All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ziyuan Xu <xzy.xu@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4.1 3/4] rockchip: rk3288: add fastboot support
Date: Fri, 15 Jul 2016 00:26:59 +0800	[thread overview]
Message-ID: <1468513619-5864-1-git-send-email-xzy.xu@rock-chips.com> (raw)
In-Reply-To: <1468479155-1796-4-git-send-email-xzy.xu@rock-chips.com>

From: Xu Ziyuan <xzy.xu@rock-chips.com>

Enable fastboot feature on rk3288.

This path doesn't support the fastboot flash function command entirely.
We will hit "cannot find partition" assertion without specified
partition environment. Define gpt partition layout in specified board
such as firefly-rk3288, then enjoy it!

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>

---

Changes in v4.1:
- Revise tx_fifo_sz to 128

Changes in v4:
- Add fifo size for rk3288
- Get usb_phy's dt_node

Changes in v3:
- Achieve UOC_CON_OFFSET physical address from DT

Changes in v2:
- Achieve the regs_phy from DT
- Update comments a little

 arch/arm/dts/rk3288.dtsi        |  1 +
 arch/arm/mach-rockchip/board.c  | 72 +++++++++++++++++++++++++++++++++++++++++
 include/configs/rk3288_common.h | 26 +++++++++++++++
 3 files changed, 99 insertions(+)

diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
index 3dab0fc..bcf051a 100644
--- a/arch/arm/dts/rk3288.dtsi
+++ b/arch/arm/dts/rk3288.dtsi
@@ -454,6 +454,7 @@
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG0>;
 		clock-names = "otg";
+		dr_mode = "otg";
 		phys = <&usbphy0>;
 		phy-names = "usb2-phy";
 		status = "disabled";
diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c
index 816540e..1458e80 100644
--- a/arch/arm/mach-rockchip/board.c
+++ b/arch/arm/mach-rockchip/board.c
@@ -52,6 +52,78 @@ void lowlevel_init(void)
 {
 }
 
+#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
+#include <usb.h>
+#include <usb/dwc2_udc.h>
+
+static struct dwc2_plat_otg_data rk3288_otg_data = {
+	.rx_fifo_sz	= 512,
+	.np_tx_fifo_sz	= 16,
+	.tx_fifo_sz	= 128,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	int node, phy_node;
+	const char *mode;
+	bool matched = false;
+	const void *blob = gd->fdt_blob;
+	u32 grf_phy_offset;
+
+	/* find the usb_otg node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					"rockchip,rk3288-usb");
+
+	while (node > 0) {
+		mode = fdt_getprop(blob, node, "dr_mode", NULL);
+		if (mode && strcmp(mode, "otg") == 0) {
+			matched = true;
+			break;
+		}
+
+		node = fdt_node_offset_by_compatible(blob, node,
+					"rockchip,rk3288-usb");
+	}
+	if (!matched) {
+		debug("Not found usb_otg device\n");
+		return -ENODEV;
+	}
+	rk3288_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
+
+	node = fdtdec_lookup_phandle(blob, node, "phys");
+	if (node <= 0) {
+		debug("Not found usb phy device\n");
+		return -ENODEV;
+	}
+
+	phy_node = fdt_parent_offset(blob, node);
+	if (phy_node <= 0) {
+		debug("Not found usb phy device\n");
+		return -ENODEV;
+	}
+
+	rk3288_otg_data.phy_of_node = phy_node;
+	grf_phy_offset = fdtdec_get_addr(blob, node, "reg");
+
+	/* find the grf node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					"rockchip,rk3288-grf");
+	if (node <= 0) {
+		debug("Not found grf device\n");
+		return -ENODEV;
+	}
+	rk3288_otg_data.regs_phy = grf_phy_offset +
+				fdtdec_get_addr(blob, node, "reg");
+
+	return dwc2_udc_probe(&rk3288_otg_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	return 0;
+}
+#endif
+
 static int do_clock(cmd_tbl_t *cmdtp, int flag, int argc,
 		       char * const argv[])
 {
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index 8adc26f..2040cdd 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -79,6 +79,32 @@
 #define CONFIG_SPI
 #define CONFIG_SF_DEFAULT_SPEED 20000000
 
+/* usb otg */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_DWC2_OTG
+#define CONFIG_ROCKCHIP_USB2_PHY
+#define CONFIG_USB_GADGET_VBUS_DRAW	0
+
+/* fastboot  */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV	1	/* eMMC */
+/* stroe safely fastboot buffer data to the middle of bank */
+#define CONFIG_FASTBOOT_BUF_ADDR	(CONFIG_SYS_SDRAM_BASE \
+					+ SDRAM_BANK_SIZE / 2)
+#define CONFIG_FASTBOOT_BUF_SIZE	0x08000000
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_G_DNL_MANUFACTURER	"Rockchip"
+#define CONFIG_G_DNL_VENDOR_NUM		0x2207
+#define CONFIG_G_DNL_PRODUCT_NUM	0x320a
+
+/* Enable gpt partition table */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+
 #ifndef CONFIG_SPL_BUILD
 #include <config_distro_defaults.h>
 
-- 
1.9.1

  parent reply	other threads:[~2016-07-14 16:26 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-14  6:52 [U-Boot] [PATCH v4 0/4] rockchip: rk3288: add fastboot support Ziyuan Xu
2016-07-14  6:52 ` [U-Boot] [PATCH v4 1/4] usb: rockchip-phy: implement USB2.0 phy control Ziyuan Xu
2016-07-15  3:20   ` Simon Glass
2016-07-15  3:56     ` Simon Glass
2016-07-14  6:52 ` [U-Boot] [PATCH v4 2/4] usb: dwc2-otg: adjust fifo size via platform data Ziyuan Xu
2016-07-15  3:20   ` Simon Glass
2016-07-15  3:56     ` Simon Glass
2016-07-16  5:43       ` Marek Vasut
2016-07-16 20:59         ` Simon Glass
2016-07-14  6:52 ` [U-Boot] [PATCH v4 3/4] rockchip: rk3288: add fastboot support Ziyuan Xu
2016-07-14 11:06   ` William.wu
2016-07-14 15:51     ` Ziyuan Xu
2016-07-14 16:26   ` Ziyuan Xu [this message]
2016-07-15  3:20     ` [U-Boot] [PATCH v4.1 " Simon Glass
2016-07-15 14:05       ` Ziyuan Xu
2016-07-15 14:38         ` Simon Glass
2016-07-16 22:31       ` Simon Glass
2016-07-14  6:52 ` [U-Boot] [PATCH v4 4/4] usb: dwc2 : invalidate dcache before starting DMA Ziyuan Xu
2016-07-15  3:20   ` Simon Glass
2016-07-15  3:56     ` Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468513619-5864-1-git-send-email-xzy.xu@rock-chips.com \
    --to=xzy.xu@rock-chips.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.