* [GIT PULL 0/3] BCM2835 pull requests for 4.8
@ 2016-07-04 0:45 ` Eric Anholt
0 siblings, 0 replies; 16+ messages in thread
From: Eric Anholt @ 2016-07-04 0:45 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones, Eric Anholt
It looks like we didn't get an updated defconfig patch while I was
gone, so I'm sending my pull requests for Pi3 and ethernet in the DT
now (the same stuff that's been in -next the whole time). I think
it's still worth it to have Pi3 present in 4.8, even if we don't have
the defconfig in place yet.
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 0/3] BCM2835 pull requests for 4.8
@ 2016-07-04 0:45 ` Eric Anholt
0 siblings, 0 replies; 16+ messages in thread
From: Eric Anholt @ 2016-07-04 0:45 UTC (permalink / raw)
To: linux-arm-kernel
It looks like we didn't get an updated defconfig patch while I was
gone, so I'm sending my pull requests for Pi3 and ethernet in the DT
now (the same stuff that's been in -next the whole time). I think
it's still worth it to have Pi3 present in 4.8, even if we don't have
the defconfig in place yet.
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 1/3] bcm2835-dt-next-2016-07-03
2016-07-04 0:45 ` Eric Anholt
@ 2016-07-04 0:45 ` Eric Anholt
-1 siblings, 0 replies; 16+ messages in thread
From: Eric Anholt @ 2016-07-04 0:45 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones, Eric Anholt
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-dt-next-2016-07-03
for you to fetch changes up to 6a93792774fc72861b7e8efaa3545a88272b4413:
ARM: bcm2835: dt: Add the ethernet to the device trees (2016-05-31 10:32:34 -0700)
----------------------------------------------------------------
This pull request brings in the change to describe the ethernet in the
DT so that the firmware can tell us its MAC address.
----------------------------------------------------------------
Lubomir Rintel (1):
ARM: bcm2835: dt: Add the ethernet to the device trees
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 +
arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/bcm283x.dtsi | 2 ++
7 files changed, 44 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
^ permalink raw reply [flat|nested] 16+ messages in thread* [GIT PULL 1/3] bcm2835-dt-next-2016-07-03
@ 2016-07-04 0:45 ` Eric Anholt
0 siblings, 0 replies; 16+ messages in thread
From: Eric Anholt @ 2016-07-04 0:45 UTC (permalink / raw)
To: linux-arm-kernel
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-dt-next-2016-07-03
for you to fetch changes up to 6a93792774fc72861b7e8efaa3545a88272b4413:
ARM: bcm2835: dt: Add the ethernet to the device trees (2016-05-31 10:32:34 -0700)
----------------------------------------------------------------
This pull request brings in the change to describe the ethernet in the
DT so that the firmware can tell us its MAC address.
----------------------------------------------------------------
Lubomir Rintel (1):
ARM: bcm2835: dt: Add the ethernet to the device trees
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 +
arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/bcm283x.dtsi | 2 ++
7 files changed, 44 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [GIT PULL 1/3] bcm2835-dt-next-2016-07-03
2016-07-04 0:45 ` Eric Anholt
@ 2016-07-06 3:46 ` Florian Fainelli
-1 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2016-07-06 3:46 UTC (permalink / raw)
To: Eric Anholt
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones
Le 03/07/2016 17:45, Eric Anholt a écrit :
> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>
> are available in the git repository at:
>
> https://github.com/anholt/linux tags/bcm2835-dt-next-2016-07-03
>
> for you to fetch changes up to 6a93792774fc72861b7e8efaa3545a88272b4413:
>
> ARM: bcm2835: dt: Add the ethernet to the device trees (2016-05-31 10:32:34 -0700)
>
> ----------------------------------------------------------------
> This pull request brings in the change to describe the ethernet in the
> DT so that the firmware can tell us its MAC address.
>
> ----------------------------------------------------------------
> Lubomir Rintel (1):
> ARM: bcm2835: dt: Add the ethernet to the device trees
Merged, thanks!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 1/3] bcm2835-dt-next-2016-07-03
@ 2016-07-06 3:46 ` Florian Fainelli
0 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2016-07-06 3:46 UTC (permalink / raw)
To: linux-arm-kernel
Le 03/07/2016 17:45, Eric Anholt a ?crit :
> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>
> are available in the git repository at:
>
> https://github.com/anholt/linux tags/bcm2835-dt-next-2016-07-03
>
> for you to fetch changes up to 6a93792774fc72861b7e8efaa3545a88272b4413:
>
> ARM: bcm2835: dt: Add the ethernet to the device trees (2016-05-31 10:32:34 -0700)
>
> ----------------------------------------------------------------
> This pull request brings in the change to describe the ethernet in the
> DT so that the firmware can tell us its MAC address.
>
> ----------------------------------------------------------------
> Lubomir Rintel (1):
> ARM: bcm2835: dt: Add the ethernet to the device trees
Merged, thanks!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 2/3] bcm2835-dt-64-next-2016-07-03
2016-07-04 0:45 ` Eric Anholt
@ 2016-07-04 0:45 ` Eric Anholt
-1 siblings, 0 replies; 16+ messages in thread
From: Eric Anholt @ 2016-07-04 0:45 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones, Eric Anholt
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-dt-64-next-2016-07-03
for you to fetch changes up to 02d08603649816a941246c18252e5c41fd07625a:
ARM: bcm2837: dt: Add the ethernet to the device trees (2016-06-07 15:23:08 -0700)
----------------------------------------------------------------
This pull request brings in the Raspberry Pi 3 DT for its arm64
support. Note that it also merges in the ethernet DT changes so that
the Pi3's ethernet can also get the MAC address.
----------------------------------------------------------------
Eric Anholt (3):
dt-bindings: Add root properties for Raspberry Pi 3
ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
Merge tag 'bcm2835-dt-ethernet' into HEAD
Gerd Hoffmann (1):
ARM: bcm2837: dt: Add the ethernet to the device trees
Lubomir Rintel (1):
ARM: bcm2835: dt: Add the ethernet to the device trees
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 +
arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 19 ++++++
arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 ++++++
arch/arm/boot/dts/bcm283x.dtsi | 2 +
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 30 +++++++++
arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 76 ++++++++++++++++++++++
11 files changed, 155 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837.dtsi
^ permalink raw reply [flat|nested] 16+ messages in thread* [GIT PULL 2/3] bcm2835-dt-64-next-2016-07-03
@ 2016-07-04 0:45 ` Eric Anholt
0 siblings, 0 replies; 16+ messages in thread
From: Eric Anholt @ 2016-07-04 0:45 UTC (permalink / raw)
To: linux-arm-kernel
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-dt-64-next-2016-07-03
for you to fetch changes up to 02d08603649816a941246c18252e5c41fd07625a:
ARM: bcm2837: dt: Add the ethernet to the device trees (2016-06-07 15:23:08 -0700)
----------------------------------------------------------------
This pull request brings in the Raspberry Pi 3 DT for its arm64
support. Note that it also merges in the ethernet DT changes so that
the Pi3's ethernet can also get the MAC address.
----------------------------------------------------------------
Eric Anholt (3):
dt-bindings: Add root properties for Raspberry Pi 3
ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
Merge tag 'bcm2835-dt-ethernet' into HEAD
Gerd Hoffmann (1):
ARM: bcm2837: dt: Add the ethernet to the device trees
Lubomir Rintel (1):
ARM: bcm2835: dt: Add the ethernet to the device trees
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 +
arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 19 ++++++
arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 ++++++
arch/arm/boot/dts/bcm283x.dtsi | 2 +
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 30 +++++++++
arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 76 ++++++++++++++++++++++
11 files changed, 155 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837.dtsi
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [GIT PULL 2/3] bcm2835-dt-64-next-2016-07-03
2016-07-04 0:45 ` Eric Anholt
@ 2016-07-06 3:48 ` Florian Fainelli
-1 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2016-07-06 3:48 UTC (permalink / raw)
To: Eric Anholt
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones
Le 03/07/2016 17:45, Eric Anholt a écrit :
> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>
> are available in the git repository at:
>
> https://github.com/anholt/linux tags/bcm2835-dt-64-next-2016-07-03
>
> for you to fetch changes up to 02d08603649816a941246c18252e5c41fd07625a:
>
> ARM: bcm2837: dt: Add the ethernet to the device trees (2016-06-07 15:23:08 -0700)
>
> ----------------------------------------------------------------
> This pull request brings in the Raspberry Pi 3 DT for its arm64
> support. Note that it also merges in the ethernet DT changes so that
> the Pi3's ethernet can also get the MAC address.
>
> ----------------------------------------------------------------
> Eric Anholt (3):
> dt-bindings: Add root properties for Raspberry Pi 3
> ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
> Merge tag 'bcm2835-dt-ethernet' into HEAD
>
> Gerd Hoffmann (1):
> ARM: bcm2837: dt: Add the ethernet to the device trees
>
> Lubomir Rintel (1):
> ARM: bcm2835: dt: Add the ethernet to the device trees
Merged, thanks Eric!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 2/3] bcm2835-dt-64-next-2016-07-03
@ 2016-07-06 3:48 ` Florian Fainelli
0 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2016-07-06 3:48 UTC (permalink / raw)
To: linux-arm-kernel
Le 03/07/2016 17:45, Eric Anholt a ?crit :
> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>
> are available in the git repository at:
>
> https://github.com/anholt/linux tags/bcm2835-dt-64-next-2016-07-03
>
> for you to fetch changes up to 02d08603649816a941246c18252e5c41fd07625a:
>
> ARM: bcm2837: dt: Add the ethernet to the device trees (2016-06-07 15:23:08 -0700)
>
> ----------------------------------------------------------------
> This pull request brings in the Raspberry Pi 3 DT for its arm64
> support. Note that it also merges in the ethernet DT changes so that
> the Pi3's ethernet can also get the MAC address.
>
> ----------------------------------------------------------------
> Eric Anholt (3):
> dt-bindings: Add root properties for Raspberry Pi 3
> ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
> Merge tag 'bcm2835-dt-ethernet' into HEAD
>
> Gerd Hoffmann (1):
> ARM: bcm2837: dt: Add the ethernet to the device trees
>
> Lubomir Rintel (1):
> ARM: bcm2835: dt: Add the ethernet to the device trees
Merged, thanks Eric!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 3/3] bcm2835-arm64-next-2016-07-03
2016-07-04 0:45 ` Eric Anholt
@ 2016-07-04 0:45 ` Eric Anholt
-1 siblings, 0 replies; 16+ messages in thread
From: Eric Anholt @ 2016-07-04 0:45 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones, Eric Anholt
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-arm64-next-2016-07-03
for you to fetch changes up to 628d30d1ccb897fee54a6f7312561cf2f6f72f09:
arm64: Add platform selection for BCM2835. (2016-06-15 14:10:30 -0700)
----------------------------------------------------------------
This pull request brings in the build support for the Raspberry Pi
arm64 port.
----------------------------------------------------------------
Alexander Graf (1):
arm64: Allow for different DMA and CPU bus offsets
Eric Anholt (3):
irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ
Merge remote-tracking branch 'irqchip/irqchip/bcm' into bcm2835-arm64-next
arm64: Add platform selection for BCM2835.
arch/arm64/Kconfig.platforms | 13 +++++++++++++
arch/arm64/include/asm/dma-mapping.h | 17 +++++++++++++++--
drivers/irqchip/irq-bcm2835.c | 3 +--
drivers/irqchip/irq-bcm2836.c | 2 +-
4 files changed, 30 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 16+ messages in thread* [GIT PULL 3/3] bcm2835-arm64-next-2016-07-03
@ 2016-07-04 0:45 ` Eric Anholt
0 siblings, 0 replies; 16+ messages in thread
From: Eric Anholt @ 2016-07-04 0:45 UTC (permalink / raw)
To: linux-arm-kernel
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-arm64-next-2016-07-03
for you to fetch changes up to 628d30d1ccb897fee54a6f7312561cf2f6f72f09:
arm64: Add platform selection for BCM2835. (2016-06-15 14:10:30 -0700)
----------------------------------------------------------------
This pull request brings in the build support for the Raspberry Pi
arm64 port.
----------------------------------------------------------------
Alexander Graf (1):
arm64: Allow for different DMA and CPU bus offsets
Eric Anholt (3):
irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ
Merge remote-tracking branch 'irqchip/irqchip/bcm' into bcm2835-arm64-next
arm64: Add platform selection for BCM2835.
arch/arm64/Kconfig.platforms | 13 +++++++++++++
arch/arm64/include/asm/dma-mapping.h | 17 +++++++++++++++--
drivers/irqchip/irq-bcm2835.c | 3 +--
drivers/irqchip/irq-bcm2836.c | 2 +-
4 files changed, 30 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [GIT PULL 3/3] bcm2835-arm64-next-2016-07-03
2016-07-04 0:45 ` Eric Anholt
@ 2016-07-05 18:03 ` Jason Cooper
-1 siblings, 0 replies; 16+ messages in thread
From: Jason Cooper @ 2016-07-05 18:03 UTC (permalink / raw)
To: Eric Anholt
Cc: Florian Fainelli, linux-rpi-kernel, linux-arm-kernel,
linux-kernel, Stephen Warren, Lee Jones
Eric,
On Sun, Jul 03, 2016 at 05:45:36PM -0700, Eric Anholt wrote:
> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>
> are available in the git repository at:
>
> https://github.com/anholt/linux tags/bcm2835-arm64-next-2016-07-03
>
> for you to fetch changes up to 628d30d1ccb897fee54a6f7312561cf2f6f72f09:
>
> arm64: Add platform selection for BCM2835. (2016-06-15 14:10:30 -0700)
>
> ----------------------------------------------------------------
> This pull request brings in the build support for the Raspberry Pi
> arm64 port.
>
> ----------------------------------------------------------------
> Alexander Graf (1):
> arm64: Allow for different DMA and CPU bus offsets
>
> Eric Anholt (3):
> irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ
> Merge remote-tracking branch 'irqchip/irqchip/bcm' into bcm2835-arm64-next
You may want to draw attention to the fact that this has an external
dependency on my irqchip/bcm branch. Also, that it's stable, been in
-next for a couple of weeks, and based on v4.7-rc1, etc.
thx,
Jason.
> arm64: Add platform selection for BCM2835.
>
> arch/arm64/Kconfig.platforms | 13 +++++++++++++
> arch/arm64/include/asm/dma-mapping.h | 17 +++++++++++++++--
> drivers/irqchip/irq-bcm2835.c | 3 +--
> drivers/irqchip/irq-bcm2836.c | 2 +-
> 4 files changed, 30 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 3/3] bcm2835-arm64-next-2016-07-03
@ 2016-07-05 18:03 ` Jason Cooper
0 siblings, 0 replies; 16+ messages in thread
From: Jason Cooper @ 2016-07-05 18:03 UTC (permalink / raw)
To: linux-arm-kernel
Eric,
On Sun, Jul 03, 2016 at 05:45:36PM -0700, Eric Anholt wrote:
> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>
> are available in the git repository at:
>
> https://github.com/anholt/linux tags/bcm2835-arm64-next-2016-07-03
>
> for you to fetch changes up to 628d30d1ccb897fee54a6f7312561cf2f6f72f09:
>
> arm64: Add platform selection for BCM2835. (2016-06-15 14:10:30 -0700)
>
> ----------------------------------------------------------------
> This pull request brings in the build support for the Raspberry Pi
> arm64 port.
>
> ----------------------------------------------------------------
> Alexander Graf (1):
> arm64: Allow for different DMA and CPU bus offsets
>
> Eric Anholt (3):
> irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ
> Merge remote-tracking branch 'irqchip/irqchip/bcm' into bcm2835-arm64-next
You may want to draw attention to the fact that this has an external
dependency on my irqchip/bcm branch. Also, that it's stable, been in
-next for a couple of weeks, and based on v4.7-rc1, etc.
thx,
Jason.
> arm64: Add platform selection for BCM2835.
>
> arch/arm64/Kconfig.platforms | 13 +++++++++++++
> arch/arm64/include/asm/dma-mapping.h | 17 +++++++++++++++--
> drivers/irqchip/irq-bcm2835.c | 3 +--
> drivers/irqchip/irq-bcm2836.c | 2 +-
> 4 files changed, 30 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [GIT PULL 3/3] bcm2835-arm64-next-2016-07-03
2016-07-05 18:03 ` Jason Cooper
@ 2016-07-06 3:50 ` Florian Fainelli
-1 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2016-07-06 3:50 UTC (permalink / raw)
To: Jason Cooper, Eric Anholt
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones
Le 05/07/2016 11:03, Jason Cooper a écrit :
> Eric,
>
> On Sun, Jul 03, 2016 at 05:45:36PM -0700, Eric Anholt wrote:
>> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>>
>> are available in the git repository at:
>>
>> https://github.com/anholt/linux tags/bcm2835-arm64-next-2016-07-03
>>
>> for you to fetch changes up to 628d30d1ccb897fee54a6f7312561cf2f6f72f09:
>>
>> arm64: Add platform selection for BCM2835. (2016-06-15 14:10:30 -0700)
>>
>> ----------------------------------------------------------------
>> This pull request brings in the build support for the Raspberry Pi
>> arm64 port.
>>
>> ----------------------------------------------------------------
>> Alexander Graf (1):
>> arm64: Allow for different DMA and CPU bus offsets
>>
>> Eric Anholt (3):
>> irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ
>> Merge remote-tracking branch 'irqchip/irqchip/bcm' into bcm2835-arm64-next
>
> You may want to draw attention to the fact that this has an external
> dependency on my irqchip/bcm branch. Also, that it's stable, been in
> -next for a couple of weeks, and based on v4.7-rc1, etc.
Thanks for the heads-up, merged and updated the merge commit to make
this clear, thanks everyone.
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 3/3] bcm2835-arm64-next-2016-07-03
@ 2016-07-06 3:50 ` Florian Fainelli
0 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2016-07-06 3:50 UTC (permalink / raw)
To: linux-arm-kernel
Le 05/07/2016 11:03, Jason Cooper a ?crit :
> Eric,
>
> On Sun, Jul 03, 2016 at 05:45:36PM -0700, Eric Anholt wrote:
>> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>>
>> are available in the git repository at:
>>
>> https://github.com/anholt/linux tags/bcm2835-arm64-next-2016-07-03
>>
>> for you to fetch changes up to 628d30d1ccb897fee54a6f7312561cf2f6f72f09:
>>
>> arm64: Add platform selection for BCM2835. (2016-06-15 14:10:30 -0700)
>>
>> ----------------------------------------------------------------
>> This pull request brings in the build support for the Raspberry Pi
>> arm64 port.
>>
>> ----------------------------------------------------------------
>> Alexander Graf (1):
>> arm64: Allow for different DMA and CPU bus offsets
>>
>> Eric Anholt (3):
>> irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ
>> Merge remote-tracking branch 'irqchip/irqchip/bcm' into bcm2835-arm64-next
>
> You may want to draw attention to the fact that this has an external
> dependency on my irqchip/bcm branch. Also, that it's stable, been in
> -next for a couple of weeks, and based on v4.7-rc1, etc.
Thanks for the heads-up, merged and updated the merge commit to make
this clear, thanks everyone.
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2016-07-06 3:51 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-04 0:45 [GIT PULL 0/3] BCM2835 pull requests for 4.8 Eric Anholt
2016-07-04 0:45 ` Eric Anholt
2016-07-04 0:45 ` [GIT PULL 1/3] bcm2835-dt-next-2016-07-03 Eric Anholt
2016-07-04 0:45 ` Eric Anholt
2016-07-06 3:46 ` Florian Fainelli
2016-07-06 3:46 ` Florian Fainelli
2016-07-04 0:45 ` [GIT PULL 2/3] bcm2835-dt-64-next-2016-07-03 Eric Anholt
2016-07-04 0:45 ` Eric Anholt
2016-07-06 3:48 ` Florian Fainelli
2016-07-06 3:48 ` Florian Fainelli
2016-07-04 0:45 ` [GIT PULL 3/3] bcm2835-arm64-next-2016-07-03 Eric Anholt
2016-07-04 0:45 ` Eric Anholt
2016-07-05 18:03 ` Jason Cooper
2016-07-05 18:03 ` Jason Cooper
2016-07-06 3:50 ` Florian Fainelli
2016-07-06 3:50 ` Florian Fainelli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.