* [PATCH 3/3] ath10k: add testmode support for 10.4 firmware
@ 2016-06-27 8:51 ` c_traja
0 siblings, 0 replies; 2+ messages in thread
From: c_traja @ 2016-06-27 8:51 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Tamizh chelvam
From: Tamizh chelvam <c_traja@qti.qualcomm.com>
This patch adds testmode support for QCA99X0 chipsets which uses
10.4 firmware and added code swap support for UTF binary.
Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/testmode.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/testmode.c b/drivers/net/wireless/ath/ath10k/testmode.c
index 120f423..2c10c0e 100644
--- a/drivers/net/wireless/ath/ath10k/testmode.c
+++ b/drivers/net/wireless/ath/ath10k/testmode.c
@@ -23,6 +23,7 @@
#include "wmi.h"
#include "hif.h"
#include "hw.h"
+#include "core.h"
#include "testmode_i.h"
@@ -240,6 +241,18 @@ static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
goto err;
}
+ if (ar->testmode.utf_mode_fw.fw_file.codeswap_data &&
+ ar->testmode.utf_mode_fw.fw_file.codeswap_len) {
+ ret = ath10k_swap_code_seg_init(ar,
+ &ar->testmode.utf_mode_fw.fw_file);
+ if (ret) {
+ ath10k_warn(ar,
+ "failed to init utf code swap segment: %d\n",
+ ret);
+ goto err_release_utf_mode_fw;
+ }
+ }
+
spin_lock_bh(&ar->data_lock);
ar->testmode.utf_monitor = true;
spin_unlock_bh(&ar->data_lock);
@@ -279,6 +292,11 @@ err_power_down:
ath10k_hif_power_down(ar);
err_release_utf_mode_fw:
+ if (ar->testmode.utf_mode_fw.fw_file.codeswap_data &&
+ ar->testmode.utf_mode_fw.fw_file.codeswap_len)
+ ath10k_swap_code_seg_release(ar,
+ &ar->testmode.utf_mode_fw.fw_file);
+
release_firmware(ar->testmode.utf_mode_fw.fw_file.firmware);
ar->testmode.utf_mode_fw.fw_file.firmware = NULL;
@@ -301,6 +319,11 @@ static void __ath10k_tm_cmd_utf_stop(struct ath10k *ar)
spin_unlock_bh(&ar->data_lock);
+ if (ar->testmode.utf_mode_fw.fw_file.codeswap_data &&
+ ar->testmode.utf_mode_fw.fw_file.codeswap_len)
+ ath10k_swap_code_seg_release(ar,
+ &ar->testmode.utf_mode_fw.fw_file);
+
release_firmware(ar->testmode.utf_mode_fw.fw_file.firmware);
ar->testmode.utf_mode_fw.fw_file.firmware = NULL;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 3/3] ath10k: add testmode support for 10.4 firmware
@ 2016-06-27 8:51 ` c_traja
0 siblings, 0 replies; 2+ messages in thread
From: c_traja @ 2016-06-27 8:51 UTC (permalink / raw)
To: ath10k; +Cc: Tamizh chelvam, linux-wireless
From: Tamizh chelvam <c_traja@qti.qualcomm.com>
This patch adds testmode support for QCA99X0 chipsets which uses
10.4 firmware and added code swap support for UTF binary.
Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/testmode.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/testmode.c b/drivers/net/wireless/ath/ath10k/testmode.c
index 120f423..2c10c0e 100644
--- a/drivers/net/wireless/ath/ath10k/testmode.c
+++ b/drivers/net/wireless/ath/ath10k/testmode.c
@@ -23,6 +23,7 @@
#include "wmi.h"
#include "hif.h"
#include "hw.h"
+#include "core.h"
#include "testmode_i.h"
@@ -240,6 +241,18 @@ static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
goto err;
}
+ if (ar->testmode.utf_mode_fw.fw_file.codeswap_data &&
+ ar->testmode.utf_mode_fw.fw_file.codeswap_len) {
+ ret = ath10k_swap_code_seg_init(ar,
+ &ar->testmode.utf_mode_fw.fw_file);
+ if (ret) {
+ ath10k_warn(ar,
+ "failed to init utf code swap segment: %d\n",
+ ret);
+ goto err_release_utf_mode_fw;
+ }
+ }
+
spin_lock_bh(&ar->data_lock);
ar->testmode.utf_monitor = true;
spin_unlock_bh(&ar->data_lock);
@@ -279,6 +292,11 @@ err_power_down:
ath10k_hif_power_down(ar);
err_release_utf_mode_fw:
+ if (ar->testmode.utf_mode_fw.fw_file.codeswap_data &&
+ ar->testmode.utf_mode_fw.fw_file.codeswap_len)
+ ath10k_swap_code_seg_release(ar,
+ &ar->testmode.utf_mode_fw.fw_file);
+
release_firmware(ar->testmode.utf_mode_fw.fw_file.firmware);
ar->testmode.utf_mode_fw.fw_file.firmware = NULL;
@@ -301,6 +319,11 @@ static void __ath10k_tm_cmd_utf_stop(struct ath10k *ar)
spin_unlock_bh(&ar->data_lock);
+ if (ar->testmode.utf_mode_fw.fw_file.codeswap_data &&
+ ar->testmode.utf_mode_fw.fw_file.codeswap_len)
+ ath10k_swap_code_seg_release(ar,
+ &ar->testmode.utf_mode_fw.fw_file);
+
release_firmware(ar->testmode.utf_mode_fw.fw_file.firmware);
ar->testmode.utf_mode_fw.fw_file.firmware = NULL;
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-06-27 8:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-27 8:51 [PATCH 3/3] ath10k: add testmode support for 10.4 firmware c_traja
2016-06-27 8:51 ` c_traja
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.