-		return ret;
-
-	ret = intel_gvt_init(dev_priv);
-	if (ret < 0)
-		goto err_workqueues;
-
-	/* This must be called before any calls to HAS_PCH_* */
-	intel_detect_pch(&dev_priv->drm);
-
-	intel_pm_setup(&dev_priv->drm);
-	intel_init_dpio(dev_priv);
-	intel_power_domains_init(dev_priv);
-	intel_irq_init(dev_priv);
-	intel_init_display_hooks(dev_priv);
-	intel_init_clock_gating_hooks(dev_priv);
-	intel_init_audio_hooks(dev_priv);
-	i915_gem_load_init(&dev_priv->drm);
-
-	intel_display_crc_init(&dev_priv->drm);
-
-	i915_dump_device_info(dev_priv);
-
-	/* Not all pre-production machines fall into this category, only the
-	 * very first ones. Almost everything should work, except for maybe
-	 * suspend/resume. And we don't implement workarounds that affect only
-	 * pre-production machines. */
-	if (IS_HSW_EARLY_SDV(dev_priv))
-		DRM_INFO("This is an early pre-production Haswell machine. "
-			 "It may not be fully functional.\n");
-
-	return 0;
-
-err_workqueues:
-	i915_workqueues_cleanup(dev_priv);
-	return ret;
-}
-
-/**
- * i915_driver_cleanup_early - cleanup the setup done in i915_driver_init_early()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv)
-{
-	i915_gem_load_cleanup(dev_priv->dev);
-	i915_workqueues_cleanup(dev_priv);
-}
-
-static int i915_mmio_setup(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	int mmio_bar;
-	int mmio_size;
-
-	mmio_bar = IS_GEN2(dev) ? 1 : 0;
-	/*
-	 * Before gen4, the registers and the GTT are behind different BARs.
-	 * However, from gen4 onwards, the registers and the GTT are shared
-	 * in the same BAR, so we want to restrict this ioremap from
-	 * clobbering the GTT which we want ioremap_wc instead. Fortunately,
-	 * the register BAR remains the same size for all the earlier
-	 * generations up to Ironlake.
-	 */
-	if (INTEL_INFO(dev)->gen < 5)
-		mmio_size = 512 * 1024;
-	else
-		mmio_size = 2 * 1024 * 1024;
-	dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
-	if (dev_priv->regs == NULL) {
-		DRM_ERROR("failed to map registers\n");
-
-		return -EIO;
-	}
-
-	/* Try to make sure MCHBAR is enabled before poking at it */
-	intel_setup_mchbar(dev);
-
-	return 0;
-}
-
-static void i915_mmio_cleanup(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-
-	intel_teardown_mchbar(dev);
-	pci_iounmap(dev->pdev, dev_priv->regs);
-}
-
-/**
- * i915_driver_init_mmio - setup device MMIO
- * @dev_priv: device private
- *
- * Setup minimal device state necessary for MMIO accesses later in the
- * initialization sequence. The setup here should avoid any other device-wide
- * side effects or exposing the driver via kernel internal or user space
- * interfaces.
- */
-static int i915_driver_init_mmio(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	int ret;
-
-	if (i915_inject_load_failure())
-		return -ENODEV;
-
-	if (i915_get_bridge_dev(dev))
-		return -EIO;
-
-	ret = i915_mmio_setup(dev);
-	if (ret < 0)
-		goto put_bridge;
-
-	intel_uncore_init(dev_priv);
-
-	return 0;
-
-put_bridge:
-	pci_dev_put(dev_priv->bridge_dev);
-
-	return ret;
-}
-
-/**
- * i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-
-	intel_uncore_fini(dev_priv);
-	i915_mmio_cleanup(dev);
-	pci_dev_put(dev_priv->bridge_dev);
-}
-
-/**
- * i915_driver_init_hw - setup state requiring device access
- * @dev_priv: device private
- *
- * Setup state that requires accessing the device, but doesn't require
- * exposing the driver via kernel internal or userspace interfaces.
- */
-static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct i915_ggtt *ggtt = &dev_priv->ggtt;
-	uint32_t aperture_size;
-	int ret;
-
-	if (i915_inject_load_failure())
-		return -ENODEV;
-
-	intel_device_info_runtime_init(dev);
-
-	ret = i915_ggtt_init_hw(dev);
-	if (ret)
-		return ret;
-
-	ret = i915_ggtt_enable_hw(dev);
-	if (ret) {
-		DRM_ERROR("failed to enable GGTT\n");
-		goto out_ggtt;
-	}
-
-	/* WARNING: Apparently we must kick fbdev drivers before vgacon,
-	 * otherwise the vga fbdev driver falls over. */
-	ret = i915_kick_out_firmware_fb(dev_priv);
-	if (ret) {
-		DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
-		goto out_ggtt;
-	}
-
-	ret = i915_kick_out_vgacon(dev_priv);
-	if (ret) {
-		DRM_ERROR("failed to remove conflicting VGA console\n");
-		goto out_ggtt;
-	}
-
-	pci_set_master(dev->pdev);
-
-	/* overlay on gen2 is broken and can't address above 1G */
-	if (IS_GEN2(dev)) {
-		ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
-		if (ret) {
-			DRM_ERROR("failed to set DMA mask\n");
-
-			goto out_ggtt;
-		}
-	}
-
-
-	/* 965GM sometimes incorrectly writes to hardware status page (HWS)
-	 * using 32bit addressing, overwriting memory if HWS is located
-	 * above 4GB.
-	 *
-	 * The documentation also mentions an issue with undefined
-	 * behaviour if any general state is accessed within a page above 4GB,
-	 * which also needs to be handled carefully.
-	 */
-	if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) {
-		ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
-
-		if (ret) {
-			DRM_ERROR("failed to set DMA mask\n");
-
-			goto out_ggtt;
-		}
-	}
-
-	aperture_size = ggtt->mappable_end;
-
-	ggtt->mappable =
-		io_mapping_create_wc(ggtt->mappable_base,
-				     aperture_size);
-	if (!ggtt->mappable) {
-		ret = -EIO;
-		goto out_ggtt;
-	}
-
-	ggtt->mtrr = arch_phys_wc_add(ggtt->mappable_base,
-					      aperture_size);
-
-	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY,
-			   PM_QOS_DEFAULT_VALUE);
-
-	intel_uncore_sanitize(dev_priv);
-
-	intel_opregion_setup(dev_priv);
-
-	i915_gem_load_init_fences(dev_priv);
-
-	/* On the 945G/GM, the chipset reports the MSI capability on the
-	 * integrated graphics even though the support isn't actually there
-	 * according to the published specs.  It doesn't appear to function
-	 * correctly in testing on 945G.
-	 * This may be a side effect of MSI having been made available for PEG
-	 * and the registers being closely associated.
-	 *
-	 * According to chipset errata, on the 965GM, MSI interrupts may
-	 * be lost or delayed, but we use them anyways to avoid
-	 * stuck interrupts on some machines.
-	 */
-	if (!IS_I945G(dev) && !IS_I945GM(dev)) {
-		if (pci_enable_msi(dev->pdev) < 0)
-			DRM_DEBUG_DRIVER("can't enable MSI");
-	}
-
-	return 0;
-
-out_ggtt:
-	i915_ggtt_cleanup_hw(dev);
-
-	return ret;
-}
-
-/**
- * i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct i915_ggtt *ggtt = &dev_priv->ggtt;
-
-	if (dev->pdev->msi_enabled)
-		pci_disable_msi(dev->pdev);
-
-	pm_qos_remove_request(&dev_priv->pm_qos);
-	arch_phys_wc_del(ggtt->mtrr);
-	io_mapping_free(ggtt->mappable);
-	i915_ggtt_cleanup_hw(dev);
-}
-
-/**
- * i915_driver_register - register the driver with the rest of the system
- * @dev_priv: device private
- *
- * Perform any steps necessary to make the driver available via kernel
- * internal or userspace interfaces.
- */
-static void i915_driver_register(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-
-	i915_gem_shrinker_init(dev_priv);
-
-	/*
-	 * Notify a valid surface after modesetting,
-	 * when running inside a VM.
-	 */
-	if (intel_vgpu_active(dev_priv))
-		I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
-
-	/* Reveal our presence to userspace */
-	if (drm_dev_register(dev, 0) == 0) {
-		i915_debugfs_register(dev_priv);
-		i915_setup_sysfs(dev);
-	} else
-		DRM_ERROR("Failed to register driver for userspace access!\n");
-
-	if (INTEL_INFO(dev_priv)->num_pipes) {
-		/* Must be done after probing outputs */
-		intel_opregion_register(dev_priv);
-		acpi_video_register();
-	}
-
-	if (IS_GEN5(dev_priv))
-		intel_gpu_ips_init(dev_priv);
-
-	i915_audio_component_init(dev_priv);
-
-	/*
-	 * Some ports require correctly set-up hpd registers for detection to
-	 * work properly (leading to ghost connected connector status), e.g. VGA
-	 * on gm45.  Hence we can only set up the initial fbdev config after hpd
-	 * irqs are fully enabled. We do it last so that the async config
-	 * cannot run before the connectors are registered.
-	 */
-	intel_fbdev_initial_config_async(dev);
-}
-
-/**
- * i915_driver_unregister - cleanup the registration done in i915_driver_regiser()
- * @dev_priv: device private
- */
-static void i915_driver_unregister(struct drm_i915_private *dev_priv)
-{
-	i915_audio_component_cleanup(dev_priv);
-
-	intel_gpu_ips_teardown();
-	acpi_video_unregister();
-	intel_opregion_unregister(dev_priv);
-
-	i915_teardown_sysfs(dev_priv->dev);
-	i915_debugfs_unregister(dev_priv);
-	drm_dev_unregister(dev_priv->dev);
-
-	i915_gem_shrinker_cleanup(dev_priv);
-}
-
-/**
- * i915_driver_load - setup chip and create an initial config
- * @dev: DRM device
- * @flags: startup flags
- *
- * The driver load routine has to do several things:
- *   - drive output discovery via intel_modeset_init()
- *   - initialize the memory manager
- *   - allocate initial config memory
- *   - setup the DRM framebuffer with the allocated memory
- */
-int i915_driver_load(struct pci_dev *pdev,
-		     const struct pci_device_id *ent,
-		     struct drm_driver *driver)
-{
-	struct drm_i915_private *dev_priv;
-	int ret;
-
-	ret = -ENOMEM;
-	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
-	if (dev_priv)
-		ret = drm_dev_init(&dev_priv->drm, driver, &pdev->dev);
-	if (ret) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "[" DRM_NAME ":%s] allocation failed\n", __func__);
-		kfree(dev_priv);
-		return ret;
-	}
-
-	/* Must be set before calling __i915_printk */
-	dev_priv->drm.pdev = pdev;
-	dev_priv->drm.dev_private = dev_priv;
-	dev_priv->dev = &dev_priv->drm;
-
-	ret = pci_enable_device(pdev);
-	if (ret)
-		goto out_free_priv;
-
-	pci_set_drvdata(pdev, &dev_priv->drm);
-
-	ret = i915_driver_init_early(dev_priv, ent);
-	if (ret < 0)
-		goto out_pci_disable;
-
-	intel_runtime_pm_get(dev_priv);
-
-	ret = i915_driver_init_mmio(dev_priv);
-	if (ret < 0)
-		goto out_runtime_pm_put;
-
-	ret = i915_driver_init_hw(dev_priv);
-	if (ret < 0)
-		goto out_cleanup_mmio;
-
-	/*
-	 * TODO: move the vblank init and parts of modeset init steps into one
-	 * of the i915_driver_init_/i915_driver_register functions according
-	 * to the role/effect of the given init step.
-	 */
-	if (INTEL_INFO(dev_priv)->num_pipes) {
-		ret = drm_vblank_init(dev_priv->dev,
-				      INTEL_INFO(dev_priv)->num_pipes);
-		if (ret)
-			goto out_cleanup_hw;
-	}
-
-	ret = i915_load_modeset_init(dev_priv->dev);
-	if (ret < 0)
-		goto out_cleanup_vblank;
-
-	i915_driver_register(dev_priv);
-
-	intel_runtime_pm_enable(dev_priv);
-
-	intel_runtime_pm_put(dev_priv);
-
-	return 0;
-
-out_cleanup_vblank:
-	drm_vblank_cleanup(dev_priv->dev);
-out_cleanup_hw:
-	i915_driver_cleanup_hw(dev_priv);
-out_cleanup_mmio:
-	i915_driver_cleanup_mmio(dev_priv);
-out_runtime_pm_put:
-	intel_runtime_pm_put(dev_priv);
-	i915_driver_cleanup_early(dev_priv);
-out_pci_disable:
-	pci_disable_device(pdev);
-out_free_priv:
-	i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
-	drm_dev_unref(&dev_priv->drm);
-	return ret;
-}
-
-int i915_driver_unload(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret;
-
-	intel_fbdev_fini(dev);
-
-	intel_gvt_cleanup(dev_priv);
-
-	ret = i915_gem_suspend(dev);
-	if (ret) {
-		DRM_ERROR("failed to idle hardware: %d\n", ret);
-		return ret;
-	}
-
-	intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
-
-	i915_driver_unregister(dev_priv);
-
-	drm_vblank_cleanup(dev);
-
-	intel_modeset_cleanup(dev);
-
-	/*
-	 * free the memory space allocated for the child device
-	 * config parsed from VBT
-	 */
-	if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
-		kfree(dev_priv->vbt.child_dev);
-		dev_priv->vbt.child_dev = NULL;
-		dev_priv->vbt.child_dev_num = 0;
-	}
-	kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
-	dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
-	kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
-	dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
-
-	vga_switcheroo_unregister_client(dev->pdev);
-	vga_client_register(dev->pdev, NULL, NULL, NULL);
-
-	intel_csr_ucode_fini(dev_priv);
-
-	/* Free error state after interrupts are fully disabled. */
-	cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
-	i915_destroy_error_state(dev);
-
-	/* Flush any outstanding unpin_work. */
-	flush_workqueue(dev_priv->wq);
-
-	intel_guc_fini(dev);
-	i915_gem_fini(dev);
-	intel_fbc_cleanup_cfb(dev_priv);
-
-	intel_power_domains_fini(dev_priv);
-
-	i915_driver_cleanup_hw(dev_priv);
-	i915_driver_cleanup_mmio(dev_priv);
-
-	intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
-
-	i915_driver_cleanup_early(dev_priv);
-
-	return 0;
-}
-
-int i915_driver_open(struct drm_device *dev, struct drm_file *file)
-{
-	int ret;
-
-	ret = i915_gem_open(dev, file);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-/**
- * i915_driver_lastclose - clean up after all DRM clients have exited
- * @dev: DRM device
- *
- * Take care of cleaning up after all DRM clients have exited.  In the
- * mode setting case, we want to restore the kernel's initial mode (just
- * in case the last client left us in a bad state).
- *
- * Additionally, in the non-mode setting case, we'll tear down the GTT
- * and DMA structures, since the kernel won't be using them, and clea
- * up any GEM state.
- */
-void i915_driver_lastclose(struct drm_device *dev)
-{
-	intel_fbdev_restore_mode(dev);
-	vga_switcheroo_process_delayed_switch();
-}
-
-void i915_driver_preclose(struct drm_device *dev, struct drm_file *file)
-{
-	mutex_lock(&dev->struct_mutex);
-	i915_gem_context_close(dev, file);
-	i915_gem_release(dev, file);
-	mutex_unlock(&dev->struct_mutex);
-}
-
-void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
-{
-	struct drm_i915_file_private *file_priv = file->driver_priv;
-
-	kfree(file_priv);
-}
-
-static int
-i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
-			  struct drm_file *file)
-{
-	return -ENODEV;
-}
-
-const struct drm_ioctl_desc i915_ioctls[] = {
-	DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE,  drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
-	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
-	DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW),
-	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW),
-};
-
-int i915_max_ioctl = ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 9ddae6add9e0..e2375361a34d 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -27,19 +27,29 @@
  *
  */
 
-#include <linux/device.h>
 #include <linux/acpi.h>
-#include <drm/drmP.h>
-#include <drm/i915_drm.h>
-#include "i915_drv.h"
-#include "i915_trace.h"
-#include "intel_drv.h"
-
 #include <linux/console.h>
+#include <linux/device.h>
+#include <linux/oom.h>
 #include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/pnp.h>
+#include <linux/slab.h>
+#include <linux/vgaarb.h>
 #include <linux/vga_switcheroo.h>
+#include <linux/vt.h>
+#include <acpi/video.h>
+
+#include <drm/drmP.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/i915_drm.h>
+
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "i915_vgpu.h"
+#include "intel_drv.h"
 
 static struct drm_driver driver;
 
@@ -321,239 +331,1833 @@ static const struct intel_device_info intel_broadwell_gt3m_info = {
 	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
 };
 
-static const struct intel_device_info intel_cherryview_info = {
-	.gen = 8, .num_pipes = 3,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
-	.is_cherryview = 1,
-	.display_mmio_offset = VLV_DISPLAY_BASE,
-	GEN_CHV_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-	CHV_COLORS,
-};
+static const struct intel_device_info intel_cherryview_info = {
+	.gen = 8, .num_pipes = 3,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.is_cherryview = 1,
+	.display_mmio_offset = VLV_DISPLAY_BASE,
+	GEN_CHV_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+	CHV_COLORS,
+};
+
+static const struct intel_device_info intel_skylake_info = {
+	BDW_FEATURES,
+	.is_skylake = 1,
+	.gen = 9,
+};
+
+static const struct intel_device_info intel_skylake_gt3_info = {
+	BDW_FEATURES,
+	.is_skylake = 1,
+	.gen = 9,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+static const struct intel_device_info intel_broxton_info = {
+	.is_preliminary = 1,
+	.is_broxton = 1,
+	.gen = 9,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.num_pipes = 3,
+	.has_ddi = 1,
+	.has_fpga_dbg = 1,
+	.has_fbc = 1,
+	.has_pooled_eu = 0,
+	GEN_DEFAULT_PIPEOFFSETS,
+	IVB_CURSOR_OFFSETS,
+	BDW_COLORS,
+};
+
+static const struct intel_device_info intel_kabylake_info = {
+	BDW_FEATURES,
+	.is_kabylake = 1,
+	.gen = 9,
+};
+
+static const struct intel_device_info intel_kabylake_gt3_info = {
+	BDW_FEATURES,
+	.is_kabylake = 1,
+	.gen = 9,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+/*
+ * Make sure any device matches here are from most specific to most
+ * general.  For example, since the Quanta match is based on the subsystem
+ * and subvendor IDs, we need it to come before the more general IVB
+ * PCI ID matches, otherwise we'll use the wrong info struct above.
+ */
+static const struct pci_device_id pciidlist[] = {
+	INTEL_I830_IDS(&intel_i830_info),
+	INTEL_I845G_IDS(&intel_845g_info),
+	INTEL_I85X_IDS(&intel_i85x_info),
+	INTEL_I865G_IDS(&intel_i865g_info),
+	INTEL_I915G_IDS(&intel_i915g_info),
+	INTEL_I915GM_IDS(&intel_i915gm_info),
+	INTEL_I945G_IDS(&intel_i945g_info),
+	INTEL_I945GM_IDS(&intel_i945gm_info),
+	INTEL_I965G_IDS(&intel_i965g_info),
+	INTEL_G33_IDS(&intel_g33_info),
+	INTEL_I965GM_IDS(&intel_i965gm_info),
+	INTEL_GM45_IDS(&intel_gm45_info),
+	INTEL_G45_IDS(&intel_g45_info),
+	INTEL_PINEVIEW_IDS(&intel_pineview_info),
+	INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
+	INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
+	INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
+	INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
+	INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
+	INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
+	INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
+	INTEL_HSW_D_IDS(&intel_haswell_d_info),
+	INTEL_HSW_M_IDS(&intel_haswell_m_info),
+	INTEL_VLV_M_IDS(&intel_valleyview_m_info),
+	INTEL_VLV_D_IDS(&intel_valleyview_d_info),
+	INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),
+	INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),
+	INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),
+	INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info),
+	INTEL_CHV_IDS(&intel_cherryview_info),
+	INTEL_SKL_GT1_IDS(&intel_skylake_info),
+	INTEL_SKL_GT2_IDS(&intel_skylake_info),
+	INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
+	INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
+	INTEL_BXT_IDS(&intel_broxton_info),
+	INTEL_KBL_GT1_IDS(&intel_kabylake_info),
+	INTEL_KBL_GT2_IDS(&intel_kabylake_info),
+	INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
+	INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
+	{0, 0, 0}
+};
+MODULE_DEVICE_TABLE(pci, pciidlist);
+
+static unsigned int i915_load_fail_count;
+
+bool __i915_inject_load_failure(const char *func, int line)
+{
+	if (i915_load_fail_count >= i915.inject_load_failure)
+		return false;
+
+	if (++i915_load_fail_count == i915.inject_load_failure) {
+		DRM_INFO("Injecting failure at checkpoint %u [%s:%d]\n",
+			 i915.inject_load_failure, func, line);
+		return true;
+	}
+
+	return false;
+}
+
+#define FDO_BUG_URL "https://bugs.freedesktop.org/enter_bug.cgi?product=DRI"
+#define FDO_BUG_MSG "Please file a bug at " FDO_BUG_URL " against DRM/Intel " \
+		    "providing the dmesg log by booting with drm.debug=0xf"
+
+void
+__i915_printk(struct drm_i915_private *dev_priv, const char *level,
+	      const char *fmt, ...)
+{
+	static bool shown_bug_once;
+	struct device *dev = dev_priv->dev->dev;
+	bool is_error = level[1] <= KERN_ERR[1];
+	bool is_debug = level[1] == KERN_DEBUG[1];
+	struct va_format vaf;
+	va_list args;
+
+	if (is_debug && !(drm_debug & DRM_UT_DRIVER))
+		return;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	dev_printk(level, dev, "[" DRM_NAME ":%ps] %pV",
+		   __builtin_return_address(0), &vaf);
+
+	if (is_error && !shown_bug_once) {
+		dev_notice(dev, "%s", FDO_BUG_MSG);
+		shown_bug_once = true;
+	}
+
+	va_end(args);
+}
+
+static bool i915_error_injected(struct drm_i915_private *dev_priv)
+{
+	return i915.inject_load_failure &&
+	       i915_load_fail_count == i915.inject_load_failure;
+}
+
+#define i915_load_error(dev_priv, fmt, ...)				     \
+	__i915_printk(dev_priv,						     \
+		      i915_error_injected(dev_priv) ? KERN_DEBUG : KERN_ERR, \
+		      fmt, ##__VA_ARGS__)
+
+
+static enum intel_pch intel_virt_detect_pch(struct drm_device *dev)
+{
+	enum intel_pch ret = PCH_NOP;
+
+	/*
+	 * In a virtualized passthrough environment we can be in a
+	 * setup where the ISA bridge is not able to be passed through.
+	 * In this case, a south bridge can be emulated and we have to
+	 * make an educated guess as to which PCH is really there.
+	 */
+
+	if (IS_GEN5(dev)) {
+		ret = PCH_IBX;
+		DRM_DEBUG_KMS("Assuming Ibex Peak PCH\n");
+	} else if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
+		ret = PCH_CPT;
+		DRM_DEBUG_KMS("Assuming CouarPoint PCH\n");
+	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+		ret = PCH_LPT;
+		DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
+	} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
+		ret = PCH_SPT;
+		DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
+	}
+
+	return ret;
+}
+
+static void intel_detect_pch(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct pci_dev *pch = NULL;
+
+	/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
+	 * (which really amounts to a PCH but no South Display).
+	 */
+	if (INTEL_INFO(dev)->num_pipes == 0) {
+		dev_priv->pch_type = PCH_NOP;
+		return;
+	}
+
+	/*
+	 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
+	 * make graphics device passthrough work easy for VMM, that only
+	 * need to expose ISA bridge to let driver know the real hardware
+	 * underneath. This is a requirement from virtualization team.
+	 *
+	 * In some virtualized environments (e.g. XEN), there is irrelevant
+	 * ISA bridge in the system. To work reliably, we should scan trhough
+	 * all the ISA bridge devices and check for the first match, instead
+	 * of only checking the first one.
+	 */
+	while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
+		if (pch->vendor == PCI_VENDOR_ID_INTEL) {
+			unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
+			dev_priv->pch_id = id;
+
+			if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_IBX;
+				DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
+				WARN_ON(!IS_GEN5(dev));
+			} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_CPT;
+				DRM_DEBUG_KMS("Found CougarPoint PCH\n");
+				WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
+			} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
+				/* PantherPoint is CPT compatible */
+				dev_priv->pch_type = PCH_CPT;
+				DRM_DEBUG_KMS("Found PantherPoint PCH\n");
+				WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
+			} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_LPT;
+				DRM_DEBUG_KMS("Found LynxPoint PCH\n");
+				WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
+				WARN_ON(IS_HSW_ULT(dev) || IS_BDW_ULT(dev));
+			} else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_LPT;
+				DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
+				WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
+				WARN_ON(!IS_HSW_ULT(dev) && !IS_BDW_ULT(dev));
+			} else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_SPT;
+				DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
+				WARN_ON(!IS_SKYLAKE(dev) &&
+					!IS_KABYLAKE(dev));
+			} else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_SPT;
+				DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
+				WARN_ON(!IS_SKYLAKE(dev) &&
+					!IS_KABYLAKE(dev));
+			} else if ((id == INTEL_PCH_P2X_DEVICE_ID_TYPE) ||
+				   (id == INTEL_PCH_P3X_DEVICE_ID_TYPE) ||
+				   ((id == INTEL_PCH_QEMU_DEVICE_ID_TYPE) &&
+				    pch->subsystem_vendor ==
+					    PCI_SUBVENDOR_ID_REDHAT_QUMRANET &&
+				    pch->subsystem_device ==
+					    PCI_SUBDEVICE_ID_QEMU)) {
+				dev_priv->pch_type = intel_virt_detect_pch(dev);
+			} else
+				continue;
+
+			break;
+		}
+	}
+	if (!pch)
+		DRM_DEBUG_KMS("No PCH found.\n");
+
+	pci_dev_put(pch);
+}
+
+bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv)
+{
+	if (INTEL_GEN(dev_priv) < 6)
+		return false;
+
+	if (i915.semaphores >= 0)
+		return i915.semaphores;
+
+	/* TODO: make semaphores and Execlists play nicely together */
+	if (i915.enable_execlists)
+		return false;
+
+#ifdef CONFIG_INTEL_IOMMU
+	/* Enable semaphores on SNB when IO remapping is off */
+	if (IS_GEN6(dev_priv) && intel_iommu_gfx_mapped)
+		return false;
+#endif
+
+	return true;
+}
+
+static int i915_getparam(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	drm_i915_getparam_t *param = data;
+	int value;
+
+	switch (param->param) {
+	case I915_PARAM_IRQ_ACTIVE:
+	case I915_PARAM_ALLOW_BATCHBUFFER:
+	case I915_PARAM_LAST_DISPATCH:
+		/* Reject all old ums/dri params. */
+		return -ENODEV;
+	case I915_PARAM_CHIPSET_ID:
+		value = dev->pdev->device;
+		break;
+	case I915_PARAM_REVISION:
+		value = dev->pdev->revision;
+		break;
+	case I915_PARAM_HAS_GEM:
+		value = 1;
+		break;
+	case I915_PARAM_NUM_FENCES_AVAIL:
+		value = dev_priv->num_fence_regs;
+		break;
+	case I915_PARAM_HAS_OVERLAY:
+		value = dev_priv->overlay ? 1 : 0;
+		break;
+	case I915_PARAM_HAS_PAGEFLIPPING:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXECBUF2:
+		/* depends on GEM */
+		value = 1;
+		break;
+	case I915_PARAM_HAS_BSD:
+		value = intel_engine_initialized(&dev_priv->engine[VCS]);
+		break;
+	case I915_PARAM_HAS_BLT:
+		value = intel_engine_initialized(&dev_priv->engine[BCS]);
+		break;
+	case I915_PARAM_HAS_VEBOX:
+		value = intel_engine_initialized(&dev_priv->engine[VECS]);
+		break;
+	case I915_PARAM_HAS_BSD2:
+		value = intel_engine_initialized(&dev_priv->engine[VCS2]);
+		break;
+	case I915_PARAM_HAS_RELAXED_FENCING:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_COHERENT_RINGS:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXEC_CONSTANTS:
+		value = INTEL_INFO(dev)->gen >= 4;
+		break;
+	case I915_PARAM_HAS_RELAXED_DELTA:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_GEN7_SOL_RESET:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_LLC:
+		value = HAS_LLC(dev);
+		break;
+	case I915_PARAM_HAS_WT:
+		value = HAS_WT(dev);
+		break;
+	case I915_PARAM_HAS_ALIASING_PPGTT:
+		value = USES_PPGTT(dev);
+		break;
+	case I915_PARAM_HAS_WAIT_TIMEOUT:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_SEMAPHORES:
+		value = i915_semaphore_is_enabled(dev_priv);
+		break;
+	case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_SECURE_BATCHES:
+		value = capable(CAP_SYS_ADMIN);
+		break;
+	case I915_PARAM_HAS_PINNED_BATCHES:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXEC_NO_RELOC:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXEC_HANDLE_LUT:
+		value = 1;
+		break;
+	case I915_PARAM_CMD_PARSER_VERSION:
+		value = i915_cmd_parser_get_version(dev_priv);
+		break;
+	case I915_PARAM_HAS_COHERENT_PHYS_GTT:
+		value = 1;
+		break;
+	case I915_PARAM_MMAP_VERSION:
+		value = 1;
+		break;
+	case I915_PARAM_SUBSLICE_TOTAL:
+		value = INTEL_INFO(dev)->subslice_total;
+		if (!value)
+			return -ENODEV;
+		break;
+	case I915_PARAM_EU_TOTAL:
+		value = INTEL_INFO(dev)->eu_total;
+		if (!value)
+			return -ENODEV;
+		break;
+	case I915_PARAM_HAS_GPU_RESET:
+		value = i915.enable_hangcheck && intel_has_gpu_reset(dev_priv);
+		break;
+	case I915_PARAM_HAS_RESOURCE_STREAMER:
+		value = HAS_RESOURCE_STREAMER(dev);
+		break;
+	case I915_PARAM_HAS_EXEC_SOFTPIN:
+		value = 1;
+		break;
+	default:
+		DRM_DEBUG("Unknown parameter %d\n", param->param);
+		return -EINVAL;
+	}
+
+	if (copy_to_user(param->value, &value, sizeof(int))) {
+		DRM_ERROR("copy_to_user failed\n");
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int i915_get_bridge_dev(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+	if (!dev_priv->bridge_dev) {
+		DRM_ERROR("bridge device not found\n");
+		return -1;
+	}
+	return 0;
+}
+
+/* Allocate space for the MCH regs if needed, return nonzero on error */
+static int
+intel_alloc_mchbar_resource(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp_lo, temp_hi = 0;
+	u64 mchbar_addr;
+	int ret;
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
+	pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
+	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
+
+	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
+	if (mchbar_addr &&
+	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
+		return 0;
+#endif
+
+	/* Get some space for it */
+	dev_priv->mch_res.name = "i915 MCHBAR";
+	dev_priv->mch_res.flags = IORESOURCE_MEM;
+	ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
+				     &dev_priv->mch_res,
+				     MCHBAR_SIZE, MCHBAR_SIZE,
+				     PCIBIOS_MIN_MEM,
+				     0, pcibios_align_resource,
+				     dev_priv->bridge_dev);
+	if (ret) {
+		DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
+		dev_priv->mch_res.start = 0;
+		return ret;
+	}
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
+				       upper_32_bits(dev_priv->mch_res.start));
+
+	pci_write_config_dword(dev_priv->bridge_dev, reg,
+			       lower_32_bits(dev_priv->mch_res.start));
+	return 0;
+}
+
+/* Setup MCHBAR if possible, return true if we should disable it again */
+static void
+intel_setup_mchbar(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp;
+	bool enabled;
+
+	if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+		return;
+
+	dev_priv->mchbar_need_disable = false;
+
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp);
+		enabled = !!(temp & DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+		enabled = temp & 1;
+	}
+
+	/* If it's already enabled, don't have to do anything */
+	if (enabled)
+		return;
+
+	if (intel_alloc_mchbar_resource(dev))
+		return;
+
+	dev_priv->mchbar_need_disable = true;
+
+	/* Space is allocated or reserved, so enable it. */
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
+				       temp | DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+		pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
+	}
+}
+
+static void
+intel_teardown_mchbar(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+
+	if (dev_priv->mchbar_need_disable) {
+		if (IS_I915G(dev) || IS_I915GM(dev)) {
+			u32 deven_val;
+
+			pci_read_config_dword(dev_priv->bridge_dev, DEVEN,
+					      &deven_val);
+			deven_val &= ~DEVEN_MCHBAR_EN;
+			pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
+					       deven_val);
+		} else {
+			u32 mchbar_val;
+
+			pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg,
+					      &mchbar_val);
+			mchbar_val &= ~1;
+			pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg,
+					       mchbar_val);
+		}
+	}
+
+	if (dev_priv->mch_res.start)
+		release_resource(&dev_priv->mch_res);
+}
+
+/* true = enable decode, false = disable decoder */
+static unsigned int i915_vga_set_decode(void *cookie, bool state)
+{
+	struct drm_device *dev = cookie;
+
+	intel_modeset_vga_set_state(dev, state);
+	if (state)
+		return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
+		       VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
+	else
+		return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
+}
+
+static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
+
+	if (state == VGA_SWITCHEROO_ON) {
+		pr_info("switched on\n");
+		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
+		/* i915 resume handler doesn't set to D0 */
+		pci_set_power_state(dev->pdev, PCI_D0);
+		i915_resume_switcheroo(dev);
+		dev->switch_power_state = DRM_SWITCH_POWER_ON;
+	} else {
+		pr_info("switched off\n");
+		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
+		i915_suspend_switcheroo(dev, pmm);
+		dev->switch_power_state = DRM_SWITCH_POWER_OFF;
+	}
+}
+
+static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+
+	/*
+	 * FIXME: open_count is protected by drm_global_mutex but that would lead to
+	 * locking inversion with the driver load path. And the access here is
+	 * completely racy anyway. So don't bother with locking for now.
+	 */
+	return dev->open_count == 0;
+}
+
+static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
+	.set_gpu_state = i915_switcheroo_set_state,
+	.reprobe = NULL,
+	.can_switch = i915_switcheroo_can_switch,
+};
+
+static void i915_gem_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+
+	/*
+	 * Neither the BIOS, ourselves or any other kernel
+	 * expects the system to be in execlists mode on startup,
+	 * so we need to reset the GPU back to legacy mode. And the only
+	 * known way to disable logical contexts is through a GPU reset.
+	 *
+	 * So in order to leave the system in a known default configuration,
+	 * always reset the GPU upon unload. Afterwards we then clean up the
+	 * GEM state tracking, flushing off the requests and leaving the
+	 * system in a known idle state.
+	 *
+	 * Note that is of the upmost importance that the GPU is idle and
+	 * all stray writes are flushed *before* we dismantle the backing
+	 * storage for the pinned objects.
+	 *
+	 * However, since we are uncertain that reseting the GPU on older
+	 * machines is a good idea, we don't - just in case it leaves the
+	 * machine in an unusable condition.
+	 */
+	if (HAS_HW_CONTEXTS(dev)) {
+		int reset = intel_gpu_reset(dev_priv, ALL_ENGINES);
+		WARN_ON(reset && reset != -ENODEV);
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_reset(dev);
+	i915_gem_cleanup_engines(dev);
+	i915_gem_context_fini(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	WARN_ON(!list_empty(&to_i915(dev)->context_list));
+}
+
+static int i915_load_modeset_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	if (i915_inject_load_failure())
+		return -ENODEV;
+
+	ret = intel_bios_init(dev_priv);
+	if (ret)
+		DRM_INFO("failed to find VBIOS tables\n");
+
+	/* If we have > 1 VGA cards, then we need to arbitrate access
+	 * to the common VGA resources.
+	 *
+	 * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
+	 * then we do not take part in VGA arbitration and the
+	 * vga_client_register() fails with -ENODEV.
+	 */
+	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
+	if (ret && ret != -ENODEV)
+		goto out;
+
+	intel_register_dsm_handler();
+
+	ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false);
+	if (ret)
+		goto cleanup_vga_client;
+
+	/* must happen before intel_power_domains_init_hw() on VLV/CHV */
+	intel_update_rawclk(dev_priv);
+
+	intel_power_domains_init_hw(dev_priv, false);
+
+	intel_csr_ucode_init(dev_priv);
+
+	ret = intel_irq_install(dev_priv);
+	if (ret)
+		goto cleanup_csr;
+
+	intel_setup_gmbus(dev);
+
+	/* Important: The output setup functions called by modeset_init need
+	 * working irqs for e.g. gmbus and dp aux transfers. */
+	intel_modeset_init(dev);
+
+	intel_guc_init(dev);
+
+	ret = i915_gem_init(dev);
+	if (ret)
+		goto cleanup_irq;
+
+	intel_modeset_gem_init(dev);
+
+	if (INTEL_INFO(dev)->num_pipes == 0)
+		return 0;
+
+	ret = intel_fbdev_init(dev);
+	if (ret)
+		goto cleanup_gem;
+
+	/* Only enable hotplug handling once the fbdev is fully set up. */
+	intel_hpd_init(dev_priv);
+
+	drm_kms_helper_poll_init(dev);
+
+	return 0;
+
+cleanup_gem:
+	i915_gem_fini(dev);
+cleanup_irq:
+	intel_guc_fini(dev);
+	drm_irq_uninstall(dev);
+	intel_teardown_gmbus(dev);
+cleanup_csr:
+	intel_csr_ucode_fini(dev_priv);
+	intel_power_domains_fini(dev_priv);
+	vga_switcheroo_unregister_client(dev->pdev);
+cleanup_vga_client:
+	vga_client_register(dev->pdev, NULL, NULL, NULL);
+out:
+	return ret;
+}
+
+#if IS_ENABLED(CONFIG_FB)
+static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+	struct apertures_struct *ap;
+	struct pci_dev *pdev = dev_priv->dev->pdev;
+	struct i915_ggtt *ggtt = &dev_priv->ggtt;
+	bool primary;
+	int ret;
+
+	ap = alloc_apertures(1);
+	if (!ap)
+		return -ENOMEM;
+
+	ap->ranges[0].base = ggtt->mappable_base;
+	ap->ranges[0].size = ggtt->mappable_end;
+
+	primary =
+		pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+	ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+	kfree(ap);
+
+	return ret;
+}
+#else
+static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_VGA_CONSOLE)
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+	return 0;
+}
+#elif !defined(CONFIG_DUMMY_CONSOLE)
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+	return -ENODEV;
+}
+#else
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+	int ret = 0;
+
+	DRM_INFO("Replacing VGA console driver\n");
+
+	console_lock();
+	if (con_is_bound(&vga_con))
+		ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
+	if (ret == 0) {
+		ret = do_unregister_con_driver(&vga_con);
+
+		/* Ignore "already unregistered". */
+		if (ret == -ENODEV)
+			ret = 0;
+	}
+	console_unlock();
+
+	return ret;
+}
+#endif
+
+static void i915_dump_device_info(struct drm_i915_private *dev_priv)
+{
+	const struct intel_device_info *info = &dev_priv->info;
+
+#define PRINT_S(name) "%s"
+#define SEP_EMPTY
+#define PRINT_FLAG(name) info->name ? #name "," : ""
+#define SEP_COMMA ,
+	DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
+			 DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
+			 info->gen,
+			 dev_priv->dev->pdev->device,
+			 dev_priv->dev->pdev->revision,
+			 DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
+#undef PRINT_S
+#undef SEP_EMPTY
+#undef PRINT_FLAG
+#undef SEP_COMMA
+}
+
+static void cherryview_sseu_info_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_device_info *info;
+	u32 fuse, eu_dis;
+
+	info = (struct intel_device_info *)&dev_priv->info;
+	fuse = I915_READ(CHV_FUSE_GT);
+
+	info->slice_total = 1;
+
+	if (!(fuse & CHV_FGT_DISABLE_SS0)) {
+		info->subslice_per_slice++;
+		eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
+				 CHV_FGT_EU_DIS_SS0_R1_MASK);
+		info->eu_total += 8 - hweight32(eu_dis);
+	}
+
+	if (!(fuse & CHV_FGT_DISABLE_SS1)) {
+		info->subslice_per_slice++;
+		eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
+				 CHV_FGT_EU_DIS_SS1_R1_MASK);
+		info->eu_total += 8 - hweight32(eu_dis);
+	}
+
+	info->subslice_total = info->subslice_per_slice;
+	/*
+	 * CHV expected to always have a uniform distribution of EU
+	 * across subslices.
+	*/
+	info->eu_per_subslice = info->subslice_total ?
+				info->eu_total / info->subslice_total :
+				0;
+	/*
+	 * CHV supports subslice power gating on devices with more than
+	 * one subslice, and supports EU power gating on devices with
+	 * more than one EU pair per subslice.
+	*/
+	info->has_slice_pg = 0;
+	info->has_subslice_pg = (info->subslice_total > 1);
+	info->has_eu_pg = (info->eu_per_subslice > 2);
+}
+
+static void gen9_sseu_info_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_device_info *info;
+	int s_max = 3, ss_max = 4, eu_max = 8;
+	int s, ss;
+	u32 fuse2, s_enable, ss_disable, eu_disable;
+	u8 eu_mask = 0xff;
+
+	info = (struct intel_device_info *)&dev_priv->info;
+	fuse2 = I915_READ(GEN8_FUSE2);
+	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
+		   GEN8_F2_S_ENA_SHIFT;
+	ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
+		     GEN9_F2_SS_DIS_SHIFT;
+
+	info->slice_total = hweight32(s_enable);
+	/*
+	 * The subslice disable field is global, i.e. it applies
+	 * to each of the enabled slices.
+	*/
+	info->subslice_per_slice = ss_max - hweight32(ss_disable);
+	info->subslice_total = info->slice_total *
+			       info->subslice_per_slice;
+
+	/*
+	 * Iterate through enabled slices and subslices to
+	 * count the total enabled EU.
+	*/
+	for (s = 0; s < s_max; s++) {
+		if (!(s_enable & (0x1 << s)))
+			/* skip disabled slice */
+			continue;
+
+		eu_disable = I915_READ(GEN9_EU_DISABLE(s));
+		for (ss = 0; ss < ss_max; ss++) {
+			int eu_per_ss;
+
+			if (ss_disable & (0x1 << ss))
+				/* skip disabled subslice */
+				continue;
+
+			eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
+						      eu_mask);
+
+			/*
+			 * Record which subslice(s) has(have) 7 EUs. we
+			 * can tune the hash used to spread work among
+			 * subslices if they are unbalanced.
+			 */
+			if (eu_per_ss == 7)
+				info->subslice_7eu[s] |= 1 << ss;
+
+			info->eu_total += eu_per_ss;
+		}
+	}
+
+	/*
+	 * SKL is expected to always have a uniform distribution
+	 * of EU across subslices with the exception that any one
+	 * EU in any one subslice may be fused off for die
+	 * recovery. BXT is expected to be perfectly uniform in EU
+	 * distribution.
+	*/
+	info->eu_per_subslice = info->subslice_total ?
+				DIV_ROUND_UP(info->eu_total,
+					     info->subslice_total) : 0;
+	/*
+	 * SKL supports slice power gating on devices with more than
+	 * one slice, and supports EU power gating on devices with
+	 * more than one EU pair per subslice. BXT supports subslice
+	 * power gating on devices with more than one subslice, and
+	 * supports EU power gating on devices with more than one EU
+	 * pair per subslice.
+	*/
+	info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
+			       (info->slice_total > 1));
+	info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
+	info->has_eu_pg = (info->eu_per_subslice > 2);
+
+	if (IS_BROXTON(dev)) {
+#define IS_SS_DISABLED(_ss_disable, ss)    (_ss_disable & (0x1 << ss))
+		/*
+		 * There is a HW issue in 2x6 fused down parts that requires
+		 * Pooled EU to be enabled as a WA. The pool configuration
+		 * changes depending upon which subslice is fused down. This
+		 * doesn't affect if the device has all 3 subslices enabled.
+		 */
+		/* WaEnablePooledEuFor2x6:bxt */
+		info->has_pooled_eu = ((info->subslice_per_slice == 3) ||
+				       (info->subslice_per_slice == 2 &&
+					INTEL_REVID(dev) < BXT_REVID_C0));
+
+		info->min_eu_in_pool = 0;
+		if (info->has_pooled_eu) {
+			if (IS_SS_DISABLED(ss_disable, 0) ||
+			    IS_SS_DISABLED(ss_disable, 2))
+				info->min_eu_in_pool = 3;
+			else if (IS_SS_DISABLED(ss_disable, 1))
+				info->min_eu_in_pool = 6;
+			else
+				info->min_eu_in_pool = 9;
+		}
+#undef IS_SS_DISABLED
+	}
+}
+
+static void broadwell_sseu_info_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_device_info *info;
+	const int s_max = 3, ss_max = 3, eu_max = 8;
+	int s, ss;
+	u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
+
+	fuse2 = I915_READ(GEN8_FUSE2);
+	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
+	ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
+
+	eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
+	eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
+			((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
+			 (32 - GEN8_EU_DIS0_S1_SHIFT));
+	eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
+			((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
+			 (32 - GEN8_EU_DIS1_S2_SHIFT));
+
+
+	info = (struct intel_device_info *)&dev_priv->info;
+	info->slice_total = hweight32(s_enable);
+
+	/*
+	 * The subslice disable field is global, i.e. it applies
+	 * to each of the enabled slices.
+	 */
+	info->subslice_per_slice = ss_max - hweight32(ss_disable);
+	info->subslice_total = info->slice_total * info->subslice_per_slice;
+
+	/*
+	 * Iterate through enabled slices and subslices to
+	 * count the total enabled EU.
+	 */
+	for (s = 0; s < s_max; s++) {
+		if (!(s_enable & (0x1 << s)))
+			/* skip disabled slice */
+			continue;
+
+		for (ss = 0; ss < ss_max; ss++) {
+			u32 n_disabled;
+
+			if (ss_disable & (0x1 << ss))
+				/* skip disabled subslice */
+				continue;
+
+			n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
+
+			/*
+			 * Record which subslices have 7 EUs.
+			 */
+			if (eu_max - n_disabled == 7)
+				info->subslice_7eu[s] |= 1 << ss;
+
+			info->eu_total += eu_max - n_disabled;
+		}
+	}
+
+	/*
+	 * BDW is expected to always have a uniform distribution of EU across
+	 * subslices with the exception that any one EU in any one subslice may
+	 * be fused off for die recovery.
+	 */
+	info->eu_per_subslice = info->subslice_total ?
+		DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
+
+	/*
+	 * BDW supports slice power gating on devices with more than
+	 * one slice.
+	 */
+	info->has_slice_pg = (info->slice_total > 1);
+	info->has_subslice_pg = 0;
+	info->has_eu_pg = 0;
+}
+
+/*
+ * Determine various intel_device_info fields at runtime.
+ *
+ * Use it when either:
+ *   - it's judged too laborious to fill n static structures with the limit
+ *     when a simple if statement does the job,
+ *   - run-time checks (eg read fuse/strap registers) are needed.
+ *
+ * This function needs to be called:
+ *   - after the MMIO has been setup as we are reading registers,
+ *   - after the PCH has been detected,
+ *   - before the first usage of the fields it can tweak.
+ */
+static void intel_device_info_runtime_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_device_info *info;
+	enum pipe pipe;
+
+	info = (struct intel_device_info *)&dev_priv->info;
+
+	/*
+	 * Skylake and Broxton currently don't expose the topmost plane as its
+	 * use is exclusive with the legacy cursor and we only want to expose
+	 * one of those, not both. Until we can safely expose the topmost plane
+	 * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
+	 * we don't expose the topmost plane at all to prevent ABI breakage
+	 * down the line.
+	 */
+	if (IS_BROXTON(dev)) {
+		info->num_sprites[PIPE_A] = 2;
+		info->num_sprites[PIPE_B] = 2;
+		info->num_sprites[PIPE_C] = 1;
+	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+		for_each_pipe(dev_priv, pipe)
+			info->num_sprites[pipe] = 2;
+	else
+		for_each_pipe(dev_priv, pipe)
+			info->num_sprites[pipe] = 1;
+
+	if (i915.disable_display) {
+		DRM_INFO("Display disabled (module parameter)\n");
+		info->num_pipes = 0;
+	} else if (info->num_pipes > 0 &&
+		   (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
+		   HAS_PCH_SPLIT(dev)) {
+		u32 fuse_strap = I915_READ(FUSE_STRAP);
+		u32 sfuse_strap = I915_READ(SFUSE_STRAP);
+
+		/*
+		 * SFUSE_STRAP is supposed to have a bit signalling the display
+		 * is fused off. Unfortunately it seems that, at least in
+		 * certain cases, fused off display means that PCH display
+		 * reads don't land anywhere. In that case, we read 0s.
+		 *
+		 * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
+		 * should be set when taking over after the firmware.
+		 */
+		if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
+		    sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
+		    (dev_priv->pch_type == PCH_CPT &&
+		     !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
+			DRM_INFO("Display fused off, disabling\n");
+			info->num_pipes = 0;
+		} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
+			DRM_INFO("PipeC fused off\n");
+			info->num_pipes -= 1;
+		}
+	} else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
+		u32 dfsm = I915_READ(SKL_DFSM);
+		u8 disabled_mask = 0;
+		bool invalid;
+		int num_bits;
+
+		if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
+			disabled_mask |= BIT(PIPE_A);
+		if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
+			disabled_mask |= BIT(PIPE_B);
+		if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
+			disabled_mask |= BIT(PIPE_C);
+
+		num_bits = hweight8(disabled_mask);
+
+		switch (disabled_mask) {
+		case BIT(PIPE_A):
+		case BIT(PIPE_B):
+		case BIT(PIPE_A) | BIT(PIPE_B):
+		case BIT(PIPE_A) | BIT(PIPE_C):
+			invalid = true;
+			break;
+		default:
+			invalid = false;
+		}
+
+		if (num_bits > info->num_pipes || invalid)
+			DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
+				  disabled_mask);
+		else
+			info->num_pipes -= num_bits;
+	}
+
+	/* Initialize slice/subslice/EU info */
+	if (IS_CHERRYVIEW(dev))
+		cherryview_sseu_info_init(dev);
+	else if (IS_BROADWELL(dev))
+		broadwell_sseu_info_init(dev);
+	else if (INTEL_INFO(dev)->gen >= 9)
+		gen9_sseu_info_init(dev);
+
+	info->has_snoop = !info->has_llc;
+
+	/* Snooping is broken on BXT A stepping. */
+	if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
+		info->has_snoop = false;
+
+	DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
+	DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
+	DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
+	DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
+	DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
+	DRM_DEBUG_DRIVER("has slice power gating: %s\n",
+			 info->has_slice_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
+			 info->has_subslice_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
+			 info->has_eu_pg ? "y" : "n");
+
+	i915.enable_execlists =
+		intel_sanitize_enable_execlists(dev_priv,
+					       	i915.enable_execlists);
+
+	/*
+	 * i915.enable_ppgtt is read-only, so do an early pass to validate the
+	 * user's requested state against the hardware/driver capabilities.  We
+	 * do this now so that we can print out any log messages once rather
+	 * than every time we check intel_enable_ppgtt().
+	 */
+	i915.enable_ppgtt =
+		intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
+	DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
+}
+
+static void intel_init_dpio(struct drm_i915_private *dev_priv)
+{
+	/*
+	 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
+	 * CHV x1 PHY (DP/HDMI D)
+	 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
+	 */
+	if (IS_CHERRYVIEW(dev_priv)) {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
+		DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
+	} else if (IS_VALLEYVIEW(dev_priv)) {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+	}
+}
+
+static int i915_workqueues_init(struct drm_i915_private *dev_priv)
+{
+	/*
+	 * The i915 workqueue is primarily used for batched retirement of
+	 * requests (and thus managing bo) once the task has been completed
+	 * by the GPU. i915_gem_retire_requests() is called directly when we
+	 * need high-priority retirement, such as waiting for an explicit
+	 * bo.
+	 *
+	 * It is also used for periodic low-priority events, such as
+	 * idle-timers and recording error state.
+	 *
+	 * All tasks on the workqueue are expected to acquire the dev mutex
+	 * so there is no point in running more than one instance of the
+	 * workqueue at any time.  Use an ordered one.
+	 */
+	dev_priv->wq = alloc_ordered_workqueue("i915", 0);
+	if (dev_priv->wq == NULL)
+		goto out_err;
+
+	dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
+	if (dev_priv->hotplug.dp_wq == NULL)
+		goto out_free_wq;
+
+	dev_priv->gpu_error.hangcheck_wq =
+		alloc_ordered_workqueue("i915-hangcheck", 0);
+	if (dev_priv->gpu_error.hangcheck_wq == NULL)
+		goto out_free_dp_wq;
+
+	return 0;
+
+out_free_dp_wq:
+	destroy_workqueue(dev_priv->hotplug.dp_wq);
+out_free_wq:
+	destroy_workqueue(dev_priv->wq);
+out_err:
+	DRM_ERROR("Failed to allocate workqueues.\n");
+
+	return -ENOMEM;
+}
+
+static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
+{
+	destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
+	destroy_workqueue(dev_priv->hotplug.dp_wq);
+	destroy_workqueue(dev_priv->wq);
+}
+
+/**
+ * i915_driver_init_early - setup state not requiring device access
+ * @dev_priv: device private
+ *
+ * Initialize everything that is a "SW-only" state, that is state not
+ * requiring accessing the device or exposing the driver via kernel internal
+ * or userspace interfaces. Example steps belonging here: lock initialization,
+ * system memory allocation, setting up device specific attributes and
+ * function hooks not requiring accessing the device.
+ */
+static int i915_driver_init_early(struct drm_i915_private *dev_priv,
+				  const struct pci_device_id *ent)
+{
+	const struct intel_device_info *match_info =
+		(struct intel_device_info *)ent->driver_data;
+	struct intel_device_info *device_info;
+	int ret = 0;
+
+	if (i915_inject_load_failure())
+		return -ENODEV;
+
+	/* Setup the write-once "constant" device info */
+	device_info = (struct intel_device_info *)&dev_priv->info;
+	memcpy(device_info, match_info, sizeof(*device_info));
+	device_info->device_id = dev_priv->drm.pdev->device;
+
+	BUG_ON(device_info->gen > sizeof(device_info->gen_mask) * BITS_PER_BYTE);
+	device_info->gen_mask = BIT(device_info->gen - 1);
+
+	spin_lock_init(&dev_priv->irq_lock);
+	spin_lock_init(&dev_priv->gpu_error.lock);
+	mutex_init(&dev_priv->backlight_lock);
+	spin_lock_init(&dev_priv->uncore.lock);
+	spin_lock_init(&dev_priv->mm.object_stat_lock);
+	spin_lock_init(&dev_priv->mmio_flip_lock);
+	mutex_init(&dev_priv->sb_lock);
+	mutex_init(&dev_priv->modeset_restore_lock);
+	mutex_init(&dev_priv->av_mutex);
+	mutex_init(&dev_priv->wm.wm_mutex);
+	mutex_init(&dev_priv->pps_mutex);
+
+	ret = i915_workqueues_init(dev_priv);
+	if (ret < 0)
+		return ret;
+
+	ret = intel_gvt_init(dev_priv);
+	if (ret < 0)
+		goto err_workqueues;
+
+	/* This must be called before any calls to HAS_PCH_* */
+	intel_detect_pch(&dev_priv->drm);
+
+	intel_pm_setup(&dev_priv->drm);
+	intel_init_dpio(dev_priv);
+	intel_power_domains_init(dev_priv);
+	intel_irq_init(dev_priv);
+	intel_init_display_hooks(dev_priv);
+	intel_init_clock_gating_hooks(dev_priv);
+	intel_init_audio_hooks(dev_priv);
+	i915_gem_load_init(&dev_priv->drm);
+
+	intel_display_crc_init(&dev_priv->drm);
+
+	i915_dump_device_info(dev_priv);
+
+	/* Not all pre-production machines fall into this category, only the
+	 * very first ones. Almost everything should work, except for maybe
+	 * suspend/resume. And we don't implement workarounds that affect only
+	 * pre-production machines. */
+	if (IS_HSW_EARLY_SDV(dev_priv))
+		DRM_INFO("This is an early pre-production Haswell machine. "
+			 "It may not be fully functional.\n");
+
+	return 0;
+
+err_workqueues:
+	i915_workqueues_cleanup(dev_priv);
+	return ret;
+}
+
+/**
+ * i915_driver_cleanup_early - cleanup the setup done in i915_driver_init_early()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv)
+{
+	i915_gem_load_cleanup(dev_priv->dev);
+	i915_workqueues_cleanup(dev_priv);
+}
+
+static int i915_mmio_setup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	int mmio_bar;
+	int mmio_size;
+
+	mmio_bar = IS_GEN2(dev) ? 1 : 0;
+	/*
+	 * Before gen4, the registers and the GTT are behind different BARs.
+	 * However, from gen4 onwards, the registers and the GTT are shared
+	 * in the same BAR, so we want to restrict this ioremap from
+	 * clobbering the GTT which we want ioremap_wc instead. Fortunately,
+	 * the register BAR remains the same size for all the earlier
+	 * generations up to Ironlake.
+	 */
+	if (INTEL_INFO(dev)->gen < 5)
+		mmio_size = 512 * 1024;
+	else
+		mmio_size = 2 * 1024 * 1024;
+	dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
+	if (dev_priv->regs == NULL) {
+		DRM_ERROR("failed to map registers\n");
+
+		return -EIO;
+	}
+
+	/* Try to make sure MCHBAR is enabled before poking at it */
+	intel_setup_mchbar(dev);
+
+	return 0;
+}
+
+static void i915_mmio_cleanup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+
+	intel_teardown_mchbar(dev);
+	pci_iounmap(dev->pdev, dev_priv->regs);
+}
+
+/**
+ * i915_driver_init_mmio - setup device MMIO
+ * @dev_priv: device private
+ *
+ * Setup minimal device state necessary for MMIO accesses later in the
+ * initialization sequence. The setup here should avoid any other device-wide
+ * side effects or exposing the driver via kernel internal or user space
+ * interfaces.
+ */
+static int i915_driver_init_mmio(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	int ret;
+
+	if (i915_inject_load_failure())
+		return -ENODEV;
+
+	if (i915_get_bridge_dev(dev))
+		return -EIO;
+
+	ret = i915_mmio_setup(dev);
+	if (ret < 0)
+		goto put_bridge;
+
+	intel_uncore_init(dev_priv);
+
+	return 0;
+
+put_bridge:
+	pci_dev_put(dev_priv->bridge_dev);
+
+	return ret;
+}
+
+/**
+ * i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	intel_uncore_fini(dev_priv);
+	i915_mmio_cleanup(dev);
+	pci_dev_put(dev_priv->bridge_dev);
+}
+
+/**
+ * i915_driver_init_hw - setup state requiring device access
+ * @dev_priv: device private
+ *
+ * Setup state that requires accessing the device, but doesn't require
+ * exposing the driver via kernel internal or userspace interfaces.
+ */
+static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct i915_ggtt *ggtt = &dev_priv->ggtt;
+	uint32_t aperture_size;
+	int ret;
+
+	if (i915_inject_load_failure())
+		return -ENODEV;
+
+	intel_device_info_runtime_init(dev);
+
+	ret = i915_ggtt_init_hw(dev);
+	if (ret)
+		return ret;
+
+	ret = i915_ggtt_enable_hw(dev);
+	if (ret) {
+		DRM_ERROR("failed to enable GGTT\n");
+		goto out_ggtt;
+	}
+
+	/* WARNING: Apparently we must kick fbdev drivers before vgacon,
+	 * otherwise the vga fbdev driver falls over. */
+	ret = i915_kick_out_firmware_fb(dev_priv);
+	if (ret) {
+		DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
+		goto out_ggtt;
+	}
+
+	ret = i915_kick_out_vgacon(dev_priv);
+	if (ret) {
+		DRM_ERROR("failed to remove conflicting VGA console\n");
+		goto out_ggtt;
+	}
+
+	pci_set_master(dev->pdev);
+
+	/* overlay on gen2 is broken and can't address above 1G */
+	if (IS_GEN2(dev)) {
+		ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
+		if (ret) {
+			DRM_ERROR("failed to set DMA mask\n");
+
+			goto out_ggtt;
+		}
+	}
+
+
+	/* 965GM sometimes incorrectly writes to hardware status page (HWS)
+	 * using 32bit addressing, overwriting memory if HWS is located
+	 * above 4GB.
+	 *
+	 * The documentation also mentions an issue with undefined
+	 * behaviour if any general state is accessed within a page above 4GB,
+	 * which also needs to be handled carefully.
+	 */
+	if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) {
+		ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
+
+		if (ret) {
+			DRM_ERROR("failed to set DMA mask\n");
+
+			goto out_ggtt;
+		}
+	}
+
+	aperture_size = ggtt->mappable_end;
+
+	ggtt->mappable =
+		io_mapping_create_wc(ggtt->mappable_base,
+				     aperture_size);
+	if (!ggtt->mappable) {
+		ret = -EIO;
+		goto out_ggtt;
+	}
+
+	ggtt->mtrr = arch_phys_wc_add(ggtt->mappable_base,
+					      aperture_size);
+
+	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
+
+	intel_uncore_sanitize(dev_priv);
+
+	intel_opregion_setup(dev_priv);
+
+	i915_gem_load_init_fences(dev_priv);
+
+	/* On the 945G/GM, the chipset reports the MSI capability on the
+	 * integrated graphics even though the support isn't actually there
+	 * according to the published specs.  It doesn't appear to function
+	 * correctly in testing on 945G.
+	 * This may be a side effect of MSI having been made available for PEG
+	 * and the registers being closely associated.
+	 *
+	 * According to chipset errata, on the 965GM, MSI interrupts may
+	 * be lost or delayed, but we use them anyways to avoid
+	 * stuck interrupts on some machines.
+	 */
+	if (!IS_I945G(dev) && !IS_I945GM(dev)) {
+		if (pci_enable_msi(dev->pdev) < 0)
+			DRM_DEBUG_DRIVER("can't enable MSI");
+	}
+
+	return 0;
+
+out_ggtt:
+	i915_ggtt_cleanup_hw(dev);
+
+	return ret;
+}
+
+/**
+ * i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct i915_ggtt *ggtt = &dev_priv->ggtt;
+
+	if (dev->pdev->msi_enabled)
+		pci_disable_msi(dev->pdev);
+
+	pm_qos_remove_request(&dev_priv->pm_qos);
+	arch_phys_wc_del(ggtt->mtrr);
+	io_mapping_free(ggtt->mappable);
+	i915_ggtt_cleanup_hw(dev);
+}
+
+/**
+ * i915_driver_register - register the driver with the rest of the system
+ * @dev_priv: device private
+ *
+ * Perform any steps necessary to make the driver available via kernel
+ * internal or userspace interfaces.
+ */
+static void i915_driver_register(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	i915_gem_shrinker_init(dev_priv);
+
+	/*
+	 * Notify a valid surface after modesetting,
+	 * when running inside a VM.
+	 */
+	if (intel_vgpu_active(dev_priv))
+		I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
+
+	/* Reveal our presence to userspace */
+	if (drm_dev_register(dev, 0) == 0) {
+		i915_debugfs_register(dev_priv);
+		i915_setup_sysfs(dev);
+	} else
+		DRM_ERROR("Failed to register driver for userspace access!\n");
+
+	if (INTEL_INFO(dev_priv)->num_pipes) {
+		/* Must be done after probing outputs */
+		intel_opregion_register(dev_priv);
+		acpi_video_register();
+	}
+
+	if (IS_GEN5(dev_priv))
+		intel_gpu_ips_init(dev_priv);
+
+	i915_audio_component_init(dev_priv);
+
+	/*
+	 * Some ports require correctly set-up hpd registers for detection to
+	 * work properly (leading to ghost connected connector status), e.g. VGA
+	 * on gm45.  Hence we can only set up the initial fbdev config after hpd
+	 * irqs are fully enabled. We do it last so that the async config
+	 * cannot run before the connectors are registered.
+	 */
+	intel_fbdev_initial_config_async(dev);
+}
+
+/**
+ * i915_driver_unregister - cleanup the registration done in i915_driver_regiser()
+ * @dev_priv: device private
+ */
+static void i915_driver_unregister(struct drm_i915_private *dev_priv)
+{
+	i915_audio_component_cleanup(dev_priv);
+
+	intel_gpu_ips_teardown();
+	acpi_video_unregister();
+	intel_opregion_unregister(dev_priv);
+
+	i915_teardown_sysfs(dev_priv->dev);
+	i915_debugfs_unregister(dev_priv);
+	drm_dev_unregister(dev_priv->dev);
+
+	i915_gem_shrinker_cleanup(dev_priv);
+}
+
+/**
+ * i915_driver_load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ *   - drive output discovery via intel_modeset_init()
+ *   - initialize the memory manager
+ *   - allocate initial config memory
+ *   - setup the DRM framebuffer with the allocated memory
+ */
+static int i915_driver_load(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
+{
+	struct drm_i915_private *dev_priv;
+	int ret;
 
-static const struct intel_device_info intel_skylake_info = {
-	BDW_FEATURES,
-	.is_skylake = 1,
-	.gen = 9,
-};
+	ret = -ENOMEM;
+	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
+	if (dev_priv)
+		ret = drm_dev_init(&dev_priv->drm, &driver, &pdev->dev);
+	if (ret) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "[" DRM_NAME ":%s] allocation failed\n", __func__);
+		kfree(dev_priv);
+		return ret;
+	}
 
-static const struct intel_device_info intel_skylake_gt3_info = {
-	BDW_FEATURES,
-	.is_skylake = 1,
-	.gen = 9,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
+	/* Must be set before calling __i915_printk */
+	dev_priv->drm.pdev = pdev;
+	dev_priv->drm.dev_private = dev_priv;
+	dev_priv->dev = &dev_priv->drm;
 
-static const struct intel_device_info intel_broxton_info = {
-	.is_preliminary = 1,
-	.is_broxton = 1,
-	.gen = 9,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
-	.num_pipes = 3,
-	.has_ddi = 1,
-	.has_fpga_dbg = 1,
-	.has_fbc = 1,
-	.has_pooled_eu = 0,
-	GEN_DEFAULT_PIPEOFFSETS,
-	IVB_CURSOR_OFFSETS,
-	BDW_COLORS,
-};
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto out_free_priv;
 
-static const struct intel_device_info intel_kabylake_info = {
-	BDW_FEATURES,
-	.is_kabylake = 1,
-	.gen = 9,
-};
+	pci_set_drvdata(pdev, &dev_priv->drm);
 
-static const struct intel_device_info intel_kabylake_gt3_info = {
-	BDW_FEATURES,
-	.is_kabylake = 1,
-	.gen = 9,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
+	ret = i915_driver_init_early(dev_priv, ent);
+	if (ret < 0)
+		goto out_pci_disable;
 
-/*
- * Make sure any device matches here are from most specific to most
- * general.  For example, since the Quanta match is based on the subsystem
- * and subvendor IDs, we need it to come before the more general IVB
- * PCI ID matches, otherwise we'll use the wrong info struct above.
- */
-static const struct pci_device_id pciidlist[] = {
-	INTEL_I830_IDS(&intel_i830_info),
-	INTEL_I845G_IDS(&intel_845g_info),
-	INTEL_I85X_IDS(&intel_i85x_info),
-	INTEL_I865G_IDS(&intel_i865g_info),
-	INTEL_I915G_IDS(&intel_i915g_info),
-	INTEL_I915GM_IDS(&intel_i915gm_info),
-	INTEL_I945G_IDS(&intel_i945g_info),
-	INTEL_I945GM_IDS(&intel_i945gm_info),
-	INTEL_I965G_IDS(&intel_i965g_info),
-	INTEL_G33_IDS(&intel_g33_info),
-	INTEL_I965GM_IDS(&intel_i965gm_info),
-	INTEL_GM45_IDS(&intel_gm45_info),
-	INTEL_G45_IDS(&intel_g45_info),
-	INTEL_PINEVIEW_IDS(&intel_pineview_info),
-	INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
-	INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
-	INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
-	INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
-	INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
-	INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
-	INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
-	INTEL_HSW_D_IDS(&intel_haswell_d_info),
-	INTEL_HSW_M_IDS(&intel_haswell_m_info),
-	INTEL_VLV_M_IDS(&intel_valleyview_m_info),
-	INTEL_VLV_D_IDS(&intel_valleyview_d_info),
-	INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),
-	INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),
-	INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),
-	INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info),
-	INTEL_CHV_IDS(&intel_cherryview_info),
-	INTEL_SKL_GT1_IDS(&intel_skylake_info),
-	INTEL_SKL_GT2_IDS(&intel_skylake_info),
-	INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
-	INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
-	INTEL_BXT_IDS(&intel_broxton_info),
-	INTEL_KBL_GT1_IDS(&intel_kabylake_info),
-	INTEL_KBL_GT2_IDS(&intel_kabylake_info),
-	INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
-	INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
-	{0, 0, 0}
-};
+	intel_runtime_pm_get(dev_priv);
 
-MODULE_DEVICE_TABLE(pci, pciidlist);
+	ret = i915_driver_init_mmio(dev_priv);
+	if (ret < 0)
+		goto out_runtime_pm_put;
 
-static enum intel_pch intel_virt_detect_pch(struct drm_device *dev)
-{
-	enum intel_pch ret = PCH_NOP;
+	ret = i915_driver_init_hw(dev_priv);
+	if (ret < 0)
+		goto out_cleanup_mmio;
 
 	/*
-	 * In a virtualized passthrough environment we can be in a
-	 * setup where the ISA bridge is not able to be passed through.
-	 * In this case, a south bridge can be emulated and we have to
-	 * make an educated guess as to which PCH is really there.
+	 * TODO: move the vblank init and parts of modeset init steps into one
+	 * of the i915_driver_init_/i915_driver_register functions according
+	 * to the role/effect of the given init step.
 	 */
-
-	if (IS_GEN5(dev)) {
-		ret = PCH_IBX;
-		DRM_DEBUG_KMS("Assuming Ibex Peak PCH\n");
-	} else if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
-		ret = PCH_CPT;
-		DRM_DEBUG_KMS("Assuming CouarPoint PCH\n");
-	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
-		ret = PCH_LPT;
-		DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
-	} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
-		ret = PCH_SPT;
-		DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
+	if (INTEL_INFO(dev_priv)->num_pipes) {
+		ret = drm_vblank_init(dev_priv->dev,
+				      INTEL_INFO(dev_priv)->num_pipes);
+		if (ret)
+			goto out_cleanup_hw;
 	}
 
+	ret = i915_load_modeset_init(dev_priv->dev);
+	if (ret < 0)
+		goto out_cleanup_vblank;
+
+	i915_driver_register(dev_priv);
+
+	intel_runtime_pm_enable(dev_priv);
+
+	intel_runtime_pm_put(dev_priv);
+
+	return 0;
+
+out_cleanup_vblank:
+	drm_vblank_cleanup(dev_priv->dev);
+out_cleanup_hw:
+	i915_driver_cleanup_hw(dev_priv);
+out_cleanup_mmio:
+	i915_driver_cleanup_mmio(dev_priv);
+out_runtime_pm_put:
+	intel_runtime_pm_put(dev_priv);
+	i915_driver_cleanup_early(dev_priv);
+out_pci_disable:
+	pci_disable_device(pdev);
+out_free_priv:
+	i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
+	drm_dev_unref(&dev_priv->drm);
 	return ret;
 }
 
-void intel_detect_pch(struct drm_device *dev)
+static int i915_driver_unload(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct pci_dev *pch = NULL;
+	int ret;
 
-	/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
-	 * (which really amounts to a PCH but no South Display).
-	 */
-	if (INTEL_INFO(dev)->num_pipes == 0) {
-		dev_priv->pch_type = PCH_NOP;
-		return;
+	intel_fbdev_fini(dev);
+
+	ret = i915_gem_suspend(dev);
+	if (ret) {
+		DRM_ERROR("failed to idle hardware: %d\n", ret);
+		return ret;
 	}
 
+	intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
+
+	i915_driver_unregister(dev_priv);
+
+	drm_vblank_cleanup(dev);
+
+	intel_modeset_cleanup(dev);
+
 	/*
-	 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
-	 * make graphics device passthrough work easy for VMM, that only
-	 * need to expose ISA bridge to let driver know the real hardware
-	 * underneath. This is a requirement from virtualization team.
-	 *
-	 * In some virtualized environments (e.g. XEN), there is irrelevant
-	 * ISA bridge in the system. To work reliably, we should scan trhough
-	 * all the ISA bridge devices and check for the first match, instead
-	 * of only checking the first one.
+	 * free the memory space allocated for the child device
+	 * config parsed from VBT
 	 */
-	while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
-		if (pch->vendor == PCI_VENDOR_ID_INTEL) {
-			unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
-			dev_priv->pch_id = id;
+	if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
+		kfree(dev_priv->vbt.child_dev);
+		dev_priv->vbt.child_dev = NULL;
+		dev_priv->vbt.child_dev_num = 0;
+	}
+	kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
+	dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
+	kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
+	dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
 
-			if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_IBX;
-				DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
-				WARN_ON(!IS_GEN5(dev));
-			} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_CPT;
-				DRM_DEBUG_KMS("Found CougarPoint PCH\n");
-				WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
-			} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
-				/* PantherPoint is CPT compatible */
-				dev_priv->pch_type = PCH_CPT;
-				DRM_DEBUG_KMS("Found PantherPoint PCH\n");
-				WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
-			} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_LPT;
-				DRM_DEBUG_KMS("Found LynxPoint PCH\n");
-				WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
-				WARN_ON(IS_HSW_ULT(dev) || IS_BDW_ULT(dev));
-			} else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_LPT;
-				DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
-				WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
-				WARN_ON(!IS_HSW_ULT(dev) && !IS_BDW_ULT(dev));
-			} else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_SPT;
-				DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
-				WARN_ON(!IS_SKYLAKE(dev) &&
-					!IS_KABYLAKE(dev));
-			} else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
-				dev_priv->pch_type = PCH_SPT;
-				DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
-				WARN_ON(!IS_SKYLAKE(dev) &&
-					!IS_KABYLAKE(dev));
-			} else if ((id == INTEL_PCH_P2X_DEVICE_ID_TYPE) ||
-				   (id == INTEL_PCH_P3X_DEVICE_ID_TYPE) ||
-				   ((id == INTEL_PCH_QEMU_DEVICE_ID_TYPE) &&
-				    pch->subsystem_vendor ==
-					    PCI_SUBVENDOR_ID_REDHAT_QUMRANET &&
-				    pch->subsystem_device ==
-					    PCI_SUBDEVICE_ID_QEMU)) {
-				dev_priv->pch_type = intel_virt_detect_pch(dev);
-			} else
-				continue;
+	vga_switcheroo_unregister_client(dev->pdev);
+	vga_client_register(dev->pdev, NULL, NULL, NULL);
 
-			break;
-		}
-	}
-	if (!pch)
-		DRM_DEBUG_KMS("No PCH found.\n");
+	intel_csr_ucode_fini(dev_priv);
 
-	pci_dev_put(pch);
+	/* Free error state after interrupts are fully disabled. */
+	cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
+	i915_destroy_error_state(dev);
+
+	/* Flush any outstanding unpin_work. */
+	flush_workqueue(dev_priv->wq);
+
+	intel_guc_fini(dev);
+	i915_gem_fini(dev);
+	intel_fbc_cleanup_cfb(dev_priv);
+
+	intel_power_domains_fini(dev_priv);
+
+	i915_driver_cleanup_hw(dev_priv);
+	i915_driver_cleanup_mmio(dev_priv);
+
+	intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
+
+	i915_driver_cleanup_early(dev_priv);
+
+	return 0;
 }
 
-bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv)
+static int i915_driver_open(struct drm_device *dev, struct drm_file *file)
 {
-	if (INTEL_GEN(dev_priv) < 6)
-		return false;
+	int ret;
 
-	if (i915.semaphores >= 0)
-		return i915.semaphores;
+	ret = i915_gem_open(dev, file);
+	if (ret)
+		return ret;
 
-	/* TODO: make semaphores and Execlists play nicely together */
-	if (i915.enable_execlists)
-		return false;
+	return 0;
+}
 
-#ifdef CONFIG_INTEL_IOMMU
-	/* Enable semaphores on SNB when IO remapping is off */
-	if (IS_GEN6(dev_priv) && intel_iommu_gfx_mapped)
-		return false;
-#endif
+/**
+ * i915_driver_lastclose - clean up after all DRM clients have exited
+ * @dev: DRM device
+ *
+ * Take care of cleaning up after all DRM clients have exited.  In the
+ * mode setting case, we want to restore the kernel's initial mode (just
+ * in case the last client left us in a bad state).
+ *
+ * Additionally, in the non-mode setting case, we'll tear down the GTT
+ * and DMA structures, since the kernel won't be using them, and clea
+ * up any GEM state.
+ */
+static void i915_driver_lastclose(struct drm_device *dev)
+{
+	intel_fbdev_restore_mode(dev);
+	vga_switcheroo_process_delayed_switch();
+}
 
-	return true;
+static void i915_driver_preclose(struct drm_device *dev, struct drm_file *file)
+{
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_context_close(dev, file);
+	i915_gem_release(dev, file);
+	mutex_unlock(&dev->struct_mutex);
+}
+
+static void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
+{
+	struct drm_i915_file_private *file_priv = file->driver_priv;
+
+	kfree(file_priv);
 }
 
 static void intel_suspend_encoders(struct drm_i915_private *dev_priv)
@@ -1034,7 +2638,7 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (vga_switcheroo_client_probe_defer(pdev))
 		return -EPROBE_DEFER;
 
-	return i915_driver_load(pdev, ent, &driver);
+	return i915_driver_load(pdev, ent);
 }
 
 static void
@@ -1742,6 +3346,68 @@ static const struct file_operations i915_driver_fops = {
 	.llseek = noop_llseek,
 };
 
+static int
+i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file)
+{
+	return -ENODEV;
+}
+
+static const struct drm_ioctl_desc i915_ioctls[] = {
+	DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE,  drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW),
+};
+
 static struct drm_driver driver = {
 	/* Don't use MTRRs here; the Xserver or userspace app should
 	 * deal with them for Intel hardware.
@@ -1767,6 +3433,7 @@ static struct drm_driver driver = {
 	.dumb_map_offset = i915_gem_mmap_gtt,
 	.dumb_destroy = drm_gem_dumb_destroy,
 	.ioctls = i915_ioctls,
+	.num_ioctls = ARRAY_SIZE(i915_ioctls),
 	.fops = &i915_driver_fops,
 	.name = DRIVER_NAME,
 	.desc = DRIVER_DESC,
@@ -1786,8 +3453,6 @@ static struct pci_driver i915_pci_driver = {
 
 static int __init i915_init(void)
 {
-	driver.num_ioctls = i915_max_ioctl;
-
 	/*
 	 * Enable KMS by default, unless explicitly overriden by
 	 * either the i915.modeset prarameter or by the
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e0fc47b8b7ee..5b68c07b3921 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2894,16 +2894,13 @@ struct drm_i915_cmd_table {
 
 #include "i915_trace.h"
 
-extern const struct drm_ioctl_desc i915_ioctls[];
-extern int i915_max_ioctl;
-
 extern int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state);
 extern int i915_resume_switcheroo(struct drm_device *dev);
 
 int intel_sanitize_enable_ppgtt(struct drm_i915_private *dev_priv,
 			       	int enable_ppgtt);
 
-/* i915_dma.c */
+/* i915_drv.c */
 void __printf(3, 4)
 __i915_printk(struct drm_i915_private *dev_priv, const char *level,
 	      const char *fmt, ...);
@@ -2911,16 +2908,6 @@ __i915_printk(struct drm_i915_private *dev_priv, const char *level,
 #define i915_report_error(dev_priv, fmt, ...)				   \
 	__i915_printk(dev_priv, KERN_ERR, fmt, ##__VA_ARGS__)
 
-extern int i915_driver_load(struct pci_dev *pdev,
-			    const struct pci_device_id *ent,
-			    struct drm_driver *driver);
-extern int i915_driver_unload(struct drm_device *);
-extern int i915_driver_open(struct drm_device *dev, struct drm_file *file);
-extern void i915_driver_lastclose(struct drm_device * dev);
-extern void i915_driver_preclose(struct drm_device *dev,
-				 struct drm_file *file);
-extern void i915_driver_postclose(struct drm_device *dev,
-				  struct drm_file *file);
 #ifdef CONFIG_COMPAT
 extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
 			      unsigned long arg);
@@ -3751,7 +3738,6 @@ extern void intel_init_pch_refclk(struct drm_device *dev);
 extern void intel_set_rps(struct drm_i915_private *dev_priv, u8 val);
 extern void intel_set_memory_cxsr(struct drm_i915_private *dev_priv,
 				  bool enable);
-extern void intel_detect_pch(struct drm_device *dev);
 
 extern bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv);
 int i915_reg_read_ioctl(struct drm_device *dev, void *data,
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 11/15] drm/i915: Remove user controllable DRM_ERROR for i915_getparam()

[Chris Wilson]

The GETPARAM ioctl writes to a user supplied address. If that address is
invalid, it is the user's error and not the driver's, so quietly report
EFAULT and don't blame ourselves with a DRM_ERROR.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index e2375361a34d..afa3e99fd48a 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -752,10 +752,8 @@ static int i915_getparam(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
-	if (copy_to_user(param->value, &value, sizeof(int))) {
-		DRM_ERROR("copy_to_user failed\n");
+	if (put_user(value, param->value))
 		return -EFAULT;
-	}
 
 	return 0;
 }
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 12/15] drm/i915: Remove user controllable DRM_ERROR for intel_get_pipe_from_crtc_id()

[Chris Wilson]

Don't emit a driver DRM_ERROR for a user passing in an invalid CRTC id,
simply report it is missing back to the user.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c3257177d527..c3b5dc8f5e80 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14633,11 +14633,8 @@ int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
 	struct intel_crtc *crtc;
 
 	drmmode_crtc = drm_crtc_find(dev, pipe_from_crtc_id->crtc_id);
-
-	if (!drmmode_crtc) {
-		DRM_ERROR("no such CRTC id\n");
+	if (!drmmode_crtc)
 		return -ENOENT;
-	}
 
 	crtc = to_intel_crtc(drmmode_crtc);
 	pipe_from_crtc_id->pipe = crtc->pipe;
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 13/15] drm/i915: Fix misleading driver debug message

[Chris Wilson]

From: Frank Binns <frank.binns@imgtec.com>

Stop claiming that UMS support is disabled when it's not actually
supported anymore.

Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1466763836-27772-1-git-send-email-frank.binns@imgtec.com
---
 drivers/gpu/drm/i915/i915_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index afa3e99fd48a..50d1a71aeddc 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -3465,7 +3465,7 @@ static int __init i915_init(void)
 
 	if (!(driver.driver_features & DRIVER_MODESET)) {
 		/* Silently fail loading to not upset userspace. */
-		DRM_DEBUG_DRIVER("KMS and UMS disabled.\n");
+		DRM_DEBUG_DRIVER("KMS disabled.\n");
 		return 0;
 	}
 
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 14/15] drm/i915: Split out the PCI driver interface to i915_pci.c

[Chris Wilson]

To reclaim a bit of space from i915_drv.c, we can move the routines that
just hook us into the PCI device tree into i915_pci.c

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/Makefile   |   1 +
 drivers/gpu/drm/i915/i915_drv.c | 444 +-------------------------------------
 drivers/gpu/drm/i915/i915_pci.c | 461 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 471 insertions(+), 435 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/i915_pci.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index c07cfb649f32..a3d2b789c9ec 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -10,6 +10,7 @@ subdir-ccflags-$(CONFIG_DRM_I915_WERROR) := -Werror
 i915-y := i915_drv.o \
 	  i915_irq.o \
 	  i915_params.o \
+	  i915_pci.o \
           i915_suspend.o \
 	  i915_sysfs.o \
 	  intel_csr.o \
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 50d1a71aeddc..7d011a686bc9 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -53,387 +53,6 @@
 
 static struct drm_driver driver;
 
-#define GEN_DEFAULT_PIPEOFFSETS \
-	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
-			  PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
-	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
-			   TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }, \
-	.palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET }
-
-#define GEN_CHV_PIPEOFFSETS \
-	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
-			  CHV_PIPE_C_OFFSET }, \
-	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
-			   CHV_TRANSCODER_C_OFFSET, }, \
-	.palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET, \
-			     CHV_PALETTE_C_OFFSET }
-
-#define CURSOR_OFFSETS \
-	.cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET }
-
-#define IVB_CURSOR_OFFSETS \
-	.cursor_offsets = { CURSOR_A_OFFSET, IVB_CURSOR_B_OFFSET, IVB_CURSOR_C_OFFSET }
-
-#define BDW_COLORS \
-	.color = { .degamma_lut_size = 512, .gamma_lut_size = 512 }
-#define CHV_COLORS \
-	.color = { .degamma_lut_size = 65, .gamma_lut_size = 257 }
-
-static const struct intel_device_info intel_i830_info = {
-	.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
-	.has_overlay = 1, .overlay_needs_physical = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_845g_info = {
-	.gen = 2, .num_pipes = 1,
-	.has_overlay = 1, .overlay_needs_physical = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_i85x_info = {
-	.gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
-	.cursor_needs_physical = 1,
-	.has_overlay = 1, .overlay_needs_physical = 1,
-	.has_fbc = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_i865g_info = {
-	.gen = 2, .num_pipes = 1,
-	.has_overlay = 1, .overlay_needs_physical = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_i915g_info = {
-	.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
-	.has_overlay = 1, .overlay_needs_physical = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-static const struct intel_device_info intel_i915gm_info = {
-	.gen = 3, .is_mobile = 1, .num_pipes = 2,
-	.cursor_needs_physical = 1,
-	.has_overlay = 1, .overlay_needs_physical = 1,
-	.supports_tv = 1,
-	.has_fbc = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-static const struct intel_device_info intel_i945g_info = {
-	.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
-	.has_overlay = 1, .overlay_needs_physical = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-static const struct intel_device_info intel_i945gm_info = {
-	.gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
-	.has_hotplug = 1, .cursor_needs_physical = 1,
-	.has_overlay = 1, .overlay_needs_physical = 1,
-	.supports_tv = 1,
-	.has_fbc = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_i965g_info = {
-	.gen = 4, .is_broadwater = 1, .num_pipes = 2,
-	.has_hotplug = 1,
-	.has_overlay = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_i965gm_info = {
-	.gen = 4, .is_crestline = 1, .num_pipes = 2,
-	.is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
-	.has_overlay = 1,
-	.supports_tv = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_g33_info = {
-	.gen = 3, .is_g33 = 1, .num_pipes = 2,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.has_overlay = 1,
-	.ring_mask = RENDER_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_g45_info = {
-	.gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
-	.has_pipe_cxsr = 1, .has_hotplug = 1,
-	.ring_mask = RENDER_RING | BSD_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_gm45_info = {
-	.gen = 4, .is_g4x = 1, .num_pipes = 2,
-	.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
-	.has_pipe_cxsr = 1, .has_hotplug = 1,
-	.supports_tv = 1,
-	.ring_mask = RENDER_RING | BSD_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_pineview_info = {
-	.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.has_overlay = 1,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_ironlake_d_info = {
-	.gen = 5, .num_pipes = 2,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.ring_mask = RENDER_RING | BSD_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_ironlake_m_info = {
-	.gen = 5, .is_mobile = 1, .num_pipes = 2,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.has_fbc = 1,
-	.ring_mask = RENDER_RING | BSD_RING,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_sandybridge_d_info = {
-	.gen = 6, .num_pipes = 2,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.has_fbc = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
-	.has_llc = 1,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-static const struct intel_device_info intel_sandybridge_m_info = {
-	.gen = 6, .is_mobile = 1, .num_pipes = 2,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.has_fbc = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
-	.has_llc = 1,
-	GEN_DEFAULT_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-};
-
-#define GEN7_FEATURES  \
-	.gen = 7, .num_pipes = 3, \
-	.need_gfx_hws = 1, .has_hotplug = 1, \
-	.has_fbc = 1, \
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
-	.has_llc = 1, \
-	GEN_DEFAULT_PIPEOFFSETS, \
-	IVB_CURSOR_OFFSETS
-
-static const struct intel_device_info intel_ivybridge_d_info = {
-	GEN7_FEATURES,
-	.is_ivybridge = 1,
-};
-
-static const struct intel_device_info intel_ivybridge_m_info = {
-	GEN7_FEATURES,
-	.is_ivybridge = 1,
-	.is_mobile = 1,
-};
-
-static const struct intel_device_info intel_ivybridge_q_info = {
-	GEN7_FEATURES,
-	.is_ivybridge = 1,
-	.num_pipes = 0, /* legal, last one wins */
-};
-
-#define VLV_FEATURES  \
-	.gen = 7, .num_pipes = 2, \
-	.need_gfx_hws = 1, .has_hotplug = 1, \
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
-	.display_mmio_offset = VLV_DISPLAY_BASE, \
-	GEN_DEFAULT_PIPEOFFSETS, \
-	CURSOR_OFFSETS
-
-static const struct intel_device_info intel_valleyview_m_info = {
-	VLV_FEATURES,
-	.is_valleyview = 1,
-	.is_mobile = 1,
-};
-
-static const struct intel_device_info intel_valleyview_d_info = {
-	VLV_FEATURES,
-	.is_valleyview = 1,
-};
-
-#define HSW_FEATURES  \
-	GEN7_FEATURES, \
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING, \
-	.has_ddi = 1, \
-	.has_fpga_dbg = 1
-
-static const struct intel_device_info intel_haswell_d_info = {
-	HSW_FEATURES,
-	.is_haswell = 1,
-};
-
-static const struct intel_device_info intel_haswell_m_info = {
-	HSW_FEATURES,
-	.is_haswell = 1,
-	.is_mobile = 1,
-};
-
-#define BDW_FEATURES \
-	HSW_FEATURES, \
-	BDW_COLORS
-
-static const struct intel_device_info intel_broadwell_d_info = {
-	BDW_FEATURES,
-	.gen = 8,
-	.is_broadwell = 1,
-};
-
-static const struct intel_device_info intel_broadwell_m_info = {
-	BDW_FEATURES,
-	.gen = 8, .is_mobile = 1,
-	.is_broadwell = 1,
-};
-
-static const struct intel_device_info intel_broadwell_gt3d_info = {
-	BDW_FEATURES,
-	.gen = 8,
-	.is_broadwell = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
-
-static const struct intel_device_info intel_broadwell_gt3m_info = {
-	BDW_FEATURES,
-	.gen = 8, .is_mobile = 1,
-	.is_broadwell = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
-
-static const struct intel_device_info intel_cherryview_info = {
-	.gen = 8, .num_pipes = 3,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
-	.is_cherryview = 1,
-	.display_mmio_offset = VLV_DISPLAY_BASE,
-	GEN_CHV_PIPEOFFSETS,
-	CURSOR_OFFSETS,
-	CHV_COLORS,
-};
-
-static const struct intel_device_info intel_skylake_info = {
-	BDW_FEATURES,
-	.is_skylake = 1,
-	.gen = 9,
-};
-
-static const struct intel_device_info intel_skylake_gt3_info = {
-	BDW_FEATURES,
-	.is_skylake = 1,
-	.gen = 9,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
-
-static const struct intel_device_info intel_broxton_info = {
-	.is_preliminary = 1,
-	.is_broxton = 1,
-	.gen = 9,
-	.need_gfx_hws = 1, .has_hotplug = 1,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
-	.num_pipes = 3,
-	.has_ddi = 1,
-	.has_fpga_dbg = 1,
-	.has_fbc = 1,
-	.has_pooled_eu = 0,
-	GEN_DEFAULT_PIPEOFFSETS,
-	IVB_CURSOR_OFFSETS,
-	BDW_COLORS,
-};
-
-static const struct intel_device_info intel_kabylake_info = {
-	BDW_FEATURES,
-	.is_kabylake = 1,
-	.gen = 9,
-};
-
-static const struct intel_device_info intel_kabylake_gt3_info = {
-	BDW_FEATURES,
-	.is_kabylake = 1,
-	.gen = 9,
-	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
-
-/*
- * Make sure any device matches here are from most specific to most
- * general.  For example, since the Quanta match is based on the subsystem
- * and subvendor IDs, we need it to come before the more general IVB
- * PCI ID matches, otherwise we'll use the wrong info struct above.
- */
-static const struct pci_device_id pciidlist[] = {
-	INTEL_I830_IDS(&intel_i830_info),
-	INTEL_I845G_IDS(&intel_845g_info),
-	INTEL_I85X_IDS(&intel_i85x_info),
-	INTEL_I865G_IDS(&intel_i865g_info),
-	INTEL_I915G_IDS(&intel_i915g_info),
-	INTEL_I915GM_IDS(&intel_i915gm_info),
-	INTEL_I945G_IDS(&intel_i945g_info),
-	INTEL_I945GM_IDS(&intel_i945gm_info),
-	INTEL_I965G_IDS(&intel_i965g_info),
-	INTEL_G33_IDS(&intel_g33_info),
-	INTEL_I965GM_IDS(&intel_i965gm_info),
-	INTEL_GM45_IDS(&intel_gm45_info),
-	INTEL_G45_IDS(&intel_g45_info),
-	INTEL_PINEVIEW_IDS(&intel_pineview_info),
-	INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
-	INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
-	INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
-	INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
-	INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
-	INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
-	INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
-	INTEL_HSW_D_IDS(&intel_haswell_d_info),
-	INTEL_HSW_M_IDS(&intel_haswell_m_info),
-	INTEL_VLV_M_IDS(&intel_valleyview_m_info),
-	INTEL_VLV_D_IDS(&intel_valleyview_d_info),
-	INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),
-	INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),
-	INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),
-	INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info),
-	INTEL_CHV_IDS(&intel_cherryview_info),
-	INTEL_SKL_GT1_IDS(&intel_skylake_info),
-	INTEL_SKL_GT2_IDS(&intel_skylake_info),
-	INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
-	INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
-	INTEL_BXT_IDS(&intel_broxton_info),
-	INTEL_KBL_GT1_IDS(&intel_kabylake_info),
-	INTEL_KBL_GT2_IDS(&intel_kabylake_info),
-	INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
-	INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
-	{0, 0, 0}
-};
-MODULE_DEVICE_TABLE(pci, pciidlist);
-
 static unsigned int i915_load_fail_count;
 
 bool __i915_inject_load_failure(const char *func, int line)
@@ -1968,8 +1587,7 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
  *   - allocate initial config memory
  *   - setup the DRM framebuffer with the allocated memory
  */
-static int i915_driver_load(struct pci_dev *pdev,
-			    const struct pci_device_id *ent)
+int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct drm_i915_private *dev_priv;
 	int ret;
@@ -2051,18 +1669,14 @@ out_free_priv:
 	return ret;
 }
 
-static int i915_driver_unload(struct drm_device *dev)
+void i915_driver_unload(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret;
 
 	intel_fbdev_fini(dev);
 
-	ret = i915_gem_suspend(dev);
-	if (ret) {
-		DRM_ERROR("failed to idle hardware: %d\n", ret);
-		return ret;
-	}
+	if (i915_gem_suspend(dev))
+		DRM_ERROR("failed to idle hardware; continuing to unload!\n");
 
 	intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
 
@@ -2110,8 +1724,6 @@ static int i915_driver_unload(struct drm_device *dev)
 	intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
 
 	i915_driver_cleanup_early(dev_priv);
-
-	return 0;
 }
 
 static int i915_driver_open(struct drm_device *dev, struct drm_file *file)
@@ -2614,40 +2226,6 @@ error:
 	return ret;
 }
 
-static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	struct intel_device_info *intel_info =
-		(struct intel_device_info *) ent->driver_data;
-
-	if (IS_PRELIMINARY_HW(intel_info) && !i915.preliminary_hw_support) {
-		DRM_INFO("This hardware requires preliminary hardware support.\n"
-			 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
-		return -ENODEV;
-	}
-
-	/* Only bind to function 0 of the device. Early generations
-	 * used function 1 as a placeholder for multi-head. This causes
-	 * us confusion instead, especially on the systems where both
-	 * functions have the same PCI-ID!
-	 */
-	if (PCI_FUNC(pdev->devfn))
-		return -ENODEV;
-
-	if (vga_switcheroo_client_probe_defer(pdev))
-		return -EPROBE_DEFER;
-
-	return i915_driver_load(pdev, ent);
-}
-
-static void
-i915_pci_remove(struct pci_dev *pdev)
-{
-	struct drm_device *dev = pci_get_drvdata(pdev);
-
-	i915_driver_unload(dev);
-	drm_dev_unref(dev);
-}
-
 static int i915_pm_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -3285,7 +2863,7 @@ static int intel_runtime_resume(struct device *device)
 	return ret;
 }
 
-static const struct dev_pm_ops i915_pm_ops = {
+const struct dev_pm_ops i915_pm_ops = {
 	/*
 	 * S0ix (via system suspend) and S3 event handlers [PMSG_SUSPEND,
 	 * PMSG_RESUME]
@@ -3441,16 +3019,10 @@ static struct drm_driver driver = {
 	.patchlevel = DRIVER_PATCHLEVEL,
 };
 
-static struct pci_driver i915_pci_driver = {
-	.name = DRIVER_NAME,
-	.id_table = pciidlist,
-	.probe = i915_pci_probe,
-	.remove = i915_pci_remove,
-	.driver.pm = &i915_pm_ops,
-};
-
 static int __init i915_init(void)
 {
+	extern struct pci_driver i915_pci_driver;
+
 	/*
 	 * Enable KMS by default, unless explicitly overriden by
 	 * either the i915.modeset prarameter or by the
@@ -3477,6 +3049,8 @@ static int __init i915_init(void)
 
 static void __exit i915_exit(void)
 {
+	extern struct pci_driver i915_pci_driver;
+
 	if (!(driver.driver_features & DRIVER_MODESET))
 		return; /* Never loaded a driver. */
 
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
new file mode 100644
index 000000000000..9aa07f38caea
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -0,0 +1,461 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include <linux/vgaarb.h>
+#include <linux/vga_switcheroo.h>
+
+#include "i915_drv.h"
+
+#define GEN_DEFAULT_PIPEOFFSETS \
+	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
+			  PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
+	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
+			   TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }, \
+	.palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET }
+
+#define GEN_CHV_PIPEOFFSETS \
+	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
+			  CHV_PIPE_C_OFFSET }, \
+	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
+			   CHV_TRANSCODER_C_OFFSET, }, \
+	.palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET, \
+			     CHV_PALETTE_C_OFFSET }
+
+#define CURSOR_OFFSETS \
+	.cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET }
+
+#define IVB_CURSOR_OFFSETS \
+	.cursor_offsets = { CURSOR_A_OFFSET, IVB_CURSOR_B_OFFSET, IVB_CURSOR_C_OFFSET }
+
+#define BDW_COLORS \
+	.color = { .degamma_lut_size = 512, .gamma_lut_size = 512 }
+#define CHV_COLORS \
+	.color = { .degamma_lut_size = 65, .gamma_lut_size = 257 }
+
+static const struct intel_device_info intel_i830_info = {
+	.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_845g_info = {
+	.gen = 2, .num_pipes = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_i85x_info = {
+	.gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
+	.cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.has_fbc = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_i865g_info = {
+	.gen = 2, .num_pipes = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_i915g_info = {
+	.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+static const struct intel_device_info intel_i915gm_info = {
+	.gen = 3, .is_mobile = 1, .num_pipes = 2,
+	.cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.supports_tv = 1,
+	.has_fbc = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+static const struct intel_device_info intel_i945g_info = {
+	.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+static const struct intel_device_info intel_i945gm_info = {
+	.gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
+	.has_hotplug = 1, .cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.supports_tv = 1,
+	.has_fbc = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_i965g_info = {
+	.gen = 4, .is_broadwater = 1, .num_pipes = 2,
+	.has_hotplug = 1,
+	.has_overlay = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_i965gm_info = {
+	.gen = 4, .is_crestline = 1, .num_pipes = 2,
+	.is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
+	.has_overlay = 1,
+	.supports_tv = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_g33_info = {
+	.gen = 3, .is_g33 = 1, .num_pipes = 2,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_overlay = 1,
+	.ring_mask = RENDER_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_g45_info = {
+	.gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
+	.has_pipe_cxsr = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_gm45_info = {
+	.gen = 4, .is_g4x = 1, .num_pipes = 2,
+	.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
+	.has_pipe_cxsr = 1, .has_hotplug = 1,
+	.supports_tv = 1,
+	.ring_mask = RENDER_RING | BSD_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_pineview_info = {
+	.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_overlay = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_ironlake_d_info = {
+	.gen = 5, .num_pipes = 2,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_ironlake_m_info = {
+	.gen = 5, .is_mobile = 1, .num_pipes = 2,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_fbc = 1,
+	.ring_mask = RENDER_RING | BSD_RING,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_sandybridge_d_info = {
+	.gen = 6, .num_pipes = 2,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_fbc = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
+	.has_llc = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_sandybridge_m_info = {
+	.gen = 6, .is_mobile = 1, .num_pipes = 2,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_fbc = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
+	.has_llc = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+};
+
+#define GEN7_FEATURES  \
+	.gen = 7, .num_pipes = 3, \
+	.need_gfx_hws = 1, .has_hotplug = 1, \
+	.has_fbc = 1, \
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
+	.has_llc = 1, \
+	GEN_DEFAULT_PIPEOFFSETS, \
+	IVB_CURSOR_OFFSETS
+
+static const struct intel_device_info intel_ivybridge_d_info = {
+	GEN7_FEATURES,
+	.is_ivybridge = 1,
+};
+
+static const struct intel_device_info intel_ivybridge_m_info = {
+	GEN7_FEATURES,
+	.is_ivybridge = 1,
+	.is_mobile = 1,
+};
+
+static const struct intel_device_info intel_ivybridge_q_info = {
+	GEN7_FEATURES,
+	.is_ivybridge = 1,
+	.num_pipes = 0, /* legal, last one wins */
+};
+
+#define VLV_FEATURES  \
+	.gen = 7, .num_pipes = 2, \
+	.need_gfx_hws = 1, .has_hotplug = 1, \
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
+	.display_mmio_offset = VLV_DISPLAY_BASE, \
+	GEN_DEFAULT_PIPEOFFSETS, \
+	CURSOR_OFFSETS
+
+static const struct intel_device_info intel_valleyview_m_info = {
+	VLV_FEATURES,
+	.is_valleyview = 1,
+	.is_mobile = 1,
+};
+
+static const struct intel_device_info intel_valleyview_d_info = {
+	VLV_FEATURES,
+	.is_valleyview = 1,
+};
+
+#define HSW_FEATURES  \
+	GEN7_FEATURES, \
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING, \
+	.has_ddi = 1, \
+	.has_fpga_dbg = 1
+
+static const struct intel_device_info intel_haswell_d_info = {
+	HSW_FEATURES,
+	.is_haswell = 1,
+};
+
+static const struct intel_device_info intel_haswell_m_info = {
+	HSW_FEATURES,
+	.is_haswell = 1,
+	.is_mobile = 1,
+};
+
+#define BDW_FEATURES \
+	HSW_FEATURES, \
+	BDW_COLORS
+
+static const struct intel_device_info intel_broadwell_d_info = {
+	BDW_FEATURES,
+	.gen = 8,
+	.is_broadwell = 1,
+};
+
+static const struct intel_device_info intel_broadwell_m_info = {
+	BDW_FEATURES,
+	.gen = 8, .is_mobile = 1,
+	.is_broadwell = 1,
+};
+
+static const struct intel_device_info intel_broadwell_gt3d_info = {
+	BDW_FEATURES,
+	.gen = 8,
+	.is_broadwell = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+static const struct intel_device_info intel_broadwell_gt3m_info = {
+	BDW_FEATURES,
+	.gen = 8, .is_mobile = 1,
+	.is_broadwell = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+static const struct intel_device_info intel_cherryview_info = {
+	.gen = 8, .num_pipes = 3,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.is_cherryview = 1,
+	.display_mmio_offset = VLV_DISPLAY_BASE,
+	GEN_CHV_PIPEOFFSETS,
+	CURSOR_OFFSETS,
+	CHV_COLORS,
+};
+
+static const struct intel_device_info intel_skylake_info = {
+	BDW_FEATURES,
+	.is_skylake = 1,
+	.gen = 9,
+};
+
+static const struct intel_device_info intel_skylake_gt3_info = {
+	BDW_FEATURES,
+	.is_skylake = 1,
+	.gen = 9,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+static const struct intel_device_info intel_broxton_info = {
+	.is_preliminary = 1,
+	.is_broxton = 1,
+	.gen = 9,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.num_pipes = 3,
+	.has_ddi = 1,
+	.has_fpga_dbg = 1,
+	.has_fbc = 1,
+	.has_pooled_eu = 0,
+	GEN_DEFAULT_PIPEOFFSETS,
+	IVB_CURSOR_OFFSETS,
+	BDW_COLORS,
+};
+
+static const struct intel_device_info intel_kabylake_info = {
+	BDW_FEATURES,
+	.is_kabylake = 1,
+	.gen = 9,
+};
+
+static const struct intel_device_info intel_kabylake_gt3_info = {
+	BDW_FEATURES,
+	.is_kabylake = 1,
+	.gen = 9,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+/*
+ * Make sure any device matches here are from most specific to most
+ * general.  For example, since the Quanta match is based on the subsystem
+ * and subvendor IDs, we need it to come before the more general IVB
+ * PCI ID matches, otherwise we'll use the wrong info struct above.
+ */
+static const struct pci_device_id pciidlist[] = {
+	INTEL_I830_IDS(&intel_i830_info),
+	INTEL_I845G_IDS(&intel_845g_info),
+	INTEL_I85X_IDS(&intel_i85x_info),
+	INTEL_I865G_IDS(&intel_i865g_info),
+	INTEL_I915G_IDS(&intel_i915g_info),
+	INTEL_I915GM_IDS(&intel_i915gm_info),
+	INTEL_I945G_IDS(&intel_i945g_info),
+	INTEL_I945GM_IDS(&intel_i945gm_info),
+	INTEL_I965G_IDS(&intel_i965g_info),
+	INTEL_G33_IDS(&intel_g33_info),
+	INTEL_I965GM_IDS(&intel_i965gm_info),
+	INTEL_GM45_IDS(&intel_gm45_info),
+	INTEL_G45_IDS(&intel_g45_info),
+	INTEL_PINEVIEW_IDS(&intel_pineview_info),
+	INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
+	INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
+	INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
+	INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
+	INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
+	INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
+	INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
+	INTEL_HSW_D_IDS(&intel_haswell_d_info),
+	INTEL_HSW_M_IDS(&intel_haswell_m_info),
+	INTEL_VLV_M_IDS(&intel_valleyview_m_info),
+	INTEL_VLV_D_IDS(&intel_valleyview_d_info),
+	INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),
+	INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),
+	INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),
+	INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info),
+	INTEL_CHV_IDS(&intel_cherryview_info),
+	INTEL_SKL_GT1_IDS(&intel_skylake_info),
+	INTEL_SKL_GT2_IDS(&intel_skylake_info),
+	INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
+	INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
+	INTEL_BXT_IDS(&intel_broxton_info),
+	INTEL_KBL_GT1_IDS(&intel_kabylake_info),
+	INTEL_KBL_GT2_IDS(&intel_kabylake_info),
+	INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
+	INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
+	{0, 0, 0}
+};
+MODULE_DEVICE_TABLE(pci, pciidlist);
+
+extern int i915_driver_load(struct pci_dev *pdev,
+			    const struct pci_device_id *ent);
+
+static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct intel_device_info *intel_info =
+		(struct intel_device_info *) ent->driver_data;
+
+	if (IS_PRELIMINARY_HW(intel_info) && !i915.preliminary_hw_support) {
+		DRM_INFO("This hardware requires preliminary hardware support.\n"
+			 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
+		return -ENODEV;
+	}
+
+	/* Only bind to function 0 of the device. Early generations
+	 * used function 1 as a placeholder for multi-head. This causes
+	 * us confusion instead, especially on the systems where both
+	 * functions have the same PCI-ID!
+	 */
+	if (PCI_FUNC(pdev->devfn))
+		return -ENODEV;
+
+	/*
+	 * apple-gmux is needed on dual GPU MacBook Pro
+	 * to probe the panel if we're the inactive GPU.
+	 */
+	if (vga_switcheroo_client_probe_defer(pdev))
+		return -EPROBE_DEFER;
+
+	return i915_driver_load(pdev, ent);
+}
+
+extern void i915_driver_unload(struct drm_device *dev);
+
+static void i915_pci_remove(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+
+	i915_driver_unload(dev);
+	drm_dev_unref(dev);
+}
+
+extern const struct dev_pm_ops i915_pm_ops;
+
+struct pci_driver i915_pci_driver = {
+	.name = DRIVER_NAME,
+	.id_table = pciidlist,
+	.probe = i915_pci_probe,
+	.remove = i915_pci_remove,
+	.driver.pm = &i915_pm_ops,
+};
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[CI 15/15] drm/i915: Move module init/exit to i915_pci.c

[Chris Wilson]

The module init/exit routines are a wrapper around the PCI device
init/exit, so move them across.

Note that in order to avoid exporting the driver struct, instead of
manipulating driver.features inside i915_init we instead opt to simply
exit if i915.modeset is disabled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c | 51 +++--------------------------------------
 drivers/gpu/drm/i915/i915_pci.c | 45 +++++++++++++++++++++++++++++++++++-
 2 files changed, 47 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 7d011a686bc9..b98afbd33235 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -28,7 +28,6 @@
  */
 
 #include <linux/acpi.h>
-#include <linux/console.h>
 #include <linux/device.h>
 #include <linux/oom.h>
 #include <linux/module.h>
@@ -1592,6 +1591,9 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct drm_i915_private *dev_priv;
 	int ret;
 
+	if (i915.nuclear_pageflip)
+		driver.driver_features |= DRIVER_ATOMIC;
+
 	ret = -ENOMEM;
 	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
 	if (dev_priv)
@@ -3018,50 +3020,3 @@ static struct drm_driver driver = {
 	.minor = DRIVER_MINOR,
 	.patchlevel = DRIVER_PATCHLEVEL,
 };
-
-static int __init i915_init(void)
-{
-	extern struct pci_driver i915_pci_driver;
-
-	/*
-	 * Enable KMS by default, unless explicitly overriden by
-	 * either the i915.modeset prarameter or by the
-	 * vga_text_mode_force boot option.
-	 */
-
-	if (i915.modeset == 0)
-		driver.driver_features &= ~DRIVER_MODESET;
-
-	if (vgacon_text_force() && i915.modeset == -1)
-		driver.driver_features &= ~DRIVER_MODESET;
-
-	if (!(driver.driver_features & DRIVER_MODESET)) {
-		/* Silently fail loading to not upset userspace. */
-		DRM_DEBUG_DRIVER("KMS disabled.\n");
-		return 0;
-	}
-
-	if (i915.nuclear_pageflip)
-		driver.driver_features |= DRIVER_ATOMIC;
-
-	return drm_pci_init(&driver, &i915_pci_driver);
-}
-
-static void __exit i915_exit(void)
-{
-	extern struct pci_driver i915_pci_driver;
-
-	if (!(driver.driver_features & DRIVER_MODESET))
-		return; /* Never loaded a driver. */
-
-	drm_pci_exit(&driver, &i915_pci_driver);
-}
-
-module_init(i915_init);
-module_exit(i915_exit);
-
-MODULE_AUTHOR("Tungsten Graphics, Inc.");
-MODULE_AUTHOR("Intel Corporation");
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL and additional rights");
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 9aa07f38caea..a7f8f4fb7e8d 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -22,6 +22,7 @@
  *
  */
 
+#include <linux/console.h>
 #include <linux/vgaarb.h>
 #include <linux/vga_switcheroo.h>
 
@@ -452,10 +453,52 @@ static void i915_pci_remove(struct pci_dev *pdev)
 
 extern const struct dev_pm_ops i915_pm_ops;
 
-struct pci_driver i915_pci_driver = {
+static struct pci_driver i915_pci_driver = {
 	.name = DRIVER_NAME,
 	.id_table = pciidlist,
 	.probe = i915_pci_probe,
 	.remove = i915_pci_remove,
 	.driver.pm = &i915_pm_ops,
 };
+
+static int __init i915_init(void)
+{
+	bool use_kms = true;
+
+	/*
+	 * Enable KMS by default, unless explicitly overriden by
+	 * either the i915.modeset prarameter or by the
+	 * vga_text_mode_force boot option.
+	 */
+
+	if (i915.modeset == 0)
+		use_kms = false;
+
+	if (vgacon_text_force() && i915.modeset == -1)
+		use_kms = false;
+
+	if (!use_kms) {
+		/* Silently fail loading to not upset userspace. */
+		DRM_DEBUG_DRIVER("KMS disabled.\n");
+		return 0;
+	}
+
+	return pci_register_driver(&i915_pci_driver);
+}
+
+static void __exit i915_exit(void)
+{
+	if (!i915_pci_driver.driver.owner)
+		return;
+
+	pci_unregister_driver(&i915_pci_driver);
+}
+
+module_init(i915_init);
+module_exit(i915_exit);
+
+MODULE_AUTHOR("Tungsten Graphics, Inc.");
+MODULE_AUTHOR("Intel Corporation");
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL and additional rights");
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Ro.CI.BAT: success for series starting with [CI,01/15] drm/i915: Move panel's backlight setup next to panel init

[Patchwork]

== Series Details ==

Series: series starting with [CI,01/15] drm/i915: Move panel's backlight setup next to panel init
URL   : https://patchwork.freedesktop.org/series/9138/
State : success

== Summary ==

Series 9138v1 Series without cover letter
http://patchwork.freedesktop.org/api/1.0/series/9138/revisions/1/mbox


fi-skl-i5-6260u  total:228  pass:202  dwarn:0   dfail:0   fail:1   skip:25 
fi-snb-i7-2600   total:228  pass:174  dwarn:0   dfail:0   fail:1   skip:53 
fi-kbl-qkkr failed to connect after reboot
fi-skl-i7-6700k failed to connect after reboot
ro-bdw-i7-5557U failed to connect after reboot

Results at /archive/results/CI_IGT_test/RO_Patchwork_1298/

8660f44 drm-intel-nightly: 2016y-06m-24d-11h-09m-19s UTC integration manifest
4c79ca9 drm/i915: Move module init/exit to i915_pci.c
43cbee2 drm/i915: Split out the PCI driver interface to i915_pci.c
94ca81f drm/i915: Fix misleading driver debug message
b50c0ac drm/i915: Remove user controllable DRM_ERROR for intel_get_pipe_from_crtc_id()
365fd4e drm/i915: Remove user controllable DRM_ERROR for i915_getparam()
f97bd5a drm/i915: Merge i915_dma.c into i915_drv.c
93c488f drm/i915: Start exploiting drm_device subclassing
67f52a2 drm/i915: Remove redundant drm_connector_register_all()
95cd9aa drm/i915: Demidlayer driver unloading
4ebef46 drm/i915: Demidlayer driver loading
4b6a95a drm/i915: Register debugfs interface last
041c0da drm/i915: Move connector registration to driver registration
1c43983 drm/i915: Move backlight registration to connector registration
2aea7c0 drm/i915: Move registration actions to connector->late_register
a2fc6af drm/i915: Move panel's backlight setup next to panel init

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: ✓ Ro.CI.BAT: success for series starting with [CI,01/15] drm/i915: Move panel's backlight setup next to panel init

[Chris Wilson]

On Fri, Jun 24, 2016 at 01:33:34PM -0000, Patchwork wrote:
> == Series Details ==
> 
> Series: series starting with [CI,01/15] drm/i915: Move panel's backlight setup next to panel init
> URL   : https://patchwork.freedesktop.org/series/9138/
> State : success
> 
> == Summary ==
> 
> Series 9138v1 Series without cover letter
> http://patchwork.freedesktop.org/api/1.0/series/9138/revisions/1/mbox
> 
> 
> fi-skl-i5-6260u  total:228  pass:202  dwarn:0   dfail:0   fail:1   skip:25 
> fi-snb-i7-2600   total:228  pass:174  dwarn:0   dfail:0   fail:1   skip:53 
> fi-kbl-qkkr failed to connect after reboot
> fi-skl-i7-6700k failed to connect after reboot
> ro-bdw-i7-5557U failed to connect after reboot

Eek. This series has been bounced through CI and trybot quite frequently
over the last month, so I'm confident that it shouldn't introduce any
new issues, e.g. https://patchwork.freedesktop.org/series/9057/
yesterday.
-Chris

-- 
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx