From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> To: sparclinux@vger.kernel.org, "David S. Miller" <davem@davemloft.net> Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com Subject: [PATCH] sparc64: sparc64_defconfig: convert to use libata PATA drivers Date: Mon, 27 Jun 2016 14:23:52 +0200 [thread overview] Message-ID: <1467030232-10027-1-git-send-email-b.zolnierkie@samsung.com> (raw) IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts sparc64_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> --- Build tested only. If you have affected hardware please test. Thank you. arch/sparc/configs/sparc64_defconfig | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index e4bbc76..41609ad 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -68,19 +68,17 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_WCACHE=y CONFIG_ATA_OVER_ETH=m CONFIG_SUNVDC=m -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_ALI15X3=y CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y +CONFIG_ATA=y +CONFIG_PATA_ALI=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> To: sparclinux@vger.kernel.org, "David S. Miller" <davem@davemloft.net> Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com Subject: [PATCH] sparc64: sparc64_defconfig: convert to use libata PATA drivers Date: Mon, 27 Jun 2016 12:23:52 +0000 [thread overview] Message-ID: <1467030232-10027-1-git-send-email-b.zolnierkie@samsung.com> (raw) IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts sparc64_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> --- Build tested only. If you have affected hardware please test. Thank you. arch/sparc/configs/sparc64_defconfig | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index e4bbc76..41609ad 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -68,19 +68,17 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_WCACHE=y CONFIG_ATA_OVER_ETH=m CONFIG_SUNVDC=m -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_ALI15X3=y CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y +CONFIG_ATA=y +CONFIG_PATA_ALI=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m -- 1.9.1
next reply other threads:[~2016-06-27 12:24 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-27 12:23 Bartlomiej Zolnierkiewicz [this message] 2016-06-27 12:23 ` [PATCH] sparc64: sparc64_defconfig: convert to use libata PATA drivers Bartlomiej Zolnierkiewicz 2016-06-27 16:38 ` alexmcwhirter 2016-06-27 16:38 ` [PATCH] sparc64: sparc64_defconfig: conve =?UTF-8?Q?rt=20to=20use=20libata alexmcwhirter 2016-06-27 23:18 ` [PATCH] sparc64: sparc64_defconfig: convert to use libata PATA drivers Julian Calaby 2016-06-27 23:18 ` Julian Calaby 2016-06-28 20:57 ` Mark Cave-Ayland 2016-06-28 20:57 ` Mark Cave-Ayland 2016-06-28 10:27 ` Meelis Roos 2016-06-28 10:37 ` Julian Calaby
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1467030232-10027-1-git-send-email-b.zolnierkie@samsung.com \ --to=b.zolnierkie@samsung.com \ --cc=davem@davemloft.net \ --cc=linux-ide@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=sparclinux@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.