From: Andi Shyti <andi.shyti@samsung.com> To: Chanwoo Choi <cw00.choi@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <k.kozlowski@samsung.com>, linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Andi Shyti <andi.shyti@samsung.com>, Andi Shyti <andi@etezian.org> Subject: [PATCH v3 1/2] clk: exynos5433: do not use CLK_IGNORE_UNUSED for SPI clocks Date: Thu, 30 Jun 2016 16:15:10 +0900 [thread overview] Message-ID: <1467270911-10971-2-git-send-email-andi.shyti@samsung.com> (raw) In-Reply-To: <1467270911-10971-1-git-send-email-andi.shyti@samsung.com> The CLK_IGNORE_UNUSED flag has to be avoided whenever possible. Use the CLK_IS_CRITICAL flag instead for critical SPI1 clocks, which enables the clock line during boot time. Suggested-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> --- drivers/clk/samsung/clk-exynos5433.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index c3a5318..1f7c4951 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -1662,7 +1662,7 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = { ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in", ENABLE_SCLK_PERIC, 12, - CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0), + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in", ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk", @@ -1677,7 +1677,7 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = { GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC, 5, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC, - 4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0), + 4, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric", -- 2.8.1
WARNING: multiple messages have this Message-ID (diff)
From: andi.shyti@samsung.com (Andi Shyti) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 1/2] clk: exynos5433: do not use CLK_IGNORE_UNUSED for SPI clocks Date: Thu, 30 Jun 2016 16:15:10 +0900 [thread overview] Message-ID: <1467270911-10971-2-git-send-email-andi.shyti@samsung.com> (raw) In-Reply-To: <1467270911-10971-1-git-send-email-andi.shyti@samsung.com> The CLK_IGNORE_UNUSED flag has to be avoided whenever possible. Use the CLK_IS_CRITICAL flag instead for critical SPI1 clocks, which enables the clock line during boot time. Suggested-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> --- drivers/clk/samsung/clk-exynos5433.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index c3a5318..1f7c4951 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -1662,7 +1662,7 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = { ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in", ENABLE_SCLK_PERIC, 12, - CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0), + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in", ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk", @@ -1677,7 +1677,7 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = { GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC, 5, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC, - 4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0), + 4, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric", -- 2.8.1
next prev parent reply other threads:[~2016-06-30 7:16 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-30 7:15 [PATCH v3 0/2] mark spi clocks as critical and enable spi3 clocks Andi Shyti 2016-06-30 7:15 ` Andi Shyti 2016-06-30 7:15 ` Andi Shyti 2016-06-30 7:15 ` Andi Shyti [this message] 2016-06-30 7:15 ` [PATCH v3 1/2] clk: exynos5433: do not use CLK_IGNORE_UNUSED for SPI clocks Andi Shyti 2016-07-04 9:40 ` Sylwester Nawrocki 2016-07-04 9:40 ` Sylwester Nawrocki 2016-07-04 10:26 ` Andi Shyti 2016-07-04 10:26 ` Andi Shyti 2016-07-04 15:15 ` Sylwester Nawrocki 2016-07-04 15:15 ` Sylwester Nawrocki 2016-07-06 4:51 ` Andi Shyti 2016-07-06 4:51 ` Andi Shyti 2016-07-06 10:40 ` Sylwester Nawrocki 2016-07-06 10:40 ` Sylwester Nawrocki 2016-06-30 7:15 ` [PATCH v3 2/2] clk: exynos5433: enable sclk_ioclk for SPI3 Andi Shyti 2016-06-30 7:15 ` Andi Shyti 2016-06-30 7:15 ` Andi Shyti 2016-07-04 3:59 ` [PATCH v3 0/2] mark spi clocks as critical and enable spi3 clocks Tomasz Figa 2016-07-04 3:59 ` Tomasz Figa 2016-07-04 3:59 ` Tomasz Figa 2016-07-04 4:20 ` Andi Shyti 2016-07-04 4:20 ` Andi Shyti 2016-07-04 4:20 ` Andi Shyti 2016-07-04 4:55 ` Tomasz Figa 2016-07-04 4:55 ` Tomasz Figa 2016-07-04 4:55 ` Tomasz Figa
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1467270911-10971-2-git-send-email-andi.shyti@samsung.com \ --to=andi.shyti@samsung.com \ --cc=andi@etezian.org \ --cc=cw00.choi@samsung.com \ --cc=jh80.chung@samsung.com \ --cc=k.kozlowski@samsung.com \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=s.nawrocki@samsung.com \ --cc=sboyd@codeaurora.org \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.