From: Yoshinori Sato <ysato@users.sourceforge.jp> To: devicetree@vger.kernel.org, linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Subject: [PATCH v4 14/22] sh: SH7751 core dtsi Date: Wed, 29 Jun 2016 13:40:59 +0000 [thread overview] Message-ID: <1467207667-15768-15-git-send-email-ysato@users.sourceforge.jp> (raw) In-Reply-To: <1467207667-15768-1-git-send-email-ysato@users.sourceforge.jp> SH7751 core and internal peripheral define. Changes v4 - remove unneeded #address-cells and #size-cells - add missing dt-binding link Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> --- arch/sh/boot/dts/include/dt-bindings | 1 + arch/sh/boot/dts/sh7751.dtsi | 83 ++++++++++++++++++++++ include/dt-bindings/clock/renesas-sh7750.h | 26 +++++++ include/dt-bindings/interrupt-controller/sh_intc.h | 2 + 4 files changed, 112 insertions(+) create mode 120000 arch/sh/boot/dts/include/dt-bindings create mode 100644 arch/sh/boot/dts/sh7751.dtsi create mode 100644 include/dt-bindings/clock/renesas-sh7750.h create mode 100644 include/dt-bindings/interrupt-controller/sh_intc.h diff --git a/arch/sh/boot/dts/include/dt-bindings b/arch/sh/boot/dts/include/dt-bindings new file mode 120000 index 0000000..08c00e4 --- /dev/null +++ b/arch/sh/boot/dts/include/dt-bindings @@ -0,0 +1 @@ +../../../../../include/dt-bindings \ No newline at end of file diff --git a/arch/sh/boot/dts/sh7751.dtsi b/arch/sh/boot/dts/sh7751.dtsi new file mode 100644 index 0000000..79a2ee7 --- /dev/null +++ b/arch/sh/boot/dts/sh7751.dtsi @@ -0,0 +1,83 @@ +/* + * Device Tree Source for the SH7751 + * + * Copyright (C) 2016 Yoshinori Sato + */ + +#include <dt-bindings/interrupt-controller/sh_intc.h> +#include <dt-bindings/clock/renesas-sh7750.h> + +/ { + oclk: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + cpg: cpg@ffc00000 { + compatible = "renesas,sh7750-cpg"; + clocks = <&oclk>; + #clock-cells = <1>; + renesas,mult = <12>; + reg = <0xffc00000 32>, <0xfe0a0000 16>; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "renesas,sh4", "renesas,sh"; + clock-frequency = <266666666>; + }; + }; + shintc: interrupt-controller@ffd00000 { + compatible = "renesas,sh7751-intc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xffd00000 14>, <0xfe080000 128>; + + }; + sci0: serial@ffe00000 { + compatible = "renesas,sci"; + reg = <0xffe00000 0x20>; + interrupts = <evt2irq(0x4e0) 0>, + <evt2irq(0x500) 0>, + <evt2irq(0x540) 0>, + <evt2irq(0x520) 0>; + clocks = <&cpg SH7750_CLK_SCI>; + clock-names = "fck"; + status = "disabled"; + }; + sci1: serial@ffe80000 { + compatible = "renesas,scif"; + reg = <0xffe80000 0x100>; + interrupts = <evt2irq(0x700) 0>, + <evt2irq(0x720) 0>, + <evt2irq(0x760) 0>, + <evt2irq(0x740) 0>; + clocks = <&cpg SH7750_CLK_SCIF>; + clock-names = "fck"; + status = "disabled"; + }; + tmu: timer@ffd80000 { + compatible = "renesas,tmu"; + reg = <0xffd80000 12>; + interrupts = <evt2irq(0x400) 0>, + <evt2irq(0x420) 0>, + <evt2irq(0x440) 0>; + clocks = <&cpg SH7750_CLK_TMU0>; + clock-names = "fck"; + renesas,channels-mask = <0x03>; + }; + pci: pci-controller@fe200000 { + compatible = "renesas,sh7751-pci"; + device_type = "pci"; + bus-range = <0 0>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>, + <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>; + reg = <0xfe200000 0x0400>, <0xff800000 0x0030>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x1800 0 7>; + status = "disabled"; + }; +}; \ No newline at end of file diff --git a/include/dt-bindings/clock/renesas-sh7750.h b/include/dt-bindings/clock/renesas-sh7750.h new file mode 100644 index 0000000..546c0b1 --- /dev/null +++ b/include/dt-bindings/clock/renesas-sh7750.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2016 Yoshinori Sato + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__ +#define __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__ + +#define SH7750_CLK_SCI 0 +#define SH7750_CLK_RTC 1 +#define SH7750_CLK_TMU0 2 +#define SH7750_CLK_TMU1 3 +#define SH7750_CLK_TMU2 4 +#define SH7750_CLK_SCIF 5 +#define SH7750_CLK_DMAC 6 +#define SH7750_CLK_UBC 7 +#define SH7750_CLK_SQ 8 +#define SH7750_CLK_INTC 9 +#define SH7750_CLK_TMU3 10 +#define SH7750_CLK_TMU4 11 +#define SH7750_CLK_PCIC 12 + +#endif /* __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/interrupt-controller/sh_intc.h b/include/dt-bindings/interrupt-controller/sh_intc.h new file mode 100644 index 0000000..8c9dcdc --- /dev/null +++ b/include/dt-bindings/interrupt-controller/sh_intc.h @@ -0,0 +1,2 @@ +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) -- 2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: Yoshinori Sato <ysato@users.sourceforge.jp> To: devicetree@vger.kernel.org, linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Subject: [PATCH v4 14/22] sh: SH7751 core dtsi Date: Wed, 29 Jun 2016 22:40:59 +0900 [thread overview] Message-ID: <1467207667-15768-15-git-send-email-ysato@users.sourceforge.jp> (raw) In-Reply-To: <1467207667-15768-1-git-send-email-ysato@users.sourceforge.jp> SH7751 core and internal peripheral define. Changes v4 - remove unneeded #address-cells and #size-cells - add missing dt-binding link Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> --- arch/sh/boot/dts/include/dt-bindings | 1 + arch/sh/boot/dts/sh7751.dtsi | 83 ++++++++++++++++++++++ include/dt-bindings/clock/renesas-sh7750.h | 26 +++++++ include/dt-bindings/interrupt-controller/sh_intc.h | 2 + 4 files changed, 112 insertions(+) create mode 120000 arch/sh/boot/dts/include/dt-bindings create mode 100644 arch/sh/boot/dts/sh7751.dtsi create mode 100644 include/dt-bindings/clock/renesas-sh7750.h create mode 100644 include/dt-bindings/interrupt-controller/sh_intc.h diff --git a/arch/sh/boot/dts/include/dt-bindings b/arch/sh/boot/dts/include/dt-bindings new file mode 120000 index 0000000..08c00e4 --- /dev/null +++ b/arch/sh/boot/dts/include/dt-bindings @@ -0,0 +1 @@ +../../../../../include/dt-bindings \ No newline at end of file diff --git a/arch/sh/boot/dts/sh7751.dtsi b/arch/sh/boot/dts/sh7751.dtsi new file mode 100644 index 0000000..79a2ee7 --- /dev/null +++ b/arch/sh/boot/dts/sh7751.dtsi @@ -0,0 +1,83 @@ +/* + * Device Tree Source for the SH7751 + * + * Copyright (C) 2016 Yoshinori Sato + */ + +#include <dt-bindings/interrupt-controller/sh_intc.h> +#include <dt-bindings/clock/renesas-sh7750.h> + +/ { + oclk: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + cpg: cpg@ffc00000 { + compatible = "renesas,sh7750-cpg"; + clocks = <&oclk>; + #clock-cells = <1>; + renesas,mult = <12>; + reg = <0xffc00000 32>, <0xfe0a0000 16>; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "renesas,sh4", "renesas,sh"; + clock-frequency = <266666666>; + }; + }; + shintc: interrupt-controller@ffd00000 { + compatible = "renesas,sh7751-intc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xffd00000 14>, <0xfe080000 128>; + + }; + sci0: serial@ffe00000 { + compatible = "renesas,sci"; + reg = <0xffe00000 0x20>; + interrupts = <evt2irq(0x4e0) 0>, + <evt2irq(0x500) 0>, + <evt2irq(0x540) 0>, + <evt2irq(0x520) 0>; + clocks = <&cpg SH7750_CLK_SCI>; + clock-names = "fck"; + status = "disabled"; + }; + sci1: serial@ffe80000 { + compatible = "renesas,scif"; + reg = <0xffe80000 0x100>; + interrupts = <evt2irq(0x700) 0>, + <evt2irq(0x720) 0>, + <evt2irq(0x760) 0>, + <evt2irq(0x740) 0>; + clocks = <&cpg SH7750_CLK_SCIF>; + clock-names = "fck"; + status = "disabled"; + }; + tmu: timer@ffd80000 { + compatible = "renesas,tmu"; + reg = <0xffd80000 12>; + interrupts = <evt2irq(0x400) 0>, + <evt2irq(0x420) 0>, + <evt2irq(0x440) 0>; + clocks = <&cpg SH7750_CLK_TMU0>; + clock-names = "fck"; + renesas,channels-mask = <0x03>; + }; + pci: pci-controller@fe200000 { + compatible = "renesas,sh7751-pci"; + device_type = "pci"; + bus-range = <0 0>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>, + <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>; + reg = <0xfe200000 0x0400>, <0xff800000 0x0030>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x1800 0 7>; + status = "disabled"; + }; +}; \ No newline at end of file diff --git a/include/dt-bindings/clock/renesas-sh7750.h b/include/dt-bindings/clock/renesas-sh7750.h new file mode 100644 index 0000000..546c0b1 --- /dev/null +++ b/include/dt-bindings/clock/renesas-sh7750.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2016 Yoshinori Sato + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__ +#define __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__ + +#define SH7750_CLK_SCI 0 +#define SH7750_CLK_RTC 1 +#define SH7750_CLK_TMU0 2 +#define SH7750_CLK_TMU1 3 +#define SH7750_CLK_TMU2 4 +#define SH7750_CLK_SCIF 5 +#define SH7750_CLK_DMAC 6 +#define SH7750_CLK_UBC 7 +#define SH7750_CLK_SQ 8 +#define SH7750_CLK_INTC 9 +#define SH7750_CLK_TMU3 10 +#define SH7750_CLK_TMU4 11 +#define SH7750_CLK_PCIC 12 + +#endif /* __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/interrupt-controller/sh_intc.h b/include/dt-bindings/interrupt-controller/sh_intc.h new file mode 100644 index 0000000..8c9dcdc --- /dev/null +++ b/include/dt-bindings/interrupt-controller/sh_intc.h @@ -0,0 +1,2 @@ +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) -- 2.7.0
next prev parent reply other threads:[~2016-06-29 13:40 UTC|newest] Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-29 13:40 [PATCH v4 00/22] sh: LANDISK and R2Dplus convert to device tree Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 01/22] sh: Add sh-specific early_init_dt_reserve_memory_arch Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 02/22] sh: More early unflatten device tree Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 03/22] sh: set preset_lpj Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 04/22] sh: Use P1SEGADDR Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 05/22] sh: command line passing chosen/bootargs in devicetree Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 06/22] sh: FDT address save before bank change Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 07/22] sh: Passing FDT address on zImage Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 08/22] sh: Disable board specific code on device tree mode Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 09/22] sh: Use GENERIC_IOMAP " Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 10/22] sh: Add board specific initialize of of-generic Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 11/22] sh: SH7750/51 CPG Driver Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` [PATCH v4 12/22] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 14:57 ` Arnd Bergmann 2016-06-29 14:57 ` Arnd Bergmann 2016-06-30 14:52 ` Yoshinori Sato 2016-06-30 14:52 ` Yoshinori Sato 2016-07-01 1:43 ` Rob Herring 2016-07-01 1:43 ` Rob Herring 2016-06-29 13:40 ` [PATCH v4 13/22] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato 2016-06-29 13:40 ` Yoshinori Sato [this message] 2016-06-29 13:40 ` [PATCH v4 14/22] sh: SH7751 core dtsi Yoshinori Sato 2016-07-01 8:57 ` Geert Uytterhoeven 2016-07-01 8:57 ` Geert Uytterhoeven 2016-07-03 11:34 ` Yoshinori Sato 2016-07-03 11:34 ` Yoshinori Sato 2016-07-04 7:15 ` Geert Uytterhoeven 2016-07-04 7:15 ` Geert Uytterhoeven [not found] ` <CAMuHMdXPfP+A4PFy81bRoq4Va=5JpgCz2M3D6icWf0zCGTw8pA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-07-04 16:12 ` Yoshinori Sato 2016-07-04 16:12 ` Yoshinori Sato 2016-07-04 16:12 ` Yoshinori Sato 2016-06-29 13:41 ` [PATCH v4 15/22] sh: Move common PCI stuff to arch/sh/kernel Yoshinori Sato 2016-06-29 13:41 ` Yoshinori Sato 2016-06-29 13:41 ` [PATCH v4 16/22] pci: pci_config_window move to linux/pci.h Yoshinori Sato 2016-06-29 13:41 ` Yoshinori Sato 2016-06-29 13:41 ` [PATCH v4 17/22] pci: PCI_HOST_GENERIC enable for SH Yoshinori Sato 2016-06-29 13:41 ` Yoshinori Sato 2016-06-29 13:41 ` [PATCH v4 18/22] sh: Add separate DTB build rule Yoshinori Sato 2016-06-29 13:41 ` Yoshinori Sato 2016-06-29 13:41 ` [PATCH v4 19/22] sh: IO-DATA HDL-U (a,k.a landisk) IRQCHIP driver Yoshinori Sato 2016-06-29 13:41 ` Yoshinori Sato 2016-06-29 13:43 ` John Paul Adrian Glaubitz 2016-06-29 13:43 ` John Paul Adrian Glaubitz 2016-07-01 1:48 ` Rob Herring 2016-07-01 1:48 ` Rob Herring 2016-07-03 11:36 ` Yoshinori Sato 2016-07-03 11:36 ` Yoshinori Sato 2016-06-29 13:41 ` [PATCH v4 20/22] sh: IO-DATA HDL-U (a,k.a landisk) DeviceTree Yoshinori Sato 2016-06-29 13:41 ` Yoshinori Sato 2016-06-29 13:41 ` [PATCH v4 21/22] sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) IRQCHIP Driver Yoshinori Sato 2016-06-29 13:41 ` Yoshinori Sato 2016-07-01 1:53 ` Rob Herring 2016-07-01 1:53 ` Rob Herring 2016-07-03 11:35 ` Yoshinori Sato 2016-07-03 11:35 ` Yoshinori Sato 2016-06-29 13:41 ` [PATCH v4 22/22] sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) DeviceTree Yoshinori Sato 2016-06-29 13:41 ` Yoshinori Sato 2016-06-29 14:16 ` Sergei Shtylyov 2016-06-29 14:16 ` Sergei Shtylyov 2016-06-30 14:47 ` Yoshinori Sato 2016-06-30 14:47 ` Yoshinori Sato
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1467207667-15768-15-git-send-email-ysato@users.sourceforge.jp \ --to=ysato@users.sourceforge.jp \ --cc=devicetree@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sh@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.